need tutorial to install new ram and memory

After buying a tuner HD to replace my tuner in media center pc, I have read that the only way I can get HD is with a blu ray Disc... is that true?  and as I'm in the box it is expedient to increase the memory so I bought 2 gigabytes of ram and 4 t of memory to install.  so far, it seems to me after reading that interim so my question is, where can I have find a tutorial that I can read before I go in and destroy my computer instead of my usual Act and then read...

Hello

Please go to your decision makers it, section site help, look for Tech or maintenance

manuals.

Tags: Windows

Similar Questions

  • HP 110-243wb desktop PC: can I upgrade the ram and memory of my HP 110-243wb desktop PC?

    Can I upgrade the ram and memory of this HP 110-243wb desktop PC? What suggest you and you thank in advance.

    What did you find?  Was it a 8 GB module?  Two modules of 8 GB is the MAXIMUM.

    Yes, this is why I suggested the part numbers.  You have to match pairs.

  • My Pro9000... Cannot get black ink to print in black. installed new catrdidge and made 3 deep cleanings.

    I have a Pro9000 Mark II... I can't black printing black ink - it comes out grey. I installed new catrdidge and made 3 'deep cleaning' and test pages see the normal... any ideas?

    "I work a LOT with this printer to work.

    How is "MUCH?  There may be a defective print head.  Things wear out, but if that's the case yo u can replace.

    But I'd rather see buy you a new Pro-100.  The cost would be close, if you find one on sale and you would have a more updated printer to date.

  • Installed new ram, but more noise beep on log-in

    Hi all

    I asked a question about two hours ago on what type of ram to install it on my laptop:

    How to find tension to new ram memory

    After he replied (thanks, Ogelthorpe!) I crossed the street to buy. I bought, installed and turned on my laptop but unfortunately when I first started all I got beep three times then pause for three seconds constantly repeated that.

    3 beeps of death MacBook Pro - YouTube

    I had to open the back, remove the battery and reinstall the ram. I found it to be a tight fit and that he had not slipped on. When I restarted it again, I had no problem. I wanted to check if this is the case whenever I turned off the laptop and he did it again and it was. However, when I simply restart the laptop, there is no that. My laptop is to save memory as being installed. I tried to reverse each ram slots and I had the same problems. I did not a ram at a time, but that's my next step. I cleaned inside the laptop and my laptop for recording the ram every time after that I have remove the battery and try again.

    I must return the ram, if no problem since I'm able to. It's the ram, I've had because it was what they had worked on my laptop:

    http://www.Corsair.com/en/Corsair-Mac-memory-16GB-dual-channel-DDR3-SODIMM-MEMOR y-kit-cmsa16gx3m2a1333c9

    Anyone have an idea how I can fix this from happening?

    Thank you!

    What is the EXACT model/year of your MBP?

    Run an Apple hardware Test:

    https://support.Apple.com/en-us/HT201257

    Note that an error free AHT is not final.

    Ciao.

  • Need help for upgrade of RAM and hard drive for HP Pavilion dv6-2130ej

    Hello.

    I have the HP Pavilion dv6-2130ej with windows 7 Home Prem OA system.

    1. I would like to improve my RAM from 4 GB to 8 GB memory.
    2. I would like to add another hard drive instead of CD space.

    Can you tell me please, what I need to change the card of 4 GB to 8 GB card or is there another place to add a 4 GB card more?

    In any case, I would like to get a memory card description that corresponds to my computer so I do not buy the wrong memory card. Characteristics of the witch, I do?

    Is it possible to add another hard drive to the computer instead of the Conference on disarmament and please tell me what parts do I need to buy and what is the maximum. Storage hard drive which may include my computer? There now 4RAM internal memory and 500 GB hard drive.

    I would like to make my PC as strong as possible because I use it for work with heavy programs editing and I need a lot of internal memory.

    Thank you for your help,
    Waiting for a response,
    You can contact me by email too
    [Personal information]

    Vira.

    Hello.

    I think you can install the drive and use your recovery disk to reinstall Windows.

    You can change the hard drive of your computer with a WD one Pavilion, just keep in mind that you need a 2.5 inch drive. In addition, if your Pavilion model is dv6500 or more, it has a SATA-II interface, but you can always take a drive SATA-III and it will not work (although will run at the lower speed of SATA-II).

    Here, you want to take a look at all our 2.5-inch drives:

    http://products.wdc.com/support/kb.ashx?ID=HzdPVS

    Hope this helps and let me know if you have any additional questions.

    See you soon!

  • A1103 new Ram and HARD drive will not start

    Hello.

    I have a Mac mini A1103. When I got there the folder flashing with question mark. I got a macbook earlier where this problem was solved by installing a new hard drive. so I ordered a new 160 GB IDE 2.5 "5400 RPM and 1 GB Corsair Valueselect DDR1 333 MHz hoping that this will help me get the mini running and preforming a little better with 512 MB of Ram.

    When I boot the mini after swapping ram and hard drive I always see the same flashing folder. I can reset the NVRAM Boot, enter diskmode target? (I think) and the Boot Manager.

    When I enter the Boot Manager I can see the following screen

    a few times I get to this screen for Open Firmware screen where I can use certain commands such as vram-reset reset-all rebot and so, but sometimes I'm just stuck on this screen.

    Anyone have any suggestions on what is wrong and what I can try next? I do not have the boot original dvd but I have a usb bootable with IOS 10.6 and a dvd with IOS 10.6 (not original) but I can't get botting from any of the devices.

    A Mac Mini A1103 has a G4 Power PC processor and cannot be greater than 10.5.8. Superior OSX versions require an Intel processor.

    In this statement "a usb bootable with IOS 10.6 and a dvd with IOS 10.6 (not original)" I think you mean OSX, not of iOS. You must obtain a copy of the original installation disc which was 10.3 or 10.4 or disk to upgrade to 10.4 or 10.5 full retail. Coverall A1103 all three 2005 models of the Mac Mini G4.

    You cannot use a grey disc unless it was delivered with your specific Mac.  Native gray disc with Macs and can not e used on the other model of disc.

    You can probably call Apple and order a copy of the original disks

  • Can I reactivate a version of OEM Windows 7 after installing new mobo and cpu. If it isn't then why?

    My processor and motherboard in my computer are broken. I need to install new hardware, but I have an OEM of Windows 7 Home Premium version. Is there a way I can install the new hardware and start without any problem the reactivation of Windows 7?

    Non - OEM license is locked to the original motherboardm and may not be transferred, except when the change is made in conditions of warranty.

    You will need to purchase a new license for Windows.

  • dv6547tx new RAM and HARD drive

    My dv6547tx has its origin HARD drive and 2 GB of RAM installed.  I want to upgrade the RAM to 4 GB and HARD about 300 GB 7200 RPM drive.

    Can you please specify?

    Hello

    haggis1 wrote:

    My dv6547tx has its origin HARD drive and 2 GB of RAM installed.  I want to upgrade the RAM to 4 GB and HARD about 300 GB 7200 RPM drive.

    Can you please specify?

    If you install Windows Vista or Windows 7 , then 2-4 GB is supported. Only 2 GB is supported for the Windows XP operating system.

    Install only guaranteed compatible memory of a major memory manufacturer as Crucial, Corsairor OCZ. I've linked to some upgrade memory replacement sites.  If you want your upgrade to go smoothly, don't buy non-guaranteed compatible memory.  Not a brand name memory is not a good option if you want your computer to start correctly. Just replace the modules of memory in pairs. Wil you have to remove your original memory strips to install the upgrade of sticks.

    Replacing hard drives: Wester Digital Scorpio or Fujitsu 2.5 "SATA hard drives are highly recommended.

    500 GB is about the max I've read of anyone using a replacement hard drive for your laptop series.

    Then... 300 GB is not a problem.

    Replacing the hard drive follow these are here.

    Happy editing,

    ERICO

  • HP Pavilion Notebook 15-199sa: can I install more RAM and an SSD at the same time?

    Hello

    I have a HP Pavilion Notebook 15-p199sa I would like to be updated by installing an additional 8 GB of RAM and an SSD.

    I could do both at the same time, or it would be more advisable to do one at a time?

    Usually, I'd do one at a time, but take it apart the laptop and remove the motherboard are quite a job! I have a Ph D in breaking things and I know that if I take the laptop part twice then nothing good will come of it.

    I was considering also put the current HARD disk in the optical drive, but somewhere in the 20 pages of comments to this thread deals UK it is written the header on the motherboard for the DVD player is only SATA I - someone has a I experience to put a HDD in SATA optical drive? (or did someone knows if the header is really SATA I - the manual does not say).

    Otherwise, I could put the existing 1.5 TB of HARD drive in an external enclosure and connect it to a USB 3.0 port. The manual says to connect external drives to these ports is OK but it does not have all the features - would it be a good idea to use a powered USB 3.0 hub or a powered external case? (rather than using the bus power).

    Uh, that's all for now, I think

    John latter

    Hello

    Nothing prevents you to do both at the same time. I have half a dozen old records HARD in USB 3.0, USB 2.0 external enclosures and they work fine. They work on all of my laptops and more comfort than those who have power supplies (much smaller than now).

    Kind regards.

  • Need direction for the upgrade RAM and graphics card in my all-in-one Center B320 Office idea.

    Hello

    I want to level of Ram and graphics card I have my all in one ideacenter B320 Office.

    current specification of my office:

    CPU - 2nd gen cor i3 (3.10 ghz)

    RAM - 3 GB

    Graphics - 1 GB (AMD)

    can I put at 1.5 GB or 6 GB and 2 GB graphics card ram level.

    orientation need help pls...

    Thanks to adwance...

    Hi Mahendranaik63

    Welcome to the Community Forums of Lenovo!

    I guess these B320 data can help you with updates.

    Data sheet B320of Lenovo. (The information you are looking for 'KEY FEATURES' statement).

    Also check this personal reference guide under Lenovo B320 page.

    I hope this helps.
    See you soon!

  • Installing new RAM in MacBook Pro 2012?

    Hello

    I don't want to install more RAM in my MacBook Pro 2012. I lose all information in the process of installation (hard disk for example, etc.)?

    Thank you.

    Cauchy wrote:

    I don't want to install more RAM in my MacBook Pro 2012. I lose all information in the process of installation (hard disk for example, etc.)?

    N ° you shouldn't lose all information on the hard drive.

    Make sure that the Mac is saved completely before trying to upgrade the RAM.

  • I put in my pavilion dv7-4170us recently new Ram and it works fine! What is the 4 in zone x3in?

    During the installation of the new RAM, I noticed an empty compartment on 4inches x 3inchs about a half inch deep with four mounting sealants, where is this for?

    I think that it's a secondary hard drive Bay...

  • Weird Audio problem since installing new SSD and reinstall the OS and the upgrade of Ram

    I have a really strange problem in first (well the same thing happens with native files outside the first he too!)

    Some of my corrupted .wav and .wma audio files. At first I thought it was a buggy project file.

    Then I checked some other files of the projects waiting to be done and they were the same time of a heart attack.

    So I copied the apparent bad file to my laptop and it plays very well!

    Then when I check some audio files of the projects finished on my PC they sound corrupt too! And of course, they were very nice when I actually finished projects.

    I have tried in the first CC2014 and CS5, but it is not the program that I know now.

    I googled "Audio codecs Windows7" but all the options appear to be malware, someone has any ideas? Y at - it a codec pack that I could try?

    I am running Win 7 Pro

    I7 960 @ 3.2

    24 GB ram

    NVIDIA GTX 480

    Thank you

    Ronan

    Had this sort.

  • Since installing new RAM, I now have a BSOD.

    I'm currently under Win 7 64 bit. I moved from 8 GB of ram, 16 GB, and after installing the new memory modules live, every now and then my system crashes with the BSOD. Here's the dmp file...
    http://www.wenatcheekennelclub.com/022713-33384-01.dmp
    Any ideas on what is the cause? Bad RAM? Conflict?

    These accidents were caused by the corruption of memory usually a driver, but since you updated your RAM at two different times, I ran two tests below.  First run Memtest and if that comes back clean run driver verifier.

    * Don't forget to download any other DMP files (especially those running auditor)

    * If you are overclocking reset all default before running these tests.
    In other words STOP!   If you don't know what it means that you're probably not

    1 - Memtest.
    * Download a copy of Memtest86 and burn the ISO to a CD using Iso Recorder or another ISO burning program. http://www.memtest.org
    * Boot from the CD and let it run at least 5 or 6 passes.
    * Don't forget, anytime Memtest reports errors, it can be bad RAM or a bad motherboard slot.
    * Test the sticks individually and if you find a good, test it in all slots.

    Any error is indicative of a memory problem.
    If a well-known stick fails in a slot of motherboard, it's probably the slot.


    2. Driver Verifier

    Using Driver Verifier is a dubious proposition. Most of the time it will crash and it will tell you what is the driver.

    * But sometimes it will crash and will not tell you the driver.
    * At other times it will crash until you can connect to Windows. If you can't mode without failure, then you will have to resort to editing the registry offline to disable driver verifier.
    * I would suggest that you first back up your data and make sure that you have access to another computer so you can contact us in case of problems.
    * Then do a system restore point (so you can restore the system using the functionality of Vista/Win7 Startup Repair).

    * Under Windows 7, you can do a startup repair disk by clicking Start... All programs... Maintenance... Create a system - with Windows Vista repair disc, you need to use your drive installation or from the "Repair your computer" option at the top of the Safe Mode menu.

    Here is the procedure:

    -Go to start and type "auditor" (without the quotes) and press enter
    -Select 'Create a custom settings (for code developers)' and click 'Next '.
    -Select "Select individual settings from the list complete" and click "Next".
    -Select the entire document except for "Low resource Simulation" and click "next".
    -Select "Select driver names from a list", then click "next".
    * Select all drivers that are NOT supplied by Microsoft and click on "Next".
    -On the next page, select "Finish".
    * Restart the system and wait as he crashed to blue screen.
    * Continue to use your system normally and if you know what are the causes of the crash, do it several times. The objective here is to get the system crash because Driver Verifier is stressing out the drivers. If it is not planted for you, then let it run for at least 36 hours of continuous operation.
    * If you are unable to Windows because it crashes too early, try safe mode.
    * If you can't mode without fail, try to use the system from the installation DVD restore to bring the system back to the previous point of restoration that you created.

    * Further reading
    http://support.Microsoft.com/kb/244617

  • Hard drive failure. Need to re install CS6 suite and Lightroom 4. Help!

    A month ago, my Mac Book Pro crashed. It turns out that I had to replace my hard drive, but I could not turn off my suite CS6 or my 4 of Lightroom. Is it possible to re install my Lightroom 4 and CS6 on the same Mac Book Pro, which has a new hard drive?

    Also I don't have the old hard drive. Apple didn't make him to me.

    Yes.

    If you need to reset your activation meter, even ask adobe support, https://helpx.adobe.com/contact.html

    If you need the installation file (s)

    Downloads available:

    Download and installation help links Adobe

    Help download and installation to Prodesigntools links can be found on the most linked pages.  They are essential; especially steps 1, 2 and 3.  If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".

Maybe you are looking for