NetBook - problems with the size of the screen when you play

Similar Questions

• Problem with the screen when it rains it is wet

  Hello world
  Any of you had a similar problem like me?
  I noticed this before, when the screen is wet or raining on her is pushing screen by itself.
  At first I thought it's because problem of protector of screen, but 3 days ago when it rained, I wasn't able to use my phone at all, and I needed to call so consider screen protector, but the problem was still there.
  Like water proof phone that this should not happen.
  Is there a problem like that with my phone only?
  Should I inform Sony about this and send for repair?

  When the device comes into contact with water, the touchscreen misbehave. It's normal, that's why you have app touch block to take pictures under water.

• Problem with the resolution when you connect to a projector

  I regularly used my laptop connected to a projector via a cable VGA for PowerPoint and video clips view in Windows Media Player.   It is automatically detected and adjusted for different sizes of screen of the laptop screen (1366 x 768) and projector (1024 x 768) and projected with success.   Recently I connected the laptop to a second monitor - also 1024 x 768 - instead, and even once, it fits perfectly.

  It suddenly stopped setting for the resolution of the projector; When I go to the resolution of the screen, the option to set the resolution of the second screen is grayed out.   No matter if I use extend or duplicate, he insists that the two screens are 1366 x 768.   This has happened with two projectors, all two used to work properly.   I also tried different VGA cables.  The end result is that the image of the projector is hurry to tray.

  I can connect fine to the second monitor via the VGA port and sometimes with different resolutions for both screens.   I can also connect to a TV via an HDMI cable.   I can't try a HDMI cable for the spotlight as it is ceiling mounted, and the other is old and is not an HDMI connection.

  I checked the drivers and they seem to be up to date.

  My laptop is a Dell Latitude running Windows 7.   The graphics card is an Intel HD Graphics 3000.   I tried many suggestions already given on these forums without success.   The real puzzle is that it was working fine and nothing I can draw has changed except that I connected on the other monitor.

  Hi Tony,.

  Thanks for the reply with the status of the issue. I'm sorry to know that the issue is still unresolved, your efforts to solve this problem are much appreciated.

  I suggest to follow the method below and check if that helps:

  Method 1: Perform a system restore.

  System restore

  http://Windows.Microsoft.com/en-us/Windows7/products/features/system-restore

  System restore WARNING: when you use the system restore to restore the computer to a previous state, the programs and updates that you have installed are removed.

  Method 2: Uninstall all hidden devices:

  Step 1: See the article below to activate the devices hidden in Device Manager.

  Look at a hidden devices

  http://msdn.Microsoft.com/en-us/library/Windows/hardware/ff553955 (v = vs. 85) .aspx

  Step 2: After you enable hidden devices, remove devices from Device Manager.

  1. press start.

  2. type device manager in the start search box.

  3. Select Device Manager in the search result.

  4 uninstall everything that are grey also uninstall the drivers to display completely.
  5 restart the computer and install the drivers to view the manufacturer's Web site.

  Hope this information helps, just reply to the State of the question to get help.

  Hi Rizwan

  Unfortunately, I do not have a restore point old enough until the problem occurred.   I have not found any that was relevant in hidden devices, but in normal Device Manager mode when I clicked on "monitor" it opened a "Generic PnP" entry even when there was no extra monitor or projector fixed.   When an additional monitor has been attached, there were two of these entries.   I disabled them both, and I found that I can now adjust the resolution of a second monitor to a different setting of the laptop screen.

  Thanks for your help.

  Tony

• Problems with the cursor when you type

  I don't know if it's something in Vista, but I have terrible problems in Word and when typing emails. I can touch type and normal type without looking at the screen. However, I find when I look at the screen, the cursor inexplicably himself stuck about4-6 rear lines and hit the last piece in the middle of the existing text. In fact it just happened again - when I type ing he climbed to the title: why!

  I feel responsible because I don't get it in the older microsoft software that I use at work and it has never done in internet cafes - didn't have it a few months, but it drives me crazy: why it does this?

  Patjom, make sure that you do not have to hide when you type the value of the mouse pointer. Here are the steps:

  Open mouse by clicking the Start button, click Control Panel, clicking hardware, and then clicking on the mouse.
  Click the Pointer Options tab, and then do one of the following:
  Uncheck the Hide pointer while typing Rami
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Problem with the date when you load the XML file into Oracle Database 10g

  Hi all
  
  I have the interface as shown in the screenshot below. In this document, among other things, I am mapping to an element XML file representing a date to an Oracle table column defined as DATE. The source and target columns are highlighted in the screenshot.
  
  ! http://img223.imageshack.us/img223/1565/odiscr275.jpg!
  
  When I run the interface, I get the following error message:
  
  java.lang.IllegalArgumentException to java.sql.Date.valueOf(Date.java:103)
  
  I guess that this is the conversion of the date!
  
  I already tried to replace SRC_TRADES. DEAL_DATE with TO_DATE (SRC_TRADES. DEAL_DATE, ' DD/MM/YYYY') on the implementation tab. This feature was not recognized when I executed the interface, so it did not work! The value of date in the XML file is in the format DD/MM/YYYY .
  
  I guess that Date SQL Oracle functions do not work in the implementation tab. Could someone let me know:
  
  1. what the Date Conversion function I could use instead?
  2. where can I find a reference to the methods/functions that I use in the implementation tab (if such a reference exists)?
  
  See you soon.
  
  James

  Hello.

  Try changing the area of execution at the staging area. Once you change it, write in the map box just SRC_TRADERS. DEAL_DATE. When you use TO_DATE, the source field typu should be varchar2, no date (as it is in store for your data source)

• Black bar very annoying on the right side of the screen when you play

  Hello

  I have read this is a common problem, but it doesn't seem to be a solution that works with everyone.

  About 10% of the screen is just a black vertical bar, as if the screen has moved to the left 3 cm

  I have tried a few techniques I've read including the change resolution to 1024, then turn on full screen, wide mode then reset the resolution... has worked a few times, but remains when it is no more to do after every restart (what a pain)

  Anyone got a more permanent solution?

  

  I've found a workaround (posted by hp)

  The obvious solution is to get the latest version of the bios, choosing fixed instead of dynamic stick and just with the gpu on board

  I found the solution (no thanks to hp) for those who want their laptop to act like it's supposed to without resorting to workaround...

  which means to choose a dynamic transition and still play their favourie without black bars that blocked views

  in any case, credit when it is earned, a guy named kharn83

  Download drivers ATI 11.9 or 64 ones

  just install this driver from HP on top and restart...

  worked like a charm here...

• Satellite Pro L20-someone ' one can tell me if I have a problem with the screen?

  Hello

  I have a Pro L20 - PSL25E and I recently had problems with the screen, it was intermittently flickering/lose color and whiting almost (when the color fades white vertical lines begin to appear).
  This seemed to worsen after that I dropped it (only from about 2 feet off the ground, not a big drop).

  I thought that the sceen can go, but the performance of the laptop seems to be affected when this happens, the laptop started to run very slow (tracks mouse slowly, programs I clicked take ages to run and it freezes sometimes to stop flashing) that had me thinking that it might be a virus or performance problem.

  My screen, drivers are updated, I did a full scan with McAfee, ran a clear-up system and a Defrag.

  I was wondering if anyone knew if it seemed to be a problem with the connections of the screen and would need replacement or if it could be repaired or if it were a performance problem?

  Any help would be great thank you appreciate!
  Rebecca.

  Looks like the graphics chip has a problem, which I think is a motherboard replacement.

  You can get a quote for repair to an authorized service provider. There is a list of ASP on the Toshiba site.

• Problem with the screen on IPAD curtain

  Hello

  I'm a bad psychic, and I have a problem with the screen curtain.

  A longitudinal of Voice Over, the screen curtain is automatically activate.

  Normally to turn it off, you must type three times with three fingers. Only on my IPAD when I type three times with three fingers is "saying that turns off or preach. Find it me impossible to disable the screen curtain when voiceover is active.

  The latest version of IOS 9.2.1 is installed.

  I reset the Ipad and nothing changes.

  Can someone help me?

  Thank you

  Is is possible that the zoom is also on your iPad? If this is the case, try to use a quadruple 3 finger tap to turn off screen curtain.

  If the zoom is not active, try:

  1. Possessing the sleep/wake and home button until the Apple logo appears or 15-20 seconds.
  2. If, you can't remove the curtain of the screen, I would advise you reset the settings of the iPad. Settings > general > reset > reset all settings. It will be his turn VoiceOver off, but then you can use iTunes to turn on VoiceOver. Voice-over should return without the curtain of the screen automatically active. IOS - Apple Support using accessibility features

  The of is it possible that zoom is also active your iPad? In this case, you must use a valve 3 quadruple finger pour disable the screen curtain.

  try if the zoom is not enabled:
  1. While holding the button market / sleep and home to ' to the Apple logo, or 15-20 seconds.
  2. If you still can't delete the screen curtain, I recommend to RESET the settings on the iPad. Settings > General > RESET > RESET all settings. This turns off VoiceOver, but you can then use iTunes to turn on VoiceOver. Back to turn voiceOver should without the curtain automatically active screen. Use IOS - Apple support accessibility features

  -AJ

• Problem with the Screen class

  Hello

  Please anyone suggest me that I had made an application for blackberry strom 9500 when I got extends the class of devices back button screen is disabled automatically. and when I extends the class screen it works correctly.

  I don't think that the class screen itself has the feature to close the screen when you press the ESC by default. If it isn't and you want to use it, you can pass the DEFAULT_CLOSE style to it.

  public class MyScreen extends Screen {     MyScreen(Manager m)     {          super(m, Screen.DEFAULT_CLOSE);      }
  
      protected void sublayout(int width, int height) {        // Add sublayout logic    }}
  

  Documentation: http://www.blackberry.com/developers/docs/5.0.0api/net/rim/device/api/ui/Screen.html#DEFAULT_CLOSE

  Is there a reason that you are using the Screen as opposed to screen or full screen class?

• my iPhone 6s has problems with the GPS when I use some applications, it does not work well and give especially the bad road. Can someone help me?

  my iPhone 6s has problems with the GPS when I use some applications, it does not work well and give especially the bad road. Can someone help me?

  My iphone 6 has started having the same problem. Its literally the GPS. Saying that it does not find me at all. Ive seen say location for more than an hour in the suburbs of chicago. It started to happen to me after I downloaded the latest update for the iphone. I hope they react and let you know what is happening because I'm dying to know as well.

• Hey I have a problem with the library, when I try to enable the creative cloud desktop application it keeps saying "cannot restore the file: C/users/USER name as the location of the file is not available."

  

  This is a double post of a following:

  Hey I have a problem with the library, when I try to enable the creative cloud desktop application it keeps saying "cannot restore the file: C/users/USER name as the location of the file is not available."

• Problem with the screen size of my application in the emulator for BlackBerry 10

  Hello, I have a problem with the emulator for BlackBerry 10 and is as follows:

  When I run my application in the emulator waving, sounds good and all content is complete, however, when I run the application in the emulator for BlackBerry 10 soft looks as if she had a zoom very large level of predefined way and only see a part of the application.

  With controller emulator, I have changed the level of 70% zoom, but still does not work.

  Here, I'm posting two photos:

  

  

  One future half-assed answer

  var dpr = 1; // To set the meta on a real device to get 1:1 pixels
  
  if(typeof window.devicePixelRatio != 'undefined') // Does device support devicePixelRatio?
      {
      dpr = window.devicePixelRatio;
      }
  
  if(dpr) // Set up the right meta
      {
      var meta = document.createElement("meta");    meta.setAttribute('name','viewport');
  
      meta.setAttribute('content','initial-scale='+ (1/window.devicePixelRatio) + ',user-scalable=no');
      document.getElementsByTagName('head')[0].appendChild(meta); // Inject meta
      }
  

  This works perfectly, but must be placed in thethe document FIRST and foremost

  Live JS is used to avoid problems of library management

  It won't work in Wellington but works perfectly on all devices I've tried

  As mentioned in the code above just packaging needs in the script tags and setting very high index.html HTML code as you can get - right after

• ThinkPad X 230 Windows 7-64: problems with the screen after updates

  Hi all

  I have a problem with the Thinkpad X 230. After a recent update of Windows 7 (64-bit), the screen resolution is set to 800 x 600 and brightness to the minimum. FN + F8/F9 does not work. The brightness is uncontrolled. I had to restore the system before the update.

  How to solve the problem, do anyone know?

  Thank you!

  Isosik

  Hi Isosik,

  Welcome to Lenovo Community!

  According to the request, we understand that you are facing problem with the display resolution on your ThinkPad X 230.

  If you have updated the drivers from Windows update, sometimes this kind of problem occurs with windows generic drivers for cause of driver incompatibility, suggest always update drivers only via the ThinkVantage System Update utility. Update only the application of Microsoft Windows Update.

  You can also manually download the drivers from the Lenovo support site.

  Lenovo support site.

  I hope this helps.

  Best regards

  Agnes Kumar

• I'm having a problem with the screen resolution cannot be superior to 800 x 600 pixels

  All this began after I plug an i9 phone to my pc to load

  later, to this day, when I turned on my pc screen resolution would not stay how I put it

  He wants to just go to 800 x 600 pixels.

  I ran microsoft security scan it found and deleted a virus java exploit cve 2010-4452

  but still having trouble with the screen resolution

  If the problem occurred after you plugged into your phone. I suggest to perform a restore of the system automatically, put it on a date 2 days before you had the problem. If this isn't the case, you can check the video card driver:

  Start > run > devmgmt.msc
  Check your video card driver or see if there are any missing drivers
  If its lack, then update or install the driver of your video card.
  I hope this helps you! Good luck.

• How can I solve very slow scrolling with the mouse when you press the command key? (MacBook Pro, Lion, no problem when using trackpad, no problem with other web browsers, other mice have the same problem)

  Scrolling speed is fine, but when you press the command key and then it becomes very slow.

  He does it with a mouse, but not with the trackpad.
  It does when the modules are disabled.
  No problem on Safari or Chrome.
  No problem on PC.

  I think it all started when I went form a MacBook with Snow Leopard on a MacBook Pro with Lion.

  Any help would be much appreciated.

  Thanks in advance!

  You use the mouse wheel to scroll?

  There are some prefs mousewheel, which control the behavior when you press the modifier keys.
  
  You can set the key to the action of each to 0 for normal scroll.

  See http://kb.mozillazine.org/About:config_entries #Mousewheel.