Netprotl-test turns to purpel after upgrading the client to v4.50

We started to improve our BigBrother Client on servers of 4.20 to 4.50.

But after that the new customer has started up 'netprotl' is still purpel.

Servers using the 'old' version gives us a green screen.

Netprotl looks like this Pentecost empty status for all * claimant - the same results for v.4.20 and v.4.50 but in 4.50 it will be after 30 min chang in purpel:

Name ConnectionlessService GuaranteesDelivery status, SupportsBroadcasting SupportsEncryption
False false true-false MSAFD Tcpip [TCP/IP] OK
MSAFD Tcpip [UDP/IP] true false true OK false
Fake fake OK of the true-false MSAFD Tcpip [TCP/IPv6]
MSAFD Tcpip [UDP/IPv6] true false true OK false
RSVP TCPv6 service provider false true false true
True false true false RSVP TCP Service provider
RSVP UDPv6 service provider true false true true
True true false true RSVP UDP Service Provider
Wrong wrong VMCI sockets DGRAM real fake OK
Wrong wrong VMCI sockets true false STREAM OK

What can we do about it?

He gives us "noice" in our point of view bb2.htms.

Furthermore, we are not really interested in seeing the results of netprotl at all since we have other people this part of monitoring servers.

Hmm, found!

Never seen before pulldownlist.

But we had only to go to the party 'set test' in the client, choose netprotl and set it as 'Evergreen '.

The new version had 'disable '.

Tags: Dell Tech

Similar Questions

  • After upgrading the bios to version 2.13 t430u, it freezes at black screen

    Hi all

    After upgrading my lenovo T430u bios to version 2.13 it freezes at a black screen, and windows does not load. My machine has windows 7 Professional and the only way to make it work is to reset the bios settings, but after awhile, it freezes at black screen and windows 7 does not load again and need to reset the settings of the bios once more. Hope someone of you gyus can help me with this since is very frustrating.

    Lenovo has released a BIOS updated for ThinkPad T430u that resolves customer reports of black screen after upgrading the BIOS.

    CHANGES IN THIS VERSION

    Version 2.15

    [Problem resolves]

    -Fixed a problem with the black screen after BIOS update

    -Fixed a problem with the gray screen when turn off Bluetooth in the BIOS Setup

    V2.15 BIOS can be downloaded here: http://support.lenovo.com/us/en/downloads/ds031724

    Thank you

  • Bluetooth not available after upgrading the BIOS on HP g62-a60EM

    After upgrading the BIOS, I can't use bluetooth, as I can't see it in Device Manager. I've updated the BIOS with the file sp55430 on the support site. Battery is not holding a charge, it runs out after about 30 minutes. Back BONE back then now, I can use bluetooth. My OS is Windows 7 Professional 64 - bit - Slovenian.

    If anyone can help?

    Kind regards

    Dragan

    Hello

    Try to update the BIOS again. After that make sure that the wireless and Bluetooth lights is lit. Also download and installed the drivers of bluetooth and verification.

    After the BIOS also check in BIOS if Bluetooth is turned on:

    Menu of the System Configuration > Integrated device options > Enable/disable integrated Bluetooth Radio device

  • Satellite L650d-120 does not load after upgrading the BIOS 1.7

    After upgrading the Bios up to 1.70 my laptop is no charging current, but always works to the AC adapter.
    Can I do something on my own?

    Hello

    First of all, you should set the BIOS to default settings and need to save the changes.
    You must also leave the AC adapter plugged into the laptop for a longer period of time.

    Welcome them

  • Windows Update service will not work after upgrading the hard drive

    I'm running Windows Vista 64 bit, Home Premium SP2 with 8 GB of ram. I recently cloned my hard drive OEM of 500 GB, 5400 RPM Toshiba MK5055GSX via a standalone, dual drive bay dock for upgrade to a 750 GB, 7200 RPM, Western Digital WD7500BPKT. Since the clone/upgrade, Service Windows Update does not work and gives the message: ' Windows Update cannot currently check for updates, because the service is not running. " You may have to restart your computer. "And Yes, I checked and everything related to Windows Update seems to be 'turned on' or well defined, but the service will not work. Notes; Windows Update still works with the player "OEM", it is only the new WD drive that has the problem. Thanks in advance for any help or suggestion on getting this problem is resolved.

    This fixes my laptop http://www.realworldrobotics.com/troubleshooting-help/windows-7-64bit/windows-update-service-not-running-after-upgrading-drive

  • No DVD drive after upgrade the hard drive on Satellite Pro A100

    Shortly after upgrading my hard drive, optical drive has stopped working, now is no longer appear in 'My computer' or Linux. Device Manager says:
    "Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) »

    I tried to reinstall the drivers, the DVD-RAM drivers, and the DLA software.

    All ideas are much appriciated.

    Edit: I just tried an external drive and it has the same problem, it seems to say

    Post edited by: theplatypus

    Error 39 has been described much time here in our small community ;)
    Please check this thread for example:
    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=13843&MessageID=50483

    You will find a link to the MS knowledge base document that describes how to solve this problem.
    Use of the method 1: remove the registry entry

  • Satellite U205-S5002: cannot retrieve the Express Media Player after upgrading the HARD drive

    So I bought just a new Toshiba Satellite U205-S5002 I love it. One of the great features that interest me was the Express Media Player feature.

    My first step was to upgrade the hard disk and 160 GB and 2 GB ram.
    I placed the disk and ram in my old laptop and sold it.

    Before that I did, I made a copy ghosts and ghost of the hard drive to the new drive. Well come to find out...

    Toshiba is not provided with this software preinstalled, so I followed the instructions to burn my recovery disk Express Media Player and the boot on the new disk.
    So this is where the saga begins...

    After 15-20 seconds, I get a soothing blue screen (NOT of blue BSOD you mind) who says:

    /!\
    An error occurred during the recovery of "Express Media Player".
    -------------------------------------------------------
    Please pick up the image again from the beginning.
    Press any key to exit.

    It is typed exactly as it is on the screen. So, I see some other forums saying: you must have the free space of the disk so I resize the partition that allows 200 MB of space. Always the same... then try 2 GB even... then the 50 GB, same problem...

    OK, so obviously not a question of space. I read while I might need to erase the drive... so I delete the partition, this same error... then I run the recovery disk and tell him to wipe the drive, wait 1 1/2 hour, it ends. No dice! So I decide... ok... Well lets try another disk... I have restored my ghost image... and burned the image again... same question... so I decide to the recovery disk and I'll try to reinstall windows in the factory and make a record...

    Well, it does not work as well as you think... the image is incomplete... windows works fine... but the c:\Toshiba\ExpressMediaPlayer folder is empty!

    I'm happy that I have ghosts my original directory. But I decide allows to Express Media Player a shot more now that I have restored to factory... always the same error... I then decide a trial more... I'll erase drive 1.5 hours, I'll restore from toshiba dvd provided but leaving plenty of space at the end 2 GB (I have a lot about people who tell you to base just around 200 MB)

    5 hours later... moment of truth... Well Yes you guessed it... I don't know anything else to try... I have a bad image?
    You need one that I can download what has worked for them for sure? Or have - I have completely found myself by replacing the HDD with after market and which is originally a kind of compatibility issue?

    Thank you in advance.
    Gabe at supergeekz dot com

    Hello

    It s a great story!
    I put t know how to start so maybe first some info on the Express media player.

    As you said, and has already proposed the Express media player has been preinstalled on the second partition.
    If you want to install this media Express on the HARD disk drive, 150-200 MB of free space must be available. This free space must be on the end of the HARD drive and there must be unallocated.
    To get these free space on the HARD disk, 3 third-party products should be used as for example the Partitions Magic 8!

    I'm not going to write a story how to recover the Express media player because Toshiba has already created useful documents, which described complete installation!
    I found these documents in the knowledge base of computer Toshiba:
    http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/generic_content.jsp?service=EU&ID=TIC2

    * Check this box: *.

    [Why Express Media Player fails to run after replacing HARD drive or recovery? | http://support.Toshiba-tro.de/KB0/FAQ5C018T000FR01.htm]

    [How to recover a laptop Expert Mode with 2 Partitions and Express Media Player? | http://support.Toshiba-tro.de/KB0/TSB58014O0008R01.htm]

    Hope I could help you.

  • No VMnet0 network bridged after upgrade the host to win 8.1

    Hi, I have many VM that worked well, and then I upgraded to VM Workstation 10 the other day and all right.

    I ran a few VM after and the network worked. All VMS are defined as connected by a bridge.

    Then I updated the PC windows host 8 to 8.1. Now, when I run VM workstation and run a virtual machine, I have no network connection.

    and I get an error (see screenshot) on no VMnet0 does not.

    If I try and add the network editor VMnet0 and jumpered value or change VMnet1 bridge I get an error see screenshot #2

    No idea what is wrong or what to check. Never had this kind of problem before.

    I checked the services on the host computer and found no VMnet services.

    I have no configuration VMnet0 virtual network editor in and if I try and add that I can't put it as filled. I don't know, I got VMnet

    before installation I think that I just checked Bridged in the configuration of the VM and it just worked before, but do not have now.

    Thanks for any help

    Rainey

    Too bad.

    I got it to work, I closed all the VM.

    Network editor opened and restored by default and it's working now.

    I searched and read that in another post.

  • Laptop computer DV6174ea not start after upgrading the bios!

    HP dv6174ea lapop - Win XP media center edition with sp3 - processor intel core duo - 2 GB ram - 120 GB hd

    Ive just used the upgrade of bios of HP downloads flash to upgrade the Phoenix bios on my dv6174ea to version 2.9 1.06.Flashed successfully but on reboot it reaches windows XP start screen (black with logo) fails then a blue screen and restarts quickly. Same cycle occurs again and again. Ive tried to boot from the XP cd, but it gives the message "no hard drive not detected" and fails. detect the drives in the BIOS there is no options to the automobile.

    Curiously, a USB bbot containing paragon hard disk manager won't start and sees my drive (two partitions) and the system partition is active.

    I wonder if the flashing the BIOS changed settings or drive letters so that windows does not see properly. I wish there was just a simple option in the bios for detection of discs.

    Can someone pls help.

    If you want to start your computer from the xp cd, then enter the bios and it try to disable the sata mode and activate the ide mode and then try to format your drive... it should work... !!!

  • Why I can't make video call after upgrade the latest version?

    It's really makes me confused. I can't do for the Visio with my friends after update the latest version of Skype. I use PC / laptop here. In fact, I have a cam here. Give me a solution, if I can do for the Visio again as usuall with my friends

    Thanks before

    Uninstall the version 6.18 and install the older version of Skype 6.14.0.104:

    http://download.Skype.com/MSI/SkypeSetup_6.14.0.104.msi

  • Satellite L50-B-177 - after upgrading the BIOS can not use the Polish symbols

    Hi, I'm newbie here. This is my first post, so sorry for the plain text.

    I have a problem with the laptop Satellite L50-B-177 1 month of my wife. After update BIOS (from Toshiba Service Station) to version 1.70 I have this problem: it is impossible to use symbols of Polish that comes with ALT + z, ALT + x, ALT + c. other - ALT + a - works normally.

    Problem is the operating system independent (even on the live session of Ubuntu). I understand that this is a specific problem for the location of the Poles, but causes cell useless for my wife (she is a teacher and write a lot of text). As much as I know BIOS downgrade is not available for customers, and the weeks of waiting for the new package of BIOS is out of the question.

    Any suggestions will be appreciated.

    Hello

    This problem occurred imadiately after updating the BIOS?

    Have you tried to set the BIOS settings by default once the update is complete?
    If this isn't it.

    Also, check if the Polish keyboard language was chosen correctly and as a default value.

    Comments are greatly appreciated.

  • Satellite P200 - option SATA missing after upgrading the BIOS

    Hey guys!
    First sorry for my englich
    So I have a toshiba satellite p200 1jy upgrade the version of the bios (Phoenix bios) 2.70, but when I update upward I don't have the option of ahci sata or ide mode, I do not have this option, but I had before upgrade,
    so please what can I do to switch to ahci or ide mode, can I downgrade the bios version

    So thank you we

    Hello

    Must add driver SATA while installing Windows.
    During the installation process you will be asked to add the driver (F6 key)
    Then you could add the connected USB floppy disk driver.

    More details how to do here:
    http://APS2.toshiba-tro.de/KB0/TSB7B020R0000R01.htm

    or here

    [How to integrate the AHCI driver when installing Windows XP | http://aps2.toshiba-tro.de/kb0/HTD9401AN0000R01.htm]

  • Film of test does not work after upgrade to 5.5

    I could create a file with the parameters of the ios and test it on my pc by choosing check/Test/Test movie or by pressing Ctrl + enter in Flash 5.0. Opens in a new window. Now, I have updated Flash 5.5, and when I do the above, nothing happens. In a tutorial, I could see the Professor test its ios to download on his mac, so it seems like it should work. Anyone who can give me some advice?

    Apparently default keyboard shortcuts has changed in CS5, who inherited the CS5.5

    For example, "publish SWF" used to be SHIFT + F12, but now he has still to shift + Alt + F12.

    This one, though, in my view, remained the same.  The choice of menu to access is a little buried today: control-> test-> Test movie.

    And in the preview player, in there, Ctrl-enter is then bound to 'Simulate Download', which is what you see in the Panel change the shortcuts that the conflict if you try to change something of another "Ctrl + Enter".

    Maybe you could try to go to the keyboard shortcuts and change the shortcut for "Test Movie orders on Menu"-> view-> simulate download to something else, so it is not a conflict?

    ----

    That being said, Ctrl-Enter works reliably for me in CS5.5... But don't have any other things! See my post on the symbols of police being imported from a shared library of TIME...

    LEO

  • How to upgrade the Client installation from the Admin 12.1.0.2 to the most recent Group of patches available for the installation of the database.

    Hello

    We have sql client version 12.1.0.2 which has some issues in terms of sqlloader does not. This has been fixed by the patches oracle 20315685 group. Can someone help us understand how to install this group of patches on the installation of the Client. How to get on the client only the upgrade from group fixes provided by oracle.20315685 in this case.

    Concerning

    Patch 20315685 is WINDOWS BUNDLE PATCH 12.1DB. 0.2.2

    It is a bundle patch is developed to fix bugs related to 12.1.0.2.0 version on windows platform.

    This patch is common for the database server and Client.

    To apply the patch

    (1) services the customer stop like sqlplus, sqlloader

    (2) unzip the downloaded patch

    (3) cd

    (4) set as % ORACLE_HOME %path% environment variable

    (5) %ORACLE_HOME%/OPatch/opatch apply

    It will apply the necessary corrections.

  • No service after upgrade the server to 5.2 on El Capitan

    I have a web server that was doing very well until I left the 5.2 update suggested to install OS X Server. I can't get to broadcast web pages. Screen sharing works always and nothing has changed on the routers, etc.

    I restarted the server after the update and restarted the server itself several times but keep getting connection via a browser failures.

    I did the upgrade even on other servers as well as the upgrade of Sierra. This server is running El Capitan, and is the only one that gave me problems. 5.2 server is not compatible with El Capitan?

    Some additional info:

    I can connect to the server through ftp and other services; just no web service.

    Port tests show that port 80 is not blocked

    Using the IP address I can get to the window of the home server.

    Accessibility means no services available

    Websites is on and I can't find anything that is not defined in law or is different than before the update.

Maybe you are looking for