need windows live. Vista blocks any attempt to use windows live. I need to send an e-mail by windows live

Similar Questions

• Need to send an e-mail once a target is reached

  Hey people, I'm having some trouble trying to reach a personal goal here. I am relatively new to Labview, then if it is quite obvious, try to cut me a little slack I try to send an email to myself, once a value from the comments on the front panel reaches or exceeds a target value. I check those values once a milli-second as part of a loop. If the entry is greater than or equal to the value of my target, then I send an email using the code of the VI of Gmail, which has been adopted here. I tested the Messaging code itself works very well, and I got sent emails several times. The only question I'm stuck with is that, given that I have check my entries every millisecond, if the input is higher than my target goal, an e-mail is sent every second telling case is true. Obviously, that's an exaggeration, because no one wants 1 million emails per day.

  What I would like, that's only an email to be sent whenever the case is true. So if this case is perhaps true that three times in a single day, while receives only one user three emails, rather than continuous e-mail in the period that goes from the case. I suppose that the best way to proceed is somewhat timed loop, but unfortunately, this is where my knowledge ends. If anyone has any ideas for solutions, I would appreciate it a lot.

  What the devil...

  I was not on the forum in a time long or with this username.

  

  When I say these subVIs in the commentary, I speak of the Boolean trigger and your VI , send e-mails.

  James

  It's free advice, you don't have to accept or even like it.

• Changes need to save before e-mailing

  OK I might be missing something here. I have a form where I need my 11 sites to choose their location. Once they do, they must fill out some information about the sub form that contains all their contact information. Once they have filled the data they need to send by e-mail to the customer. The customer needs to see the modified form. When I do a backup as the selection location re sub form appears and the customer will select the location for the employee data is entered to appear again. This does not work for me. I need the form not to return to the form of void location selection placeholder when it is sent by e-mail as an attachment.

  The reason is the employee fills out the data that are necessary to identify the best customer.

  The shape of sup of location selection will invisable when my staff choose their location. He needs to stay invisable once they have published the form and do a save as. Is not! It reappears when the attachment is opened. How can I stop.

  Thank you

  Richard Bane.

  Either way, I'm really starting to despise this software. I have not created a form with out having a few question to ask questions on the forums. There is no good tutorials on the web. And I spend hours trying all sorts of scenarios that do not work.

  Hang tough!

  To start, make sure that the file > properties > tab by default, changes to Preserve script is checked to automatic:

  

  Niall

• Adobe Acrobat is NOT COMPATIBLE with Windows Vista... it blocks any browser or operating system when I try to open any PDF... y at - it a patch?

  Adobe Acrobat is NOT COMPATIBLE with Windows Vista... it blocks any browser or operating system when I try to download or open any file PDF... y at - it a patch?

  When I try to open a PDF file in IE 7 or Firefox 3.6, or just on the desktop, I get a sign that says:

  "Program Compatibility Wizard".
  

  "This program has known compatibility issues - check online if the solutions are available on the Microsoft Web site. If we find solutions, Windows automatically displays a Web site that lists the steps, you can take. »

  "Program: . Acrobat Reader 7. Editor: "Adobe,location: C:\Program Files\Adobe\Acrobat 7.0\Reader\AcroRd32.exe.

  "Acrobat Reader 7 has a compatibility issue with this version of Windows. For an update compatible with this version of windows, contact Adobe. »

  "Search for solutions online - Run program - Cancel . "

  If I click on one of the 3 buttons listed above, the browser, it blocks or breaks down the entire operating system.

  Does anyone know of a patch for this... Adobe, what I find, has updated for Acrobat Reader, but they don't say if this is a patch for this problem of Vista incompatibility.

  I searched on the basis of knowledge of Microsoft and this forum and I can't find anything definitive on this question.

  I can not even download a PDF file, and still less open and looking at its content.

  Known fixes?

  Thank you

  NuMetro

  "numetro" wrote in message News: * e-mail address is removed from the privacy * .com...

  Adobe Acrobat is NOT COMPATIBLE with Windows Vista... it blocks any browser or operating system when I try to download or open any file PDF... y at - it a patch?

  When I try to open a PDF file in IE 7 or Firefox 3.6, or just on the desktop, I get a sign that says:

  "Program Compatibility Wizard".
  

  "This program has known compatibility issues - check online if the solutions are available on the Microsoft Web site. If we find solutions, Windows automatically displays a Web site that lists the steps, you can take. »

  "Program: . Acrobat Reader 7. Editor: "Adobe,location: C:\Program Files\Adobe\Acrobat 7.0\Reader\AcroRd32.exe.

  "Acrobat Reader 7 has a compatibility issue with this version of Windows. For an update compatible with this version of windows, contact Adobe. »

  "Search for solutions online - Run program - Cancel . "

  If I click on one of the 3 buttons listed above, the browser, it blocks or breaks down the entire operating system.

  Does anyone know of a patch for this... Adobe, what I find, has updated for Acrobat Reader, but they don't say if this is a patch for this problem of Vista incompatibility.

  I searched on the basis of knowledge of Microsoft and this forum and I can't find anything definitive on this question.

  I can not even download a PDF file, and still less open and looking at its content.

  Known fixes?

  Thank you

  NuMetro

  FAQ Adobe "Acrobat 7.0 and earlier versions do not support Windows Vista. Adobe does not plan to release updates to Acrobat 7.0 and earlier for Windows Vista compatibility. «You'll need to level of Acrobat 9 (or later) to ensure full compatibility with Vista and Win 7.»

• I get this notice when I try to send an e-mail: Windows Live Hotmail was not able to complete this application. Microsoft may contact you regarding any issue you are reporting. When I use Safari, I have no problem. in English

  I get this notice when I try to send an e-mail: Windows Live Hotmail was not able to complete this application. Microsoft may contact you regarding any issue you are reporting. When I use Safari, I have no problem.

  Clear the cache and cookies from sites that cause problems.

  "Clear the Cache":

  • Firefox > Preferences > advanced > network > storage (Cache) offline: 'clear now '.

  'Delete Cookies' sites causing problems:

  • Firefox > Preferences > privacy > Cookies: "show the Cookies".

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions of the origin of the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > appearance/themes).

  • Makes no changes on the start safe mode window.
  • https://support.Mozilla.com/kb/safe+mode
  • https://support.Mozilla.com/kb/troubleshooting+extensions+and+themes

• OK kids here it is: I have a VERY OLD VERSION 6.0 standard. I am doing work on a computer windows vista laptop. ANY IDEAS? I installed it but it keeps sending me to the site web adobe and support says that it KNOWS something THAT the guys

  OK kids here it is: I have a VERY OLD VERSION 6.0 standard. I am doing work on a computer windows vista laptop. ANY IDEAS? I installed it but it keeps sending me to the site web adobe and support says that it KNOWS something THAT the guys

  There is no way to get Acrobat 6 to be fully installed and works on any version of Windows beyond Windows XP, 32-bit only! There's a way to upgrade to cheap since Acrobat 6, who is now 6 versions behind the current version. Sorry!

  -Dov

• Any attempt to create results by "Access denied" error zip file

  Windows 7 Professional 64 bit.  I am logged in as administrator.  UAC is not active on this machine.

  Any attempt to create a zip file results in a dialog box stating "unable to complete the operation.  Access is denied. "

  If I select a file or group of files/folders, do a right click and say 'Send to Zip', I get this error.  Interestingly, while the error dialog box is still open, the zip file will be displayed in the current folder.  Clicking OK in the box dialog error cancels the dialog box and deletes the zip file.

  This seems to be some sort of permissions thing.  Can I create a zipfile by clicking right in the Explorer window by clicking on "new", then "compressed (zipped) folder", and it will create the file very well.  I can even give it a name.  Any attempt to copy anything in this new zip file generates an error "file not found or no read permission.  Try to delete the zip file says 'you need permission from administrators to make changes to this file.
  So now, I open the properties for the zip file and go to the Security tab.  It was there that I discovered that this file has no owner are entrusted to him.  I can then change owners, add my name as the owner of the file, assign full control to myself, apply the changes, and now the zip file can be read/written/removed normally.
  So whenever I need to create a zip file, I have to go through the steps of creating-> change the properties of the-> Assign owner-> Apply-> add files to the Zip file.  It's a royal pain in the keester.
  My question is: what changes to do to confide as the owner by default when a zip file is created?  This seems to happen with only zip files, any other type of file gives me this problem.  What happened since I got this computer brand new with Windows 7 64 - bit on it.  I can't say that it is a "Virgin" installation, he was photographed by a group of COMPUTER companies (I work for a fairly large company).  This group is a clue what happens and apparently others in our society do not report this problem.

  Solved! The problem is with the permissions on the 'TEMP' directory which is used during the process of zip. See this announcement and scroll down to "more useful answer.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-files/when-i-try-to-use-the-send-to-compressed-zipped/264ba861-1262-4181-94ed-0f00325604f5

• Hi ALL, did any attempt on the virtual computer NETWORK load balancing using HYPERV on UCS blades

  I try to configure the CASE server cluster by using the Unicast NLB on the virtual machine on different blades on the UCS, it works for awhile, then he abandoned packages.

  I heard that this screenplay of unicast is not supported in the UCS when she used END-host mode in the fabric interconnet...? any attempted before.

  Would it, I use the multicast mode is that something needs to be done on the FBI62020 or the LAN switch upstream. ??

  Header note I found on the implementation of UCS for mulitcast NLBL:

  Microsoft NLB can be deployed in 3 modes:

  Unicast

  Multicast

  IGMP multicast

  For series B UCS deployments, we have seen that the multicast and IGMP multicast work.

  IGMP multicast mode seems to be the more reliable deployment mode.

  To do this, the monitoring settings:

  All NLB Microsoft value "Multicast IGMP" nodes.  Important!  Check ths by logging into EACH node independently.  Do not rely on the MMC of NLB snap.

  An IGMP applicant must be present on the VLAN of NLB.  If PIM is enabled on the VIRTUAL LAN that is your interrogator.  UCS cannot function as applicant IGMP.  If an interrogator of functioning is not present, NLB IGMP mode will not work.

  You must have a static ARP entry on cheating it upstream pointing IP address Unicast NLB on the multicast MAC address NETWORK load balancing.  This need will set up, of course, on the VLAN of the NLB VIP. The key is that the routing for the NLB VLAN interface must use this ARP entry as a unicast IP ARP response may not contain a multicast mac address. (Violation of the RFC 1812)  Hosts on the NLB VLAN must also use the static entry.  You may have several entries ARP.  IOS can use a function of 'alias' of ARP. (Google it.)

  How Microsoft NLB works. -The truncated for brevity Mac addresses.

  TOPOLOGY OF NLB MS

  NETWORK VLAN 10 = subnet 10.1.1.0/24 IP load balancing

  VIP = 10.1.1.10 NETWORK LOAD BALANCING

  Arp entry static switch advanced IP 10.1.1.10 upstream to MAC 01

  NLB VIP (MAC 01, IP 10.1.1.10)

  NODE-A (AA, MAC IP:10.1.1.88)

  NŒUD-B (MAC BB, IP:10.1.1.99)

  Using the IGMP snooping and interrogator VLAN snooping table is filled with the mac NLB address and groups pointing to the appropriate L2 ports.

  MS NLB nodes will send the responses of IGMP queries.

  This snooping table could take 30 to 60 seconds to complete.

  Host on VLAN 200 (10.200.1.35) sends traffic to NETWORK VIP (10.1.1.10) load balancing

  It goes of course to VLAN 10 interface that uses the static ARP entry to resolve to address MAC 01 VIP NETWORK load balancing.

  Since it is a multicast frame destination it will be forward by the IGMP snooping table.

  The framework will arrive at ALL NLB nodes. (NŒUD-A & NŒUD-B)

  NLB nodes will use its load balancing algorithm to determine which node will manage the TCP session.

  Only one NLB node will respond to this host with TCP ACK to start the session.

  NOTES

  This works in a VMware with N1k, standard vSwtich and vDS environment. Where surveillance IGMP is not enabled, the framing for VIP MAC NETWORK load balancing will be flooded.

  NLB can only work with TCP-based services.

  As stated previously mapping an IP unicast to a multicast mac address is a violation implied by RFC 1812.

  TROUBLESHOOTING

  Make sure your interrogator is working. Just to clarify that this does not mean that it is actually at work.

  Wireshark lets check that IGMP queries are received by the NLB nodes.

  Make sure that the ARP response works as expected.  Once Wireshark again is your friend.

  Look at the paintings IGMP snooping. Validate the L2 ports appearing as expected.

  CSCtx27555 [Bug-preview for CSCtx27555] Unknown multicast with destination outside the range MAC 01:xx: are deleted. (6200 FI fixed in 2.0.2m)

  IGMP mode not affected.

  CSCtx27555    Unknown multicast with destination outside the range MAC 01:xx: are deleted.

  http://Tools.Cisco.com/support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCtx27555

  fixed in 2.0(2m)

  Solution: Change the NLB mode of operation of "Multicast" to "multicast IGMP', which modifies balancing load NETWORK VIP MAC at 0100.5exx.xxx Beach, allows to transfer occur as expected.

  Q: and if I switch to switch mode, which means all of the profile and the settings on the servers are completely exhausted and I need to recreate them. ???

  A:Cisco Unified Computing System Ethernet switching Modes

  http://www.Cisco.com/en/us/solutions/collateral/ns340/ns517/ns224/ns944/whitepaper_c11-701962.html

  -There is no impact on the configuration, you have done service profiles.  they will continue to work as expected.  Mode selector has the FI behave more like a conventional switch.  Most notable is that Spanning tree will be activated and if you have several uplinks yew, tree covering weight will begin to block redundant paths.

  You need to review your topology and what impact tree covering weight.  Generally, we at the switch port upstream defined as "edge master", you want to delete this line.

  For pre-production and laboratory environment, PDI can help qualified with the planning, design and implementation partners.  Given to review the IDP site and open a case if you need more detailed assistance.

• Netfxupdate.exe is safe? Is Vista blocking from running at startup

  Windows Vista blocks the netfxupdate.exe to run at startup. Read mixed opinions on this. Some say that the safe, others say delete. Editor arrives at Microsoft, but is not signed.

  Can someone give me a definitive answer on this one? Preferably someone from Microsoft.
  See you soon.

  Hi justinleelondon,

  Here is a thread with a response from a Microsoft Support person who is marked as the answer that tells you not only this course, but you tells how to fix the block: http://answers.microsoft.com/en-us/windows/forum/windows_vista-security/netfxupdateexe-is-blocked-from-loading-from-the/3da3441d-8af0-4b67-919d-be4f1dbad6d1.

  I hope this helps.

  Good luck!

• On a five year MacPRo, when you try to open a document all stored documents seem to open at the same time, any attempt to stop them results in the cigarette or the seizure of MacPro... of ideas is what the cause/solution?

  On a five year MAcPro, when you try to open a document, all stored documents seem to open at the same time and any attempt to close results in the MacPRo gel for a long period. Ideas for cause and ideas for a solution?

  You have a Mac Pro or a MacBook Pro?

• How do you get by Windows Live Mail. When I click it, I can get a message box indicating that it running a task to send two e-mails:

  I'm unable to access my Windows Live Mail.  No matter what I do, I always come with a message box that indicates that she "performs a task" of sending two e-mails.  There is no error reported.  I can't get beyond this area.

  Submit all Live queries on the forum right here:

  Windows Live Solution Center
  http://windowslivehelp.com/

• I am new to the ethernet communication using labview. I don't have any material. I have two laptop, I need to send and receive data through these 2 portable by using labview. Kindly help me on this.

  I am new to the ethernet communication using labview. I don't have any material. I have two laptop, I need to send and receive data through these 2 portable by using labview. Kindly help me on this.

  Dennis has already said: for a direct PC - PC connection, you need a cross over cable. If you connect through a router or a switch, you use a standard cable.

• Samsung SCX 4200 printer spooler service is not running"error; any attempt to add a local printer

  Samsung SCX 4200 printer spooler service is not running"error; any attempt to add a local printer

  For example, the print spooler runs?

  Type Services.msc in the box run from the start menu and check the parameters print spooler, set it to auto start.

  John

• Computer crash xp pro have attempted to use the console to restore windows, but im not a good enough geek to type orders correctly is a more automated way to boot from the CD to reinstall the CD?

  Computer crash xp pro have attempted to use the console to restore windows, but im not a good enough geek to type orders correctly is a more automated way to boot from the CD to reinstall the CD?  There is a lot of argument about deplacerb help pages the correct process and commands to use I don't want to do more damage.

  Thank you

  Hello

  I suggest you to visit these links and check if it helps:

  How to install and use the Recovery Console in Windows XP:
  http://support.Microsoft.com/kb/307654

  Description of the Windows XP Recovery Console for advanced users:
  http://support.Microsoft.com/kb/314058

  How to perform an upgrade on the spot (reinstallation) of Windows XP:
  http://support.Microsoft.com/kb/978788

  Check if that helps.

• I am a user of windows vista and you want to use windows xp, then I have to do?

  I am a user under windows vista license so can I use Windows xp?
  If so, how?
  If not what do I have to use windows xp?

  You must have a copy of Windows XP, which is no longer made or sold. If you can find one, you can buy it.
  Then you have to reformat your computer and install it instead of vista, ensuring that your computer is capable of running, and the manufacturer of the computer has all the necessary drivers.