NetBook NB100: Black screen after Toshiba leading innovation

Similar Questions

• NB100 - black screen after removing RAM

  I recently pulled out my RAM blowing my computer (for dust) I put again, and then the computer screen just goes black.
  Ive left it for some time now. How long should I wait?

  Hello

  Usually the laptop must properly initialize after you put the RAM in slots
  Correctly insert you the RAM?

  Also try this:
  Remove the battery and unplug the AC adapter.
  Wait one hour and then reconnect the two parts.

  Then try to turn on the device

• NB100 black screen after memory upgrade

  My NB100 works well with the Samsung 1 GB of memory which was included when I bought it, but when I replaced the screen with a new Kingston 2 GB 667 MHz (2 G/VR667D2S5) doesn't show anything when I turn on the laptop back, even if the LED indicators seem normal and fans inside its normal.

  I tried a replacement memory (same type of Kingston) - still no luck. I put the old Samsung back and the laptop starts fine.

  Any ideas?

  Hey Buddy,

  What NB100 you have exactly? What is the number of exact part of it?

  AFAIK NB100 supports only 2 GB of RAM. This means that you can install the module of 1 GB in each slot, but not a 2 GB RAM module will not work.

  So, if you want only 2 GB of RAM, you will need to purchase an additional 1 GB module because the NB has two memory slots.

• Satellite L300D 242 hangs on the TOSHIBA Leading Innovation page

  Hello

  When I turn it on the laptop crashes: press F2 go to the configuration utility, F12 to start the Manager of... of which work niether
  The screen is a black background with TOSHIBA Leading Innovation > about this

  After a few minutes, it goes away leaving me with a black screen with nothing on it, as if it was in mode 'sleep' I think that
  But I can't seem to go as a result of check or search for anything, not even to restore the system.

  Model is a 4 months of ideas please before considering back under warranty... it could be something simple I'm just missing

  BTW not very comp savy

  Thanks Isabelle

  Hi Isabelle,.
  Looks like a hdd dead to me...

  If the warranty is still valid go and see a servicepartner...

• Satellite Pro P300 - 23L: can't get screen Toshiba Leading Innovation

  This is a cut and paste from a previous post, but the one I'm having a problem with today (save me typing again!):

  When I start my laptop, it stops on the first screen of the Toshiba innovation and only gives the opportunity to do two things. That's what he said to prevent the page * "Press F2 to enter Setup, F12 to access the selection of Multiboot Menu" * I tried both. I pressed F2, I press F12 and no one bothers me pst screen

  -When I press on either after the Toshiba screen is visible, they do nothing
  -If I press "F2" at the start, upward, the instructions at the bottom of the page says "Please Wait". However, I waited for hours and nothing ever happened. The "Please wait" message just sitting there.
  -If I press F12 during startup, upwards, the instructions at the bottom of the page says "press F2 SETUP, Entering boot device selection menu... "Then he is there and does anything just
  The screen Toshiba Leading Innovation remains all the time.

  I have tried removeing the battery and draining flea power - this does not solve the problem.

  When I restart the laptop, I get the situation according to the line 1 above. No amount of tap F8 does nothing... I'm still back to the page of the main Innovation of Toshiba.

  The fan works, but the HARD disk led never sparkles.

  Any suggestions please? Thank you

  Hello

  If the laptop is unable to pass the home screen Toshiba (POST-puissance on self test) then this behavior of the laptop is mainly related to a serious hardware problem.

  The defective HARD drive would not cause such a problem, because even if the HARD drive is faulty, the laptop must be able to pass such screen...

  So I guess there is something wrong with the RAM or the motherboard.
  Here you can check how to remove the RAM modules and insert the new memory:
  http://APS2.toshiba-tro.de/KB0/CRU9902O80001R01.htm

  If the problem is not related to defective RAM, then other parts like the motherboard (maybe module BIOS EPROM) must be verified... but such verification requires additional special tools and that's why I think it would be a job for a laptop technicians...

• Satellite U940 - 10 c freeze after show "Toshiba leading innovation.

  Good afternoon.

  My U940 stucks in the screen "Toshiba leading innovation" and it is impossible to get to the BIOS (F2 or F12). I tried unplugging all the memories (RAM, SSD, HARD drive) and the main battery; but it was useless.

  Any ideas?
  Thanks in advance!

  In my opinion, your motherboard is affected.
  I'm not quite sure what part of the motherboard could cause such problems, but in my personal opinion that replacement motherboard could help you to fix this m

• Satellite C50D - Stuck on splash screen "Toshiba leading innovation.

  Hey I have a new laptop of Toshiba C50D-A satellite.

  When I start it it won t go Toshiba leading innovation > screen. I can access the start screen by pressing F12 and accesses the Setup utility by pressing f2.
  Someone has ideas of how to do to solve this problem? Or what's wrong with it

  Hello

  On this virtual path, it is not easy to say what the problem is here.
  Can enter you recover or repair options - http://aps2.toshiba-tro.de/kb0/TSB2A03ES0000R01.htm?
  If so try please use some repair options.

• Satellite Pro S500 - Freezed at Toshiba leading innovation frontpage

  Hello

  My new Satellite Pro S500, age: 2 hours have just made the 'start-up' and installed all the drivers. My first step was to spend + updated windows + and update various security patches, etc. Windows identified 74 updates - and let the laptop do the download. He installed about 15% and restarted automatically. The laptop started upwards, installed about 30% and restarted.

  Now, the laptop has * freezed * on the first page of "Toshiba - Leading Innovation". If I try to power off the laptop computer he turns to fashion - watch and go back to the page of "Toshiba" once again.

  Any ideas of how out of this loop?

  Thanks in advance
  B

  Hey,.

  And have you ever tried to remove the battery and the AC/DC adapter? Try this and leave both disconnected for at least an hour.

  Then install the battery and plug in the AC adapter and try restarting your laptop. T he past the BIOS Toshiba screen now?

• Persistent black screen after startup on Satellite Pro A210 (PSAFHE)

  Need help, need advice on how to solve a persistant problem with black screen after put into initial service.

  Initially its fine but after the initial Toshiba of the screen just goes black, and the rest in this way, the PC stays on. Have you tried F8 options but all result in the same.

  Help please.

  Hello

  You can access the BIOS by pressing F2?
  Boot from a boot as Recovery DVD disk?

  If both is not possible, I'm afraid you have a serious hardware problem m.
  In this case, I get just speculate on the affected parts. Maybe his problem GPU or motherboard who knows

• Satellite A100-906 - gel @ Toshiba Leading Innovation

  Hi all

  All the world is facing a problem where the laptop freezes on Toshiba Leading Innovation. The weird part is that, when you connect the laptop to an external monitor, everything works well.
  I tried to replace the LCD, Inverter, cable LCD and VGA (its Nvidia 256) and still the same problem.
  Updated the bios to version 6.0 always the same. Read in some forum that downgrading to version 5.90 will solve so made but still the same thing.

  I don't know if it has nothing to do with the error of TPM secure that I get. When I turn on the laptop and you press ESC before it freezes, after memory check it says that "no TPM or TPM has problem" (note that this error even when you plug in an external monitor but on external everything works fine. and after loading windows if you switch the monitor to the portable computer LCD laptop works very well without any problem)

  I check in the Bios, TPM option is greyed out then you cannot activate or disable it from BIOS.

  Hello

  I think it s a hardware problem seriously looks like the motherboard could be assigned to all ports (VGA port as well) are part of the motherboard.
  It s very strange that the laptop could start only if the external monitor is connected, but in my opinion, this can be only a related problem of the motherboard
  I have no other explanation

  Sorry mate for this General info, but that's all I can suggest to the present case

• Qosmio X 870-149 - black screen after update to 8.1 win

  After an update to win 8.1, I got a black screen after connection, the only thing I could do was to press zero when starting and make a recovery facility.

  It took 40 hours, I don't know why it took so long, but when it was over, the HARD drive was completely empty, so I installed win 7 instead, because I had not done? a restore CD. The problem now is that I still get black screen between the two, and think it might be a heat problem, I still have the warranty, but I don't know if it applies when I installed win 7 on the machine.

  I still have a warranty on my Qosmio toshiba

  Hello

  Well, the guarantee covers material related problems. It does not any problem with the software.

  Now the question is: why the black screen appears?
  Is - this problem is hardware or software?

  What happens if you access the BIOS?
  You don't see anything on the screen?

  Something is visible on the external monitor?

• Satellite M70 - black screen after the installation of recovery

  So far, what I did is put in the Recovery DVD - ROM product. Then when my computer restarts I was invited to restore my computer failing and said. After that he went through this process, that he told me to remove the disc that I did. Now he only get a black screen after the Toshiba screen that gives me options f2 for Setup and f12 for options.

  I don't know what to do now to make my laptop works again. Help, please.

  Hi Zach_1,

  Have you tried to launch the installation of recovery again? Maybe that something was wrong during the first installation, it might have arrived
  Then retry the recovery facility and see what happens.

  If it doesn't work you should try a normal Microsoft disk so determine if the problem is related to hardware or recovery disk.

• Corrupt BIOS V5 531 Acer black screen after startup, f2 and f12 also. Repairable?

  Hello

  Yesterday I tried to install Win 7 if I could play D & D Neverwinter on Arc after using * nix systems study (looking to start a career as an administrator). I had plugged into a power strip that was, unbeknownst to me, turned off and I went to make coffee and watch some news. When I came back to check the progress of my laptop was powered off and since then I havn't been avle start without being blocked at a black screen after the start page of the bios. The f2 and f12 also leads to a black screen, I can not change the boot device or enter the bios Setup.

  Is - fixable at all? For example, is the a key-combo, I can use it to restore from a backup bios? Or, do I have to bring in a technician who can install a new chip bios or flash this old some how? Or did I brick pemanently my device?

  V1.22 is what you want to be part of a unit of Windows 7.

  The problem is if it crashed during the upgrade process, it will take some special tools clearly on the chip on the MB and recharge it with a new BIOS. I would contact your local support team to see what options are available.

• Black screen after start - "Video_tdr_failure atikmpag.sys.

  Original title: black screen after startup

  A few days ago I accidentally dropped my laptop I was trying to pick it up. It froze and I used the power button to stop it. The next day, it worked very well, I played a game, but then the screen got all blurry and it froze again. Therefore, whenever I started it normally, I would get a blank screen. But in Safe Mode, it worked fine.

  I assumed it was my hard drive, I got a new and it seemed to work very well, I had reinstalled W7. Until I tried to install the updates and it the screen went white again. I used the system restore and got it to do work. Then decided to move to W10.

  After the upgrade, the pc restarted with a white screen, I have it connected to the TV with an hdmi cable while you try to start it, then the screen worked fine. He stayed very well until I tried to install the updates. It would not just start up. He gave to the page «Video_tdr_failure atikmpag.sys»

  I returned to Windows 7 and now it always starts with a blank screen.

  * the screen works very well throughout the boot process

  And works fine in Safe Mode *.

  Chances are, at least (if not more) there is now a default in the video circuits.

  Be aware, the laptops are very delicate animals.  This type of accident will most often mean end of system life.  The biggest problem is the cost of the repairs in such a situation.  The pieces are almost all owners - read overvalued.  Repairs made by technicians who are not deeply experienced in the setting of your particular brand/model are often insufficiently.  Which leads you onto the OEM repair service that is overvalued.

  The result is that once a laptop is spent on the brand of 3 years, repair of such a system in such circumstances: the replacement more often.

  Well consider a desktop computer type for a replacement.  They are cheaper to begin with, usually more powerful - sometimes by a factor of 2, are easily repairable using components of off - the shelf that are commonly available and one made by several competitors.   Desktop computers usually hold up well almost two times longer.  From an ergonomic point of view, laptops are considered experts machines of 20 minutes.  Use of meaning beyond that time can be bad for your health.

• Pavilion 15 - p065tx: Pavilion 15 - p065tx, black screen after BIOS update recommended by HP assistant

  System reboot with black screen after accepting the update of the BIOS recommended by HP assistant this morning. AC power on at least three hours of waiting after the process completed successfully with auto update reboots always.

  Power light is on. Wired broadband light is turned on. Light CAP LOCK keyboard and led speaker hold noway.

  Hard reset has been tried 3 times with no improvement.

  External monitor is connected but no signal has been out of the laptop, screen is black.

  Done a few times this page to reset the BIOS setting blindly:

  http://support.HP.com/us-en/document/c02217843

  BEEPS heard when you press F10 or F5 during procedures. But still black screen.

  What can I try again?  Please advice kindly!

  Hi @ sokw,

  I have read and reviewed the post. Thanks for your reply. It seems that bios is damaged, and that is why the computer does not start. As it cannot be fixed by any software troubleshooting, you will need to contact the HP support by phone for the machine.

  HP technical support are available by clicking on the following link:
  
  http://h22207.www2.HP.com/us-en/?openCLC=true
  
  (1) once the page opens, please select the country in which you are located. Then enter your model of HP on the right number.
  
  (2) then choose "Contact the Support" tab at the top and scroll to the bottom of the page "HP Support - contact" to fill out the form with your details.
  
  (3) Once finished, click the "Show Options" at the bottom right.
  
  (4) Finally, scroll to the bottom of the page and select "Get a phone number." A file number and telephone number will now fill for you.

  I hope this helps. I would like to know how this happens. I really hope that the problem is solved without hassle and the unit works very well. Believe me, I've done everything I can to help by keeping your interests in mind. Please reach out for questions and I'll be there for you help.

  Just to say thank youPlease click the ' Thumbs Up 'button to give a Kudos to appreciate my efforts to help me. If it helps, Please mark this "accepted Solution" because it will help many other people with the same problem to get it resolved without hassle.

  Now carefully and have a wonderful week ahead.