Need urgent help with the startup of the database
Hi allI use oracle 10g on 32 bits of windower server.
I try to start my database today and it gives me error, and that's my production database.
I need very urgent help you. (I have no rman backup, and data are not n6cessoires so, since it is the practice of the student).
SQL> startup open
ORACLE instance started.
Total System Global Area 524288000 bytes
Fixed Size 790180 bytes
Variable Size 250343772 bytes
Database Buffers 272629760 bytes
Redo Buffers 524288 bytes
Database mounted.
ORA-01110: data file 34: 'G:\ORACLE\DATAFILES_ACADEMY\ACADEMY'
ORA-01115: IO error reading block from file 34 (block # 1)
ORA-27070: async read/write failed
OSD-04016: Error queuing an asynchronous I/O request.
O/S-Error: (OS 23) Data error (cyclic redundancy check).
Kind regards.
Maahjoor wrote:
Hi dear,I need further assistance on your side, I restarted the server, but the same problem.
as there is a way to drop and re-create a system tablespace? given that the 34 file belong to the tablesapce system.concerning
N °
So just create a new database. Who will have every ten minutes. And to say that your students to create new storage spaces. Who will be the two minutes.
Tags: Database
Similar Questions
-
Need Urgent help on the problem of Autocad application on a virtual desktop performance
Hi all
I was faced with a delicate issue with the VDI implementation that was carried out a few months back.
The client uses a few applications Auto CAD on HP thin clients and portable computers.
They have questions only on thin clients HP and all works fine when using the dedicated portable computers.
When accessing files Autocad a few kilobytes, they are able to function properly on thin clients because there is no lag when they zoom, zoom.
But when they access the files that are a few megabytes ~ 5MB, they have problems with cursor jumping, clicks delayed and problems with zoom in zoom out.
Kindly throw light upon the question above that we are unable to crack down between implemented VDI and HP thin clients.
Thank you very much for your answers.
Kind regards
RGSDear Taj,
Thank you for your response.
Customer light HP T520 is the model.
I'll try this recommending, how ever can you help me solve this problem? -
Need your help with the problem of SWF file swapping
Hello
I have two SWF Flash files I want to download in the same HTML file. But I would like to load only one at the time and would like to have a button on each Flash SWF file that causes the other SWF to load.
Hmmm... I don't know if I managed to make sense. (: o) I would like to try it once more. (: o) I would like to exchange a SWF file to another SWF file by clicking on the buttons that are placed on the SWF files! : o).
I was wondering if it is possible, or should I think of another way to work around this problem of mine.
Thank you very much for your help and have a great day.
See you soon,.
BabakKhoramdin wrote:
> Hello,
>
> I have two SWF Flash files I want to download in the same
> HTML file. But I would like to load only one at a time and would
> like to have a button on each Flash SWF file that causes the other SWF to be
> load.
>
> hmmm... I don't know if I managed to make sense. (: o) I would try one more
> times. (: o) I would like to exchange a SWF file to another SWF file by clicking
> on the buttons that are placed on the SWF files! : o).make a swf as a holder. call the main.fla file main.swf.
Embed this file in your html document. This button in place of the file with the
the following measures:on (release) {}
loadMovieNum ("second.swf", 1);
}in this file have a button with the action to load the 3rd file:
on (release) {}
loadMovieNum ("3rd.swf", 1);
}by charging them at the same level (1), they replace each other.
Pretty simple... uh?--
ConcerningUrami
--
Happy new year guys - all the best there is in the 2006 :)
-
Need urgent help with QLE220 HBA
Hi all.
I have 3 servers Dell R810 with QLE220 HBA.
The problem with the HBAs, is that the ESXi 5.1 cannot recognize them.
The first thing you are going to answer is that these HBAs is not officially on the HCL, and I am aware of that.However, my servers are only 2 years old and I'm guessing I'm not the only one with the problem.
Dell said they officially support ESXi 5.1 on this type of server, and Yes, in my installation I used the custom dell CD/DVD.
However there is no drivers for these HBAs on CD/DVD.
I looked everywhere in the forii and discussion groups all over the Internets, and so far I've found moderately useful links:
http://communities.VMware.com/thread/328090
http://communities.VMware.com/thread/168414
and this is where I downloaded the driver for ESi Qlogic 5.x package:
I installed it using the update and installed Manager allright, however there was no mention of the driver for my HBA.
I then browsed the Internets for a different solution. And found the following solution:
that applies to ESXi 5.0 and even if it seems like a hack, not sense.
However in the process seems to have hit an obstacle in that, when you try to run the
tar - xvf scsi - qla.tgz (i.e. scsi_qla.v00)
I get one:
tar: tar invalid magic
error message.
I feel that the solution lies somewhere in this direction, but I'm baffled by this error.
I understand that VMware may have implemented an option in 5.1 to prevent manipulation or rooting, however, I must point out that the driver signing
I am really desperate about this.
Please don't tell me to go sort it out with Dell or the guy who sold you the servers.
Thanks in advance.
Oh yes, I did the same mistake as someone in the other thread. Try to run this at the re-creation of the tarball:
CD/tmp/QIP
tar cf - scsi_qla.tar *.
vmtar - c scsi_qla.tar-o scsi_qla
The original ". / *"should be responsible for this issue.
List of files in the archive should now look like this:
# cat scsi_qla.tar | art tv
drwxr-xr-x root/root 0 2013-01-11 16:31:13 etc.
drwxr-xr-x root/root 0 2013-01-11 16:31:13 etc. / vmware /.
drwxr-xr-x root/root 0 2013-01-11 16:31:13 etc/vmware/driver.map.d/
-rw - r - r - root/root 592 2013-01-11 16:31:53 etc/vmware/driver.map.d/qla2xxx.map
drwxr-xr-x root/root 0 2013-01-11 16:31:13 usr /.
drwxr-xr-x root/root 0 2013-01-11 16:31:13 usr/lib /.
drwxr-xr-x root/root 0 2013-01-11 16:31:13 usr/lib/vmware /.
drwxr-xr-x root/root 0 2013-01-11 16:31:13 usr/lib/vmware/vmkmod /.
-rw - r - r - root/root 1644648 2012-02-08 06:54:21 / usr/lib/vmware/vmkmod/qla2xxx
drwxr-xr-x root/root 0 2013-01-11 16:31:13 usr/share.
drwxr-xr-x root/root 0 2013-01-11 16:31:13 usr/share/hwdata /.
drwxr-xr-x root/root 0 2013-01-11 16:31:13 usr/share/hwdata/driver.pciids.d/
-rw - r - r - root/root 740 2012-02-08 06:54:21 usr/share/hwdata/driver.pciids.d/qla2xxx.idsThey looked like this with the previous point and forward slash:
# cat scsi_qla.tar | art tv
drwxr-xr-x root/root 0 2013-01-11 16:31:13. file/etc /.
drwxr-xr-x root/root 0 2013-01-11 16:31:13 ./etc/vmware/
drwxr-xr-x root/root 0 2013 - 01 - 11 16:31:13./etc/vmware/driver.map.d/
-rw - r - r - root/root 592 2013-01-11 16:31:53./etc/vmware/driver.map.d/qla2xxx.map
drwxr-xr-x root/root 0 2013-01-11 16:31:13. / usr
drwxr-xr-x root/root 0 2013-01-11 16:31:13 ./usr/lib/
drwxr-xr-x root/root 0 2013-01-11 16:31:13 ./usr/lib/vmware/
drwxr-xr-x root/root 0 2013-01-11 16:31:13 ./usr/lib/vmware/vmkmod/
-rw - r - r - root/root 1644648 2012-02-08 06:54:21 ./usr/lib/vmware/vmkmod/qla2xxx
drwxr-xr-x root/root 0 2013-01-11 16:31:13 ./usr/share/
drwxr-xr-x root/root 0 2013-01-11 16:31:13 ./usr/share/hwdata/
drwxr-xr-x root/root 0 2013 - 01 - 11 16:31:13./usr/share/hwdata/driver.pciids.d/
-rw - r - r - root/root 740 2012-02-08 06:54:21./usr/share/hwdata/driver.pciids.d/qla2xxx.ids -
Hi, this is the 8th time, I have the blue screem of death and I am unable to find specific solutions for my case is the following:
Signature of the problem
Problem event name: BlueScreen
The system version: 6.0.6002.2.2.0.768.3
Locale ID: 2057Files helping to describe the problem (some files may be is no longer available)
Mini041511 - 05.dmp
SysData. XML
Version.txtSee a temporary copy of these files
WARNING: If a virus or other security threat caused the problem, open a copy of file can harm your computer.Additional information about the problem
BCCode: 24
BCP1: 00000000001904AA
BCP2: FFFFFA600AE74D58
BCP3: FFFFFA600AE74730
BCP4: FFFFF800028F0EDD
OS version: 6_0_6002
Service Pack: 2_0
Product: 768_1I would be really grateful to those that could help because my final exams are around the corner and I do most of my studies online...
Hi axmankay,
Method 1: you can see the steps in the link below by Diana d.
http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-system/BCCode-24/adfa4cc3-CF61-4797-a7de-1f15323b3f01Method 2: See the steps mentioned in the link below
Pick up the pieces after a computer crash
http://Windows.Microsoft.com/en-us/Windows-Vista/picking-up-the-pieces-after-a-computer-crash -
Need your help with the following 3 error messages that now appear on my PDF document.
Hi all
I worked on a PDF document to the University for the past 4 months. Its a PDF which I was informed as I go along and recording with no problems.
Today however I try to open it to work and that's what I get now...
"This document enabled features extended in Adobe Reader." The document has been changed since its creation and use of the extended functionality is no longer available. For the original version of this document, contact the author'
"There is an error on this page. Acrobat may not display the page correctly. Please contact the person who created the PDF document to correct the problem.
«The font 'GTAJBY + Bliss-Regular' contains a bad /BBbox.»
It has never done this before, and even when I tried to open my backup file it did the same.
Can someone help me please? I have so much work that is potentially lost on this...
(Also, I'm not a large part of the head of the computer, so please keep in simple terms)
Thanks in advance everyone...
Great thanks for your help...
Some "experts".
-
Hey everyone, I need urgent help with a vfx shot. Please everyone!
http://www.YouTube.com/watch?v=JReojFkK53M & feature = channel_video_title
At the same time marker 02:19. It is a kind of coup. I need to know how to do the fly back victim like in this video. I understand how to make motion blur and light noise with sparks. But how it animates this body of return flight?
This kind of thing is much easier to do if you have a clean plate to start. What this means, is that you shoot the guy offering the shot without that person in the scene, then pushes the guy kicked in a similar place to the same angle of the Sun and the same angle and distance front he camera so that it is easy to cut. A portable green screen can be useful here.
Now just cut your kicked out and do a little roto for the kicker so her foot can be in front of the kicked and animate away. Not difficult in practice, but without a good production planning and a little common sense the sequences of shooting a hard sell effect. I did not buy one in the clip as plausible sample. It's cute, but no plausible due to several problems that I will not go into right now. If I'm the ranking the effects as a composition of university level project, I'd give it a C.
-
need urgent help with AIR - LAP - 1242 G-E-K9
Hi all
IM new in the Cisco wireless. I have a Cisco AIR-LAP1242G-E-K9... I don't WLC, I want to use it as standalone AP for wireless access to my users... I took the AP console & got the following msgs!
AP68ef.bde3.3ad4 #.
AP68ef.bde3.3ad4 #.
AP68ef.bde3.3ad4 #.
AP68ef.bde3.3ad4 #.
AP68ef.bde3.3ad4 #.
* 00:18:55.021 Mar 1: % CAPWAP-5-DHCP_RENEW: could not find WLC by using DHCP IP. Renew DHCP IP.
Not in a bound State.
* 00:19:05.651 Mar 1: % ADDRESS_ASSIGN-6-DHCP: Interface FastEthernet0 assigned address DHCP 172.10.10.16, mask 255.255.255.0, hostname AP68ef.bde3.3ad4* 00:19:10.524 Mar 1: % 3-CAPWAP-ERRORLOG: white event 29 & combination State 4.
* 00:19:10.524 Mar 1: % 3-CAPWAP-ERRORLOG: SM Manager: failed to process the message of the timer.
* 00:19:10.524 Mar 1: % CAPWAP-3-Journal of ERRORS: do not handle the message from the timer.
* 00:19:10.525 Mar 1: % CAPWAP-3-Journal of ERROR: failed to process the message of the timer.
* 00:19:10.525 Mar 1: % 3-CAPWAP-ERRORLOG: Discovery interval timer Manager time-out failure.
* 00:19:10.587 Mar 1: % CAPWAP-5-CHANGED: CAPWAP changed state of DISCOVERY
* 1 Mar 00:19:10.587: bsnInitRcbSlot: slot 1 has NO radio
* 00:19:10.595 Mar 1: % LINK-5-CHANGED: Interface Dot11Radio0, changed state down administratively
* 00:19:10.608 Mar 1: % LINK-3-UPDOWN: Interface Dot11Radio0, changed State to
* 00:19:10.609 Mar 1: % LINK-5-CHANGED: Interface Dot11Radio0, changed State to reset
Translate "CISCO-CAPWAP-CONTROLLER"... the domain server (255.255.255.255)
* 00:19:12.606 Mar 1: % 3-CAPWAP-ERRORLOG: did not get the server DHCP server log settings.Translate "CISCO-LWAPP-CONTROLLER"... the domain server (255.255.255.255)
* 00:19:21.607 Mar 1: % 3-CAPWAP-ERRORLOG: could not resolve CISCO-CAPWAP-CONTROLLER* 00:19:30.608 Mar 1: % 3-CAPWAP-ERRORLOG: could not resolve CISCO-LWAPP-CONTROLLER
* 00:20:20.614 Mar 1: % CAPWAP-5-DHCP_RENEW: could not find WLC by using DHCP IP. Renew DHCP IP.
Not in a bound State.
* 00:20:31.244 Mar 1: % ADDRESS_ASSIGN-6-DHCP: Interface FastEthernet0 assigned address DHCP 172.10.10.17, mask 255.255.255.0, hostname AP68ef.bde3.3ad4* 00:20:36.117 Mar 1: % 3-CAPWAP-ERRORLOG: white event 29 & combination State 4.
* 00:20:36.117 Mar 1: % 3-CAPWAP-ERRORLOG: SM Manager: failed to process the message of the timer.
* 00:20:36.118 Mar 1: % CAPWAP-3-Journal of ERRORS: do not handle the message from the timer.
* 00:20:36.118 Mar 1: % CAPWAP-3-Journal of ERROR: failed to process the message of the timer.
* 00:20:36.118 Mar 1: % 3-CAPWAP-ERRORLOG: Discovery interval timer Manager time-out failure.
* 00:20:36.183 Mar 1: % CAPWAP-5-CHANGED: CAPWAP changed state of DISCOVERY
* 1 Mar 00:20:36.183: bsnInitRcbSlot: slot 1 has NO radio
* 00:20:36.190 Mar 1: % LINK-5-CHANGED: Interface Dot11Radio0, changed state down administratively
* 00:20:36.203 Mar 1: % LINK-3-UPDOWN: Interface Dot11Radio0, changed State to
* 00:20:36.204 Mar 1: % LINK-5-CHANGED: Interface Dot11Radio0, changed State to reset
Translate "CISCO-CAPWAP-CONTROLLER"... the domain server (255.255.255.255)
* 00:20:38.202 Mar 1: % 3-CAPWAP-ERRORLOG: did not get the server DHCP server log settings.
AP68ef.bde3.3ad4 #.
AP68ef.bde3.3ad4 #.Due to frequent changes in intellectual property, I can't make the console AP...
Can any body tell me what is the problem & solution... & it will be appreciated if any body share the basic configuration guide
Thanks in advance &
Please answer as soon as POSSIBLE...i want to use it as standalone AP for wireless Access to my users
Me bad. Let me explain. You need a PA running an IOS (aka autonomous) autonomous.
*Mar 1 00:18:55.021: %CAPWAP-5-DHCP_RENEW: Could not discover WLC using DHCP IP. Renewing DHCP IP.
-
I do css of the page property and type a sample text and covert in < a > tag as css < a > tag should come in green color bt it shows in the color purple and I have no why Please think as soon as possible for my Institute.
Thanks in advance
link is attached, please also check the csshttp://practice.zymichost.com/
I'll admit I don't think I understand your question, but if you look at all the colors: the rules, you forgot the # on their part.
Color rules should be
color: #ffc600;
Not
color: ffc600;
See if that helps you.
Gary
-
Need Urgent help with trigger in Oracle 10 g
Hello Dr.
I'm working on my DBMS project in VB 6.0, which is toll management system
I have to insert a trigger for my project, so I decided to insert the trigger at that time.
I have total 3 table UserLogin, vehicle and Vehicle_Data
3rd vehicle data table contains the following fields
Vehicle_Type, Vehicle_No, Tax_Time, Source, Destination and taxes
Now, I did coding for the tax when you select the vehicle Type, Source and Destination tax will automatically be fillup and all data will be stored in the Oracle table but now my problem is I want to create the trigger for Tax_Time column when new data inserted at the present time will be stored in this column
I create one, but it gives an error
create times to trigger after insert on vehicle_Data
for each line
Start
insert into Vehicle_Data (Tax_Time) values (to_char (sysdate, 'HH:MI:SSAM DD_MON_YYYY'));
end;
*/*
Note: I use VB 6.0 and Oracle 10 g Express EditionAssuming that tax_time is a DATE data type, then
create trigger tax_time_trg before insert on vehicle_Data for each row begin :new.Tax_Time := sysdate; end;
should work.
-
Need urgent help in the configuration of the Client VPN IPSec Site with crossed on Cisco ASA5510 - 8.2 (1).
Here is the presentation:
There are two leased lines for Internet access - a route 1.1.1.1 and 2.2.2.2, the latter being the default Standard, old East for backup.
I was able to configure the Client VPN IPSec Site
(1) with access to the outside so that the internal network (172.16.0.0/24) behind the asa
(2) with Split tunnel with simultaneous assess internal LAN and Internet on the outside.
But I was not able to make the tradiotional model Hairpinng to work in this scenario.
I followed every possible suggestions made on this subject in many topics of Discussion but still no luck. Can someone help me here please?
Here is the race-Conf with Normal Client to Site IPSec VPN configured with no access boarding:
LIMITATION: Cannot boot into any other image ios for unavoidable reasons, must use 8.2 (1)
race-conf - Site VPN Customer normal work without internet access/split tunnel
:
ASA Version 8.2 (1)
!
ciscoasa hostname
domain cisco.campus.com
enable the encrypted password xxxxxxxxxxxxxx
XXXXXXXXXXXXXX encrypted passwd
names of
!
interface GigabitEthernet0/0
nameif outside internet1
security-level 0
IP 1.1.1.1 255.255.255.240
!
interface GigabitEthernet0/1
nameif outside internet2
security-level 0
IP address 2.2.2.2 255.255.255.224
!
interface GigabitEthernet0/2
nameif dmz interface
security-level 0
IP 10.0.1.1 255.255.255.0
!
interface GigabitEthernet0/3
nameif campus-lan
security-level 0
IP 172.16.0.1 255.255.0.0
!
interface Management0/0
nameif CSC-MGMT
security-level 100
the IP 10.0.0.4 address 255.255.255.0
!
boot system Disk0: / asa821 - k8.bin
boot system Disk0: / asa843 - k8.bin
passive FTP mode
DNS server-group DefaultDNS
domain cisco.campus.com
permit same-security-traffic inter-interface
permit same-security-traffic intra-interface
object-group network cmps-lan
the object-group CSC - ip network
object-group network www-Interior
object-group network www-outside
object-group service tcp-80
object-group service udp-53
object-group service https
object-group service pop3
object-group service smtp
object-group service tcp80
object-group service http-s
object-group service pop3-110
object-group service smtp25
object-group service udp53
object-group service ssh
object-group service tcp-port
port udp-object-group service
object-group service ftp
object-group service ftp - data
object-group network csc1-ip
object-group service all-tcp-udp
access list INTERNET1-IN extended permit ip host 1.2.2.2 2.2.2.3
access-list extended SCC-OUT permit ip host 10.0.0.5 everything
list of access CAMPUS-LAN extended permitted tcp 172.16.0.0 255.255.0.0 any eq www
list of access CAMPUS-LAN extended permitted tcp 172.16.0.0 255.255.0.0 any https eq
list of access CAMPUS-LAN extended permitted tcp 172.16.0.0 255.255.0.0 any eq ssh
list of access CAMPUS-LAN extended permitted tcp 172.16.0.0 255.255.0.0 no matter what eq ftp
list of access CAMPUS-LAN extended permitted udp 172.16.0.0 255.255.0.0 no matter what eq field
list of access CAMPUS-LAN extended permitted tcp 172.16.0.0 255.255.0.0 any eq smtp
list of access CAMPUS-LAN extended permitted tcp 172.16.0.0 255.255.0.0 any eq pop3
access CAMPUS-wide LAN ip allowed list a whole
access-list CSC - acl note scan web and mail traffic
access-list CSC - acl extended permit tcp any any eq smtp
access-list CSC - acl extended permit tcp any any eq pop3
access-list CSC - acl note scan web and mail traffic
access-list extended INTERNET2-IN permit tcp any host 1.1.1.2 eq 993
access-list extended INTERNET2-IN permit tcp any host 1.1.1.2 eq imap4
access-list extended INTERNET2-IN permit tcp any host 1.1.1.2 eq 465
access-list extended INTERNET2-IN permit tcp any host 1.1.1.2 eq www
access-list extended INTERNET2-IN permit tcp any host 1.1.1.2 eq https
access-list extended INTERNET2-IN permit tcp any host 1.1.1.2 eq smtp
access-list extended INTERNET2-IN permit tcp any host 1.1.1.2 eq pop3
access-list extended INTERNET2-IN permit ip any host 1.1.1.2
access-list sheep extended ip 172.16.0.0 allow 255.255.0.0 172.16.0.0 255.255.0.0
access list DNS-inspect extended permit tcp any any eq field
access list DNS-inspect extended permit udp any any eq field
access-list extended capin permit ip host 172.16.1.234 all
access-list extended capin permit ip host 172.16.1.52 all
access-list extended capin permit ip any host 172.16.1.52
Capin list extended access permit ip host 172.16.0.82 172.16.0.61
Capin list extended access permit ip host 172.16.0.61 172.16.0.82
access-list extended capout permit ip host 2.2.2.2 everything
access-list extended capout permit ip any host 2.2.2.2
Access campus-lan_nat0_outbound extended ip 172.16.0.0 list allow 255.255.0.0 192.168.150.0 255.255.255.0
pager lines 24
Enable logging
debug logging in buffered memory
asdm of logging of information
Internet1-outside of MTU 1500
Internet2-outside of MTU 1500
interface-dmz MTU 1500
Campus-lan of MTU 1500
MTU 1500 CSC-MGMT
IP local pool 192.168.150.2 - 192.168.150.250 mask 255.255.255.0 vpnpool1
IP check path reverse interface internet2-outside
IP check path reverse interface interface-dmz
IP check path opposite campus-lan interface
IP check path reverse interface CSC-MGMT
no failover
ICMP unreachable rate-limit 1 burst-size 1
ASDM image disk0: / asdm - 621.bin
don't allow no asdm history
ARP timeout 14400
interface of global (internet1-outside) 1
interface of global (internet2-outside) 1
NAT (campus-lan) 0-campus-lan_nat0_outbound access list
NAT (campus-lan) 1 0.0.0.0 0.0.0.0
NAT (CSC-MGMT) 1 10.0.0.5 255.255.255.255
static (CSC-MGMT, internet2-outside) 2.2.2.3 10.0.0.5 netmask 255.255.255.255
Access-group INTERNET2-IN interface internet1-outside
group-access INTERNET1-IN interface internet2-outside
group-access CAMPUS-LAN in campus-lan interface
CSC-OUT access-group in SCC-MGMT interface
Internet2-outside route 0.0.0.0 0.0.0.0 2.2.2.5 1
Route internet1-outside 0.0.0.0 0.0.0.0 1.1.1.5 2
Timeout xlate 03:00
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
dynamic-access-policy-registration DfltAccessPolicy
the ssh LOCAL console AAA authentication
AAA authentication enable LOCAL console
Enable http server
http 10.0.0.2 255.255.255.255 CSC-MGMT
http 10.0.0.8 255.255.255.255 CSC-MGMT
HTTP 1.2.2.2 255.255.255.255 internet2-outside
HTTP 1.2.2.2 255.255.255.255 internet1-outside
No snmp server location
No snmp Server contact
Server enable SNMP traps snmp authentication linkup, linkdown cold start
Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
Crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
Crypto ipsec transform-set ESP-DES-SHA esp - esp-sha-hmac
Crypto ipsec transform-set ESP-DES-MD5 esp - esp-md5-hmac
Crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac
Crypto ipsec transform-set ESP-AES-256-SHA 256 - aes - esp esp-sha-hmac
Crypto ipsec transform-set ESP-AES-128-SHA aes - esp esp-sha-hmac
Crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
Crypto ipsec transform-set ESP-AES-128-MD5-esp - aes esp-md5-hmac
life crypto ipsec security association seconds 28800
Crypto ipsec kilobytes of life - safety 4608000 association
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 pfs set group5
Crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 value transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5
Crypto map internet2-outside_map 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP
crypto internet2-outside_map outside internet2 network interface card
Crypto ca trustpoint _SmartCallHome_ServerCA
Configure CRL
Crypto ca certificate chain _SmartCallHome_ServerCA
certificate ca xyzxyzxyzyxzxyzxyzxyzxxyzyxzyxzy
a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as
a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as
a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as
a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as
a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as
a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as
a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as
a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as
a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as
a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as
a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as
a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as
a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as
a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as
a67a897as a67a897as a67a897as a67a897as a67a897as
quit smoking
ISAKMP crypto enable internet2-outside
crypto ISAKMP policy 10
preshared authentication
aes encryption
md5 hash
Group 2
life 86400
Telnet 10.0.0.2 255.255.255.255 CSC-MGMT
Telnet 10.0.0.8 255.255.255.255 CSC-MGMT
Telnet timeout 5
SSH 1.2.3.3 255.255.255.240 internet1-outside
SSH 1.2.2.2 255.255.255.255 internet1-outside
SSH 1.2.2.2 255.255.255.255 internet2-outside
SSH timeout 5
Console timeout 0
a basic threat threat detection
Statistics-list of access threat detection
no statistical threat detection tcp-interception
WebVPN
internal VPN_TG_1 group policy
VPN_TG_1 group policy attributes
Protocol-tunnel-VPN IPSec
username ssochelpdesk encrypted password privilege 15 xxxxxxxxxxxxxx
privilege of encrypted password username administrator 15 xxxxxxxxxxxxxx
username vpnuser1 encrypted password privilege 0 xxxxxxxxxxxxxx
username vpnuser1 attributes
VPN-group-policy VPN_TG_1
type tunnel-group VPN_TG_1 remote access
attributes global-tunnel-group VPN_TG_1
address vpnpool1 pool
Group Policy - by default-VPN_TG_1
IPSec-attributes tunnel-group VPN_TG_1
pre-shared-key *.
!
class-map cmap-DNS
matches the access list DNS-inspect
CCS-class class-map
corresponds to the CSC - acl access list
!
!
type of policy-card inspect dns preset_dns_map
parameters
message-length maximum 512
Policy-map global_policy
CCS category
CSC help
cmap-DNS class
inspect the preset_dns_map dns
!
global service-policy global_policy
context of prompt hostname
Cryptochecksum: y0y0y0y0y0y0y0y0y0y0y0y0y0y
: end
Adding dynamic NAT for 192.168.150.0/24 on the external interface works, or works the sysopt connection permit VPN
Please tell what to do here, to pin all of the traffic Internet from VPN Clients.
That is, that I need clients connected via VPN tunnel, when connected to the internet, should have their addresses IP NAT'ted against the address of outside internet2 network 2.2.2.2 interface, as it happens for the customers of Campus (172.16.0.0/16)
I am well aware of all involved in here, so please be elaborative in your answers. Please let me know if you need more information about this configuration to respond to my request.
Thank you & best regards
MAXS
Hello
If possible, I'd like to see that a TCP connection attempt (e.g. http://www.google.com) in the ASDM logging of the VPN Client when you set up the dynamic NAT for the VPN Pool also.
I'll try also the command "packet - trace" on the SAA, while the VPN Client is connected to the ASA.
The command format is
packet-tracer intput tcp
That should tell what the SAA for this kind of package entering its "input" interface
Still can not see something wrong with the configuration (other than the statement of "nat" missing Dynamics PAT)
-Jouni
-
Please help with the problems of Vista SP2
So I spent all day on the forums here and I'm head over heels. I had problems with Windows update and some other problems on my Dell Studio XPS. It is a tower with double HDs in RAID mirror running Vista 64-bit with SP2.
I got it for 3 years and I thought that I clean and correct certain defects to go back to the original Dell factory condition. That did not fix the update install problem I did cleaning. Now it's worse.
I'm trying to install SP2 and get a catastrophic failure 0x8000ffff error-UNEXPECTED
The onlychange is that several months ago, one of my WD 640 GB drives factory failed and I replaced it with a Seagate Barracuda 1 TB since I couldn't find a 640 GB drive.
I tried to stop and restart all services BITS, etc. no luck.
I tried to run among the MS FixIt for the problem of update, but it fails because it says that it cannot initialize the powershell.
Help, please... I'm hopelessly lost and can not spend more money on this thing.
Thank you!
If you need additional help with the clean install, please start your own, new topic in this forum: http://answers.microsoft.com/en-us/windows/forum/windows_vista-system
If these procedures look too complex - and there is no shame in admitting this isn't your cup of tea - take the machine to a local, good reputation and independent (i.e., not a BigBoxStore or a Geek Squad) computer repair shop & ask them to do the job.
-
Original title: need help with the blue screen issue
My computer turns saying a blue screen: a problem has been detected and windows were shut down to prevent damage. The problem seems to be caused by the following file: NAVEXI5. SYS PAGE_FAULT_IN_NONPAGED_AREA he seems to have a different error whenever he turns to a blue screen. Can someone help me please.Hello
1. Since when are you facing this problem?
2. you remember to make changes to the system?
3. do you get an error with this error code?I suggest to unplug external devices such as printer, scanner, etc. that are plugged into the system, and then restart the system and check if the problem persists.
Method 1.
I suggest you to do a check disk from the recovery console and check if the problem is resolved. Follow the steps mentioned below.
a. start into the recovery console using the XP CD. Follow the steps mentioned in the article below.
Description of the Windows XP Recovery Console for advanced users
http://support.Microsoft.com/kb/314058
b. perform a disk check.
How to perform disk error checking in Windows XP
http://support.Microsoft.com/kb/315265Method 2.
I suggest you to start with the XP CD and then do a system restore. Follow the steps mentioned in the article below.
How do I recover from a corrupted registry that prevents Windows XP startup
http://support.Microsoft.com/kb/307545I hope this helps.
-
Please, I need urgent help. I can not install applications, the site says I have not produced, but I pay every month!
Hi Jose % 20Dieciseis,
I checked your account via email that you used to register on the support Forum, it shows not all subscription registered on your Adobe account.
could be a possibility that you used an e-mail to subscribe to the composition.
If there is no trouble finding that-
Please contact Adobe customer care http://helpx.adobe.com/contact.html
- Remember that you are logged on the page with your Adobe ID.
- Select your product and what you need help with
- Click on the blue box "still need help? Contact us. "
-
Need help with the installation of an adapter of graphics Super Palit GeForce 9500GT - 512 MB - DDR2 SDRAM in a M2N68 motherboard (narra6). Should I disable the onboard graphics in the bios? When the card is installed, no VGA work outs and the PC does not start. Checked and recontroler implementation of the card in the PCI slot. PC is a desktop HP G5200uk PC. Windows 7 operating system.
Hello
The link below is a guige to install a video card in your Pc. In particular, it seems that you will have to perhaps specify the location of the new card in the bios and save this change before you install the new card - see step 4 in the guide on the link below. If your new card fits into the PCI Express x 16 slot, you will need to define PCI Express in the bios and save the changes.
http://support.HP.com/us-en/document/c01700855
Kind regards
DP - K
Maybe you are looking for
-
Office p6750z - added optical drive
I add a DVD ROM to my existing hp (p6750z) desktop computer. I did similar to other computers upgrades in the past and I looked at the 6750z service and upgrade manual. I have one question - is is not clear to me how to remove the drive Bay cover i
-
Problem with usb boot on Satellite A-50
HelloI had a problem with a usb tip. When I insert a usb key, I can't start my computer by usb. I selected the option of a disk boot, but doesn't run. I have a "Satellite A-50-522. I have to update the bios? Greetings,
-
Satellite A200 PSE3E stops after the connection
Hello Very often, when I restart my laptop and after typing my password user, the screen goes black and the system stops the loading of windows.I can access the Task Manager by pressing Ctrl-Alt-Delete, but I can't make it go.And then, without doing
-
Shortcut icons and desktop Windows 7 file to change default
The shortcut icons for the Office 2010 applications on my desktop and icons for office and acrobat files have re-established a kind of default icon. Try to recreate the icon cache and restarting didn't work. The Microsoft fix - it rearranged only the
-
A Machine connects to the internet, the other not - why not?
I have 2 different machines (one Windows 7 the other Windows 8.1) who are sitting in the same room about 1 meter. The Windows 7 machine connects to the internet without any problem. Windows 8.1 machine fails to connect to the internet. Both machines