Need user name to connect to Skype computer en W7

Similar Questions

• How can I get the user name of the current user? Not the name of the user, but the user name is connected to.

  Anyone know how I can get the username of the current user? Not the name of the user, but the user name is connected to.

  Thank you!

  Only two variables that Captivate allows to work with are cpQuizInfoStudentName and cpQuizInfoStudentID, but the latter is only really designed to be used for the internal information server, not a typical SCORM LMS solution.

  Sounds to me like you may need to get hands on with the services of a JavaScript programmer.

• How to allow access to all users of the connection on my computer?

  How to allow access to all users of the connection on my computer?

  Your question is hard to understand.  I interpret as:

  "How to allow all the users on my computer to access some files or folders?

  The answer depends somewhat on the question of whether you have XP Pro or XP Home, but a general answer is found the following article.

  "How to use file sharing Simple to share files in Windows XP"
    <>http://support.Microsoft.com/kb/304040 >

  Click on "level 3: files in shared documents available to local users"

  HTH,
  JW

• I was using Microsoft Fix and one of the messages for me was that "more than one user is currently connected to this computer"

  While checking on Microsoft 'Fixit' to see if everything was working OK, I got a message saying as follows: more o no user is currently connected to this computer. »

  I can't understand this because I am the only user on my computer.  No other Member of my family is using my computer, so can you help me this please?

  Thank you.

  Hi Deepak B,.

  Thank you very much for your help.  I did as you suggested.  First: the Safety Scanner did not find a malware, etc. on my computer, which is really good.

  Second - accounts - outside myself - on my computer. I was surprised to see there was a guest account as well as mine.  I now extinct 'guest account '.  I can think about is my daughter and her husband who make us visit once a year.  April, my daughter knows a lot about computers, so I think that it is the culprit!

  That is the problem solved, and I am grateful for your help.

  ElmGrove

• session remote desktop connection logon message: another user is currently connected to this computer

  I'm trying to figure out how to make a remote desktop connection without the user on the computer, as I log to get to kickoff. When I start the DRC while the other computer is in use, I get a message saying... session remote desktop connection logon message another user is currently connected to this computer. If you continue, this user should disconnect from this computer. Do you want to continue?

  Click Start / Help, then search for help on the "fast user switching".

• forgotten user password to connect to the computer that works with Windows Vista Home

  version Windows vista home my daughter composed of a password that she can't remember now, we can't access the computer.  How to enter and reset this password without factory default and lose all the images and files?

  You can change your password to something that you remember another administrative user account. If you had only an administrative user account and you have forgotten the password, all is not lost. You can then follow the general recommendations for implementing user accounts in Vista that I will give you at the end of this post.

  All this requires a certain level of computer skills. You know better and that take the machine to a competent local computer tech (not a type of BigComputerStore/GeekSquad place) is the best solution for you.

  If you have an installation of Vista DVD (not a recovery DVDs), you can start the system with it. Select the default language, then select "repair your computer". Then select "Command Prompt". At the command prompt, type:

  NET user administrator / Active: Yes [press Enter]
  NET user [insert here the name of your user account] [insert the new password of user as 1234 here] [press Enter]

  [Note: do not enter the brackets!]

  Remove the installation DVD and restart the computer. Now, you will be able to connect to your user account by using the password that you set; for example, 1234.

  If you do not have a Vista installation DVD (only have a recovery disk), the computer mftr. may have given you the option to repair Vista (not a system recovery!) system in the diagnostic menu. This menu of diagnosis is the same one where you can choose Safe Mode. Get to this menu by repeatedly pressing the F8 key as the computer starts. If you do not have this option, you can make a bootable Vista file repair DVD in this link:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Note: All the Neosmart recovery disk downloads are torrent files. There is a good explanation of the torrent on the site Web of Neosmart files. You will need a torrent as muTorrent client to get the files. Torrent client will download the .iso file with which to create the bootable DVD. You will need to use third-party burning software such as Nero, Roxio or the free ImgBurn (http://www.imgburn.com ) to burn the image .iso image file, not in the form of data.

  Once you have fixed things, log on to the additional administrative account you will be made by the suggestions below and disable the administrator account integrated yet for security reasons:

  Start Orb > Search box > type: cmd
  When cmd appears in the above results, right-click and choose "Run as Administrator" [OK]. Now, you will get the command prompt. At the command prompt, type:

  NET user administrator / active: No. [Enter]

  Exit the command prompt.

  General recommendations for creating users in Vista:

  You absolutely don't want to have only one user account. As XP and all the other modern operating systems, Vista is a multi-user system with integrated system of accounts as default Administrator and comments. These accounts should be left alone because they are part of the structure of the operating system.

  In particular, you do not want one account user with administrative privileges on Vista because the administrator account integrated (normally only used in emergencies) is disabled by default. If you use as an administrator for your daily work, and this account is corrupt, things will be difficult.  It is not impossible to activate the built-in administrator to rescue things, but there may be more that you want to do. Better not to put you in a bad situation at first.

  The user account that is for your daily work must be a Standard user, with the extra administrative user (call it something like 'CompAdmin' or 'Tech' or similar) only it for elevation purposes. As a user Standard is recommended for security reasons and will help protect your computer against infections. After you have created "CompAdmin", connect to it and change your normal user account Standard. Then log on to your regular account.

  If you want to go directly to the desktop and ignore the Welcome screen with the icons of the user accounts, you can do this:

  Start Orb > Search box > type: netplwiz [Enter]
  Click continue (or provide an administrator password) when you are prompted by UAC

  Uncheck "users must enter a user name and password to use this computer". Select a user account to connect automatically by clicking on the account you want to highlight and press OK. Enter the password for this user account (when it exists) when you are prompted. Leave blank if there is no password (null). MS - MVP - Elephant Boy computers - don't panic!

• Run as pop up appears for the user account to connect to the computer

  Original title: security

  "When I turn on my computer, a smaller screen appears on the display of windows 'Run as' breast and ask which user account you want to use to run this computer", it then lists current user with a number that is similar to mine as an administrator with a checkbox. "or below cela" the following user ' to add details. I'm afraid that someone is trying to take over my computer. I have run Norton anti virus. How to stop what appears and get rid of it. This is a major threat. Paul

  Hi Paul,

  1. what anti-virus software do you use?

  2 you use the password while logging on to the user account?

  I suggest you of change the logon window and the shutdown preferences in Windows XP to resolve the problem.

  Setup configures Windows XP to use the friendly welcome logon screen and close buttons, if your computer is installed as a computer (a computer where a network domain has not been specified).

  This article describes how you can enable the classic logon screen used by Windows XP Server that resembles the following example:

  Log on to Windows

  User name: _______
  Password: __________

  To temporarily use the classic logon screen, press Ctrl + Alt + Delete twice on the Welcome logon screen.

  To configure Windows XP to use the classic logon and shutdown for each logon screens, follow these steps:

  a. click Startand then click Control Panel.
  b. double-click user accounts.
  c. click on change the way users log on or off the power.
  d. Click to uncheck the use the Welcome screen check box.

  Note: If you disable the Welcome logon screen, you also disable the fast user switching option.

  If you want users to press CTRL + ALT + DEL before the classic logon appears like a Windows XP-based computer that is joined to a domain, follow these steps:

  a. click Start, click run, type regedit in the Open box and then click OK.
  b. click the Winlogon subkey at the following registry location:
  HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon
  c. click change, click newand then click DWORD value.
  d. to change the name of the value, type DisableCADand press ENTER.
  e. keep the data value set to 0. The set of data values appear as 0x00000000 (0).

  Warning: Ask users to press CTRL + ALT + DEL before the classic logon screen appears.

  If you don't want that, then come back in a classic.

  Note: To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/ )

  How to back up and restore the registry in Windows

  For reference, click on the link below:

  http://www.Microsoft.com/security/PC-security/protect-PC.aspx

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  I hope this helps.

• How to manage stored user names and passwords on a computer under W7?

  I would like to remove a few names user ID in Yahoo.  Where can I manage these in W7?

  Hi KKBrown,

  Thanks for posting your question in the Microsoft Community Forum.

  It appears from the information you want to remove some names to user ID in Yahoo.

  It would be useful that you can answer these questions to help you best.

  1. you are trying to remove information from Yahoo mail?

  2. you access yahoo mail using the client program webmail or email?

  2. what web browser do you use?

  If you try to delete the user name or password stored on Web sites that you have visited previously by using internet explorer, you can see the article and check if that helps:

  DeleteAutoComplete information

  If you try to manage the usernames stored and passwords on Windows 7, you can use Credential Manager to store identification information such as usernames and passwords that you use to open log on to websites or other computers on a network.

  For more information, see the article:

  Store passwords, certificates, and other credentials for automatic logon

  Hope the helps of information.

  Let us know if you need help with Windows related issues. We will be happy to help you.

• Find the user name of connected people Foglight anytime

  I found the method in the safety Interface that will give me the number of active users, but is there a way to find the username of people who are connected?

  Following the code give me the int count of connected users, but I want the "username" instead of int count.

  def securityService = Server ["SecurityService"]

  Return (int) securityService.getActiveUserCount ();

  Hi Jonathon,

  As you mentioned, there is no method in SecurityService that returns a list of active users and getLastLogon solution would be misleading, because it refers users who may have already disconnected.

  Here is a script that checks the audit all the logs of the user connection and disconnections and returns a hash table that shows you the last action that each user took.

  Check the connection status of users for the last day. Note that, by default, inactive users are disconnected after 60 minutes.

  def auditService is server. AuditingService

  Calendar cal = Calendar.GetInstance)
  Date endDate = cal.getTime () //now

  Cal.Add (Calendar.DATE-1) //yesterday
  Date startDate = cal.getTime)

  auditRecList = auditService.getAuditLog (startDate, endDate)

  [HashMap userStatus = []]

  {auditRecList.reverseEach}
  {IT.each}
  auditRec->
  If (auditRec.getServiceName () .equals ("SecurityService") & auditRec.getOperationName () .equals ("httpsession")) {}

  userStatus.put (auditRec.getUserName (), auditRec.getName ())
  }
  }
  }

  return userStatus

  In my lab, it returns this result:

  [completed merve:Session, closed merve2:Session, foglight:Session creation]

  Hope that helps.

  Merve

• How to configure a user name to log in to ASA

  Hi all

  It's something really simple, but I don't see what else to say.

  I want to add a user name when connecting via putty or the ASDM, but for the moment all that I am asked is the enable password.

  Anyone can share with me what I need to add to be prompted for the user name.

  Thank you!

  Hello

  You can create a local user with the command:

  username cisco password cisco123 privilege 15

  Then to assign local ASDM and SSH authentication, you enter the command in respect of the case:

  AAA authentication http LOCAL console

  the ssh LOCAL console AAA authentication

  Best regards, please rate.

• Incrroect user name and password when you try to connect from another computer

  original title; Password pushed in desktop connection remote

  I want to connect my HP Mini 110 of my HP Compaq dc5750 PC compact format.

  But this problem continues to be on, I know my password and it works on my HP Compaq but when I connect a device to this pc, it says "password or user name is incorrect."
  Password is correct for HP Compaq PC
  User name is correct
  He tells me I need a password reset disk, probably, I know it won't work.

  Hey young Parker,

  ·         Did you do changes on the computer before the show?

  Make sure that you provide the password.

  You can also see the article for more information.

  Microsoft's strategy concerning lost or forgotten passwords

• Home computer laptop running Vista requires user name, password, and domain name to connect to my home network?

  I've had this laptop for 3 years with no problems. One day last week when I tried to connect to my network home as usual, I get a message saying: more information needed, and he asks user name and PW domain name. All other wireless devices work as usual, only my Vista laptop. I never set it to connect to a domain. If I try to manually remove and reconnect to the network I get the same error. How can I remove this domain setting so I can connect to my home network as usual?

  All the most popular tips...

  PS You may have guessed that I am no computer wiz!

  Thank you very much

  Hello

  Look at the configuration in Control Panel / System.

  See here http://www.ezlan.net/Win7/group_name.jpg

  Jack - Microsoft MVP, Windows networking. WWW.EZLAN.NET

• Connect you to Skype does not work with the correct user name and password

  I tried to login with my correct user name and password, but received the error: unable to connect to Skype.

  So, I reset the password and can log on the Skype website.

  Tried to connect to Skype and the same error: unable to connect to Skype.

  I use

  Mac OS X Version 10.9.5.

  Skype 5.8.0.1027.

  OK, I think I thought about it on my own. I had not used Skype for some time. I just DLed the latest version and here is my connection works fine. Hope this helps you.

• I added the user name to log on to the computer in the active directory after adding, I can't connect to the internal application by using the user name and password...

  Hello

  I added the user name to log on to the computer in the active directory after adding, I can't connect to the internal application by using the user name and password...

  Please give the solution

  What happens when you try to connect?

  If you are able to connect using the different account, try running gpupdate/force.

  If the problem persists, you can open the discussion on:

  http://social.technet.Microsoft.com/forums/Windows/en-us/home

  What is responsible technical issues forum.

• How to share an internet connection Wi - Fi, which requires the user name and password on a laptop computer of Windows 8 on a PC with Windows XP?

  I have Windows 8 on my laptop... and this laptop is connected to the internet via an USB-powered Wifi device, it takes an user name and password to connect to the internet otherwise it says limited connectivity and will not connect to internet... now, I have an old PC with Windows XP on it... the PC and laptop have built in LAN cards... I also have a cable that fits in the LAN cards... when I connect the two computers, LAN cards and Windows flashlights, they also show that they are connected to a local network... However, I can't use this Wifi connection on my laptop to share an internet connection with PC WIndows XP... I tried to fill, manually configure IP addresses, sharing connections, all with no luck... of many websites is a lot of confusion...: /... Please someone guide me step by step how can I make my XP PC to connect to the internet using the connection of the laptop...

  Hello Ashan,

  Thanks for the reply.

  You can try to follow the following suggestions to solve the problem.

  First, try to reset Internet Explorer and see if that helps.

  Reset Internet Explorer

  http://support.Microsoft.com/kb/923737

  Note: The Reset Internet Explorer Settings feature might reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings. Reset Internet Explorer is not reversible, and all the previous settings are lost after reset.

  Additional information:

  We can also refer to the computer or the device manufacturer's Web site and try to update the latest version of the network adapter drivers.

  (Also works for Windows 8)

  Updated a hardware driver that is not working properly

  To connect to the Internet

  http://Windows.Microsoft.com/en-us/Windows/Connect-Internet#1TC=Windows-8

  I hope this helps. Otherwise, feel free to write us again and we will be happy to help you.

  Thank you