NETGEAR D6000 (Possible Firmware Bug)

Hello

About a week ago, I bought a Netgear D6000 - 100AUS ModemRouter. I have it configured manually and everything went well, I was online in 10 minutes. After completing the configuration, I noticed the Firmware update notification on the WebUI devices. I've updated, everything went well.

Probably the next day, I got home to discover most (if not all) connected devices had issues. The DNS servers configured in the modemrouter were not meet. I think actually fairly quickly that it could be a problem with the firmware up-to-date mixed with the old configuration data saved in the device, so I restored the factory setting and set up again (this time with the Wizard). No problems.

I get home today, same problem. I discovered that the DNS servers configured in the modem (Googles DNS 8.8.8.8 and 8.8.4.4) were not meet. I can work around this by assigning the DNS server on the computer or the device. DNS servers responded very well, so it was something to do with the modem.

When this problem occurs, the routers WebUI responds very slowly. As I speak of ~ 5 minutes before I get a login prompt. And it's also across all devices. So this deffinately not a line problem, it seems more like a bug in the firmware. I was talking to a technician on the live chat and he advised me to post here. I hope that someone will see it and maybe work with me to resolve the issue.

In addition, it is pretty weird. I have an old ISP Telstra has published ModemRouter, it is a Netgear DEVG2020 and looks like it is running similar firmware. That's what I had before, I got off a friend after my prior ModemRouter (TP-Link (A) has been damaged. I couldn't make it work like a ModemRouter and assumed that it was because I didn't have a Telstra business account (it is what it was for). So I got an old Telstra Modem, I have had and used the DEVG2020 just a router. And he was constantly the same f r e a k I n g question. For a long time, I had all devices in the House that is configured with its own DNS to work around him. So yes, I don't know if this information will help you. All I can think is a problem of firmware. But I have no idea. I intend on the Netgear to return next week, but I'm happy to stay with her a little more if a firmware update on the way.

Thank you!

I got it exchanged for a Technicolor. No problem now. Deffs a firmware issue.

Tags: Netgear

Similar Questions

  • Page setting for the Port SG200-26 1.4.0.88 corrupt firmware / Firmware Bug?

    Hello

    After the upgrade to 2 switches SG200-26 version 1.4.0.88 firmware, I am unable to set up the CONFIGURATION of the PORT page.

    See the attached images.

    Must be a bug in the firmware.

    Please notify for the solution!

    Hello Dimitris,

    According to the instructions mentioned in the release notes, the downgrade is possible. Please you have the boot updated as well (it is a part of the firmware package)? (answer to this question does not depend on possibility of downgrade).

    What about other browsers, don't know you the same problem with Firefox or Chrome?

  • XF270HU Overdrive and firmware bugs

    I have a few things I need addressed.

    The XF270HU uses the same panel as the XB270HU, the AUO - M270DAN02.3. The equivalent G-Sync monitor has only a displayport.

    So why the XF270HU cannot use Overdrive when connected through DP. He can use it to HDMI, but I do not use HDMI for FreeSync.

    Bugs in the firmware:

    (1) the indicator number of B gain is not up-to-date. I just need what the value is in the gain G. It adjusts the actual color not only the indicator. See http://i.imgur.com/I3J3x6h.jpg

    (2) the settings that are saved in the slots of game Mode 1,2,3 are not saved when the monitor sleeps / turns off.

    erbury1983,

    Sorry if I wasn't clear. Overdrive is 'set' with Freesync enabled on the Displayport. This is the reason that overdrive is not configurable in the OSD menu. He was already working.

    Freesync does not work via HDMI, so Overdrive can be enabled/disabled with HDMI.

    Cory

  • New Firmware Bug - 1.02.26

    To Sandisk...

    Have updated the new firmware and have found a bug. Earlier, I tried to delete a video. The video has been removed, but the entry (name) was still in the list. When I tried to play the deleted video once again the player has frozen. Had to do a hard reset to turn off the player. Only an update of media corrects this.

    For me it should have been found and corrected until the firmware has been released. Hope this can be fixed quickly. THX.

    oobergeek wrote:

    To Sandisk...

    Have updated the new firmware and have found a bug. Earlier, I tried to delete a video. The video has been removed, but the entry (name) was still in the list. When I tried to play the deleted video once again the player has frozen. Had to do a hard reset to turn off the player. Only an update of media corrects this.

    For me it should have been found and corrected until the firmware has been released. Hope this can be fixed quickly. THX.

    [SOLVED]

    Backup everything on your drive and format the drive again using the FORMAT command in the menu of settings on the "rocket". Put the content back on your rocket and the problems disappear.

  • Fragment of IP problem PS3 (netgear D6000)

    Hey guys, I recebtly was seen this problem on my PS3 where I can't play online and I have test fo a PS3 with an error that comes up saying "the router in use does not support ip fragmebts. I tried all possible solutions and my router is brand new and foesnt used to do this error, so if anyone has a solution that they thibk will help with router thia, I'd appreciate it a lot, thanks!

    Sorry, I'm using PPPOE, PPTP, L2TP, it is said he turned on!...

  • The SG300 1.3.0.59 firmware bug

    Hi all, I am having trouble with this firmware in a SG300-28 switch. In fact the DHCP server, a new feature in this version of firmware, does not work properly. DHCP static public reservations do not work: customer ID and MAC address are not recognized properly, and the DHCP server assigns the first free IP address in the pool, rather than reserved.

    If Cisco engineers reading this, plese fix.

    The issue is well documented in this thread, and it is present in the 500 series too:

    https://supportforums.Cisco.com/message/3941468#3941468

    Any help is appreciated.

    Thanks, Andrea

    Hello Andrea, the command is available on the global config

    Configure the terminal

    The dhcp server IP

    If the command is not available, it is because you do not use 1.3.0.59 at least. I'm under 1.3.0.59 and 1.3.0.62 and two software images have the command available.

    -Tom
    Please mark replied messages useful

  • CWA ISE 1.2 Patch 7 possible comments bug

    Just upgraded an ISE implementation to patch 7 and discovered the patch broke comments CWA portal the wireless. I have not tested the wired CWA but wireless is down.

    In summary, the redirect works fine, but when you enter valid credentials comments nothing happens including no newspaper in the ISE. If you enter the credentials that do not exist in the comments group, you get an authentication failure and the corresponding journal. As soon as I drove back to patch 6 everything worked again.

    If TAC see what engineers do not hesitate to continue - I would connect a case but the kit is NFR and I can't be bothered going through the process of logging to a job on the NFR kit.

    Please visit CSCuo16503

  • Possible a bug of cascading select list

    Hi people,

    I created a dynamic action "onChange" in a page called "P5_COD" element Always of value of "P5_COD" changes, it runs the PL/SQL code above to fill the page elements with data from database:

    Select

    PERIOD,

    BEGIN_DATE,

    END_DATE

    in

    : P5_PERIOD,.

    : P5_BEGIN_DATE,.

    : P5_FINISH_DATE

    Of...

    BEGIN_DATE and end_date are page elements "selection list. They are "Cascading LOV Parent article (s)" of the PERIOD (select list too).

    The problem is: 'onChange' dynamic action doesn´t work to load the elements of page BEGIN_DATE and end_date.  BEGIN_DATE and end_date loading default data, not the data of database.

    Any idea?

    Thank you

    Bsalvador

    Bsalvador

    First of all the code you listed does not change the value of objects client only in session state-side. In other words only on the server.

    Use a dynamic action of type 'Set value' to change the value on the client side.

    Then change the value of P5_PERIOD will trigger the change of the P5_BEGIN_DATE LOV: P5_FINISH_DATE and the values of these elements are initialized to null (client side only).

    In a similar challenge to define the value of the mother and child at the same time, I'm done setting the value of the child element in a hidden item. And on the afterrefresh event of the child, the value is set to the child.

    See this demo , I realized for the challenge.

    Nicolette

  • Possible opacity bug

    Or my lack of understanding.

    The rectangle on the stage. Convert to symbol. Name it "box". Action for the click box:

    $(e.target).css("opacity","0");

    Another rectangle with script inside:

    var box = sym.$("box");

    Alert (Box.CSS ("Opacity"));

    1, he warns that it is visible or not.

    For me.

    Hey John,

    When you use e.target opacity is applied to the div that you select. A symbol is just a fancy div, it follows the same structure as HTML, which means that the clickable area for the symbol is the layer of lastmost of your object, and e.target seize some div that you select.

    Say you have 4 rectangles within a symbol (let's call it four_rect_sym) and used your code. At the level of the stage, you apply $(e.target)... css as a click to four_rect_sym event, but if you click on one of the rectangles, the code will hit the rect and not necessarily the entire symbol.

    In this case, you would be better reference the element symbol if you want than the opacity to be applied to the symbol. SYM.$("four_rect_sym").CSS ("opacity", "0) Yes;

    Sarah

  • Address MAC WUMC710 problems when using MAC filtering

    I recently bought the point WUMC710-HQ AC wireless to connect to my router EA6500.  Generally, the WUMC710 seems to work.  I was able to connect to the router wirelessly on the 5 GHz band and flow EA6500 a NetFlix video with no problems.

    However, there is a major problem that comes makes no logical sense for me:

    When I turn on the wireless MAC address filtering of the EA6500, the WUMC710 does not connect to the EA6500router.

    Yet, I 8 eight other wireless devices on my network which connect very well to the EA6500 when the MAC address filtering is enabled.  Thus, the question seems to outright to WUMC710.

    The address printed on the product shipment to the ends of the box with numbers XX:1 d.

    This address matches the address printed at the bottom of the WUMC710 MAC. (normal)

    My EA6500 router recognizes this MAC address as the correct MAC associated with the WUMC710 (when MAC filtering is enabled).  But as soon as the MAC filtering is turned on, the WUMC710 does not recover to the router. (I checked the MAC address, that I walked into the filter at least a dozen times, and she entered correct - but all my other wireless devices connect OK).

    This is a point that seems strange on the MAC address associated to the WUMC710:

    When I am able to connect to the WUMC710, State--> tab Device illustrated the right address MAC I use to filter.  But when I check the status--> network wireless tab, it displays the MAC address wireless like: XX:1E.

    So, now, I try to get into this 'new' MAC address in the MAC of the router EA6500 filter just to see if it will work with this MAC address "without papers" of the wireless device.  At first, it seems to work.  The WUMC710 of blue light will come on indicating that a wireless connection has been established with the router.  BUT nowhere in the web interface of EA6500 says that the WUMC710 has a DHCP connection with the router.  And, if I connect my laptop directly to one of the WUMC710 Ethernet ports, there is no connection to the Internet via the router (as long as the MAC filtering is enabled).

    I did Factory Reset a few times now and no difference.

    Firmware is the factory default - it is there no update of the firmware available, yet.

    I spent several hours trying to understand what is happening with this device and go round and round in circles in trying different things.  I can only conclude WUMC710-AC is defective, or requires a firmware fix - but none are available.

    Am I missing something here?  Or Cisco does suggest a fix for the firmware for the WUMC710-AC?

    (I don't really like to run my network wireless MAC address filtering active wireless.)

    Kind regards

    Jeff

    Cisco-Linksys 2 support with me today confirmed what I thought it was a possible firmware bug, is actually undocumented features of the WUMC710, by design.  And they agreed that they will update the documentation for WUMC710 to take account of these features and system requirements.

    Just like a reference to new users of the WUMC710 AC wireless bridge, I will summarize here the requirements for WUMC710 wireless bridge to work properly with the router, Cisco-Linksys AC6500 Wireless, when MAC filtering is enabled.  If all goes well, this information will save some other people the many hours I spent to dig through the documentation and the FAQ to try to understand what it takes to connect successfully devices behind the bridge of WUMC710 to the AC6500 router - when the MAC address filtering is enabled:

    The following MAC address must be entered in the AC6500 router table filtering of MAC addresses to connect devices behind the bridge WUMC710 wireless to the Internet:

    1. The MAC address of the bridge wireless WUMC710 wireless.
    2. The address MAC LAN of the WUMC710 bridge.
    3. Addresses MAC LAN of each LAN device connected to the LAN Ports of the WUMC710 bridge.

    That in a few words.

    With this information, devices behind the WUMC710 of Internet connection (with the active MAC filtering) is a breeze.

  • TimeCapsule Firmware update 7.6.4 is not possible

    on my Timecapsule is not possible firmware update.

    Airport utility shows me that there is an update, but I have no button to update.

    Hold down the option key and click two times on the base station. before an option there will be updated to version, click on it.

    The system will reboot and firmware will be updated.

  • Not possible to burn a CD with Windows Media Player

    Windows Media Player in windows 7

    All of a sudden CD burning became a problem. After I insert a disc in the drive, a message appears indicating that I need to insert a disc or another message will specify that windows does not detect the cd or windows media player does not detect the disc. I don't know what is happening. I need help!  Thanks, Lindalooloo

    Hello

    Close WMP and all players and burn programs. Click with the right button on taskbar - task manager - process
    Tab - search for WMPlayer.exe and if it COMPLETED the PROCESS on this subject.

    Now stick to a CD and what happens?

    --------------------------------------------------------------------------------------------------------

    Step 1: Please do all the same underneath if you did some before as is often total
    a process that solves the problem.

    Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
    Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
    RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
    below.

    Then, work your way through these - don't forget the drive might be bad, could be a coward
    cable or slight corrosion on the contacts (usually for a laptop) and other issues.

    Your CD or DVD drive is missing or is not recognized by Windows or other programs
    http://support.microsoft.com/kb/314060 - a Mr Fixit

    Try this fix manually if the Fixit 314060 does not work
    http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

    Your CD or DVD drive is missing or is not recognized by Windows or other programs-
    a Mr Fixit
    http://support.Microsoft.com/kb/982116

    The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
    for Windows Vista
    http://support.Microsoft.com/kb/929461

    When you insert a CD or a DVD, Windows Vista may not recognize the disc
    http://support.Microsoft.com/kb/939052

    Your CD or DVD drive cannot read or write media - A Mr Fixit
    http://support.Microsoft.com/GP/cd_dvd_drive_problems

    CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
    Vista installation after booting from the DVD (AHCI)
    http://support.Microsoft.com/kb/952951
    Drive CD - R or CD - RW Drive is not recognized as a recordable device
    http://support.Microsoft.com/kb/316529/

    Hardware devices not detected or not working - A Mr Fixit
    http://support.Microsoft.com/GP/hardware_device_problems

    Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
    ends. Remove and replace, do not just tight. For laptops, you can often clean power and
    contacts data with a pencil eraser.

    Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
    manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

    ===============================

    Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
    Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
    do it right.

    Did you follow the Troubleshooting Guide for the reader who still does not work? There are
    the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

    Check with your Maker system and a device for the two possible firmware updates and
    the correct registry entries for your car.

    Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
    as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
    the parameters.

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

    -----------------------------------------------------------------------

    You can probably find more info here and maybe even the exact registry for your CD/DVD settings
    drive from someone with the same model.

    Forums - a lot of expert real help
    http://Club.myce.com/

    CD/DVD units
    http://www.myce.com/storage/

    Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
    nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

    DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
    devices and their properties in flat table, instead of the tree viewer
    http://www.NirSoft.NET/utils/device_manager_view.html

    I hope this helps.

    Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

  • 1.1.7 BIOS bug on XPS 13 (9350)

    Hello

    The latest BIOS 1.1.7 on the XPS 13 (9350) which increases the life of the battery for Windows users does not for Linux because of the SSD NVME users not be allowed to access the standby modes.

    At the start, several from ACPI error messages occur (see http://pastebin.com/8E6iXKMM ), here are a few:

    [0.155273] ACPI FADT says the system is not support PCIe ASPM, so turn it off

    [0.185298] [firmware bug]: ACPI: _OSI (Linux) ignored BIOS query

    [0.203571] ACPI Exception: AE_NOT_FOUND, while assessing sleep state [\_S1_] (20150930/hwxface-580)

    [0.203580] ACPI Exception: AE_NOT_FOUND, while assessing sleep state [\_S2_] (20150930/hwxface-580)

    ACPI [0.850917] PNP0C0B:00: cannot change to D0 power state

    ACPI [0.870806] PNP0C0B:00: can not the crossing of (unknown) D3hot

    Glances at Arch Linux forums and reddit/r/Dell, it seems that Linux users have not benefited from the last update of the BIOS. My system boots also all other time and the case ends with a black screen.

    No matter what other updates BIOS that we can expect to solve these problems?

    Thank you very much!

    more info about 1.1.7 buggy bios bugzilla.kernel.org/show_bug.cgi

  • Firmware Update Notification printers to Laser - real or HOAX?

    I received an email listed starting from: Hewlett-Packard [email protected] that indicates an update of the firmware is strongly recommended for laser printers prevent malicious activity. I find nothing at HP about it. Is this update for real? I don't want to click on the link (Firmware Update enabled by default at this link):
    http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c03102449). ) and end up being a victim of phishing or worse. Here is the content of the email:

    Dear Dear customer of HP's LaserJet.

    HP recently announced the possibility of a certain type of
    unauthorized access to some HP LaserJet printers. The potential
    This unauthorized access is for peripheral on a LaserJet
    Public Internet without a firewall, or for LaserJet devices in one
    private network, if a malicious effort is made by a party on the
    private network to change the firmware of the device.

    If no customer has reported to access HP, HP has
    built a firmware update to minimize this problem. To get the
    latest firmware for your product, access bulletin HPSBPI02728
    SSRT100692 - some printers HP and HP Digital Sender, remote control
    Firmware update enabled by default at this link:
    http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?objectID=c03102449

    Then:
    1. find your product in the table
    2. If an update is available, you can click on the embedded link.
    It will take you directly to the web page where the Firmware
    update is available.

    Update the firmware of your product by following the instructions included
    in the Readme file for the firmware image. If you are a HP
    Managed Print Service customer, please contact your managed
    provider of printing services, which cannot install the update of the firmware
    For you.

    Because the safety of our customers is paramount to
    HP, we reiterate our recommendation to follow best practices for
    mounting devices. This includes placing them behind a firewall printers
    and, when possible, firmware remotely disabling download capabilities
    printers exposed.
    Additional information is available at http://www.hp.com/go/secureprinting

    Hello:

    I would contact HP technical support on this issue, if you are not very sure.

    Support bulletin seems legit to me.

    As I was connected the HP support Forum, this bulletin web page acknowledged that I signed.

    If it wasn't true, I doubt that this would have been possible, as these pages are tightly linked through HP Passport sign in System.

    Also look at the list of models to ensure that yours needs updating.

    If you decide to run the update, make sure that you follow all the procedures to the letter.

    An update of the firmware which has gone wrong will permanently damage your printer and most likely makes it unusable.

    Paul

  • Message at startup: DO NOT POWER OFF SCAN 50L5333DG

    Dear jury,

    Here we have a 50L5333DG LCD.
    Check regularly to be able to we have a black screen with the message:

    DO POWER OUT

    SCAN

    Progress bar from 0% to 100%

    It never end.
    Restart TV is usually ok or when unlucky give the same screen.

    Is it possible a bug in FW firmware: v1.0.5.07 (MP)?

    We do not see the firmware update.

    Anyone's ever seen this problem?

    Kind regards.

    Hello

    Have you tried to reset the TV?
    If this is not the case, try.

    Retune the TV tuner, and then test the functionality of TV once more.

    Also, check the user manual page63
    http://www.Toshiba-OM.NET/LCD/PDF/English/L5333-405058-English.PDF
    You will find info how to disable the automatic update of firmware and installation

    But if the message will not go away, contact the service point in your country to check if a hardware problem could be the reason of this message.

Maybe you are looking for