NEITHER the pilots 6501 & 6008

Similar Questions

• Satellite L50 - B will get the support of the pilots to win 10?

  my version of this laptop:
  Intel i7-4510U
  6 GB OF RAM
  Intel HD4400 + AMD 7 260 m
  750 GB HDD
  Thank you

  Who knows... lets see what series of notebook will support Win 10.
  But as I'm not mistaken most of the pilots Win 8.1 should be accompanied by also winning 10

• Satellite A300-22W - cannot launch the pilot

  Hello all I need your help.

  I installed a new graphics driver on my A300-22W and now I can't start the pilot. I have instaled the 8.611 version. I tried to uninstall all ati drivers and I deleted all folders of the ITA, but it does not work. Unfortunatelly new driver won't :(
  Can someone help me with this problem and I don't want to use my recovery dvd because I don't wat to lost my data.

  Please help me and forgive me my English (I'm very bad at grammar)

  Hey Buddy,

  > now, I can't launch the pilot.
  What you mean with the launch pilot?
  Usually the display driver starts with Windows, it's the graphics card properly recognized in Device Manager?

  > I don't want to use my recovery dvd because I don't wat to lost my data.
  In this case make a backup, and buy an external HARD drive. They are cheap these days.

• installed no comm with the pilot program

  Hello

  I have developed a small program DAQ in LabView (2013) for a "quadrupole mass spectrometer (MS) Extrel" using the very nice company LabView driver provided.

  The mobile developer is a win7 x 64 system with LabView2013 Pro. The soft Extrel is installed, the portable computer can communicate with the instrument of Ms. The program works on the mobile developer of its VI, from the EXE version and I also did a version of the installer and it works too.

  The portable target is also win7 x 64 with no LabView installed. I have included the LabView2013 execution engine in the first version of my Installer, and I installed it on the target computer.

  When I run the program installed, it launches the native software from 'ExtrelMerlin' as it should be, but from that point to the structure of the event (see the sample driver: 'Panel_Tune Display.vi', 'ScanDataCluster': the value changes in the event structure) which should get the data (for example in every 2 sec) driver is not triggered , the program hangs, and when I go out there, it closes without error...

  I have some info about this driver from LV:

  • The pilot project LabVIEW uses event callback functions to retrieve information from the Automation Server COM Merlin. This feature is not available in the Base of the LabVIEW Development System. You need the complete development system LabVIEW to run this project.
  • The LabVIEW driver uses Merlin Automation COM Server (which will be installed and configured in the configuration of the installation of the software of automation of Merlin) to access data analysis and instrument control. A custom DLL (\Extrel MerlinLV\Public\Bin\ Extrel.LVDataAdapter.dll) is used by VI files to convert data COM to compatible data types LabVIEW structures.

  In the compilation of my installer options, I see that "Extrel.LVDataAdapter.dll" is registered in the dependencies. I wonder why my installed program can obtain data from the COM server on the laptop of developer (with the dev. environment LV 2013 Pro), but not on the laptop with the runtime target of...? I should explicitly include the dll in the build options? Given that the portable target only engine of execution installed?

  It would be wonderful if someone with experience could tell me where to find the source of the problem...

  Thank you much for the help!

  Here you can take a look at the official instr.lib driver of the MS:

  https://DL.dropboxusercontent.com/u/8148153/labview_Extrel_driver.zip

  I got it, the experianced bug is related to some subVIs depending on the environment in the LabView project, which came from the company:

  1. the LabView code begins to get data of spectrum at each scan time that after setting some parameters via LabView in the mass spectrometer software. I'm not in depth, why it works like this, but that's what I know.

  2. so I realized that when I raise an event, what should define a parameter in the native MS software via a chain drive macro (sending a string on MS software through the driver interface) is not it. I checked the format of the string, which is sent to the external software of LV, and I started hitting my head on the table...

  The programmer who developed the code did not have the double number--> regio of conversion of digital channel independent. Since the spectrometer of the native software only accepts the string macro with numbers command using the decimal point, the software just couldn't interpret it command as valid because the laptop targets had German Windows with ',' decimal mark... The laptop the developer had English settings, so he worked there.

  I'm lazy to correct all these errors in LabView code, so I just changed the brand to the decimal point '. ' in the mobile target and voala: everything works

  And I thought there is a very difficult bug, I have to deal with that

• New keyboard will not work. The pilot is supposed to automatically load.

  Try installing a keyboard iHome.  The pilot is supposed to load automatically, but it didn't.  Computer will not recognize the keyboard.  Is there a way to make the system recognizes the keyboard?

  Hello

  ·         What is the model number of the keyboard?

  ·         What operating system is installed on your system?

  ·         How you try to connect the keyboard (wired or wireless)?

  If you use IHome-K231MS then it is not compatible with Windows.

  Check out the link provided below for more information

  http://life-works.com/product_detail.asp?dept_id=100027&sub_dept=100038&product_id=100089

  Please come back with more information on the keyboard so that we can help you in a better way.

• 2710p - need Win7 OS of the pilot deployment pack - where can I download this?

  2710p - need Win7 OS of the pilot deployment pack - where can I download this?

  Not the driver download page or the "Softpaq download manager.

  Thank you.

  Driver HP Packs have been created for the generation of xx40/45 of professional laptops. Since the 2710p was before then there's therefore no HP Driver Pack for her.

• My laserjet 3050 doesn't scan with Mac Lion system. When will the pilot be available?

  My laserjet 3050 doesn't scan with Mac Lion system. When will the pilot be available?

  Thank you very much, it works, but all I had to do was remove the printer and run 10.5 installation. I was then able to scan through HP Director, without taking other measures.

  Best regards, David

• Windows Update driver Fresco Logic USB Hub rot caused the pilot to read device status: the drivers for this device are not installed. (Code 28).

  Windows Update driver Fresco Logic USB Hub rot caused the pilot to read device status: the drivers for this device are not installed. (Code 28). The Roll Back button is not active. Where can I get the previous driver that came with my system. ASUS N53S Windows 7. Thank you very much.

  Hello

  Thanks for posting in the Microsoft Community.

  I understand your annoyance that you cannot update the driver hub USB rot. Please follow the steps below to help you to solve the problem.

  I would like to inform you that a Code 28 error is caused by a driver missing for that piece of hardware.

  There are all sorts of reasons that a driver could not be installed for a device, but your troubleshooting the problem will be the same regardless of the root cause.

  • Remove or reconfigure newly installed unit.
  • Restore the version before your driver update.
  • Use system restore to undo recent changes in Device Manager.

  Step 1: Roll back the driver to the version before your update.

  If you are having problems with your computer or device after upgrading sound driver, you can restore to an earlier device driver. If you are having problems with your computer or device after upgrading sound driver, you can restore to an earlier device driver. If you are having problems with your computer or device after upgrading sound driver, you can restore to an earlier device driver. If you are having problems with your computer or device after upgrading sound driver, you can restore to an earlier device driver. Check out the link below to make back the driver:

  http://Windows.Microsoft.com/en-in/Windows/restore-driver-previous-version#1TC=Windows-7

  When Windows 7 starts up again, it will load with the device driver of this material that you had previously installed.

  I suggest you to uninstall the driver from hub to rot Fresco Logic USB Device Manager and install the most recent on the manufacturer's Web site.

  Tips for solving common driver problems:

  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-driver-problems

   

   

  Hope this information is useful. Feel free to get back to us for further questions or problems related to the Windows operating system.

  Thank you.

• Kodak Hero 9.1 and installed, to the point where the pilots are downloading, I get the error "operation not complΘtΘ 0x00003eb.

  I come from Kodak Hero 9.1 bought and installed, to the point where the pilots are downloading, I get the error "operation not complΘtΘ 0x00003eb" Kodak say it of to do with Windows, but how to get assistance, an idea (which seems to have started since my last automatic download for service pack 1, maybe irrelevant)

  Hello

   

  Thanks for asking!

  When you try to install the driver for Kodak Hero 9.1 you receive 0x00003eb. error code

   

  To help you better, we need more information.

   

  When you click on the dialog box, you receive information about the error?

  To work with the issue, I suggest you follow these steps:

  Method 1: Clean boot

   

  When the computer starts to boot, programs non-Microsoft will not be started and would avoid any interruption of their share.

  See the mentioned site:

  How to perform a clean boot for a problem in Windows Vista, Windows 7 or Windows 8

  http://support.Microsoft.com/kb/929135

  Note: once you are done with the boot, follow step 3 of section to set your computer to normal startup.

  Note: If in case, you are connected via a connection wireless, and then when you start the System Configuration utility to perform the clean boot, click Startup and Services tab one time and check wireless see corresponding section are checked (enabled).

  Method 2: File system (CFS) Scan Checker

  SFC scan will find all missing or incorrect system files and repairs them.

   

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  I hope this helps. If the problem persists, or if you have problems of Windows in the future, let us know and we would be happy to help you.

   

• Just upgraded to Windows 7 and my Dell All IN One Printer does not print. It is said that the pilot of the AIO 942 not found

  Just upgraded to Windows 7 and my Dell All IN One Printer does not print.  It is said that the pilot of the AIO 942 not found.

  Anyone where I can download this driver?

  See http://www.microsoft.com/windows/compatibility/Windows-7/en-us/Details.aspx?type=Hardware&p=Dell%20942%20Photo%20All-In-One%20Printer&v=Dell&uid=942STD&pf=0&pi=1&c=Printers%20%26%20Scanners&sc=Multifunction&os=32-bit.

  There are only drivers for Vista at http://www.dell.com/support/drivers/us/en/04/DriverDetails/DriverFileFormats?c=us&s=bsd&cs=04&l=en&DriverId=R151559.

  They are supposed to work if installed in compatibility mode. http://en.community.dell.com/support-forums/peripherals/f/3528/t/19319527.aspx.

• Generate a binary sequence with the NI USB-6008

  Hi all

  I'm new to LabView and I am trying to generate a binary sequence with a box NI USB-6008. The sequence, I'm currently generate is a counter of 5 bits, i.e. 00000 00001 00010, 00011... 11110, 11111 placing each bit in a different digital IO of the of the 6008 NOR, so that I can use the County as the bits of selection in a decoder/demux.

  I managed to simulate the binary sequence and produce a graphical interface, but I have not found how to generate the sequence of bits with the NI 6008.

  Totally, I'd appreciate any help you could provide. Thank you very much.

  Hi JosephM,

  Good Afternooon and I hope your well today.

  I just tested the code on a 6008 and also released the above code is very complex - I was for some reason any fixed on using Boolean tables.

  Please see the attached code, in LabVIEW 8.6.

  Mind you, I have configured the task as a channel for all lines. i.e. digital single I spent, is the task value should apply to all channels selected in the entry. So if you select only port0/Dev8/$line0 for example, the DAQmx driver will examine the LSB of the digital and work so $line0 must be true from the false. It will NOT update all other channels. So when I select line0:4 - it will update the first 5 lines (bits) in digital. As the code generates a number from 0-32 he emotional generates 00000 to 11111.

  

  I hope this finds you well and sorry for the first post!

• With the NI USB-6008 case error-200077

  I try to run the C program example with my NI USB-6008 data acquisition card. I am trying to run the example of "ContGen - ExtClk.c". I get the following error when I build the program:

  DAQmx error: the requested value is not supported for this property value. The value of the property may be invalid because it is in conflict with another property.

  Property: DAQmx_SampTimingType

  Asked the value: DAQmx_Val_SampClk

  You can select: DAQmx_Val_OnDemand

  Task name: _unnamedTask<0>

  State code:-200077

  End of the program, press the Enter key to exit

  Thanks for any help.

  Have you done a search for this error code? As you can see on the care for the 6008, the analog output is only software timed, so you can select calendar on request. Your real update rate will vary a little, and according to specifications, have a maximum of 150 s/s.

• Population of list for the NI USB-6008 channel

  Hello

  I use labview version 2011. I have worked with USB 6008 for two months, but I encountered an error constantly even if I restart or shutdown of the PC for a while. I connected to my channel 6008 AI0 asensor and DAQ Assistant is not populating the available analog channels. Please someone help. Since it worked fine for a month, but not today.

  History was end I solved my problem after seeing the "Error in the knowledge base" pecautions on the site of NOR. Now the help data acquisition work.

  But I wonder how MAX data are linked with these DAQ contest. Some can clear me how MAX is related with all these functions of time real Labview.

  By the way, I'm using labview for two months.

  Thank you very much.

• Consistency of the NI USB-6008 device multiple numbering on several computers

  I have some equipment that we built that contains 2 units of acquisition of data NI USB-6008 to test the product. The test software is written in C++ with NI DAQmx. Everything works fine, except that when plug us the test on another PC, the two units DAQ hardware get their reverse numbering system. This means that what was 'Dev1 ai0"on one machine becomes ' Dev2/ai0' on the second machine and vice versa. We have only two machines, we are working on – is it possible to configure the hardware to enumerate identically on both machines? Or do we need to identify the two Renault by any other method?

  Thank you

  Colby

  What happens to Colby,

  Welcome to the forums and thanks for your question.  There are two different ways that you can ensure that you always reference the same camera.  The devices list in your system in the order that they were added, so the first way would be to always plug in the same order.  This isn't really the most reliable way to do things, so you can use the nodes property DAQmx.

  Now, I hope you will forgive my text based on coding is terrible, but the functions you need are DAQmxGetSysDevNames() and DAQmxGetDevSerialNum().  I'll leave the coding to you, but the Names property will turn all of the devices in your system.  You can then pass these and get the serial number of the device that will never change.

  For LabVIEW users who come on this post, here is what your code will look like:
  

  You will want to be aware that this second approach will not work if you have an OEM application where all devices that you deploy will have a different serial number.  I hope this helps.

• set the duration for the nor 6501 to control relay

  Hi all

  I made great progress thanks to your help. Now, I know how to control the relay using NI 6501.

  Furthermore, I try to put in place a period of time (after two hours) and leave-6501 OR turn on the relay.

  What kind of example I can refer to?

  When pressure data are weak to 1mtorr, then turn on the relay is another control.

  If there are some I can refer to similar examples, it will be useful for me to programming

  Thank you