NetBook HP Mini series 4CZ048138J white screen

Similar Questions

• White screen on dv6 series!

  Before all sorry if this topic already exists but I don't know if it's the same problem. I have a dv6-2105so and dv9091ea. They are both purchased in Sweden. They worked correctly until there was a problem during the start-up. When I try to turn them on, they have a blank screen. Its black and there is nothing else. Sometimes a HP logo appears and disappears. Several months ago, that my computer would sometimes stop suddenly, usually when the CPU usage is high. Dv9091ea didn't stop suddenly. Then a few weeks later, when I turned it on I got a white screen for the first time. I tried to turn it on a few moments later and it works normally, without any empty screen. But white screen continues to happen more often and now I can not turn one of them at all. Thanks in advance.

  Hi Playernum2,

  Please follow the steps described in the following Document and let me know the results so that we can isolate and identify the problem in a better way.

  Overview of how to solve problems when a computer is not Boot or Start Up correctly: http://support.hp.com/us-en/document/c01443371

  ! - Please click the White Star in the blue box to give CONGRATULATIONS if this answer was useful or accurate your question or problem.
  If my answer has solved the problem, please click Accept as solution button -!
  I am an employee of HP, but I do not speak for HP. The views and opinions I express here are mine.

• I am trying to download a trial version of photoshop CC. All I get is a series of squares moving around the center of a blank (white) screen. What I am doing wrong?

  I am trying to download a trial version of photoshop CC. All I get is a series of squares in round square in the middle of a white screen.
  What I am doing wrong?

  Seems like a problem with the browser you are using.

  Can you try on Chrome or clear the IE cache/cookies and try again.

• White screen on my laptop in Satellte C series

  Hello

  After turning the laptop on all I get is white screen, clues?

  I found very good answer on this forum.

  A white screen usually means that the backlight is on but no signal reaches the graphics card on the screen.

  This could have many reasons such as:

  broken-a the cable screen
  -graphics card failure
  -view controller malfunction
  -some short circuit between the graphics card and the screen

  In your situtaion I use the warranty (if still present), send the machine to the nearest available service provider and let them check the hardware on some failures...

  That's all I can tell you from my experience with white screens.

• Podcast app only give white screen AppleTV4

  When I enter the Apple podcast app on my tv4, it hangs on a white screen.

  I tried now two factory resets but still the same.

  Anyone else having this problem?

  Found a solution.

  Removed the power cord 3 min.

  Just strange 2 factory reset did not work.

• White screen on Equium P200

  Hi all!
  yesterday morning I started my computer, after 5 min, I close the lid, and I'm going to work.
  When I'm back back I opened the lid and I get a white screen.
  Well, I think is right for the moment. I restarted but white screen again.
  I restarted many times but nothing. I heard the noise of vista hard drive to work, but I don't get nothing on the screen. I'm trying to connect an external monitor but nothing.
  Anyone have this problem? I Don t has an idea of what I can do to recover the normal screen of you.
  If I use reinstall drive I lose all my data and I don't want to. Can someone help me with a few great ideea what can I do?
  Thank you much in advance.

  A white screen usually means that the backlight is on but no signal reaches the graphics card on the screen. This could have many reasons such as:

  -a broken screen cable
  -graphics card failure
  -view controller malfunction
  -some short circuit between the graphics card and the screen

  In your situtaion I use warranty (if still present), sending the machine to the [the closest available service provider | http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_whitepaper.jsp?service=EU&WHITEPAPER_ID=0 000000871] and have them check the hardware on some failures...

  That's all I can tell you from my experience with white screens...

  Welcome them

• Satellite A210 PSAFGC - Bios Update to get rid of the white screen problem

  I also have the white screen problem and I would like to update my bios to version 1.30, it came with.
  The problem I have is that I have a number of room A210 model PSAFGC.
  Support bulletin 98082422 for the update of the Bios does not have my room exactly number and I can not find something for my model.
  The 2 updates are at 1.70 and 1.90. I read the text of these two, and they seem quite different.
  Don't know what to do. Here is the info of the bulletin.

  Resolution:

  Update the BIOS of the computer to resolve this problem, by clicking on the link in the following list for your computer model.

  -Satellite A210 / A215, Ref. PSAFGU: BIOS version 1.70
  -Satellite A210 / A215, Ref. PSAEGU and PSAELU: BIOS version 1.90
  -Satellite Pro A210 / A215, Ref. PSAFHU: BIOS version 1.70
  -Satellite P200D / P205D, Ref. PSPBLU and PSPBQU: BIOS version 1.40

  REF. of the computer it is printed on a label on the underside of the case.

  Any help?

  Hello

  The Satellite * A210 PSAFGC * series seems to be a Toshiba * Canadian * series and I would recommend checking the Canadian driver Toshiba page if you want to download the compatible BIOS for your laptop.

  Here is the link to the page:
  http://support.Toshiba.ca/support/download/ln_bymodel.asp

  Best regards

• I went to upgrade to El Capitan, it was last night. I have a blank white screen. I tried to turn off my computer, but when I turn it back on all that I get is a status bar that shows its about 3/4 downloaded and then it goes back to a blank white thyristo

  I tried to download El Capitan. Has started last night. all I have is a blank white screen. I stop my computor waited awhile and he turned his back. I work around a status bar indicating that it is about 3/4 full, then it goes back to a blank white screen?

  I had this problem too on my iMac (21.5 inch, late 2009) and I tried to restore to the previous version and then do the update again, but I got the same results.  I also tried to reinstall OS X option of the application of the utilities on the recovery disk that took a few hours but got the same results.  Finally, I tried to restart and make a secure boot (hold down the SHIFT key when the bell rang and rejection when the Apple shows up) and I was able to get the computer to boot.  When I logged in a window pops up saying "Complete Installation" and still had 6 min.  When he finally finished, I was an able to connect as usual and everything works fine now.   My mid 2009 Macbook Pro has no problems with the update but my iMac has been a pain.  I hope this helps you and anyone else who may have this problem.

  iMac (21.5 inch, late 2009)

• Mini series 3 not putting monitor in power save

  I have a T510 with a Mini Dock Series 3.

  Everything works as planned, except when you are using DisplayPort between the dock and my Dell monitor, the monitor will not go into saving energy. When it is connected directly using DisplayPort, the monitor will be able to register without problems, every time.

  This problem occurs for the shutdown, Hibernate and sleep. The only time where energy saving working properly is in standby. Wake on LAN and the other suspects usual, that all seem to be set correctly.

  Most often, after its judgment (etc.), the screen displays "power saving", turns off for about 10 seconds, him returns with the message "cable not connected" (which means no energy saving).

  Everyone knows this?

  Or, in other words, someone else monitor the work of energy saving as expected with a Mini Series 3?

  My solution for the T510 must use DVI on my Dell 2408, since to my Dell 2408 DisplayPort has failed.

  I looked at the dock when Windows is shut down and after that the T510 stops, 10 seconds later, the dock lights up briefly and the monitor on.

  When bypassing the dock and direct connection on DisplayPort, Dell behaved very well

  I have concluded that implementing Dell of the DisplayPort power saving function was not compatible with the dock, or at least with what the dock was 10 seconds after the end of the window. I have no idea why the dock does this, but I bet there's a good reason, otherwise... Why do.

  My guess is that your problem is similar, that is your monitor ' implementation of DVI power saving is not compatible with the behavior of sending power station about 10 seconds after stopping.

  Maybe take a look and see the sequence.

• my XP is not booting (white screen) and crashes at isapnp.sys then in safe mode.

  My XP Home Edition is not booting (white screen) and crashes at isapnp.sys then in safe mode. Please help as soon as possible because I need this platform for school!

  What is your system brand and model?

  Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

  The afflicted system has a CD/DVD drive work?

  You have a true bootable XP installation CD (it is not the same as any recovery CD provided with your system)?

  The symptom often means that your system is of a malicious software.

  With this particular symptom of hanging on isapnp.sys in Mode safe is to search for a driver of zero-byte length file in the c:\windows\system32\drivers folder.

  Of course, you have to boot the system on something in order to access the hard drive to find the suspicious file and get rid of it.

  If you have any installation CD bootable XP real where you start in the XP Recovery Console, or you are not sure what type of bootable CD, you have,
  make a CD of bootable XP Recovery Console or Hiren Boot CD and don't forget.

  There is no XP media needed to make a Hiren Boot CD or a bootable XP Recovery Console.  You can access the folder and check if
  There is this action suspect file and take.

  Once you're booted to the CD of your choice, navigate to the following folder (assuming that XP is installed on your C volume):

  c:\Windows\System32\Drivers

  Looking for a file that ends with an extension .sys and zero bytes in length.  The file can also have a curious name because she may have been generated at random.

  If you are in the XP Recovery Console, issue the following command in the c:\windows\system32\drivers folder:

  dir *.sys

  Files Scrolls one screen at a time.  Look at the list of files with .sys extensions and their lengths.  You don't need to
  worry about directories...  If you see a file with a .sys extension which is zero byte, it is suspect.

  If you use just the Mini XP Mode a Hiren boot CD (which works as Office XP), navigate to the folder of the my
  Computer desktop icon and locates the suspect files.

  You really want to remove the suspicious file once you get running and you run some scans for malware, but if you are
  not sure what is the suspicious file or if it might be necessary, just rename the suspicious file for now, in case you are not sure.

  For example, if you find zigxrtml.sys folder had a length of zero byte, rename it:

  Rename zigxrtml.sys zigxrtml.bad

  Renaming or removing the suspicious file to get the system running is not resolved the problem.  It is the symptom of the problem.

  The problem is your system is infected by malicious software and you should always follow up with a few scans to remove infections.

  Once your system is running, followed with MBAM and SAS to be sure that the affliction has really been removed.

  Reduce the risk of malware by running some scans.

  Download, install, update and do a full scan with these free malware detection programs can solve any problems:

  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/

  It can be uninstalled later if you wish.

  The scans by operating clean, restart, test your task manager and we can repair any other pending issues.

  Do, or do not. There is no test.

  I decided to implement the points for a new puppy instead of a pony!

• Can I use my laptop CD drive good install disks of program on another mini laptop (with broken screen)?

  I have a Dell Inspiron Mini running on Windows XP, that I dropped and broke a plastic wedge.  The broken plastic cut a wire to the screen, leaving me with a white screen.  I was able to use the fn 1 toggle to turn on a second monitor via a HDMI cable.  However, I decided that the blank white screen bothers my eyes, I went into the display settings and select 'make this my main screen' which means, do my main screen TV.  However, he turned off the TV screen instead of the empty white laptop screen.  The Fn 1 button no longer works.  I tried to do a manual telephone walkthough with Dell system restore.  By restoring the computer to its factory settings, I should allowed to use the Fn 1 button again to turn on my TV via HDMI cable - without success.  Therefore, Dell confirmed that I had a software internal problem and recommended that I post him for repair (no guarantee).  The Dell Inspiron Mini has no CD Rom internal drive, however, I have the original disks supplied with the notebook software program which is five years (or more).  The Dell Inspiron Mini operating system is Windows XP.

  Now, I have a laptop HP large format, with CD Rom drive, running on Windows 7.   Can I use my HP CD Rom to install the original records of the original Dell Inspiron mini Dell program?  Thank you.

  Thanks for the tips.

  You are welcome. :)

• I have just a white screen with complete audio on Windows Media Player.

  Original title: sound, no video

  I ordered a series of dog training DVD.  When I went to download the premiera and play via Windows Media Player, I have audio, but the captain was missing, just a screen dance of psychedelic images.  I've screwed around a bit and go get rid of it, but now I just have a white screen with complete audio.

  Thinking I need a plug in I released on bail and downloaded the same clip on my laptop. Same thing, only it started with a white screen.  I doubt that this is a problem with the link, but he has seen it happen on 2 different puters a wonder.  I am running Vista on my desk, I think it is XP on the laptop.

  Help?

  Hi Dave,.

  I suggest you to follow the steps from the link and check if it helps.

  The screen may appear black or green during playback when the Windows Media Player control is embedded in a Web page

  I hope this helps.

• white screen after that vista went on mode 'sleep'

  Hello

  My laptop started to have problems after going sleep mode hibernation recently. I run a Dell Vostro under Vista 32 bit. My big problem is that I can't test one of the solutions I found on the internet so far because even with a forced shutdown the laptop never start back. White screen. Nothing is ever displayed.
  Last time I went out that holding the key FN holding power. Then released. The screen came blue and memory tests and drive hard started. I let it run and no problem was found on the hardware side. After the tests were performed, the computer restarts and I press F8 to boot into safe mode. Everything went well for a week after this episode. I tried the "sleep mode" once again and it was as if nothing ever happens. Everything worked well.
  And now, it's happening once again. This time, the combination FN-power supply does not work. Nothing appears on the screen ever. The power button not blink or change color. The hard drive light turns on for 3 seconds only when I try to start. Then it's screen white and everything that I hear the laptop fan...
  Any idea of someone from the combination of keys to force start the laptop into a kind of safe mode?
  Thank you very much!!!

  So it seems that I have to respond to me :) Just in case someone goes nuts facing the same issue, find multiple options on the web 2007 update you this, change the configuration that say, start in SafeMode etc., here is what I found to get out of the black screen after a watch on my laptop. I hope this might help someone else:

  1. Open the housing by unscrewing all to access the battery (not easy, go slowly and carefully do not damage the fragile covers). I hope that your battery is more accessible than mine.
  2. Disconnect the battery cable (if you have my laptop Dell Vostro: first - raise the head end of the connector so you can exit the orange cable gently)
  3. At this point, the rear of the laptop is completely "naked".
  4. Unplug the power cable
  5. Press and hold the power button to laptop for 30 sec.
  6. Plug the power cable back (battery is always not connected)
  7. Press the FN key + power button for 1 second and release them both at the same time
  8. The DELL logo is displayed, and finally the screen is not black more! I need the pre-boot system assessment tests. I hope that you will have this screen also. I suggest that you run the tests. In my case, nothing was wrong with the hardware. This is a Windows problem.

  After this step, I was able to start in safe mode and play with the features of windows. Since I'm a busy mom and small business owner, I don't have time to assess what is wrong or even think to completely replace Windows on an old computer laptop 1 year part-time, so far. So I just canceled the sleep function for now.

  Good luck.
   

• I was somehow infected and after restarting the laptop, it goes to a white screen.

  Original title: Virus

  I have an old HP Pavilion 2008. I was somehow infected and after restarting the laptop, it goes to a white screen. Not even the HP logo lights up. I can't access installation even though I know which key press.

  I created a bootable windows DVD 7 and a USB port. I can not even boot from one of them. With the DVD, it sounds like it wants to read, but there is something else wrong.

  Any help would be greatly appreciated.

  If the HP logo comes and you can't access BIOS, the problem is more likely to be at a lower level. A failed HARD drive should not prevent you from access to the configuration.

  Several things can cause the logo appears at the top (I write from a HP Pavillion 2008). I've dealt with many laptops such as yours and have seen many causes. Faulty RAM memory is a. A problem with the video chip is another. In fact several kinds of tokens (two bridges, video..). A virus is more unlikely but not impossible (if he messed with your BIOS, it is possible).

  If you don't see movement in your DVD or HARD drive, something I'm leaning more towards the video chip. Especially if it's Nvidia or Radeon - it would be a miracle if you use an HP laptop of 9 years with a powerful video (so that there is time) without having had any problems with it until now (mine is Intel). They overheat easily.

  What I would do in your case:

  1. remove the battery and unplug the unit. Give it 10 minutes and see what happens. Small chance, it would be useful, but it's easier to test.

  2. If you are reluctant to remove anything yourself proceed to 4. Otherwise, open the case and look for a reset (might want to read in the manual how to do it), remove the internal battery.

  3 try to remove the first (try to run) then the other of your plates to RAM (assuming you have two). During the race, all the tests remove the drive HARD and DVD just to eliminate the possibility of interference. If you manage to get started and get the logo and enter BIOS start adding parts back one by one and you will find the faulty one.

  4. If it at a gas station. Now you can do anything, if you can not enter BIOS so it must be a hardware change.

• Interior canvas full screen white screen returns

  The following code gives me a white screen:

  class gameScreen extends FullScreen {
  
    Graphics graphics;  rimSprite hero;
  
    public gameScreen() {    super(Screen.USE_ALL_HEIGHT | Screen.USE_ALL_WIDTH);    System.out.println(">>>>> Gamescreen loading...");    graphics = getGraphics();    graphics.setBackgroundColor(Color.BLUE);    graphics.drawText("test", 40, 40);    try {      hero = new rimSprite("img/player.gif", 1, 20, 20, 20);      hero.setFrame(3);      hero.paint(graphics);    } catch (Exception e) {      System.out.println(">>>>> Message was: " + e.getMessage());    }    paint(graphics);    System.out.println(">>>>> Gamescreen loaded.");  }}
  

  And I don't see why... I try to paint the screen but somehow, I get a white screen.

  I've found a few discussions with the same problem as mine... enlighten me please!

  Are you trying to push a screen on which you can paint the bitmap images and other things.

  If Yes, then let me give you an example how you can do it.

  import net.rim.device.api.ui.UiApplication;
  import net.rim.device.api.ui.container.FullScreen;
  import net.rim.device.api.ui.Graphics;
  import net.rim.device.api.system.Display;
  
  class Main extends UiApplication
  {
      public  Main()
      {
          super();
          PaintScreen paintScreen = new PaintScreen();
          pushScreen(paintScreen);
      }
      public static void main(String[] args)
      {
          Main main  = new Main();
          main.enterEventDispatcher();
      }
  
      public class PaintScreen extends FullScreen
      {
          public PaintScreen()
          {
              super();
              paintSomething();
          }
  
          public void paintSomething()
          {
              UiApplication.getUiApplication().invokeLater(new Runnable()
              {
                  public void run()
                  {
                      draw();
  
                  }//end of run()
              });//end of runnable()
          }
  
          public void draw()
          {
              Graphics graphics = this.getGraphics();
              int w = Display.getWidth();
              int h = Display.getHeight();
  
              graphics.setColor(0x00000000);
              graphics.fillRect(0, 0, w/2, h/2);
  
              graphics.setColor(0x00FF0000);
              graphics.fillRect(w/2, 0, w/2, h/2);
  
              graphics.setColor(0x0000FF00);
              graphics.fillRect(0, h/2, w/2, h/2);
  
              graphics.setColor(0x000000FF);
              graphics.fillRect(w/2, h/2, w/2, h/2);
  
              this.updateDisplay();
          }
          public boolean onClose()
          {
              this.close();
              return true;
          }
      }
  } 
  

  Concerning

  Bika