Netlogon does not not after the clean boot

Similar Questions

• After the clean boot get error loading awuspn.dll and load yabbyx.dll error. The specified module could not be found

  Hi Thahaseena,

  Thank you for helping! Finally I solve the problem of the error1324.but there were other questions come, after I did the clean boot and restart the computer then log, the window came several times put warn against the "Rundll":) 1 awuspn.dll 2) error loading yabbyx.dll loading error (both happened to uo WARNING several times). And boths display the message "the specified module could not be found. I tried to restore the computer to the State at the beginning, but it has no will to restore before the own boot.would you please help me to solve this problem again?

  Thank you

  Well, I want you to do is run MalwareBytes.  You say you already ran MalwareBytes after the clean boot, and then tried to reload regularly?

  Whatever program you have downloaded to fix the missing image file sounds like he came by malicious software.  What is the name of this program.

  --
  Gina Whipp
  Microsoft MVP (access)

  Please post all responses on the forum where everyone can enjoy.

• Touchpad no longer works after the clean boot

  Own, I started my laptop today, following the steps on http://support.microsoft.com/kb/929135. After the first reboot in clean boot my laptop touchpad scroll bar stopped working. I can now scroll using only the arrow, or quiet mouse clicks on the arrows at the end of a ScrollBar to the screen. In addition, I can't select any text with my touchpad now. All this happened after the boot process. What has gone wrong? How to fix?

  Original title: scrolling Touchpad no longer works after the clean boot

  Hi lauranne.

  What is the brand and model of the computer?

  I would like to put the computer into normal mode and check if your able to use the touchpad.

  See the section "How to reset the computer to start normally after a boot minimum troubleshooting"

  How to perform a clean boot in Windows
  http://support.Microsoft.com/kb/929135

  If you still have questions, please refer to the article to give below, and follow the instructions.

  Mouse, touchpad and keyboard with Windows problems

  http://Windows.Microsoft.com/en-in/Windows/help/Mouse-touchpad-keyboard-problems-in-Windows#V1H=tab01

  Hope this solves the problem. If the problem persists, you can write to us and we will be happy to help you more

• Impossible to pass to windows 8.1 even after the clean boot

  Hello

  I just bought laptop Asus S400C with pre-installed Windows 8 unique language. I wanted to update Windows 8.1, but after two weeks of frustrating, I can't still day. I get the message "error 0x80072f78".

  I tried to install other applications, but each only apps, I tried to download failed and gave me the same error message. Strangely, I can update applications that was already installed, as Adera, music, maps, photos etc. I can just download and install the new.

  I tried to empty the cache to store, I adjusted the time, restore to factory setting, installed the latest Windows updates, but still nothing works.

  My last attempt strives to upgrade in clean boot environment, but the store cannot connect to internet. I ran the network troubleshooting and the result was "the remote device or resource does not accept the connection.

  Is there anything else I can do to update, or at least to know what is the problem with my settings so I can fix it?

  Thank you much for the help.

  Best regards

  I ended up working there. It has something to do with IE. I have reset the Internet Explorer settings to their default conditions and now I can update.

  Thank you very much to all those who responded. You are the best.

• How do I restart the computer after the clean boot

  Hi, I need to know how to reset my computer to start as usual after a clean boot troubleshooting, to reset the computer as usual, thank you very much.

  Hi Eric,.

  To help you with your concern on how to reset after you perform a clean boot, please specify below:

  • You try to turn on and off your computer?
  • What version of Windows are you using?

  Kind regards.

• The mouse will not scroll after the clean boot

  Hello!

  I just had perform a clean boot, because I had problems to connect to the internet, but after that (and re - start Windows normally later) my touchpad doesn't let me scroll upwards or downwards. It's as if this feature has completely disappeared. What can I do about it?

  I use Windows 7 on a Toshiba Satellite C855 - 10 p.

  Thank you!

  You may have inadvertently disabled the software Toshiba Touchpad controller.  You could go back to MSCONFIG to check if it is listed.  Or you may need to download again on the Toshiba site.

  You can also use system restore to restore the registry in how it was previously (in recent days).  Learn how on this in the option #1 here.

• Digitizer does not, after the update to windows 8

  Hello

  I bought myself a x 201 tablet a few months back, because I thought it would be great for taking notes during my studies. And I was right

  But after I upgraded my windows 7 to windows 8 when it was released last Friday, my scanner will not work correctly. It seems that the stylus is not really recognised as a pen. There is no pressure at all sensitivity, and clear with the back of it does not work either. It seems the wacom drivers aren't there.

  I tried to download various drivers for it and set up of the digitizer, but nothing seems to do the trick.

  Hope someone can help me, because I really need to be able to take digital notes soon.

  Back to the page of Wacom and download the scanner driver:

  http://www.Wacom.com/en/support/drivers

  Select tabletpc and win 7.

• Does not after the resumption of the hibernation

  Hello. I have laptop very slow and unresponsive liked after the resumption of the hibernation. It lasts up to 15 minutes after the resumption and the HDD led is lit constantly during this process. It's a much slower RESUME that my very old laptop with Pentium M processor and hard drive slow 540 RPM.

  What can we do about it.

  Laptop: Lenovo X 220, core i5, 8 GB RAM, 7200 RPM HARD drive. Windows 7 Pro x 64.

  I have a kind of guess the reason - a lot of RAM on x 64. Hiberfil large file. BUT I do not notice this behavior on any computer I've owned or worked on. That they can resume more slowly or more quickly, but after the restart they are responsive as they where before hibernation. I'd rather have it on the laptop too. This laptop isn't, she continues to make the reading of the HARD drive making it absolutely unusable during the process of tis.

  Thank you.

  Thanks again.
  The process that caused strange behavior has been PWMTR64.dll which is a ThinkPad Power Manager background service. Turn it off solved the problem. Resume from Hibernate is normal and all programs are loaded immediately after the resumption. Haven't noticed any decline in the power management feature after the deactivation of this startup item in msconfig.

• Apps not showing Panel does not after the installation of new

  Hej guys,

  I changed the computer today and installed creative cloud on it. I can connect and all goes well until. But I can not install all the apps in cloud creative, the applications Panel will not appear, and any time I click on 'install adobe apps.

  nothing happens. Someone at - there a solution to this problem?

  I tried to rename the database in order to get a new one, I tried the cleaning tool, I ran it under administrator privileges... I don't know what to try anymore.

  Thanks in advance

  Alex

  (Win 7, lenovo W541)

  Hi Alex,

  Please refer to the threads below where this issue has been addressed:

  CC for desktop computer has lost the applications Panel. How to fix this?

  Missing Creative Cloud Desktop applications tab

  Re: creative cloud computer desktop is not displayed Panel apps?

  Kind regards

  Sheena

• Control does not after the exit of the loop of event handler

  My application brings together several controls user input.  When the user presses the OK button, it exits the event handler and the treatment.  During the treatment, it is not able to read the new values of the controls.  And in fact is no longer meets the stop button.

  When executing the attached VI, you will find that you can press the button of the switch and the LED indicates the status of the switch (this is my input from the user).  Now, press the OK button.  If you press the switch button, you will see that it works only once.  In addition, the stop button unresponsive to user input.  If you do not press the button, the stop button will cause the 2nd loop exit.

  Why the 2nd loop is unresponsive to the switch?

  It is a simplified version of my application in which two loops are separate from the States of my state machine.  There are several other States as well.

  The case of the event of the "change value" event has the property set to lock the Panel before the VI when the event is raised until the case of the event is over.

  Because the left while the loop is running not but the structuer event is always active FP everything is locked.

  Uncheck this option in the "edit event".

  Tone

• Missing msconfig in Windows 8 after the clean boot; No app/search results

  I have a HP Pavilion Windows 8 running. I booted safe mode and did a clean boot to try to correct the error 'Failed to connect to a Windows Service' that I had received at startup. After you disable programs in MSConfig, I restarted in normal mode. I did not receive the error message "Unable to connect" and went to restore my settings after the cleanup starts, but is no longer to access or find MSConfig. If I search for it, there is simply no result. This happens both in Mode safe and in my normal desktop. Does anyone have advice?

  Thank you.

  Hi Paige,

  I suggest you to check what is happening when you try the following.

  • Press the Windows key + R, to bring the box run. Type msconfig in the box and press on Enter.

  Check what is happening.

  • If you are still unable to open the System Configuration window try to open by using the following steps:

  Go to the Windows Explorer window by pressing E + Key of Windows. Click the drive where the operating system is installed. Click the Windows folder, click the System 32 folder. Now on the type of search msconfig.exe box check if you can find the same. If so, double click and check if it opens.

  Retrieve the required information so that we can help you further.

• Skype logging does not after the update: no connection?

  Same question but Skype update itself and after that do so won't save as it says no connection... and Yes, I have a great connection... sigh...

  This message was transferred from its previous location to create his own new topic here; his subject and/or the title has been changed to differentiate the position of other requests for information and to reflect the content of the post. A link to this message appears when the post was initially added.

  I think that Skype will not often connect after update, goes just round.

  I right-click on the icon menu, I chose to LEAVE SKYPE.

  I then open Skype again and it connects without problems,

  Quirky, but true!

• photo editor app now available, but does not, after the last new update

  Hi all

  strange experience that I wanted to stress with you all.

  I just had an update (this morning) to What's New build 3.0.A.0.2

  After you install this hotfix / update, then told me that "editing" is available for download. Build is 5.0.A.0.12

  I'm worried I have not had this app on my phone before - archive system applications reveals this is a new installation, rather than an update of an existing application.

  Also, I did not how to make it work, because there is no app on my home screen shortcuts. The app is not visible in the drop-down list app (when adding new items to my homescreens) either. Nor is the application in the list of main application (accessed with the key 6 points to the center of the permanent Panel shortcut on the home screen).

  I even tried to use a very useful app "quick shortcut maker" and even if I find photo editor in his list of activities, when I test the generated shortcut, unfortunately, I get "the photo editing software has stopped."

  Any ideas?

  I have a few apps disabled, so made photo editing have known all the dependencies?

  EDIT: I tried erase the photo editor and don't restart - no change.

  See you soon,.

  Gary

  Hi MyAliasIsGary

  Photo Editor is a system application only, it can be used when editing photo app to your Album or Photo. For example, if you go to Album > tap a photo > press the bottom icon that looks like a pencil on paper > Photo retouching tap.

• My acer aspire one does not start. the scrolling windows screen, then screen turns off. logon appears and resets, sys

  My acer aspire one does not start. the scrolling windows screen, then screen turns off. but after a long time (45mins) the login screen appears and d sysytem restarts. I have a multi boot with 2 installations of xp, and this happens with both bones. not able to access my sys to bak - up also. all f8 options were considered, but no use.

  I have some bad sectors on d: (have total 3 drive partitions c:, d:, e: with xp on c: and e :))
  the sys wud show a blue screen and reboot when certain file wud b accessible on d:... now the sys cannot start all... pls help...

  Hi Srimotu,

  ·         You get an error message or an error code?

  ·         Have you made changes on the computer before this problem?

  Follow these methods.

  Method 1: Try starting it in last known good configuration.

  http://support.Microsoft.com/kb/307852

  Method 2: Try to start in safe mode.

  http://support.Microsoft.com/kb/315222

  If you are able to boot into safe mode, try a clean boot.

  http://support.Microsoft.com/kb/310353

  Note: After the clean boot for troubleshooting, return the computer to a Normal startupmode.

  Method 3: Disconnect external devices such as printer, scanner, etc. and try to start.

  Also disable automatic restart in the event of system failure

  http://support.Microsoft.com/kb/307973

• After trying to use Fix - It to fix XP does not recognize the USB key, had to go back to the last good configuration and computer charge always VERY slowly. What's past and how to fix it?

  Windows XP SP3 has ceased to recognize a USB flash drive and card reader that he always acknowledged in the past. I tried to use Fix - It to correct the problem. Fix - It is then asked to restart the computer. When the computer is restarted, it would not load. After waiting almost two hours, I restarted with the last good configuration. Then reloaded, it took nearly an hour. Before using the Fix - It, the computer was loading in less than five minutes after a reboot. There a lot of things on it. What can I do now to solve the problem posed by Fix - It and also correct the problem with XP recognizes does not flash drives?

  Hi lental,

  ·         Have what fixit you tried?

  ·         Do you have an error message when you try to start the computer in normal mode?

  ·         What is the brand and model of the computer?

  ·         You're able to boot in safe mode?

  Follow these methods.

  Method 1: Follow these steps:

  Step 1: Start the computer in safe mode and check if the problem persists.

  Step 2: If the problem does not still in safe mode, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click on restart to restart the computer.

  Method 2: Follow the steps in the article.

  Advanced Troubleshooting for General startup problems in Windows XP

  Method 3: Follow the steps in the article to resolve the problem of USB.

  A computer that is running Windows XP cannot detect a USB, an Apple iPod flash drive or an external hard disk drive

  Advanced troubleshooting tips for General USB for Windows XP problems

  For reference:

  How to make a computer faster: 6 ways to speed up your PC

  Slow PC? Optimize your computer for peak performance