Netflix does not work in Vista Media Center window

Similar Questions

• MS HRV-1100 remote does not work with windows7 media center

  I'll put up a replacement for my old Media Center computer, using windows 7. I have an old MS Vista MCE remote HRV-1100. Apparently, the drivers are installed automatically when I plugged in the receiver, and verified by the menu devices, the most recent driver is installed. The passage of the mouse of the remote works; I can move the cursor on the screen and the function of the left/right buttons. I can use the functions of the mouse to navigate the MCE menus but none of the arrow buttons L/R/U/D, the "back" button, etc seem to work at all. I can't find anything in the configuration of the MCE to succeed, either. Is there a way to make the regular command buttons work?

  Thank you
  Charlie

  Hi Charlie,

  We are happy to know that you have solved the problem.

  If you have questions about Windows operating systems, contact us on this forum. We are pleased to be of assistance.

• Satellite A300D-158 illumination button does not work on Vista

  Buttons light Toshiba does not work under Vista.

  I installed added package versions available in Toshiba support page, but Toshiba Assist do not see the list of function buttons where I can change the feature keys.

  When this value added package is uninstalled all buttons works with WMP, but during the installation - do not.
  Illumination power button is not working do not by the press.

  This means support to toshiba button does not work properly with vista.

  I don't have these problems with XP

  Hello

  As far as I know, you can enable and disable the lighting in the BIOS.
  Go to BIOS and check if you can activate it.

  By the way; you said that buttons don t work with Vista.
  Have you tested this with Vista OS preinstalled Toshiba?

  You should do this!

• Zoo Tycoon 2 does not work on Vista 64 bit Ultimate

  When I start the game it gives an error saying that I have 0 MB of RAM installed.
  I also have a stub GPF.

  I tried to turn on DEP for all programs and added ZT.exe in exceptional cases.
  I edit "MSCONFIG" to show only 2 GB of ram.

  The issue of ram 0 MB goes, but I still I get a stub of protection error when I start the game.

  The thing is my old Zoo Tycoon 1 full collection works very well.
  ZT1 was released around 2001-2002. Whereas ZT2 came out around 2006.
  How can and more old-fashioned work fine but not the new version. I expect it to be the other way around.

  Someone at the helpdesk said MS the ZT2 game does not work on Vista 64 bit and I should install a virtual machine so that it can work in 32-bit.
  Is really the only way? Help, please.

  Hi orbit17,
   
  Thanks for posting on Microsoft Answers.
   
  Try to turn on DEP for "Windows programs and services only" and then restart the computer and check with the game.

  Here is a link to a KB which deals with the minimum requirements of the system and the compatibility problems with Zoo Tycoon 2: http://support.microsoft.com/default.aspx/kb/889368

  Please make sure that your computer meets the requirements for the game and that your computer is compatible

  Also how much RAM do you have installed on the computer?
  Did you add extra RAM since the purchase of the computer?

  You can also try to run the memory diagnostic tool by using the Windows Vista DVD.

  I hope this helps.
  Kind regards

  Niranjan | Microsoft Answers Support Engineer

• My microphone does not work on vista?

  My microphone does not work on vista? WATS the problem

  Hi AhsanShah,

  1. What is the brand and model of your microphone?

  2. what happens when you try to use the microphone?

  3. you receive messages or error codes?

  4. were you able to use the microphone before without any problem?

  5. you will remember to make changes to the computer before this problem?

  6. are you facing problems with other audio devices?

  You can check out the following link and check:

  Connect one microphone, music player or other audio device to your computer

  http://Windows.Microsoft.com/en-us/Windows-Vista/connect-a-microphone-music-player-or-other-audio-device-to-your-computer

  Hope this information is useful.

• Windows Easy Transfer 7 does not work on Vista

  Try to migrate date files and the configuration of Vista Home Premium (32 bit) to Windows 7 Home Premium (64 bit), Windows 7 laptop says to use a new version of Easy Transfer, tried to install that but it does not work. Starts then just seems to close, without indication of the error.

  Hi boris99,

  You can see the following thread, which presents a similar problem discussed.

  Windows 7 easy transfer does not work on Vista Home Premium 32

• Greetings Workshop does not work on my laptop with Windows Vista

  Greetings Workshop does not work on my computer acer laptop with windows vista. says that it cannot read a part of the program. How can I make it work?

  * original title - wishes workshop does not work on my laptop with windows vistaIdeas: insert an error code or give a brief description of what you are trying to accomplish or fix.__*

  Greetings Workshop does not work on my computer acer laptop with windows vista. says that it cannot read a part of the program. How can I make it work?

  Hey monkeymanknitting

  1st thing is to see if it is compatible with vista

  http://www.Microsoft.com/Windows/compatibility/Windows-Vista/

  If it's trying to do a right-click on the setup.exe then run as administrator

  If this is not vista compatible read below

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-compatibility-mode/

  Walter, the time zone traveller

• Built an MSI that does not work under Vista but works under XP

  We have built a MSI file that does not work under Vista but works under XP. No errors occur in the installation.  Running the installation "as Administrator".  But the application does not start without errors.

  You'd better choose to post your question in the developer forum. You can try the MSDN forums below, but you should definitely provide more details when you do.

  MSDN forums - http://social.msdn.microsoft.com/Forums/en-US/categories MS - MVP - Elephant Boy computers - don't panic!

• The Magentic program does not work with newer versions of windows

  Original title: Programas compatibility application applications app applications Juego Juegos Heredado USO caudal Cuelgue Cuelgues

  The Magentic program does not work with newer versions of windows

  Hello danielbrauer,

  The magnetic site says the requirements are for Windows XP or higher. However, it is not on the Windows Vista or the Windows 7 Compatibility Center.

  You can try the following to see if it will help with compatibility. If the program is not compatible, then you try to install and run the program in compatibility mode.
  Use the following steps:
  (1) right click on the program
  2) click Properties
  3) click on the Compatibility tab
  (4) select run this program in compatibility mode and select Windows Vista or other operating system, the program has been run successfully.

  Check out the link here: make sure to run older programs in this version of Windows
  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  If this does not help, you can contact the magnet to see if they have an updated version.

  Sincerely,

  Marilyn

• Speed dial does not work with Firefox 5 under Windows 7; How can I down Firefox 4.1?

  Speed dial Extension does not work for Firefox 5 under Windows 7.

  How can I downgrade to Firefox 4.1 so that I can use this indispensable Extension?

  This link will be fix Fast Dial for Firefox 8.0.1

  http://DL-Web.dropbox.com/u/12466346/speedfox.org/addons/fast_dial-3.5b1fixed2-FX.xpi

• Audio does not work with bootcamp drivers on windows 10 6 (tried on macbook pro 13 mid-2012). Is there a solution?

  Audio does not work with bootcamp drivers on windows 10 6 (tried on macbook pro 13 mid-2012). Is there a solution?

  You have all Audio devices in Device Manager? How Windows 10 has been installed on the Mac? The BC Assistant has been used?

• Want to dv6 Notebook PC 7226nr: scan fingerprint hp simplepass does not work after the upgrade to windows 10

  My HP SimplePass fingerprint reader does not work after the upgrade to Windows 10.  Is there a fix for this yet?

  I thought about it.  The upgrade to Windows apparently damaged 10 HP SimplePass software.  Once I uninstalled and reloaded the program, everything started working.

• Automatic update does not work. Unable to load Windows 7 or SP2. Error "cannot find the file specified."

  original title: automatic update does not work. Unable to load Windows 7 or SP2.

  XP Pro, automatic updates do not work.  Unable to load Windows 7 or SP2.  Error on SP @ is "cannot find the specified file.  Tried to load files noted missing for Windows 7, but was not able to load either.  All the other conditions to download files.

  Hello

   

  
  1. have you downloaded the stand-alone package for the service Pack 2 or are you using Windows update?

  2. you also try to install Windows 7?

  
  Method 1.
  Run Disk Cleanup and disable the security software and then try to install the same and check.
  See the article below for disk cleanup:
  http://support.Microsoft.com/kb/310312

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

   

  Method 2.
  If the problem still exists together own starting the computer and attempt to install the service pack.
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353
  Note: After that troubleshooting is complete, configure the computer to a normal startup. See the "steps to configure Windows to use a Normal startup state" section in the article above.

   

  Also, it is recommended to install the Windows XP service pack 3. Reference:

  How to obtain the latest Windows XP service pack
  http://support.Microsoft.com/kb/322389

   

   

  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• I already have an annual subscription to the export of Adobe and Adobe track, but it does not work on my new computer (Windows 10). Help, please.

  I already have an annual subscription to the export of Adobe and Adobe track, but it does not work on my new computer (Windows 10). Help, please.

  Look under Tools.

• CD/DVD does not work under Vista

  I have a laptop Compaq Presario F700 under Windows Vista Home Premium.  For the first year and a half i have owned my laptop, my CD/DVD drive worked perfectly.  A month ago it has stopped working completely.  It does not appear in my computer or Device Manager and it does not open.  I don't think that the drive is defective because it will open when the first Compaq screen shows up, but when the Microsoft Corporation loading screen is up, it stops working.  I used Google to good use, but none of the solutions I found worked.  I tried to delete upper and lower filters but they aren't there, and I tried all the solutions Microsoft Fix - It nothing works.

  Any help is greatly appreciated

  Hello

  Reader might indeed have gone wrong.

  Check with support from Compaq and their forums for known problems.

  Compaq - Support
  http://www.Compaq.com/country/cpq_support.html

  Compaq (HP) - Fourms
  http://h30434.www3.HP.com/PSG/

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.