NEITHER 9205 multichannel devices

Hello

I use two 9205 materials nor supporter of tensions. When I connect one fo the features everything seems to be ok. When I conncet the second device, I can't read the correct value for the voltage. I had read that change the sampling frequency and the convert clock would help, but I don't know how to do this.

Can someone help me?

The module nor 9205 are connected to a device or cDaq-9172.

Concerning

Hi, I had read the message but I don't undesrstand how to change samplig rates and the clock to convert?

Do you know how to do this? I'm doing the modification in the VI suggestd in this message but returns an error.

Tahnks for your attention

Tags: NI Hardware

Similar Questions

  • NEITHER 9205

    Hello

    I have 3 questions autour of nor 9205.

    1 / I use 9205 to measure a voltage of 5 Volts, and there is a peak level of 15V (trig) under normal conditions of my .it signal. Now, I want to know if this pic can destroy my card because neither 9205 a +/-10V min max level.

    2 / How could I configure ni9205 caliber (10V, 5V 1V, 200mV) without fpga tools?

    3 / ni9205 has a minimum of +/-200 mV, I want to measure a millitension. What type of card you propose for this?

    Thank you

    Kind regards!

    Hello

    To answer your first question, there is a surge protection. (see this link: http://www.ni.com/pdf/manuals/374188d.pdf on page 19)

    Your module is not destroyed if you apply a voltage lower than 30 V for only the channel.

    To configure your module, you can use NO-DAQmx which is the driver for this card for Windows.

    What platform do you use with it?

    When you install NI-DAQmx, there are some examples that are intalled.

    The 9205 could be set up to measure the voltage whose range is +/-200 mv with precision of 0,174 mV. (sse this link: http://www.ni.com/pdf/manuals/374188d.pdf page 22)

    With this record, you are able to measure the tension between +/-200 mV with a precision of 0,174 mV.

    I think that you need not to anothere card unless you want better accuracy.

    Best regards

  • NEITHER 9205 in a task; error-200077

    I'm trying to set up a task to read all 16 channel differential on a NI 9205.

    I get an error-200077 when I get to add channel8 (from count to zero) to the task, almost as if the software

    It's an e-mail with asymmetric 16-8 differential channels, not 32/16 like in reality.

    Anyone, no matter what?

    Use AI0 - 7 and HAVE 15-23

    AI8 is the - side of AI0

  • NEITHER 9205 fpga digital output

    Hey Gang,

    Hardware people left me with having to toggle the output of the NI 9205 DO0.  I looked hard, but have not found anywhere where the PFIO and/or DO0 pin code feature is described.  Part I/O of the application is written using the mode of FPGA.  Of course, I would be able to control this bit of LabVIEW.

    All responses will be welcome!

    Thank you

    Roger

    Good,

    I'm embarrassed!

    I had inputs and outputs bass-ackward in my head.  I took a digital Voltmeter to pin.

    Everything is fine, except, perhaps, my brain!

    Roger

  • Using a multichannel device with programs of multiplication

    Hello

    I have two programs measurememt DAQmx Labview:

    1. a channel with microphone

    2. three channels or more with vibration sensors

    All programs use the Labview VI:

    DAQmx create channel, DAQmx beginning

    Read loop with DAQmx

    DAQmx Clear

    Everything is good parallel work in a single system, if two cards of the measure.

    Now, I don't have only a single 8 channels card 4472.

    I could use one microphone channel, the other for vibration sensors.

    Of course, with the same sampling rate.

    Is there a solution to capture the data of the card DAQ, one of the two programs?

    If not, what is a good solution to solve this problem, without complete rewrite both programs in a program?

    Possible a new DAQ measurement program to share data to other programs on the same computer:

    -with TCP servers for each channel or

    -with variable shared network or?

    Peter

    I think I need to change programs:

    Multichannel with an option to send channel data to a VI Server network queue, see example http://forums.ni.com/t5/LabVIEW/TCP-Listen-VI/m-p/1017592#M453829

    The other to receive the data from this queue instead of the use of DAQmx.

  • NEITHER 9205 always returns the noise from rail to rail.

    Hi all

    I'm completely stumped on this one. I went through the procedure of implementation of the NI 9205 module in my project. Setting the channel to the appropriate type. Placed the node IO in my FPGA code, read and all I get is noise from rail to rail, that is, whatever the measurement range is, I'm getting noise across the range. I ran it as a measure of CSR, as a measure differential, differential with COM updated wrt my diet, differential with COM Earth and the mass of the chassis connected to my powersupply ground.

    Rail to rail noise ringing bells for anyone?

    I checked with an oscilloscope that the appropriate signal is seen on the pins in all the configurations above. I even unplugged and plugged a 3 v battery through the pines and still noise from rail to rail get.

    Help!

    HM, I used the 9205 before, but didn't have never seen something like this. I am more fan of data buffering in a FIFO, rather than reading a control value, but still, you shouldn't see this kind of securities for a reason that I don't see. I had problems with the modules where something is messed up and randomly, the signal will drop out then go back (in fact, I am about to send an or because it is still under warranty, but it's in a portable box, so I think that he may have had problems with shock or something of the sort). I wish I had a good answer for you, but you seem you know what you're doing, so it could be one of those cases where there is a hardware problem.  You have any other module HAVE you can share and see if those working in this niche? You can try it in a different location to maybe see there is a connection from bad backplane? You can also check if your local rep OR has a loan that they can indulge for a day, just to see if another 9205 works. Usually, these are the steps I take when I think that there may be a hardware problem. Unfortunately, except that I don't have a lot of input for you.

  • NEITHER 9205 digital output configuration with DAQ Assist

    Hello

    I have two NI 9205 Analog Input Modules which I have configured to read from each of their 32 channels.  I used the DAQ Assistant help generate the vi which contains the task out - DAQmx event and also the DAQmx Read vi.

    I used the Wizard twice, once for each module 9205 and then put the playback functions in a sequence structure so that only read would be carried out at the same time.  It all works very well!

    Now, I want to add in the code to wait in a loop before all loop containing playback functions, so that the user can press the GUI to send a logic 1 to the unit under test, and after it is sent immediately starts collecting data.

    The DAQ Assistant Help does not recognize the module 9205 when I try to set up a task to write a digital output.  9205 a 1 digital output so why is the wizard does not recognize this?  I also tried to create a task manually, but I got stuck.

    Someone please help.  I can reach the source if needed, but I thought that the descriptions above were sufficient.

    Thank you

    Gary

    Hello

    You are right it shows a line in this user manual, and in fact, you have found an instance where an important piece of information was left out of the documentation. This digital output line is actually only available when you use a cRIO chassis. It will not work with the chassis for the acquisition of data compact 9172. Here is a knowledge base that explains it. I'll also go ahead and file a request for corrective measures so that this note be included in the next version of this manual. Thanks for the comments.

    Chris

  • Sync module NI 9205 with NOR-9234

    Hello

    I have a cDAQ-9178 chassis with 4 x accelerometers IEPE PCB 16 absorbent of NOR-9234 (DSA). I have a NOR-9205 I intend to use to acquire the power of 4 problems. The NI - 9234 s are synchronized through their extensions in a single task. I would add the NOR-9205 to the chassis and synchronize it with the NOR - 9234 s. I have the following questions:

    1. Calendar synchronization

    How to properly START and the NOR-9205 CLOCK synchronization with the NOR - 9234 s? PXI I export the master St DSA. WHICH device (OR-9234 or NOR-9205) should export WHICH signals to WHOM?

    2. even or parallel task

    Since I produce a TDMS file in its task of NOR - 9234, it would be nice if I could simply to ADD the OR-9205 to this task to develop this unique TDMS with extra 4 channels of the NOR-9205 file. Is this possible?

    Thanks in advance,

    Hi golubovski,

    > Are you saying my task of canal expansion can fire them OR - s and NEITHER-9205 9234 with its 32 channels of multuplexed HAVE? How to recognize which modules can be combined in this way convinient?

    Yes. With the cDAQ-9178, any set of AI modules can be included in the same task and in most cases that apply to the AO and DIO as well, but you cannot mix a, AO and DIO in the same spot. The NOR cDAQ-917 x manual goes into more details on what combinations of modules, the types of channels and the tasks are possible.

    > I am aware since I worked so far with the PXI - 4472 DSAS. How well can correlate between the NI 9234 - and the NI9205?

    Well, I wanted to make sure that you did not know that it is something that you'll probably need to take into account. On the top of my head, I don't know the answer to this question.

    > As far as I know, in which case I use dummy DAQ with the NOR - 9234 to offset 40 clock cycles I guess I'll need to separate the tasks - how to integrate viewers into a single stream of TDMS?

    If you use two separate tasks and you are using the built-in support of DAQmx for TDMS logging, then you will get flow TDMS separated for each task. Note that a dummy read will still record to the PDM file, then maybe it will not work in your case.

    If you use the TDMS API to write to the PDM file, you can do the preliminary processing of data before it is written in a single stream, but there is some trade-off between ease of use and efficiency: either you write data point floating in the file (easier but less effective), or you have to deal with scaling (most effective raw data (, but harder to do).

    Another approach is to put all the modules in the same task and compensate for the delay of the filter after reading the data from the PDM file.

    > Also, for fixed 3.2 µs I have to calculate how many cycles given the actual sampling frequency or is there another method?

    If you filter delay compensation by removing a whole number of data samples, then Yes. However, there are other methods of data processing that can compensate for a number that is not part of the sample clock periods. I don't have a recommendation, but maybe someone else does?

    Brad

  • All iOS Devices "allow access" but will be out of sync

    Hello

    I have a 2 Air iPad & iPhone 6s, using iTunes on Windows 10.

    I always sync my devices by USB. I have not synchronized each device in a few weeks. The two iOS devices running iOS 9.3.1.

    For some reason any when I plug in a device, under Windows it warns me that 'Apple iPad' (or iPhone) is plugged in (not his name), and then on my iPad/iPhone, it asks if I want to "allow access". Neither the source device list appears in iTunes and therefore cannot sync my devices.

    I have synced with this installation of iTunes on this computer many times before, so I'm not sure why this is happening now.
    I have deleted my iTunes twice lockdown folder and restarting computer & all my devices.

    Can anyone suggest a solution?

    Thank you!

    Ash

    Problem solved. The following steps are taken:

    Reinstalled the drivers:

    Plug in Device iOS

    Open Manager devices (search in the start menu)

    Portable devices - right click on the Apple iPhone and choose Update driver software.

    Go to C:\Program Files\Common Apple Mobile Device Support and choose the Drivers folder. Click OK.

    Click next to reinstall the driver pack.

    Synchronize now works as usual.

    Hope this helps anyone who is going to search for.

  • NEITHER 9212 - issues with sampling frequency, number of samples and size of buffer or slowness comes together with thermocouple module

    To begin with, I am very new to labview and unfortunately on that my first task is to build something rather complicated for a project that my company works. Fortunately it is especially followed rather than control critical processes.

    Currently, I have a cDAQ with modules, DI, AO, and TC.

    cDAQ-9133

    NEITHER 9472

    NEITHER 9421

    NEITHER 9263

    NEITHER 9205

    NEITHER 9212

    I'm currently running read-write for all 5 of these modules in parallel while loops and analog and digital inputs/outputs modules that all work as expected. Each loop requires 1 sample per channel through the wizard DAQmx etc for each module and I got can interact with all the asyncronosly inputs and outputs which at the moment is the goal. I can switch power switch for each module save memory, or if the need arrives later.

    My problem is that the module TC (NI 9212) when tilt on which allows the acquisition of sample 1 loop seems to take much, much longer to collect samples. I have played with different acquisition parameters and can seem to get a continuous flow of data when you use streaming samples, or even when specifying N-samples but I come in questions where the "application cannot catch up with the hardware.

    I tried to find an optimal number of samples/sampling, rate, etc I can get an update of temperature more than every 1 to 2 seconds, but if I set the number of samples that are high enough to apparently get a constant flow, what ends up happening waveform graphs seem to lag behind the actual data, and that's where I get errors. I only want 1 sample per channel per cycle anyway. Yet once, all the other modules in the cycle with less than 100ms delay between acquisitions but the module thermocouple ends up being 1-2 seconds. It's okay because in our application temperature should not rise/drop very quickly but its boring nonetheless.

    I have the acquisition set up for the same (NI 9212) thermocouple module was like my modules of analog and digital inputs (NI 9205 and NI 9421) take 1 sample every time the task is called so I'm having a hard time understand why do the same for the TC module introduced such a delay. Max sampling rate is supposed to be 95 samples/s/ch, so I guess that the delay must come from call the task over and over again in a loop.

    Synchronization and how you have configured the 9212?

    In the case of high resolution, it can reach 1.8 samples/s. see page 7 of the plug technique here for rates for the supported modes:

    http://www.NI.com/PDF/manuals/374389a.PDF

    -AK2DM

  • Sampling OR 9205 if rate not specified

    Hi all

    I have an application that requires the generation of a binary sequence (for that I use NO-9401). After each number is generated the back are connected to a demultiplexer, each output of the demux generates a voltage I need to acquire with a NEITHER-9205, i.e. after each number is generated, I have to acquire an analog voltage. This process must be very precise. To minimize errors, I take 10 readings of everyvoltage one generate an average. I did like on playback, but my question is the sampling frequency, that is - this determinant the sampling frequency, the time if takes LabVIEW to read the 1Chan analog DBL 1 Samp?

    I also came for a result like on playback 1, however even if the results are correct, start and stop the task each round is not time efficient for my application.

    I use a 9172 chassis.

    Thank you very much for your help

    Hi JosephM,

    Your first photo (Reading.PNG) is using synchronization on demand for the two tasks. This means that DAQmx no entry or exit anything until you call DAQmx Read or DAQmx Write and the timing is entirely controlled by when your VI calls these subVIs. Adding a delay to the loop for will increase the time between the analog input samples, but "timing" software on Windows has a significant amount of jitter (it may delay much longer that you have requested).

    Your second image (read 1.png) uses sample clock calendar instead of synchronization on demand for the analog input. This implies much more accurate analog synchronization because the analog input is synchronized to a sample clock that is generated in the material. However, the digital output is still software timed. You can reduce the time spent in the DAQmx Start on the task to HAVE by calling DAQmx task Control (Commit) out of the loop. This will cause DAQmx book and partially program AI material once instead of once per loop execution.

    Should you precise timing? If so, you must be material too timed the digital output. The cDAQ-9172 supports load/s digital correlated in slots 1-4, which is hardware timed digital i/o using a clock source external sample (or a sampling of another subsystem clock, as AI/SampleClock or Ctr0InternalOutput). To use it, you will need to generate a matrix or a form containing digital models, you want to output waveform and in this table or the waveform, you will control the timing by repeating samples. A few screws example that should you started: dig write metered DAQmx/Digital/generate values/Correlated and DAQmx/Digital/generate values/write dig Chan-Ext CLK.

    Note that the cDAQ-9172 has two internal counter on the chassis channels that are useful for generating clock for digital I/o correlated examples: / cDAQ1/_ctr0 and/cDAQ1/_ctr1. These appear in the channel physical control e/s if you right click and select «IO name filtering...» "and check the box"internal channels.

    If you synchronize your DIO directly to your HAVE, you may need to insert additional examples of and throw the first samples of AI in order to take account of the time that it takes your demux to settle. If you continue to use avoiding the, you may need to insert a break from software to account for the waiting time.

    Is the electric line (60 Hz or 50 Hz) noise a problem? The sample rate and the number of samples can affect how well your average eliminates electrical line noise. Plu signal advanced such as windowing can help.

    Brad

  • DAQmx does not recognize the NI 9213 TC module

    Hello

    I'm quite new to LabView and just tried to set up the system.

    We use a cRIO-9022 controller real time with a cRio 9114.

    DAQmx recognizes the real time controller, but not TC (NI 9213) module and all other modules

    (NEITHER 9205, 9421, 9472).

    Can't simulate these devices in DAQmx (V 9.0).

    Moreover, that meant exactly by time real target?

    Thanks for your help

    Patrick

    Hi Patrick,

    The cRIO chassis is programmed with LabVIEW FPGA and the pilot of RIO and is in fact not supported by DAQmx.

    For some more information, I suggest through Getting Started with CompactRIO and LabVIEW.

    Best regards

  • Compatibility with windows 64 bit OS

    Hi, we intend to upgrade our current computer, possibly to a multicore 64-bit with windows OS. Currently, we use C++ as a software platform on a 32-bit Windows XP for the following devices:

    PCI-6534

    PCI 6713

    PCI-6071E

    NEITHER 9205

    USB 6501

    Most of them use NIDAQmx as drivers of base level. These devices are compatible with OS (win 7) 64-bit?

    Thank you

    I have not checked all of your devices are covered, but you should start to look at here and here.

  • Atheros AR5001X PU3298U WLan works with Satellite 5100 503

    Recently, I found a free MINI PCI Slot in my laptop and ordered a WLAN via EBay card.
    Unfortunately plug into the slot and connect the antenna cables failed
    change one thing. Neither WinXP / Manager devices displays the map and not Linux / lspci.

    Bluetooth activation requires special software that writes some ACPI registers that
    is trivial under WinXP, but a little tricky using Linux - however Bluetooth works fine.
    But activate Bluetooth have no effect on the WLAN card either.

    I had hoped that the turn that little light orange on the left front on could activate all wireless
    adapter but it obviously active bluetooth device only.
    The card that I use: Atheros AR5001X + - PU3298U WLAN MINI-PCI card.

    This card not work with my satellite / does anyone know the correct map?
    Or should I activate it somehow?

    Thank you, Frank.

    Hello

    Your laptop is ready WLAN and it is just important to use a WLAN compatible card. Looking around on the net I found info card Toshiba Wireless Mini-pci (802 11b) - PA3171U-1MPC network card is compatible with your model of laptop.

    Check it out!

  • Satellite A205: Vista & BIOS does not recognize the CD/DVD drive

    After a crash of the sudden family Vista system premium on a Toshiba Satellite A205 the system does not recognize the DVD CD - RW drive. Neither in Explorer, Device Manager, nor BIOS.

    Laptop is only a few months old.
    Have you tried the Toshiba check system - it ignores DVD disk check.
    Tried Windows Update - does not help.
    Tried registry fix - does not help.

    Cannot use the CD to reinstall all drivers - because it is not recognized.
    The DVD drive LED is on. If the disk looks ok physically.

    Does anyone have an idea what to do?

    Very strange what s
    Try this:

    Access the BIOS and set the default settings and save the changes.
    If it doesn't help then I put t see any other possibilities for contact ASP in your country for a CD/DVD drive control and possibly a replacement

    You said that the notebook is only several months old so I assume that the warranty is still valid and that's why everything has to be done for free

    Good luck my friend

Maybe you are looking for

  • How do I rename the folder of bookmarks 'Unsorted Bookmarks '? or add a folder at this level?

    With the help of Windows8 Firefox EU euballot - 1.1.Try to rename the folder of bookmarks 'Unsorted Bookmarks'? or add a folder at this level?I tried the suggestions in the forum (ie. Shift ctrl B); access to the file through library; all no chance.

  • "slick economies was deleted automatically.

    I use Google Chrome and have deleted the extension several times in the browser. But whenever I have to wake up the computer or open Chrome after a reboot, I get a message at the top right 'slick savings is automatically eliminated, but it happens ev

  • Coverage on Satellite P100 problem

    The orange cover cracked on my P100 was repaired under warranty by toshiba. After about a week and a very prudent use more cracks appear exactly where they did before. My previous post on this topic has been edited since I mentioned lack of design.I'

  • Slow speeds E3200 use wired and wireless

    Hello I'm trying to understand why my E3200 is (for lack of a better word) 'throttling' my internet speed. I am registered for the 50Mbps data plan my ISP. When I plug my laptop directly to the modem cable (via LAN cable), I see near 50Mbps as intern

  • Office, web pages, all display 90 degrees (laterally) HELP!

    don't know what happened, but everything is at 90 degrees off display. Can move the taskbar, but another everythng is always on the side