Net-broadcast event window 2.0.0 is 'end now' when I turn off the computer

Similar Questions

• Windows Vista Home Premium does not start when I turn on the computer. Ctrl alt del does not work

  Windows Vista premium edition hung up in judgment and now I can't get windows to boot at all.  I just get a blue screen that says Windows Vista.  What should do?

  Hello

  You are able to access the menu start pressing F8 as soon as the initial POST ends and before Windows starts to load? If so, try the last known good configuration. Otherwise, follow the steps here to load the recovery environment: http://support.microsoft.com/kb/927525 and then run rstrui.exe to load the system restore. Good luck, Rick Rogers, aka "Crazy" - Microsoft MVP http://mvp.support.microsoft.com Windows help - www.rickrogers.org

• I use Windows XP Home Edition. It takes awhile to start when I turn on the computer. How can I speed up this process?

  I use windows XP Home Edition. It takes awhile to start when I turn on the computer. How can I speed up this process?

  original title: slow start
  • Faster processor.
  • Fastest hard drive.
  • Faster or more RAM/memory.
  • Less things loading at startup.
  • Appropriate and the most recent hardware device drivers.

  In XP, you can cleanup and optimize it in some way, by using the following tips:

  Search for malware:

  Download, install, execute, update and perform analyses complete system with the two following applications:

  • MalwareBytes (FREE)
  • SuperAntiSpyware (FREE)

  Remove anything they find.  Reboot when necessary.  (You can uninstall one or both when finished.)

  Search online with eSet Online Scanner.

  The less you have to run all the time, most things you want to run will perform:

  Use Autoruns to understand this all starts when your computer's / when you log in.  Look for whatever it is you do not know using Google (or ask here.)  You can hopefully figure out if there are things from when your computer does (or connect) you don't not need and then configure them (through their own built-in mechanisms is the preferred method) so they do not - start using your resources without reason.

  You can download and use Process Explorer to see exactly what is taking your time processor/CPU and memory.  This can help you to identify applications that you might want to consider alternatives for and get rid of all together.

  Do a house cleaning and the dust of this hard drive:

  You can free up disk space (will also help get rid of the things that you do not use) through the following steps:

  Windows XP should take between 4.5 and 9 GB * with * an Office suite, editing Photo software, alternative Internet browser (s), various Internet plugins and a host of other things installed.

  If you are comfortable with the stability of your system, you can delete the uninstall of patches which has installed Windows XP...
  http://www3.TELUS.NET/dandemar/spack.htm
  (Especially of interest here - #4)
  (Variant: http://www.dougknox.com/xp/utils/xp_hotfix_backup.htm )

  You can run disk - integrated into Windows XP - cleanup to erase everything except your last restore point and yet more 'free '... files cleaning

  How to use disk cleanup
  http://support.Microsoft.com/kb/310312

  You can disable hibernation if it is enabled and you do not...

  When you Hibernate your computer, Windows saves the contents of the system memory in the hiberfil.sys file. As a result, the size of the hiberfil.sys file will always be equal to the amount of physical memory in your system. If you don't use the Hibernate feature and want to reclaim the space used by Windows for the hiberfil.sys file, perform the following steps:

  -Start the Control Panel Power Options applet (go to start, settings, Control Panel, and then click Power Options).
  -Select the Hibernate tab, uncheck "Activate the hibernation", and then click OK. Although you might think otherwise, selecting never under "Hibernate" option on the power management tab does not delete the hiberfil.sys file.
  -Windows remove the "Hibernate" option on the power management tab and delete the hiberfil.sys file.

  You can control the amount of space your system restore can use...

  1. Click Start, right click my computer and then click Properties.
  2. click on the System Restore tab.
  3. highlight one of your readers (or C: If you only) and click on the button "settings".
  4 change the percentage of disk space you want to allow... I suggest moving the slider until you have about 1 GB (1024 MB or close to that...)
  5. click on OK. Then click OK again.

  You can control the amount of space used may or may not temporary Internet files...

  Empty the temporary Internet files and reduce the size, that it stores a size between 64 MB and 128 MB...

  -Open a copy of Microsoft Internet Explorer.
  -Select TOOLS - Internet Options.
  -On the general tab in the section 'Temporary Internet files', follow these steps:
  -Click on 'Delete the Cookies' (click OK)
  -Click on "Settings" and change the "amount of disk space to use: ' something between 64 MB and 128 MB. (There may be many more now.)
  -Click OK.
  -Click on 'Delete files', then select "Delete all offline content" (the box), and then click OK. (If you had a LOT, it can take 2 to 10 minutes or more).
  -Once it's done, click OK, close Internet Explorer, open Internet Explorer.

  You can use an application that scans your system for the log files and temporary files and use it to get rid of those who:

  CCleaner (free!)
  http://www.CCleaner.com/
  (just disk cleanup - do not play with the part of the registry for the moment)

  Other ways to free up space...

  SequoiaView
  http://www.win.Tue.nl/SequoiaView/

  JDiskReport
  http://www.jgoodies.com/freeware/JDiskReport/index.html

  Those who can help you discover visually where all space is used.  Then, you can determine what to do.

  After that - you want to check any physical errors and fix everything for efficient access"

  CHKDSK
  How to scan your disks for errors* will take time and a reboot.

  Defragment
  How to defragment your hard drives* will take time

  Cleaning the components of update on your Windows XP computer

  While probably not 100% necessary-, it is probably a good idea at this time to ensure that you continue to get the updates you need.  This will help you ensure that your system update is ready to do it for you.

  Download and run the MSRT tool manually:
  http://www.Microsoft.com/security/malwareremove/default.mspx
  (Ignore the details and download the tool to download and save to your desktop, run it.)

  Reset.

  Download/install the latest program Windows installation (for your operating system):
  (Windows XP 32-bit: WindowsXP-KB942288-v3 - x 86 .exe )
  (Download and save it to your desktop, run it.)

  Reset.

  and...

  Download the latest version of Windows Update (x 86) agent here:
  http://go.Microsoft.com/fwlink/?LinkId=91237
  ... and save it to the root of your C:\ drive. After you register on the root of the C:\ drive, follow these steps:

  Close all Internet Explorer Windows and other applications.

  AutoScan--> RUN and type:
  %SystemDrive%\windowsupdateagent30-x86.exe /WUFORCE
  --> Click OK.

  (If asked, select 'Run'). --> Click on NEXT--> select 'I agree' and click NEXT--> where he completed the installation, click "Finish"...

  Reset.

  Now reset your Windows with this FixIt components update (you * NOT * use the aggressive version):
  How to reset the Windows Update components?

  Reset.

  Now that your system is generally free of malicious software (assuming you have an AntiVirus application), you've cleaned the "additional applications" that could be running and picking up your precious memory and the processor, you have authorized out of valuable and makes disk space as there are no problems with the drive itself and your Windows Update components are up-to-date and should work fine - there is another thing you pouvez wish to make:

  Get and install the hardware device last drivers for your system hardware/system manufacturers support and/or download web site.

  If you want, come back and let us know a bit more information on your system - particularly the brand / model of the system, you have - and maybe someone here can guide you to the place s x of law to this end.  This isn't 100% necessary - but I'd be willing to bet that you would gain some performance and features in making this part.

• When I turn on the computer, I get this message - COM + Event System has stopped working. How can I activate this return?

  I had virus protection total defence installed. This occurred immediately after.

  Hello

  Thanks for your answer to my question. I was about to start step 2, by performing a boot minimum when a message pops up informing that 2 programs were slowing down my computer and also to stop because they were also running. Ironically, these programs I've ever used has appeared on my computer advertising protection against viruses and to speed up the computer.

  I did not purchase the license if it comes to start up all the 3 or 4 days telling me that my computer is slow.

  I uninstalled both programs, which I won't mention for obvious reasons and the event system Com + message did not return after the computer has restarted 3 times. Apparently, the problem has been resolved, but I will continue to have oversight. If the problem returns I'll restart and inform you about the results.  Thanks again for your expertise. guavaridgemb

  Thanks for posting your question in the Microsoft Community.

  I understand that when you turn on the computer, you get an error message indicating that COM + has event system stopped working. Correct me if I'm wrong.

  I imagine the inconvenience that you are experiencing. I will certainly help the question of fixing.

  Please follow the steps and check the question below:

  Step 1:

  Check the event viewer for the logs of error from the links below.

  Open Event Viewer:

  http://Windows.Microsoft.com/en-us/Windows-Vista/open-Event-Viewer

  What are the information in event logs? (Event Viewer):

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-information-appears-in-event-logs-Event-Viewer

   

   

  Step 2:

   

  You need to perform a clean boot to prevent any third party conflicting application from interfering with your computer.

  To put the computer in a clean boot state, you must follow the steps in the article mentioned below and check with the question.

   

   

  How to perform a clean boot for a problem in Windows Vista, Windows 7 or Windows 8:
  http://support.Microsoft.com/kb/929135

  Note: You must follow step 3 of the article mentioned above to recover your computer to a Normal startup after you complete all the steps.

   

  Step 3:

   

  Scan your computer by using the Microsoft Safety Scanner by clicking Download now to check if there is no virus infected:

  http://www.microsoftsafetyscanner.com/

   

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

   

   

  Your response is very important for us to ensure a proper resolution. Please get back to us with the information above to help you accordingly.

   

• Why Windows Firewall always stops when I turn on the computer - even if she did before? How can I keep it on recommended setting when I shut down the computer?

  I always change the tuning parameters recommended on Windows Firewall, when I turn on the computer, otherwise it reads in red writing "Windows Firewall does not protect your computer." The network location is the Public network.

  Hello
  If you are having problems turning on Windows Firewall, follow the instructions on this page: http://support.microsoft.com/mats/windows_firewall_diagnostic/
  Here are the instructions for error messages: error 0 x 80070424 or error of 0x8007042c
  I hope this helps you.
  Brian

• I have just re installed Windows XP. Windows installed after three attempts. When I turn on the computer there are three choices of Windows XP. Only the first works how to remove the other two?

  I have just re installed Windows XP. Windows installed after three attempts. When I turn on the computer there are three choices of Windows XP. Only the first works how to remove the other two?

  I have a hard drive. At least two partitions. C: 74.7 GB with 63.3 freespace
  D: 74.2 GB with 70.6 freespace
  These are my original specifications of the hard drive: 160 GB (7200 RPM) SERIAL ATA HARD DRIVE WI
  So I suspect there are at least one or more partitions hidden leaving 11.1 GB for hidden partitions!
  Windows is present on both drives C: & D:. In the directory windows on C:, the oldest entry is 19.12.12, 21.43 last 21.12.12, 22.50
  The first entry in the directory windows on D: is 19.12.12, 18.42 the last 21.12.12, 22.40
  I hope that makes sense to someone, any help gratefully received!

  As long as you have verified you dΘmarrez done on the c: / partition, Yes, you can reformat the drive D: / partition using Windows 'disk management '.

  J W Stuart: http://www.pagestart.com

• start-up problems: when you turn on the computer, it goes through all the trunk starts to load windows xp then starts again again and again

  When you turn on the computer, it goes through all the departures start loading windows xp then again again and again...

  Hi Keryn_Jansen,

  1. did you of recent changes on the computer?

  2. you receive an error message?

  3 when was the last time it was working fine?

  Check if you can start the computer in safe mode or from the last good known Configuration.

  Advanced Troubleshooting for General startup problems in Windows XP

  http://support.Microsoft.com/kb/308041

  How to fix a computer that does not start

  http://Windows.Microsoft.com/en-us/Windows-XP/help/Setup/how-to-fix-computer-that-will-not-start

• When I turn on the computer, the screen indicates "a problem has been detected and windows has shut down to prevent damage to your computer.

  Original title: when I turn on the computer.

  the screen shows "a problem has been detected and windows has shut down to avoid damaging your computor.

  Hi Cjdaniello,

  ·         Did you do changes on the computer before the show?

  Follow the suggestions below for a possible solution:

  Step 1: Start in safe mode and check if the problem persists.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Step 2: If the problem does not occur in safe mode, you can put your system to boot (in normal mode) to solve the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  I hope this helps.

• Updated windows HP 2000 error failed revertong configuration changes do not turn off the computer

  This computer is my friend.  I don't know what she does for her.  I fixed it before, but it worked one for hours and the same message is still there.

  "HP 2000 failed configuration error windows update revertong changes do not turn off the computer"

  Can someone help me please?

  I forgot too say what Windows 8.

  Hi @Margaret_62 ,

  Welcome to the HP Forums!

  It's a great place to find answers.
  You have the best experience in the HP forum, I would like to draw your attention to the Guide of the HP Forums Learn how Post and more

  I understand that your friends laptop HP 2000 is blocked on "default configuration of the Windows updates. Restoration of the changes. Do not turn off your computer"and worked for hours.

  First of all, I would like to try a hard reset. Performing a Hard Reset or forced Reset.

  If the problem persists here are some links that may help.

  "Configuration of the Windows updates failed. Restoration of the changes. Do not turn off your computer"error when you try to install Windows updates (from support.microsoft.com)

  Computer won't start (Windows 7, Vista, XP)

  If this is not resolved so, you can try a Refresh Your PC to solve problems (Windows 8).

  This will reinstall Windows, but does not affect your personal files.

  If you need further assistance, please provide your exact model of 2000 HP notebook and the result of the resolution of the problems.

  How can I find my model number or product number?

• I reinstalled windows vista, and when I did I must have erased the initial password when you turn on the computer. I was wondering how can I configure the windows logon password?

  I reinstalled windows vista, and when I did I must have erased the initial password when you turn on the computer. I was wondering how can I configure the windows logon password?

  http://pcsupport.about.com/od/windowsvista/HT/nvistapassword.htm

  Info on the link above will help you.

  http://au.Dummies.com/how-to/content/set-up-passwords-in-Windows-Vista.html

  More info on including a password reset disc info.

  See you soon. Mick Murphy - Microsoft partner

• Turn off the computer during the upgrade to windows...

  KB3097989 - guard trying (and failing) to install.

  Latest install ok that I didn't not turn off the computer.

  I can KB3097989 to install or lose it somehow?

  Go to uninstall a program

  Click with the right button on Microsoft Net framework which ever version view you and use uninstall or change.

  Use the Debug program.

• I have already installed creative cloud and illustrator (trial) but when I turn on the computer and restart windows, it fails with error code 16 and need me to remove the program, and reinstall.

  I have already installed creative cloud and illustrator (trial) but when I turn on the computer and restart windows, it fails with error code 16 and need me to remove the program, and reinstall.

  Need help.

  Hello

  Please see the link below.

  Configuration error. CC, CS

  Hope this will help you.

  Kind regards

  Hervé Khare

• Problem: When I turn on the computer, windows setup box appears and is installing a file

  After getting the "preparing to install" message, another message comes up saying "Please wait while windows configures roxio media manager.

  Then another message comes up saying "gathering required information".
  "The feature you are trying to use is on a network unavailable resource."

  "Click OK to try again or enter a different path to the folder containing the installation package 'Roxio Media Manager. MSI' area points to the following path C:\Documents and Settings\Jeffrey Brown\Application is In Motion. BlackBerry\Updates\6852A378-7780-4e80-B65-343C8D2C36AE\SR_MM\

  I have the Blackberry desktop manager installed on my computer and I also got a message saying there were some updates, but I was never able to download updates, if there are.

  How can I get rid of this process that appears everytime I turn on the computer?

  We had the same questions and the same messages.  Whenever you should cancel the installation, he returned again and again and much slowed down the system.  I canceled the installation of Roxio (but he kept coming back and coming back, he finally trying to cancel) and then used Windows install Cleaner. I found when I tried to install the vacuum it was already installed on the PC.  I ran and it worked with no run-time error.  I stopped and restarted and not have Roxio stuff want to install.

• Windows installs 3/3 stakes to date "do not turn off your computer.

  Originl title:

  Windows Vista updates

  My laptop does not restart after a recent windows update. All I get is a screen saying "can I install 3 of 3 updates" do not turn off your computer. When it is made 100% it tells me that it restarts. When that happens he tells me it is reinstall 3 3 updates everywhere! When I start my laptop in safe mode, I get the same answer. I'm in a loop.

  Tried to repair after updates by putting in the re - install the windows disc. Even if it will not start at the top.

  Help

  Hello
  1. Are not able to perform you reinstall?
  2. A reinstall succsesfull?
  3. Are not able to launch the start of the disc to perform you reinstall?
  Method 1:
  You can read the following article and check if it solves the problem:
  Windows Update crashes when the download or installation of updates
  http://support.Microsoft.com/kb/2700567
  Note:
  You can back up data to an external hard drive and no CD. It is essential to back up data even if you do an upgrade on the spot.

  Reference:

  Back up your files

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-your-files

   
  Method 2:
   

  You can perform a clean boot.

  To help resolve the error and other messages, you can start Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  How to solve the problem by running the clean boot in Windows Vista:
  http://support.Microsoft.com/kb/929135

  Note: when you are finished troubleshooting, work step 7: to reset the computer as usual.

  Method 3:

  Temporarily disable the software antivirus (and any other security software) and firewall on the computer as a test and check if this solves the problem.

  Disable the anti-virus software

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-which-programs-Windows-uses-by-default

  Enable or disable Windows Firewall

  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Firewall-on-or-off

  Caution:

  Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 4:

  Check the disc and see if it helps.

  Check a drive for errors

  http://Windows.Microsoft.com/en-us/Windows-Vista/check-your-hard-disk-for-errors

  Chkdsk WARNING: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

  Method 5:
  Note the number of the Base of knowledge (KB) then go to the Microsoft Download Center and enter the number (KB) Knowledge Base Search updates and download to install them manually.
  
  Microsoft Download Center
   
  I hope this helps!

• My computer freezes when I turn off the printer. HP D7360, Windows Desktop.Photosmart 7

  When I turn my printer off the computer crashes.  HP desktop computer.  Windows 7.  Photosmart D7360.

  I reinstalled the drivers.

  Have you tried a different usb cable? It could be that the usb cable is grounded on which could be a short circuit in the usb cable, or the printer port. Although it is also possible that this is the USB controller on the motherboard of your computer to try another cable is fixed not try with another computer if possible. If the other computer does not have any problems, then it's HP desktop computer. When you do that, you are out of my field of expertise friend . (In other words, if this does not work, try your luck on the forums of office or by calling the 1-800-474-6836)

  I hope this helps!