Nero 7 on Qosmio F30?

Hello world

Does anyone has installed Nero 7 on a Qosmio (F30)? It interferes with the pre-installed software?

Thank you

Hello

I n t Qosmio but a Satellite phone and I installed Nero 6.x on my laptop and everything works fine.
I put t think you will have problems to install or use this wonderful tool.

Tags: Toshiba

Similar Questions

  • Qosmio F30-112 from an analog TV Tuner

    Hello
    I have 112 QOSMIO F-30.
    I can't watch TV DVB - T as in Slovkia has no signal.

    But there's also a tuner 'analog hybrid', this means that I can connect my Qosmio classic antenna/antena (analog TV) and watch air clasical hollow, or not? How is it?

    If I choose in the NERO 7 premium antenna Jack, he is not able to find any program. What should I do? My Qosmio is able to receive the analog signal?
    Please help, y at - it another useful software, except WMC?

    .. THX

    Hello

    AFAIK the Qosmio F30-112 supports a DVB-T/hybrid tuner and it should be possible to receive regular analog TV channels.
    You must connect the laptop to the antenna via a cable.

    The laptop has installed WinXP MCE, so you should use the media center to watch TV!

  • Qosmio F30-112: cooling fan runs very fast

    Hello

    I want someone ask them, my computer laptop qosmio F30 - 112 recently whenever I start my computer, I heard that the cooling fan runs very fast (I mean) it wasn't stop differently than before his execution smooth only I heard when I play games but not continuous, then after that my computer now running slow.

    Can someone help me what im going to do?

    Thanks: rtmasagca

    Hello

    F30 is a little older series laptop I think about 3 years or more... you cleaned the cooling modules in the meantime?
    I think there is a lot of dust and debris inside the laptop and I think that keeps air from traffic and therefore fans run faster.
    Try the compressed air jet that should help to remove dust and debris.

    Good luck

  • Qosmio F30-147 - no sound after update driver

    Hello

    you I ve a problem with my qosmio f30-147 running with the 32-bit version of windows 7.

    Recently, I wanted to upgrade my Codec driver SigmaTel HD audio a former pilot XP to a latest driver I ve Vista that is on the internet. But after the reboot, there is no noise at all and my windows tells me that couldn t he read the driver for SigmaTel. Then I reinstalled the new driver and installed again the old XP driver (again found on the internet). SAME PROBLEM! Now it s not even working with the old driver... someone knows what evil? I have can´t NOTHING on google or elsewhere, West found no official Site of Sigmatel and there is no sigmatel drivers on the toshiba site. Please help me I need my sound as quickly as possible without having to reinstall the system.

    hosts of the Germany, sry for my English untrained! Help, please!

    Hey,.

    This strange but may s I ask you why you updated audio driver? Have you had problems with this older version?

    Anyway, in your case I would try to restore the system to a point. Usually this should restore the previous version of the driver, and the noise should start working again.

    Check this box!

  • Re: Problem with Qosmio F30-140 VGA card

    Hi all

    My Qosmio F30 suddenly developed a green lines/pixels on the screen. The same problem exists even before logining windows.
    The card (nvidia go 7600) video under the device manager has a yellow triangle with an exclamation mark inside. I tried reinstalling the VGA driver, but nothing has changed.
    I think it is a hardware problem (GPU), but I don't know if there is anyway to fix it. Please notify.

    It's certainly the hardware problem. What you can do to confirm this is to connect external monitor to your laptop to see if the same thing will happen. If so, the GPU is defective and if not display's troublemaker.

    What you can do to solve this problem? Not much. Material exchange is your only solution.

  • Qosmio F30-112 - small strips and dots on the screen

    Hello

    I need help, my laptop (Qosmio F30 - 112) have a problem.
    When I started it scratch on the screen and flashes.
    Then if I try to reboot it works, but not normal; still have a small scratches and dots on the screen.
    I checked it on the Device Manager NVIDIA GForce with a yellow mark.
    I tried to uninstall it but nothings happened.

    Please some body help me what to do in this case?

    And if you have to replace the VGA CARD, is it possible to upgrade? and what (NVIDIAGforce) parts are compatible for my laptop (RAM memory upgraded 4 GB 320 GB hard drive and windows 7 Home premium)

    Thank you
    rtmasagca

    Hello

    Have you tried to install or update the display driver?
    Please check this because the yellow exclamation mark in Device Manager may mean that the display driver is missing and so the graphics card does not work properly.

    Otherwise, it could be a GPU problem.
    This can be tested easily; connect an external monitor and check if the same stripes, points would be visible on the monitor that is eternal.

    If Yes, then it s certainly a GPU problem.
    In this case, only the replacement of the motherboard might help.
    Also, upgrade is not possible.

  • Qosmio F30-112 drivers for linux

    Hello

    I need help. I have a Qosmio F30 - 112 and I have linux on my pc. I need drivers for the graphics card.

    Thank you

    Hello

    Sorry, mate, but Linux not taken in charge by Toshiba officially. This means you need to do your own search in Google or on other forums asking if someone has solved a problem of graphics card driver.

  • Qosmio F30 - file missing or corrupt

    Please can someone help.
    Have a message from work Toshiba Qosmio F30 - 117 abruptly stopped in SafeMode it suggests following file missing or corrupt Windows\sytem32\config\system.
    Screen consists of thick blue & black lines with the projection of windows logon.

    Then you can only boot into safe mode gives above reading and turns off also suggests windows not EQUIPPED tried to recharge but is not possible. I know its old but its my friend suggestions have been people look £30 here £30 but no solutions only that it could be the hard drive get off and make £150, but it might not work.

    I'm of average intelligence old I could fix it by replaceing suggested parts of help please or thank you for suggested reading of John.

    Hello

    What operating system is currently installed?

    If Windows doesn't start over there is not much you can do and I recommend to reinstall Windows from the Toshiba recovery disc. Such a new and clean facility can help power Windows and the new installed Windows system will work also a bit faster and more stable if it s advisable to reinstall at any time (1-2 years).

    So take the Toshiba Recovery disk and follow the instructions on the screen to reinstall Windows.

  • Qosmio F30-112 - no driver to download

    Hello
    Why drivers are no longer available for qosmio f30-112?

    Thank you.

    Have you checked option ARCHIVE too?
    You can find it in the product type.

    Open your eyes. ;)

  • Qosmio F30-112 - drive is not assigned a drive letter

    Hello

    Once again I need your help. My drive UJ 846-C of MODEL Qosmio F30-112 CD/DVD can not read. I brought it to the center of Toshiba, that they said its necessary to replace, but they told me that it will cost US $266. So I decided to buy it at the other store. I found the MODEL UJ-875 after I installed the computer hardware installed successfully, my problem is when I try to insert the CD once a few second CD comes out.

    I try to diagnouse with Fix it messege was THE DRIVE IS NOT ASSIGNED A LETTER (MAST * a DVD - R UJ - 875 ATA DEVICE
    The drive is not accessible without a drive letter assigned.

    Can someone help me what to do or what I have to return the unit? is this compatible or not?

    PS by the way my computer has been upgraded to Windows 7 Home premium

    Thank you
    rtmasagca

    Hey,.

    Wait a moment, Matt: do you have upgraded to Windows 7 with the new CD/DVD drive or do you have it before you exchanged the drive?

    You get this message from Windows?

    If so, it seems that it s not installed correctly and you should try removing the upper and lower filters in the registry:
    http://support.Microsoft.com/kb/314060

  • Qosmio F30 - remote does not work after recovery

    I replaced the HARD drive in my qosmio F30 and restore windows XP MCE from the DVD of restoration, but the remote doesn't work anymore under windows. However, it always works for the qosmio player. Help, please?

    Hey Kevin,

    You can download all drivers here if you have a European model:
    http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

    Your model is a bit more if you need to find in * Archives *:
    * Archive * > Qosmio > Qosmio F Series > Qosmio F30

    Check this box!

  • Features red and green Qosmio F30-117 - display problems-

    Hello

    I have a qosmio F30-117, and until recently, I was thrilled with everything about it.

    Then, mid session, graphics started to deteriorate, which fixed a reboot.

    Then a few days later, he did it again and this time when I rebooted it came with a display corrupted, a lot of aa in all directions then red and green lines everywhere.

    Managed to get by selecting safe mode with network and got a desktop computer but still with red and green lines everywhere.

    Now its got worse again, when I start the screen of the laptop itself is empty, becomes something because it is not completely black as if it was when its engine turned off, but his Blanck.

    To check I have connected to an external monitor and managed to get again in safe mode with network, but still very bad and always red and green lines everywhere.

    I started to take a ride on the old good www and there are many posters and articles with problems and many mentioning the lines red and green etc...
    so I'm not alone, but no one seems to know exactly what it is.

    Some have mentioned the grateful Toshiba this as a problem and make even if out of warranty repairs.
    Thus, ideas, advice and does anyone know if Tosh have agreed the problem and offer any help?

    Thanks in advance

    Hello

    In my opinion, this looks like a problem of graphics card GPU eventually started to malfunction, and in this case to replace the motherboard.

    > Some mentioned Toshiba grateful that as a problem and make even if out of warranty repairs.
    Thus, ideas, advice and does anyone know if Tosh have agreed the problem and offer any help?

    It doesn't have to be dull I ve also found this update from Toshiba product support page, but there is nothing listed on the problems of F30
    http://EU.computers.Toshiba-Europe.com/innovation/generic/PRODUCT_UPDATE_SUPPORT

    What to say. Seems only a technician ASP might solve your problem, but replacing motherboard is a costly affair so it s your own decision to want to do

    In any case... good luck...

  • Qosmio F30-141 - how to change the RAID to IDA in the BIOS?

    Hello world! I own computer laptop Qosmio F30-141. The problem is that I don't like vassive RAID. Please, could you tell me step by step how to change the RAID to IDA in the BIOS. Thank you in advance.

    Why do you think that this can be changed?
    Maybe you can disable the RAID and be happy without him.

    Have you checked s manuals? It is described how RAID works on Qosmio F30.

  • Qosmio F30 starts with blue stripes during Vista boot screen

    My Qosmio F30-114 runs for years without problem with Vista Ultimate.

    In recent days, there is a huge problem.

    The Qosmio starts with blue stripes during vista boot screen.

    So I deleted the driver for the graphics card and used the standard vga driver for the card. the wizard of material found one driver on the system.
    For a brief moment, I was very lucky.

    After a reboot, there was a blue screen. After the next restard again once the driver to the standard vga card.

    What can I do?

    The download section of toshiba has no drivers for graphics card.
    And really... I wonder - how it works every year without problems...

    Someone at - it a solution?

    thanx

    toshibalover ;-)

    Hello!

    First you have this problem on an external monitor too or only on the screen internal? Maybe it s is not a graphics card problem so check it with an external monitor.

    I checked the Web from Toshiba site and I can find drivers for the Qosmio F30:
    http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

    Good bye

  • Qosmio F30: installed new drivers now no sound.

    I have a Qosmio F30 (PQF32), have just started to use Driver Detective to update the drivers, problem is now I have no sound.
    Control Panel says no. Audio Device, and more when I boot it says new hardware found PCI but can not find the driver.
    Would appreciate any help to restore the sound on my PC... "Not impressed with Driver Detective".

    Hello

    Why you n t back to the first version of driver sound?

    You could do this driver download sound manually from the European pilot of Toshiba page.

    Then delete the old driver from the Device Manager (uninstall) and after rebooting again install the new downloaded driver.

    Usually, it should work!

Maybe you are looking for

  • Facebook notifications

    Hello I got a problem for the last 3 weeks (approximately) and he's still here. My problem is with Facebook notifications, before this problem I was getting a memory on the notification in the pop up banner, but now it shows just ("you have a new mes

  • change the volume of individual securities

    Good then it's maybe a stupid question, but for the life of me I can't figure out how to change the volume on a track. I can change the volume of the whole project, but I'm looking to do a specific track a bit softer.

  • Where LV 2009/2010/2011 does not save the last used folder?

    Hello, where LV2009/LV2010/LV2011 saves the last used folder? I need all three versions on my development machine, and when I open a project, for example, the folder LV2010 is 'data e:\LabVIEW 2010\Projects\Project to\ ". Then I closed LV2010 and ope

  • Sansa Clip CODEC used in original Firmware

    I want to know if sansa firmware using the mp3 decoder under license from Fraunhofer IIS, such as listed in the manual booklet. is this true? even with the iPod which using the same decoder...

  • HP OfficeJet Pro L7590 all-in: Solution Center does not

    We have three computers running Windows 10.  On two of them, the Solution Center will not load.  Click on the desktop icon and the image of the Cluster Solution flashes briefly and disappeared.  We use Windows 10 for several months now and have used