Need to stop Windows 10 message when connecting. Does not occur with IE

Similar Questions

• Force the print to stop/restart spooler service when it does not

  Our office has a HP plotter, where the driver (note that we have the latest version, directly from the HP site) seems to cause the print spooler service becomes out of order sometimes.  In turn of the programs (including AutoCAD and Outlook) to lock, as well as windows, as the dialog box, which causes devices and printers.

  If I restart the 'Services' print spooler service in computer management, it goes back to work at least some time - if at least I can work around the problem.  It is important to note however, that even by using this method, it throws a dialog box error saying that the service failed.  But since this is a question with all facilities of this liner installed with Vista, I need to have a method easier to use of the service is restarted.

  I wrote a file .bat base with a net stop spooler command followed by a net start spooler command, but the problem is that, unlike with computer management, net stop does not seem to force the service to shut down if it does not, and I can't find a way to force the stop command.

  Is there a tool more powerful/switch available that I could script so that users can easily stop and restart the spooler service when it does not?

  Thank you

  Type sc /?

  --
  ..
  --
  "mgarrison" wrote in message news: d3d768a8-126-b-4246-a4d8-ca6d8f4db6a7...
  > Our Office has a HP plotter, which the driver (note that we later
  (> version, directly from the HP site) seems to cause the print spooler
  > service becomes out of order sometimes. Which causes in turn of programs
  > (including AutoCAD and Outlook) to put him away, windows as the
  dialogue of the RHS.
  >
  > If I restart the spooler service for printing of 'Services' in computer science
  > Management, she goes back to work for at least some time - if at least I have
  > can work around the problem. It is important to note however, that even
  > by using this method, it throws an error dialog box saying that the service
  > did not. But since this is a problem with our Vista
  > facilities having this installed plotter, I need to have a more
  > user-friendly method of restarting the service.
  >
  > I wrote a .bat file to base with a net stop command spooler followed by a
  > net start spooler command, but the problem is that, unlike with a computer
  > Management, net stop does not seem to force the service stops if it is not
  > answer and I cannot find a way to force the stop command.
  >
  > Is there a tool more powerful/switch available that I could then script
  > users can easily stop and restart the spooler service when it is not
  > sensitive?
  >
  > Thank you

• Cannot install WIndows XP SP3 - wireless adapter does not work with any package of service beyond 2.0

  original title: wireless adapter does not work with any package of service beyond 2.0

  I have an AirLiink 101 wireless adapter.  Anyone know how to change the service pack 3.0 for me to update my Windows XP?   Can not install 3.1 without losing wireless connection.

  Thanks for any help.

  If you are on a wireless connection, try to switch to a wired connection and try the download with Internet Explorer.

  UTC/GMT is 06:49 on Wednesday, April 11, 2012

• Socket connection does not work with SIM network

  Hi all

  I created a socket connection. It works fine when I use the WiFi and iam able to download the data and get a correct answer successfully.   But when I use the network GPRS/SIM I get "Unauthorized response" as an answer. I already check with the default blackberry, here internet browser works very well.

  Can someone tell me why socket connection does not work when I use the SIM card network.

  If anyone knows about internal or the following BlackBerry setting that also tell me

  "Option-> advanced-> TCP Option.

  Thank you

  Neeraj Chauhan

  Thanks Peter,.

  For your support... Now my application works very well in both cases (SIM and Wi - Fi network). So I close my ticket.

  Thank you & best regards

  Neeraj Chauhan

• Installation of the printer driver Officejet G85 fails with the message "print processor does not exist" with Windows 7

  The site compatibility Windows 7 says that this OS is compatible with my Officejet G85 all-in-one old.  Whenever I try to add this printer is using the automatic functions or manual installation of the driver fails and I get the error message that "print processor does not exist.  I tried to install the original with the most recent compatibility software is Windows 2000, but Windows 7 does not allow indicating that the program already exists and I have to uninstall it first.  However, I can't find it listed anywhere for uninstall it, and the original software disk does not have this feature either.  HP does not support printer and would not help provide.  This printer worked perfectly with Windows XP and we really like it is equipped.  Please help us raise this printer up and running with Windows 7 64 bit home edition.  I tried things I found that it was similar in the forum with no success so far.

  Hello

  You can run the printer troubleshooter. Convenience store solves some common printing problems.

  If your computer has problems printing, try using the printer Troubleshooter to solve the problem. He made sure that a printer is connected to your computer, and it checks for common issues such as whether the printer has enough paper and toner to complete printing your document.

  Open the printer Troubleshooter by clicking the Start button, then Control Panel. In the search box, type troubleshooting, and then click Troubleshooting. Under hardware and sound, click on use printer.

  Reference:

  Open the printer Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  See the following articles from Microsoft for more information on installing a printer or driver printer:

  Install a printer
  http://Windows.Microsoft.com/en-us/Windows7/install-a-printer

  Find and install printer drivers
  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

  If the problem persists, you can contact the manufacturer of the printer for more information.

  http://WWW8.HP.com/ca/en/support-drivers.html

  Hope this information helps.

• Why adobe watermark connection does not work with Windows 10?

  I have install Windows 10 in my computer and now does not have the watermark of buffering! My photoshop is CS5...

  anyone has any ideas to solve the problem?

  Sorry for my English

  Sonia

  Have you tried a reset of the watermark Panel preferences?

  

  Have you tried to reinstall the watermark Panel?

• Profile TB of Windows 7 on old pc does not work with Win 10 TB on new pc

  I have a new pc running Windows 10. I'm migrating my TB profile form the old pc that works under Windows 7. When I copy just the profile copy the old TB pc to the new PC, TB does not seem to recognize it. I even tried to keep the TB to create a new profile on the new pc, then replace with the old pc profile, in the profile name the same as the name of the new profile. That is, just replace the content of the profile created with the old profile.

  The problem is that none of the old profile information seems to be used. In particular, none of the folder structure for the 4 accounts that I appear.

  I think there was a restructuring of the profile in version 10 of Windows compared to the version of Windows 7. Is it possible to migrate my data without having to manually recreate?

  Thank you
  Tim

  Just a note for the future. Make it obvious what are your personal skills. Most of the silent usage down the answers and adds a lot of things that someone who knows what they are doing does not need.

• Facebook forces disconnection when running on two different computers. does not occur with Chrome

  Hello fellow Firefox users!
  This problem has recently begun, probably at the time, I started using Sync. If I use Facebook on my desktop and I am already connected from my laptop, the system requires the laptop to log off when the office sign and vice versa. It gives me the error message of "Please sign in to continue.
  That didn't used to be a problem, and I could run it on two computers at the same time if necessary. I tested the issue on Google Chrome and it does not persist here, so it's most likely a problem of Firefox/Sync. Does anyone know why this can be, and how can I solve this problem?

  Are you sync cookies/history?

• Frfx opens, showing the home page in small icon in the lower bar of Windows 7. But it does not open with a mode full screen. Tried to uninstall and download the most recent. Did not help...

  I opened Frefx and shows a small icon of homepage above the bar at the bottom of Win7. But I can't open a whole page or use Firefox. I tried to uninstall and then install a newer version, but this does not solve the problem. Had to go back to IE

  You can find your profile folder and start safe mode, manually, without using the inaccessible features.

  In Windows 7, your profile folder is usually on a path similar to this:

  \AppData\Roaming\Mozilla\Firefox\ProfilesyourusernameC:\Users\

  This article contains more information on this: profiles | How | Firefox Help. Your profile folder a usually 'default' in the name. Make a copy of this file somewhere safe.

  To start Firefox in Mode safe, close all Firefox Windows, and then hold down the SHIFT key and restart Firefox. (I got that from the article, but have not actually tested!) Then you should be able to tick the box "Reset Toolbars and controls."

  ---

  Alternatively, do you have the menus and toolbars when you started this page in the search box?

  http://dev.jeffersonscher.com/jstest.html

  If so, you could do it again and then start mode without failure there.

• I have a problem when using Google Maps, at a certain point my custards computer window and says there is a problem with the display drivers and he recovered, but it is not. Problem does not occur with Int Explorrer, so I don't think it's the computer

  When using google maps via Firefox, after asking a place which is not the General section of North America who comes up regularly, the firefox screen becomes white with a narrow banner at the top. A message appears in the lower right corner that says something on display drivers having had a problem, but now have been recovered. However, the display is not recover and the message of the banner is that Firefox is not responding. When I go to restart Firefox if I'm about to restore, the page is still frozen.
  I don't think there is a problem with my computer because it doesn't happen if I used to go to google maps, then G-cards works normally.
  This phenomenon didn't happen before the last update Google or Firefox. I used Fiefox for some years and also Google Maps on previous computers and on this one and not had it before.
  It is a relatively young computer (Asus EeSlate 121) less than a year. I have used Firefox since I bought it and until recently had no problem with Google Maps.

  I solved it myself, after the 'note' that was FF/Mozilla, just as I finished my message, commenting on what it was that my system was, I wnnt back to check my plug-ins, etc. I downloaded the latest Java, the TWO 32-bit AND 64-bit versions and latest Firefox.
  Now everything works.
  Thank you
  B.

• Explorer Windows error message: this file does not have a program associated with...

  When I click on the Windows Explorer icon in the task bar, I get the error "this file has no program associated with it for performing this action. Please install a program or, if already installed, create an association in the default programs control panel"

  When I use the command line in the C:\Windows directory and enter EXPLORER. EXE, I get this same error msg...    BUT if I add '/?' after the walk-name - it.    And continues to operate even for other functions (show all that when the cursor is over the icon in the taskbar W.E...  When all instances are closed, clicking on the taskbar Icon again gives the same error msg...

  The properties of the taskbar show the ' target: "like '% windir%\explorer.exe' the" start in: "box is empty." even with the "" shortcut key: ", missing something?"

  If it is there, where is this default programs control panel and what goes in?

  Bob K.

  Solved...

  After Googling the problem above, that I changed was the ' targe: "command '% windir%\explorer.exe' to ' % windir%\explorer.exe/n, / e, C:\" " »

  I prefer to get to the top anyway.    You can use any file name you choose.    In fact the ' / '?  seems to be enough to bring up the initial default value.

  Bob K.

• Output digital USB 6008 when connected does not

  Hi, I have an external circuit and I want to control it using materials DAQ 6008 / using LabView, I tested the digital port work (giving me 5V) but once I connect it to my circuit (PIC16f887) pin his Gimme 0V, I do not know why

  Hello

  because the NOR-6008 has an exit open collecor must connect a pull up resistor to + 5V.

  

• Panel Builder said in InDesign cs6 folio I need put up-to-date, but when even does not recognize that I have.

  I can't open a new Folio, either. I downloaded several updates, I just got CS6 through the creative cloud, I uninstalled and reinstalled and sought advice everywhere. I'm at the end of my rope here. It shouldn't be this hard.

  Go to Menu in InDesign help and click on update. Install tools DPS. If this does not help, go to http://www.adobe.com/downloads/ and install the DPS for CS6 InDesign tools.

• Windows Live Mesh for Mac does not work with Mac OS 10.7 Lion

  Maybe someone could help me with this.

  • I migrated to a disk hard again and update of Snow Leopard Lion this week
  • Live Mesh has stopped working so I downloaded the most recent distribution of MS: 15.4.5726.23, 20/07/2011 release date, which says it's for Mac, including the last OS 10.7 Lion as well.
  • It loads, wait, does nothing (the choice of unique to Quit or help menu, and then it ends after about 30 seconds, the LiveAgent not appearing.)
  • I made sure the application has access through the firewall Mac and use the stealth mode.  With stealth enabled, there are messages from the console: Live Agent is listening to 0.0.0.0:59142 proto = 6 AND Live Agent is listening to: ffff:0.0.0.0:59142 proto = 6 AND the first msg repeats.    I also disabled the firewall to test without effect if LiveAgent fails to load. Firewall of variants: with the firewall on, LiveAgent just sits with console messages above until the user clicks on the icon status agent and it then goes to the waiting interminable spinner; with the firewall off, it goes to spinner in less than 15 seconds spontaneously with the GSM, but two sets of their pop up.
  • I repeated a deinstall [app and files] / refresh-download/install process three times and got the same results.
  • In the Finder, and LaunchPad, the icon is displayed normally.
  • I reinstalled the previous version [15.4.5722.2] and the LiveAgent charges, but never decided and just hangs.
  • After doing this and made a fourth installation 15.4.5726.23, 20/07/2011, it now loads the agent but is still suspended as the previous version.
  • If after that, I have now the LiveAgent treat during initialization, but never finished.  It remains active for approximately 8 MB of RAM, but no cycles CPU are used
  • My sync folders are orphans of their source computer, although they always synchronize with my Win7 laptop.
  • I dug a little deeper trying to solve this problem.  I get the following error message if I dig in the 15.4.5726.23 app and run the executable manually:

  aarc01: ~ $ Applications/richard/Windows\ Live\ Mesh.app/Contents/MacOS/Windows\ Live\ mesh; "exit";

  Exception thrown:

  System.IO.FileLoadException: Error 0x1A88.  Debugging resource strings are not available. See http://go.microsoft.com/fwlink/?linkid=106663&Version=3.0.50908.0&File=mscorrc.dll&Key=0x1A88

  [IO. FileName_Name]

  Arguments: Microsoft.LiveFX.ResourceModel, Version = 15.4.0.0, Culture = neutral, PublicKeyToken = 7cec85d7bea7798e

  Debugging resource strings are not available. Often the key and arguments provide enough information to diagnose the problem. See http://go.microsoft.com/fwlink/?linkid=106663&Version=3.0.50908.0&File=mscorlib.dll&Key=IO.FileName_Name

  at Microsoft.MeshOperatingEnvironment.Runtime.Client.MoeRuntime.Start)

  at Microsoft.MeshOperatingEnvironment.Runtime.Client.ILFilter.ExceptionFilter.TryFilterCatchFinally (FilterDelegate filterDelegate, CatchDelegate catchDelegate, TryDelegate tryDelegate, FinallyDelegate finallyDelegate)

  I've seen this behaviour before with v.15.4.5722.2, about 4-5 months ago, but I do not remember what was the solution that solved.

  Can anyone out there advise me?

  THX in advance,

  RC

  Hello RichardCampbellVancouver,

  There is a dedicated forum dealing with problems Windows LIve Mesh. They will be better able to answer your question in the forum.

  Please transfer your question in the Windows Live Mesh Forums on the link below.
  Click on the yellow - ask a Question.

  http://windowslivehelp.com/product.aspx?ProductID=24&version=15.3.2804.0607

  Sincerely,

  Marilyn

• Satellite L30: WiFi connection does not work with wanadoo box

  I bought a L30 for my daughter for Christmas and wants all ready to go on the day, so have tried to connect to my wanadoo wireless & talk.

  Unfortunately, the laptop wireless card doesn't seem to work. He acknowledges the wanadoo box and tries to connect, but when I enter the WEP key, it searches the network for a few minutes then returns to the "If you want to connect to this network, select 'connect' page."

  I took the adapter wireless to my PC, connected to the laptop, loaded the software wanadoo wireless and connected to the Internet wireless with no problem at all. The problem seems to be with the connection itself - as the laptop detects the wireless network very easily, it just cannot connect.

  I'm not an expert and do not want to 'break' the Christmas gift from my daughter. It is too late to guarantee a replacement arrived, I have to go out & buy a wireless adapter, but deliberately, I bought a laptop with wi - fi, if deeply resent what of not working. I feel so stupid.

  Help, please!

  Hello

  Sometimes it of not possible to connect the wireless network adapter to the router because of the compatibility.
  I have a similar problem with my second notebook at home. The card is compatible with A and B WLan standard but the router support B and G.
  The WLan card is not able to connect to my router.

  However, I think that if the laptop recognizes your wireless LAN, it should be able to connect it. You can try to update the WLan driver and additional test with encryption settings disabled.