Needs to switch WLan activating / deactivating after each reboot on Equium A100-027

Similar Questions

• iMessage and facetime activation requires after each reboot.

  Hello

  I updated my iphone 6 + with ios10 update and since after that whenever I restart my device I need to reactivate my cell phone for iMessage and facetime and make me pay for activation causing SMS carrier charges.

  To confirm that I'm not changing any how sim or anything like that just a simple reboot and I need to recheck my number every time with activation of SMS.

  Hey pulkitgupta23,

  I understand that you have a problem with your iPhone and iOS 10 where you have to reactivate your phone number for iMessage and FaceTime, every time that you restart your iPhone. We want to help you to get to the bottom of this and resolve this problem, so let's start with a few basic steps. I have some suggestions for you in the following article that could help us solve it correctly:

  If you get an error when you try to activate FaceTime - Apple Support or iMessage

  Check your camera settings

  1. Make sure that you are connected to a Wi - Fi or cellular data. If you use an iPhone, you will need the SMS messaging to activate your phone number with iMessage and FaceTime. Depending on your operator, you might be charged for the SMS.
  2. Go to settings > general > Date & time and make sure that you have configured your time zone correctly.

  Stop and restart iMessage and FaceTime

  1. Go to settings > Messages and turn off of iMessage.
  2. Go to settings > FaceTime and turn off FaceTime.
  3. Restart your device.
  4. Turn on iMessage and FaceTime.

  Try following these procedures, such as written and let us know the results. If the problem is still not resolved, try to provide as much detail as possible in your message tracking, including information on the first time, you have noticed the issue and source of your internet connection when the question is displayed. Thank you for joining the Apple Support communities with your questions!

• Notification of App calendar activated after each reboot

  Hello

  I use the calendar app Google Calendar of Playstore. Then I turned off the notifications the calender app preinstalles form.

  After each reboot notification by default calendar app settings are enabled if I get all notifications of calendar twice. Google Calendar and the calendar preinstalles application.

  There seems to be a bug, because a repair with the android firmware installation actually lollipop has no effect.

  Can you reproduce this bug?

  Thank you!

  @ThundiX

  If you disable an app, that it will not turn on unless you go to

  Settings > applications > select the application > activate.

• Downloaded Windows 10. Yet, after each reboot, windows 7 restart... no windows 10?

  Original title: Windows 10

  I have a laptop with windows 7 installed. I ran a few the applet to see if the laptop is eligible. He did, and I see the windows icon 10 appearing in the task bar. I click on it to get the upgrade and windows starts the download process. Then after it is downloaded double click on the file and it seems to be the installation. This seems to go to the end and I restarted several times when asked to do so.

  Yet, after each reboot, windows 7 restart... no windows 10.

  Review:

  • How to: 10 tips before installing Windows 10
  • How to: 10 things to do if the Windows 10 install fails.

  Retry the upgrade manually:

  Option 1:

  Download the media creation tool

  Click with the right button on the MediaCreationTool.exe file and then click on run as administrator.

  

  Note: How to check if you are downloaded or installed the update Windows 10 November

  How to create an ISO or USB drive.

  Select upgrade this PC now and then click Next

  

  Option 2:

  Task of pre-required

  When you make significant changes to your computer for example updated operating system, you must always back up. See the links to resources on the backup by clicking the link for each version of Windows you are using: Windows XP, Windows Vista, Windows 7, Windows 8/8.1

  • How to back up and restore your files manually
  • How to free up disk space in Windows
  • How to: 10 tips before installing Windows 10

  then

  • How to download official Windows 10 ISO files
  • How to: upgrade previous versions of Windows using the file ISO for Windows 10

  then

  • Turn off (preferably uninstall) your Antivirus utility before you perform the upgrade.
  • Reboot several times, and then try again.
  • Disable the general USB peripherals (for example - smart card reader).
  • If you are using a SCSI drive, make sure you have the drivers available for your storage on a thumdrive device and it is connected. During the installation of Windows 10, click on the advanced custom Option and use the command load driver to load the driver for the SCSI drive. If this does not work and the installer still fails, consider switching to an IDE based hard drive.
  • Perform a clean boot, restart, and then try again.
  • If you upgrade to the. ISO file, disconnect from the Internet during the installation, if you are connected in LAN (Ethernet) or wireless, disable both, then try to install.
  • If you are updated through Windows Update, when download reaches 100% disconnect from the LAN (Ethernet) Internet or Wi - Fi, then proceed with the installation.
  • If this does not work, try using the. ISO file to upgrade if possible.
  • If you are connected to a domain, go to a local account.
  • If you have an external equipment, attached to the machine, unplug them (example, game controllers, USB sticks, external hard drive, printers, peripherals not essential).

• Folder permissions resets automatically after each reboot

  Hello

  I have windows 7 x 64 user. There is a problem with google reader I need different from that of the default permissions for C:\Users\\AppData\Local\Temp. I changed the permissions in this way: make a right click-> Security-> advanced-> permissions-> change approval-> clicked on include... inherited permissions and replace the child object permissions... Also, the folder option, I changed the hidden folders. However, after each reboot, I see not hidden files (hidden folder option resets to do not show hidden file) and permissions for resetting folder above. What causes reset of the changed properties? I have no optimizer tool except ccleaner. I use mcafee antivirus. I think that mcafee is unlikely to cause this problem. 
  How can I solve this problem? I tried to make the batch file that runs boot, but I can't use option "inherit permissions". I give you the batch commands:
  ICACLS C:\Users\\AppData\Local\Temp /setowner directors

  ICACLS "C:\Users\\AppData\Local\Temp" / grant everyone: F
  But these commands do not work to change the permissions in the manner described above.
  Help, please. Really need help.

  ICACLS C:\Users\\AppData\Local\Temp /setowner directors

  ICACLS "C:\Users\\AppData\Local\Temp" / grant everyone: F

  But these commands do not work to change the permissions in the manner described above.

  Help, please. Really need help.

  There was a similar post last week which unfortunately has fizzed out (as do about 95% of all messages...).  Maybe you can gather enough energy not only to track down the source of your problem, but also post an answer here.

  The following commands do not work:
  takeown /f "%Temp%" /.
  Cacls "%Temp%" / t/g everyone: F
  (answer Y to the prompt)
  And Yes, I know cacls.exe is deprecated. But it still works!

• Firefox cleans the exceptions list 'Allowed Sites - Installation of modules' after each reboot.

  Firefox cleans the exceptions list 'Allowed Sites - Installation of modules' after each reboot. I tried the new own profile - everything works fine. I don't want to installation and implementing all addons after reset of profile, so try to understand the problem.

  Compensation for the "Site Preferences" (in the "Clear recent history" or Ctrl + Shift + Delete) same for the "last time" helped.

  (permissions.sqlite contained an empty table instead of default lines)

• AVG detects viruses, C:\sccfg.sys if I scan and delete, it will appear after each reboot.

  Original title: C:\sccfg.sys

  AVG detects C:\sccfg.sys
  What is a rootkit?
  How can I get rid of it permanently?
  I ask AVG Anti-virus (free) to cope - AVV, then asks me to restart the computer
  After the re - start AVG advises me that the threat has been eliminated.
  AVG analysis finds no problem for the next (approx.) 2-3 weeks
  Then, the threat is detected again.
  I have lived this cycle several times now.
  BUT I want to get rid of the threat for good.

  Internet search suggests this threat comes from a program called "Folder Lock", (which I had installed for several years) but AVG has only been reported as a threat for maybe three months.
  Research on the Internet tells me that the problem cannot be solved by uninstalling "Folder Lock"

  How can I get rid of this threat?

  Hi Leeds,

  It seems that AVG detects C:\sccfg.sys as virus, if you scan and delete, it will appear after each reboot.

  Let's run the virus scan in safe mode with networking:

  Check out this link to start your computer in safe mode with networking:

  A description of the options to boot in Safe Mode Windows XP http://support.microsoft.com/kb/315222

  After starting in safe mode with network, virus using AVG anti-virus scanner.

  With AVG Anti-virus, perform a full scan using the Microsoft Safety Scanner.

  Refer to this link:

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  I hope this helps!

• My desktop icons keep stepping back to the left side down after each reboot.

  Micons office keep movong

  I am running Win XP with Vista Upgrade. All of a sudden my desktop icons keep stepping back to the left side down after each reboot

  I am running Win XP with Vista Upgrade. All of a sudden my desktop icons keep stepping back to the left side down after each reboot

  Try this tutorial. It worked for me when I had Vista 32 bit. I used to have more than 150 shortcuts on deskops, and they tended to move 'by themselves' as you said. This tutorial below worked for me.

  http://www.howtogeek.com/HOWTO/Windows-Vista/save-and-restore-desktop-icon-layout-in-Windows-Vista/

  Note: the tutorial is done for Vista 32 bit.

  Is a 64-bit installation program which I have not tried. I can't guarantee that.

• I need a driver of Wi - FI for Equium A100-027

  I have a Toshiba Equium A100-027 with the mobile Adapter.The Wi - Fi Atheros AR5006EG runs on Windows XP and I need a software to use the wireless adapter. Could someone help me somehow?

  The pilot had a Genuiune Windows Vista but he worked slowly and I changed the XP operating system.

  All you need is the right driver for wireless network card. A special software is unnecessary, because you can configure WIFI using WLAN Windows settings.

• Do I need to buy the adapter for Equium A100-027 wireless?

  Hi, don't want to seem like a fool but, can anyone tell me if I need to buy an adapter for my Equium A100-027 wireless? Not very good with the technical aspects, I'm afraid and do not want to buy anything I don't need! Thank you

  Hi mate, no you do not, its construction, his side had the cd player is close to the two usb ports...

  Post edited by: GhostUK

• Equium A100-027: after installing XP no sound

  After buying an Equium A100-027 with pre-installed Vista Home, I had to remove this in order to recharge with XP Pro SP2 to join to the domain of my company.

  Everything is installed properly and audio drivers are also present and work according to the Device Manager but no sound is heard. Also, I can't install the SRS Tru Surround driver because of the error message saying not supported on this computer.

  Post edited by: mike_kilby

  Hello

  Where did you download the XP drivers?
  Did you use the right method?

  For me it s a clear error message-> the driver cannot be installed because the phone does not support. You must use a compatible.

  Equium A100 is very similar to the Satellite A100. Try the drivers in this section and check the different versions

• Having to reinstall the Flash after each reboot.

  Windows 7 - IE9 - Flash version 11.0.1.152 - Plugins and OS update - ESET Smart Securty 4

  I am prompted to install the new version of Flash after a reboot, then, it happens at least once a day.

  I have install Flash and he moved very well and works until the PC starts again.

  I tried some of the following:

  -Use the Adobe Flash uninstaller before installing

  -Using the stand-alone Installer

  -Checked filter ActiveX and it has been off... turning on the causes

  This same behavior, but the problem I have has nothing to do with the filter

  Not sure when this started, but the user does not have this problem until recently.

  I use ESET Smart Security 4. On all of our systems, and that his PC is the only

  one that has a problem. Need elements pretty hard until I took the trouble

  with uninstall ESET just to see if that would help.

  The part that is really strange... If I manage add on, when it is running,

  I see that the Flash player it and name of Adobe here and that it is enabled.

  After I reboot and go into the Add-ons Manager, Flash is still there and still

  activated, but it now says "Unknown" instead of "Adobe" and is therefore no longer

  other programs Adobe listed. But then, when I reinstall, which becomes

  'fixed' and now, Adobe still says. So it seems almost like a problem of IE9

  and maybe a problem of corruption. No known problems with the PC. I guess

  reload from PC to starting from scratch would fix the problem... at least I hope he would,

  but I'm not ready for the main surgery if there is an easier solution.

  The TakeOwnership script took care of the problem. I'm not 100% OK with it, because it seems to just move UAC and a decrease in security. But at least it now seems to work the way it is supposed to in IE9 and I still probably charge this PC from scratch at an opportune time. Thank you!

• I tried to upgrade to Firefox Ver 28, but after each reboot it always shows the version 27.0.1

  I had been using Firefox Ver 26 and each time it restarts, there is a prompt to upgrade to version 28. I tried to install the upgrade and even after a reboot, continued the old version. Twelve, I uninstalled Firefox and installed new worm 27.0.1 when I check for the upgrade, it downloads a 15 MB file, but continues with worm 27.0.7 even after reboot. Am I missing something?

  1. Download the installer for the language you are interested in.
     • http://www.Mozilla.org/Firefox/all/
  2. Release of Firefox.
  3. Uninstall Firefox from the control panel. DO NOT tick the option on the deletion of your personal data and customizations.
  4. Run the installer downloaded previously.

• Computer failed to recognize 'Expert MMO Gaming Mouse Razer Naga' after each reboot.

  I have a razor naga, I had Software Web site that work very well for the pilots.  I had install a 2.0 synap every sence when I start my computer with my pc does not but the razor on the rise. I have to unplug the mouse and plug it back it to this work.

  Original title: Razer Naga Expert MMO Gaming Mouse

  Hello

  1. What version of the Windows operating system installed on your computer?
  2. What is the model number of mouse?
  3. What is the make and model of computer?

  Try the following basic methods and check after each method:

  Method 1: Run hardware and devices Troubleshooter.

  Method 2: mouse, touchpad and keyboard with Windows problems

  It will be useful.

• Create a Windows 7 user profile which resets after each reboot.

  I want to configure a limited in Windows 7 user profile that performs the following steps after EACH restart or disconnection:

  • Reset the background / theme
  • Reset the desktop icons / shortcuts
  • Network mapped reset drives
  • Reset saved passwords
  • Delete the data stored since the last session
  • Remove newly installed applications / block the installation of the application
  • Reset the print queue to empty - if it was not already
  • Reset the default printer
  • Reset the homepage Internet Explore & settings
  • Reset the screen resolution

  The idea is to create a profile for workstations in an office of the admin who works a bit like an internet café. They have a couple of shared workstations, a network printer, and they store the data on a file server and work on a local application server.

  The current problem is that they constantly record their passwords, remove network drives and change the General configuration of work stations (by chance), which makes it difficult for other users to work - that they do not recognize the look & feel and now don't know where to do what.

  I want to create a 'shared' user profile where they can log on, and everything looks familiar. All settings are saved as defaults and no matter what you do, as soon as you log out or restart, the parameters of return by default.

  I would appreciate help.

  Here are a few options:

  • Windows steady state (http://www.microsoft.com/windows/products/winfamily/sharedaccess/default.mspx). The product is supported for Windows XP and Vista, but maybe it works for Windows 7 too. Or maybe there is an equivalent Windows 7 somewhere.
  • Create a scheduled task that runs at boot time. You must run this command:
    Robocopy c:\Users\UserName.bak c:\Users\UserName/s / r: 1 w:1 /MIR /IS /IT /np 1 > c:\Windows\temp\restore.log 2 > & 1
    Note this:
    -Before starting, you must use the robocopy command in reverse so that it fills the C:\Users\UserName.bak folder.
    -The task must be run under the system account.
    -The task will run with the highest privileges.
    -Use during the testing of the installation log file. Subsequently you can pass you.
    -L' tool does not reset passwords. You must create a policy that prevents users from changing the password.