Neither 1764 and line scan.

Similar Questions

• How to make the default text size and line spacing in small Sticky Notes?

  How to make the default text size and line spacing in small Sticky Notes

  Hello

  I suggest that you try the method below and check if it helps.

  Method 1: analysis of auditor of file system (CFS)

  System File Checker is a Windows utility that allows users to find corruptions in Windows system files and restore the damaged files. To perform a scan of the SFC, check out the link: https://support.microsoft.com/en-us/kb/929833.

  Note: the steps for Windows 8/8.1, works perfectly with Windows 10.

  Method 2: clean boot

  A clean boot is executed to start Windows by using a minimal set of drivers and startup programs. This will eliminate software conflicts that occur when you install a program, an update or when you run a program in Windows. Follow the link to perform the clean boot: https://support.microsoft.com/en-us/kb/929135.

  Kind regards

  Angelo bar

  Microsoft community

• Is it possible to comment "move to the back, behind the text and lines?

  Is it possible to comment "move to the back, behind the text and lines?

  I use Acrobat X Standard to 'highlight' lines to aid of comment lines 12pt width and opacity of 50% on DWG files converted to PDF.  The opacity setting makes it legible behind the highlighting of the text and the lines, but the colors do not print.  Move the highlight behind the text and existing lines would allow me to use 100% opacity with more vibrant colors.

  Before, we have highlighted by hand, but these colors do not scan or copy well.  Highlight scanning is cleaner and can be changed without restarting.  "Comment" lines can be applied by Acrobat Standard, Acrobat Pro, and Acrobat Reader, so there is an advantage.  Even more important is that the average size of a print 11 x 17 which is highlighted and scanned in color is 1000 KB, while doing it in this way, they tend to be 100-150 KB, and the text remains searchable. If there is that people are using another system, I'm open to that instead.  I did not look to do the highlighting in AutoCAD.

  Of course, everything I do is protected and cannot be shared, sorry.

  Thank you.

  Post edited by: Nathan Goldblatt

  No, this is not really an option.

• Right side of the browser blurred and lines appear

  The right side of the nightly build has a serious bug. The right has a blurry text and lines appear on the Mozilla site.

  There is a bug for this report: https://bugzilla.mozilla.org/show_bug.cgi?id=1043961

• Switching between microphone and line-in in the Realltek Sound Manager

  Ok.
  Now I know where the Realtek Sound Manager, and I can control the parameters of the microphone and speakers.
  But how can I switch between microphone and line-in?
  At the moment I don't see a line of component option snap at all. Is it because it's a kind of auto detect and the opportunity every time I connect something?
  Everyone knows this, or has some experience in this regard?
  Cordially in advance
  Frans

  Sorry but I don't understand what exactly you want.
  You have built in mic or you can use the external microphone connected to the mic-in port.
  When the external microphone is connected a resident will be disabled.

  The question is: what do you want exactly and for what purposes? Please explain what is the reason for this switching between mic and line-in port?

• Satellite M307 - a lot of points and lines on the screen

  I bought this new pc in China there is a half year
  However, when I move the screen today, there are still a lot of points and lines in this respect.

  But if I don't touch it, it will be OK. I think this may be caused by the connection between the screen and the main physical system. Please contact me: [email protected]

  Thank you!

  Hello!

  I agree with you it's a connection problem or the display is faulty.

  I think your laptop should be still under warranty then I would go to a local ASP.
  They can order all the necessary parts and Exchange.

  Good bye

• Programmatically set the size of a table control (not the number of col and lines)

  Hi all

  I am trying to create a little VI, in which the user selects the number of columns and rows in a table, and after clicking on a button 'OK', the table control is displayed in the control panel (to be filled in by the user). To do this, I use the nodes property to the number of columns and lines. I have no problem with that.

  However, I want to "limit" the size of the control table (control of himself, not the dimensions of the table) and make use of vertical and horizontal table, the scroll bars. I want to avoid it is that passes type 100 user and 100 lines and appears a huge table control.

  I could tho this by using an array instead of an array, via the node property "size", but I would use an insead table a table.

  Thank you very much

  Daniel

  With a table control, you cannot set the display size to be anything other than a multiple of a complete cell.

  If you are limited to a number of lines and columns.  If you want to resize with more control you also need to resize the control within the Bay, accessible via the property 'picture Element '.

  Another option (but seems huge exaggerated) is to place your table in a secondary and set the size of the secondary to the size you need and enable scrollbars for her.  It is not an option that I would choose but if it helps...

  Have it, your description of your user interface sounds not very intuitive.  How the user knows at any time exactly what cell they access if they have to scroll backwards?

• How to query the total number of columns and lines filled with data?

  How to get the number of rows and columns in Exel file data using Excel report?

  Since you have posted this question in the forum of LabWindows/CVI, I guess you want to know how to do with CVI.

  You need to know how to open and activate the Excel data file.

  Depending on the function returns the total number of columns and lines col_count row_count, respectively.

  -----------------------------------------------------------------------------------------------------------------------------------------

  int CountColumnsAndRows (void)
  {
  Error HRESULT = 0;
  CAObjHandle rangeCurrentRegionHandle = 0;
  CAObjHandle rangeColumnsHandle = 0;
  CAObjHandle rangeRowsHandle = 0;
    
  unsigned long col_count = 0, row_count = 0;
    
  Must use the 'A1' property and CruuentRegion count the total of columns and lines, including the drafts!
    
  error = CA_VariantSetCString (& MyCellRangeV, 'A1');
    
  error = Excel_WorksheetRange (ExcelWorksheetHandle, NULL, MyCellRangeV, CA_DEFAULT_VAL, & ExcelRangeHandle);
  If (error<0) goto="">
    
  error = Excel_GetProperty (ExcelRangeHandle, & ErrorInfo, Excel_RangeCurrentRegion, CAVT_OBJHANDLE, & rangeCurrentRegionHandle);
  If (error<0)  goto="" error="">
    
  error = Excel_GetProperty (rangeCurrentRegionHandle, & ErrorInfo, Excel_RangeColumns, CAVT_OBJHANDLE, & rangeColumnsHandle);
  If (error<0)  goto="" error="">
    
  error = Excel_GetProperty (rangeColumnsHandle, & ErrorInfo, Excel_RangeCount, CAVT_LONG, & col_count);
  If (error<0) goto="">
    
  error = Excel_GetProperty (rangeCurrentRegionHandle, & ErrorInfo, Excel_RangeRows, CAVT_OBJHANDLE, & rangeRowsHandle);
  If (error<0)  goto="" error="">
    
  error = Excel_GetProperty (rangeRowsHandle, & ErrorInfo, Excel_RangeCount, CAVT_LONG, & row_count);
  If (error<0) goto="">

  Error:

  CA_VariantClear (& MyCellRangeV);
  CA_VariantClear (& MyVariant);
  ClearObjHandle (& ExcelRangeHandle);
  ClearObjHandle (& rangeCurrentRegionHandle);
  ClearObjHandle (& rangeColumnsHandle);
  ClearObjHandle (& rangeRowsHandle);
    
   
  If (error<>
  ReportAppAutomationError (error);
    
  error return;
  }

• Capture (7510) and HP Scan: scan hp

  Hello

  I upgraded my PC from Vista to Win 10. I was using the software called "HP Scan" on my old computer and when scanning using the sheet feeder, all to support double-sided scanning, it would allow me to give my pages scanned from scanning side 1, then the software would intelligently put pages in order for the registration in PDF format.

  Now I have Windows 10 "HP Scan and capture" and it allows me to select "double-sided scanning", it allows me not to pages after side 1 was scanned and the end result is that if I want to scan multiple sheets on both sides, I need to make them one at a time, or I need to have all scans of setbacks at the end of the created PDF file meaning so the document is not in the correct logical order.

  Is there a way to get around this?

  Thank you

  John

  Hello

  Thanks for the comments.

  You should be able to use the wireless software.

  Have you installed the software features FULL?

  Is your printer a HP Photosmart HP Officejet 7510 7510?

  You can download the full software features for your printer?

  Use this wizard to help you:

  HP printer install wizard for Windows

  http://ftp.HP.com/pub/softlib/software13/COL50403/MP-150580-2/hppiw.exe

  Hope that helps.

• Why is my screen blurry and lines undulate on the sides? It also keeps the glitter!

  Why is my screen blurry and lines undulate on the sides? It also keeps the glitter!

  Is your very large monitor, like an old TV or flat, as perhaps a few inches thick?  If it is very deep (front to back), you have an old style monitor, and they need to be demagnetised every now and then. Look on the monitor for the menu button and navigate until you find an icon like a horseshoe with a bar slash through it (or like a magnet) and select it.  All wavy and colorful display for one minute and then went back to normal. Also, make sure that all the cables between the monitor and your computer are firmly connected at both ends, even if you have a thin screen.

  If you have a laptop, try to turn the screen and see if the blur changes.  If so, you might have a connector loose inside and may need to be considered at a repair shop. =(

  Best luck!

  (There is a small chance it is a result of burn; made me know if any of them help you, or that they do not apply.)

• I get a message saying that someone is trying to access my registry and to scan my computer. Is it a hoax?

  I got a message on my computer saying that someone was trying to access my registry on Vista Home Basic and to scan my computer. I scanned my computer completely and there is nothing abnormal. Why I would get a message like that?

  What the message says?

  If he asked for personal information such as password, username, etc.,

  It's a scam.

  If he suggested that let it with access remotely while it might fix your problem, etc.

  It's a scam.

  If he was asked to make his service for a price,

  It's a scam.

• Bad quality on HP Photosmart 5515 and 6510 scan

  Hello

  I just bought a Photosmart HP 6510 all-in-one printer/scanner after my Ditto 5515 broke down. They are good printers, but the quality of the scanned photos is ugly. If I scan a photo in the TIFF format, I expect to get an image uncompressed without artifacts, but these scanners do not clearly deliver that. Shure, they record the files .tif, but if I Zoom in on the image and look at it at 100% or more, I see that the image is full of JPEG compression artifacts.

  This means that the scanner will display only the highly compressed JPEG data, and then the scanning software saves a file .tif uncompressed containing the compressed JPEG image data!

  Here are links to two examples of images, that of my scanner Canon LIDE 20 of 10 years and that of the HP 6510:

  Canon: https://docs.google.com/file/d/0BzpnpCT3vxbdWmxaX3Q5WlhUdEE/edit?usp=sharing

  HP: https://docs.google.com/file/d/0BzpnpCT3vxbdT0xOcV9JSW1JTGM/edit?usp=sharing

  The scanner Canon gives a real no compressed .tif, then why can't the HP do the same? The two images are analyzed using native software of each scanner and with the default settings, at 600 dpi, on Windows XP.

  My main reason for the purchase of these boxes of HP is exellent on Linux support, which is my main OS. Scanning on Linux gives more or less the same result as under Windows. This leads me to believe that the problem is in the firmware in the scanners, and not in the Windows or Linux software.

  Someone at - he experiences the same thing? Anyone with a solution?

  Best regards

  Hans Petter Birkeland

  If you use the original SW provided with the 6510 from CD, note that it will scan JPG compressed for resolutions > = 600 dpi.  It was for performance reasons.     Scans with 300 dpi and lower are done without compression JPG.

  If you download the latest SW Web available for your device, we shipped a newer version of the drivers and the Scan software that allows this is configurable.    In the new version, by default, all scans are performed with the JPG compression to improve the speed/flow.   For almost all customers, this compression is not noticeable and the increase of the scanning speed is dramatic.   However, we allow customers to disable.  Under Advanced settings, you will find a checkbox for "optimize the quality of the Image" setting will force the scans to occur in Raw (uncompressed) mode regardless of the resolution.

  If you have original SW, I recommend upgrading to this version and try your scanner 600 dpi with this setting is enabled.

  Note that AIO devices typically 'Cook' the scans... like to apply default photo changes, sharpening, tonemaps, etc..    For software/drivers Windows, the default settings for sharpness, gamma, highlight and shadow are all hard-coded default values for general use which may or may not be suitable for all applications.    The only controls adjustable user in our existing Wndows software and drivers are the brightness and contrast.   It is possible that the software and drivers Linux can expose many of these features, but I'm not familiar with this platform.

  I do act this application to our team of engineers for future review... more fine tuning of all available parameters.

  Jeremy

• L7590 printer prints only pink squres and line (no black no words nothing?)

  Hi girls Guysn.

  Have a HP L7590 printer all-in-one.

  Problem is it prints only pink/red squares and lines, nothing else, won't prink black words nothing.

  Power turned power off and unplugged at the wall, reset, remove the devices and drivers, also changed all the wagons ink etc.

  Any ideas, it's about three years and printed on the 11 000 pages

  Concerning

  Marcus

  Hey Marcus,.

  How looks the impressions of the printer offline?

  Print the PQ Diagnostic page

  1. Check that the printer is loaded with unused white paper.

• Want to change the WordPad default values for font size and line spacing

  I use WordPad quite heavily because it is simple and fast.  But the new version of W - 7 seems to not allow you to change the default values for the font, size and line spacing.  The default values are not suitable for a large part of what I do and I'd like to find a way of quickly and easily, either make the changes permanent or change this to open with a single click of mouse or at most two.  Any suggestions?

  It is the "best" solution to workaround.  After you change your Default.rtf custom, simply move it to your system32 directory and add the "Default.rtf" at the end of the location of your target on the property sheet for your file WordPad.exe.

  Every time that you open its default location in the directory c:\program files\windows NT\Accessoires WordPad.exe, it defaults to now your Default.rtf custom.

• Incompatibility of printer Kodak 3250 reviews and cannot scan pictures

  Tite Originla: programs compatibility Application Applications App Apps game games Legacy Crash crashes Hang hangs

  I am running Windows 7 and a Kodak 3250 printer that was working fine until recently. I get a finding of incompatibility and cannot scan pictures.

  Hello

  · What is the exact error message that you receive with error code if any?

  1. I suggest you to run the printer Troubleshooter and check if it helps. Reference link: open the printer Troubleshooter: http://windows.microsoft.com/en-US/windows7/Open-the-Printer-troubleshooter

  2 remove the printer drivers and reinstall the drivers. Follow the steps below:

  a. click on start

  b. type cmd in the start search

  c. right-click on the option of cmd.exe and select run as administrator

  d. type: printui/s/T2

  e. opens the printer server properties page

  f. press CTRL + mouse click, and then select all the printer drivers you wish to uninstall

  g. Select Delete

  Links to install the drivers:

  KODAK all-in - One Printer Home Center software (including drivers) - WINDOWS operating systems: http://support.en.kodak.com/app/answers/detail/a_id/17138/selected/true

  KODAK ESP 3250 all-in - One Printer Firmware - WINDOWS operating systems: http://support.en.kodak.com/app/answers/detail/a_id/17438/related/1/selected/true