Need to Vaio Care in Windows 7 Pro recovery tool

Similar Questions

• I have a Sony Vaio VPCEB23FM. VAIO Care Troubleshooting window keeps popping up

  VAIO Care Troubleshooting window guard arise and interfere with other programs. I can barely type 3 letters without my window becomes inactive for a while. It's very frustrating. Help, please.

  When was the last time it worked correctly? Have you tried Safe Mode and see if the same problem happens?  Also, try the system restore to an earlier time when it worked correctly.

  If my post answered your question, please mark it as "accept as a Solution.

• I need a full copy of Windows 10 Pro

  I have a P910 ThinkStation second on command, and I need to have a full copy of Windows 10 Pro on a flash drive in the event of another disaster.

  I have not received response from Levono people other than "they don't like to provide. I have already restore Flash Drive, and my experience with her judge is not an acceptable alternative.

  Please help me by explaining what I do to facilitate access to the version full? In the past, a copy of the operating system came on a disk with the delivery of the computer?

  Thank you for your help, Bob

  Microsoft was transferred to a delivery of download-only for Windows 10. Your choice is either by calling Lenovo help for support of physical recovery as mebsterbball suggested, or you can download Win 10 media directly from Microsoft and use the integrated in your BIOS license key to install.

  If you want to follow the way of download, you get this link: https://www.microsoft.com/en-us/software-download/windows10

  Edited to add: Microsoft Download you will get the full version without recovery tools, drivers or software provided with the recovery of Lenovo. Looks like you're simply wanting to do a clean install. In this case, you want to go on the road to download.

• Satellite 1620CDS - need Multimedia Audio Driver for Windows 2000 Pro

  I recently had to reinstall my laptop Satellite 1620CDS with Windows 2000 Pro, but I can't locate the multimedia Audio device driver! and as such I have no sound.

  Any advice on how I could find this driver, would be much appreciated...

  Just FYI: your laptop has Crystal 4281 audio card. I hope you find the driver on the page given by the previous user. It is in the list.

• HP Pavilion Slimline s3760in D: need help in Clean install Windows 10 pro 64-bit?

  Hello

  For the past few months I am running windows 10 pro where I had to upgrade windows 8.1 pro 32 - bit windows 10 pro 32-bit. If my system is activated in windows 10 pro and it is authentic.

  

  When I checked in the type of system, it says operating system 32-bit, x 64 processor.  4 GB RAM only 3.12 GB of RAM is usable.

  This means that my processor supports 64-bit operating system. That's why I intend to clean windows install 10 pro and install the 64-bit version so that I can use all 4 GB of RAM.

  That's why went into a tool for creating media and downloaded Mediacreation Toolx64 but when I try to launch the app it shows error "this app cant run on your pc. But Mediacreation tool for 32 bit gently. According to me, given that my current OS is 32-bit so mediacreation toolx64 is not running.

  So I was wondering if I run 32-bit tool mediacreation and choose 'create multimedia installation for another pc' and chosen architecture (32-bit and 64-bit) times, then the clean installation of windows pro 10 OS will I have the option to choose between the version 64-bit and 32-bit version?

  [2] already my windows 10 pro is active in 32-bit version, I get a product key error when I clean install 10 pro for the 64 bit version of windows?

  [3] will be my windows 10 64-bit pro is activated? Since my windows 10 pro turned in a 32-bit version.

  Microsoft memo said "Your PC will activate online automatically as long as the same edition of Windows 10 has been activated successfully on this PC using the free Windows 10 upgrade offer."

  HI Varadar,

  You're right, you choose the installation program of the media creation tool that corresponds to your current system, but create a support for another PC and select 64-bit or both.  I would choose 64-bit.

  Yes, what you plan should work.  Once you have upgraded to Windows 10 32 - bit and Windows checked 10 32 - bit is set, you can use Media Setup to switch to Windows 10 64 - bit.  But... I could ask you to wait a month.  It was reported on the sites a Updatefor Windows 10 is expected in November.  This update will include some changes and corrections that we have already published to our group of insiders test.  The recent blog post is hereand scroll to the bottom of reading on the Activation stuff.  We also wrote about the changes, including the news of your task in our own forum.

  What do you think should work now today, if there is no problem or bug there is no backup.  But if you wait a bit, then the backup as explained will use your Windows 8.1 Pro key into your HP motherboard.

  I hope this helps,

  Charles

• Need product key for downloaded Windows XP Pro x 64 trial

  I downloaded the trial version of Windows XP Pro x 64 recently, but I can't install it without a product key. Where can I buy a product key?

  I guess that Microsoft abandoned this program (if it exist). Bottom line is that you can not get a trial key. I'm sorry.

• Need help, can't activate Windows 8 Pro on HP 3125

  I got a netbook HP 3125 which has an AMD E2 APU, 4 GB ram, 320 HARD and Windows 8 Pro disc and would use for about a month and well. Recently, I decided to update my ram and anything by doing this, I also decided to upgrade to an SSD HARD drive.

  I changed the HARD drive out and installed the SSD, but the BIOS doesn't detect so I disabled the Secure Boot, boot enable Legacy and then proceed to installing a custom installation of Windows 8 Pro using a USB key.

  After installation, it asked me a product key, which I find it weird because Windows 8 does not come with product key labels, since it is built into the bios.

  My problem is, how do I activate my Windows 8 Pro, when it keeps asking me for a product key that I don't have?

  Also, I noticed in the BIOS, it is sometimes called 'Key to load HP factory default', but I can only do this when secure startup is enabled.

  Embedded product key Windows 8 has something to do with the secure boot, for example, if the Secure Boot is disabled, then Windows 8 will not activate?

  Thank you

  Woot! I got it to work!

  Secure boot has nothing to do with the activation of Windows 8 or not with the COA embedded (product key) which is in the bios.

  Here's what I did, just note that this method may not be appropriate measures, but it still works. And different systems configurations, may require different or additional measures. Also, this method may or may not work with all systems.

  for example, the brand or the system you may or may not work with the steps posted in this thread.

  If you have a Windows 8 with a product key that is located on a sticky label, this does not apply to you. It's only for those who have purchased a brand name with Windows 8 system, and it does not come with a sticker product key.

  Components used in this tutorial

  -3125 Netbook HP: AMD E2/6 GB/Intel of the Commission 330 120 GB SSD/F27 bios (later at the time of this tutorial)

  -Microsoft Windows 8 Professional 64-bit (original) disc

  -SATA to USB 3.0 adapter

  -Lite-ON SATA DVD Writer

  1. turn on the system and press F10 to go into the Bios

  2. in the bios, go to trial system > Boot Options

  3. go to Secure Boot and disable it

  4. Select clear all Secure Boot key and enter the 4-digit confirmation code

  5. then go to support HP Factory Default Keys, select it and press Yes

  6. save the Bios and output

  7. Press F10 and return in the Bios

  8. go to the System Configuration > Start Options

  9. select Legacy Support and activate it. A warning message appears, saying that this may cause the operating system to boot, just ignore it and press Yes.

  Now you should see the following text:

  Legacy support = on and key = registered platform

  10 save the Bios and output

  11 insert the disc of Windows 8 for the DVD player and release the boot drive order by pressing F9

  12. the driver, select start from the EFI file and press on enter

  A window opens, showing the HDD/SSD and DVD player with a unique code next to each hardware device

  13. Select EFI sector DVD and press ENTER.

  14. then select , , Bootx64.EFI. After that it will be white and then asked at the start of the DVD.

  15. Press any key to boot from the DVD. If it's done correctly, you will see a HP start-up logo

  16. once the DVD has finished initializing, will appear on the screen of configuration of Windows 8. Click next

  17. accept the EULA and then select custom installation

  18. create a new partition on the disk that you want to install the operating system.

  Note: Windows will create 3 additional partitions, as well as for the installation of the OS. What makes the drive as GPT.

  19 install Windows 8

  20. after the installation and customization of personal settings. Go to control panel > system and you will see

  Windows 8 is activated.

  You can either enable or disable Secure Boot in the bios, as it has no effect on the question of whether or not the operating system will boot. I tried the two enable Secure Boot and disabled, the two parameters allows me the startup of the operating system.

  As Intel 330 SSD, I got two of them and both have no problem running Windows 7 or Windows 8.

  ACHI is necessary if you want to enable TRIM that optimized the SSD automatically when you have to.

  If the TRIM does not work, then it must rely on a Garbage Collection.

  To turn off the SSD on Windows 7, schedule defrag because this will reduce the life expectancy of the SSD

  Windows 8 should because it will recognize if it of a SSD or not. If this is the case, then it will send the TRIM command.

• I need help to connect my windows 7 pro PC to a windows 2008 Server...

   
  Two points of connection here.
  Server: Windows Server 2008
  Client: Windows 7 Pro Edition.
  Client used to connect to the server so that the server was located on the customer network drives. They are connected to the same hub via ethernet and wifi (PC has to a connection wifi and ethernet to same hub).
  Customer will not see the server on network
  Server does not see the Client subnet.

  Try this:

  Navigate to the following location:
  Control Panel\All Control Panel Items\Network and sharing Center\Advanced sharing settings
  
  Select the options as shown in the image above, then click on save changes. Try this in Server computers and client.
  If the problem persists, answer here.

• How to get a Windows Xp Pro recovery disk

  I have a laptop that I bought, it came pre-installed with Windows Xp Pro, how can I get a recovery disk using my product key?

  Start here:

  http://www.lenovoblogs.com/insidethebox/2007/02/making-your-own-recovery-CDs/

• HP Pavilion 23 AiO need USB 3 Driver for Windows 7 Pro 64-bit

  Hello

  I need driver USB for HP Pavilion 23 AiO for Windows 7 64 bit. I tried to install the chipset and USB drivers on the HP driver Web site, but he says that I don't have perfectly meets the requirements for installation?

  Hardware ID

  PCI\VEN_1022 & DEV_7812 & SUBSYS_2AEE103C & REV_03
  PCI\VEN_1022 & DEV_7812 & SUBSYS_2AEE103C
  PCI\VEN_1022 & DEV_7812 & CC_0C0330
  PCI\VEN_1022 & DEV_7812 & CC_0C03

  OK, so I'm done fixing this problem. Because there, anyone having the same problem as me, here is how I did it.

  Assuming that you are trying to install the USB 3 on Windows 7 64 bit drivers...

  1. go here and download the Original Texas Instruments USB controller driver

  2. before executing the downloaded file (sp57875.exe), click on Start/Run then type folder and press ENTER.

  3. run the executable file (sp57875.exe). You will notice the content excerpt in the TEMP directory % opened in a randomly named folder.

  4 copy the entire folder on your desktop and then cancel the rest of the installation.

  5. go into your configuration/system control panel and Device Manager/security

  6. right click on the USB controller in Device Manager and click on Update driver software...

  7. click Browse my computer for driver software

  8 go to the desktop where you put the TEMP folder and select the src directory

  This should do the trick. I had to repeat 6,7,8 for all USB drivers that were not installed correctly. You can get a uknown device show up once you apply the first installation, just repeat steps 7,8,9 on the unknown device and it will install the USB 3.0 hub.

  I hope this helps.

• Satellite L650 - 1 DG (PSK1EE) - need drivers for 64-bit Windows 8 Pro

  Dear all,

  Could someone help me in this? I have upgraded to Windows 8 and I has not find drivers for my laptop from Toshiba Web site.

  My HDMI port does not work.

  Could someone advice me and I will be appreciated.

  Thank you.

  Best regards

  A

  Hello

  EU from Toshiba has published a page of information to win 8:
  http://www.Toshiba.EU/innovation/generic/Windows8-message/

  Pilots win 8 are not released for this series. I could not find in the Toshiba compatibility matrix

  Now, you have two options: either you will return to Win 7 or you will still keep 8 Win installed on your laptop and are looking for the drivers of your own hands.
  You can try Windows 7 drivers for this unit and the other drivers Win 8 out of other models of laptops win 8 supported.

  Many different Win 7 drivers are compatible with Win 8

• Tecra R950-159 - Windows 8 Pro recovery is very slow

  Hello

  I just unpacked my R950-159 and inserted the DVD Pro Windows8.
  He wiped the drive and showed a screen "copying files".

  After inserting the DVD2 continues the process of copying.
  Recovery (settings?) seems to take ages.
  After 1,5 hour +, there is always the Red Toshiba Leading Innovastion screen.

  No one knows how long this recovery is supposed to take?
  2 hours, 3 hours? (The HD light still flashes every now and then).

  Thanks in advance for reply.

  BART.

  Hello

  Just to clarify this:
  Your laptop has been delivered and pre-installed with Win 7
  The Win 8 Pro 64 bit DVD was in the package
  Now, you want to install Win 8 and replace you the Windows 7.
  Is this correct?

  So as far as I know to install Win 8, you will need to go to the BIOS and must choose UEFI BIOS and must allow secure boot.
  By the way: before installing the 8 to win, you must create a recovery disc that contains the preinstalled Windows 7!
  Still is it that this drive is necessary if you want to revert to Windows 7!

• Query related to the availability of WINDOWS 8 PRO DVD

  Original title: WINDOWS 8 PRO DVD

  When will I receive my backup DVD Pro Windows 8? It's been more than 2 weeks? Says their e-mail received October 31, 2012: your DVD is on its way Your Windows 8 Pro has been shipped. It should arrive in 4 to 8 days.

  Hello Sniper91,

  Welcome to the Microsoft community where you can find all the answers related to windows.

  According to the description, it seems that you have problems with Windows 8 Pro DVD. As I understand it, you need to know when the Windows 8 Pro DVD will be available.

  Please contact sales and Support of Microsoft Store.

  http://www.microsoftstore.com/store/msstore/HTML/pbPage.Help_Site_Contact_Us

  Meet us if you face any problem of Windows, and I'd be happy to help you.

  Good day!

  Hope this information helps.

• Windows 2000 pro OS disc

  NEED WINDOWS 2000 PRO RECOVERY DISK. SE MESSAGE SAYING (BOOT FROM ATAPI CD-ROM: FAILURE...)   DISK BOOT FAILURE, INSERT SYSTEM DISK PRESS ENTER.

  Hello

  Thank you for visiting the website of Microsoft Windows Vista Community. The question you have posted is related to Windows 2000 and would be better suited to the TechNet community. Please visit the link below to find a community that will provide the support you want.
  http://social.technet.Microsoft.com/forums/en-us/categories

  That being said, it seems that there is a problem with the machines boot devices.  My best advice would be to get into the BIOS and make sure that your boot drive is first in line for the startup process.

  PLEASE NOTE:

  BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can resolved e. Changes to settings are at your own risk.

  Best regards

  Matthew_Ha

• Try to update the old laptop running Windows XP Pro, SP3 won't install

  Updating an old laptop, Windows xp pro, is needs service pk 3 update, it will not update from the center of update of microsoft? Any suggestions?  It says SP3 failed to install?

  Please answer each of the following diagnostic questions in a numbered list in your very next answer (no need to quote this post):

  1. What is the full name of your application or antivirus security suite installed and when (date about) is your subscription current expires?  What (other than Defender) anti-spyware applications are installed?  What third-party firewall (if applicable)?

  2 a Norton or McAfee application ALREADY installed on this computer?

  3. do you have a free trial Norton or a test of free McAfee [CHOOSE ONE ANSWER] come preinstalled on the computer when you bought it? (No matter if you have never used or activated).

  4A. is this the same computer as in this other recent thread of yours? -Online http://answers.microsoft.com/en-us/windows/forum/windows_xp-performance/windows-xp-add-remove-programs-opens-but-program/8863c77f-f0a7-4e44-90e4-ddac240a2e29

  4B. and this one? -Online http://answers.microsoft.com/en-us/windows/forum/windows_xp-system/how-to-obtain-a-windows-xp-pro-recovery-disk/f48e49a3-69df-4c47-98d3-f98b9db7184f