Network access error: not enough server storage is available to process this command

Hello
I can't access the other computers on my network neighborhood.
If I try to use \\computer\d$ running, I get "not enough server storage is available to process this command."

I look in the case of newspapers and I have an error: "{the browser service has failed retrieve the backup list too many times on transport \Device\NetBT_Tcpip_{97851F92-8FAC-4FB2-A6C9-CAB1B0FE6593}." The secondary Explorer stops. »

I enjoyed all the ideas. I hope I don't have to reinstall the system (Windows Vista Business 32 bit)

Dan

I'm glad that you got this sorting. You were one of the rare cases where there was not enough space on a hard drive. Generally, the "not enough space" is misleading. In all cases, it is good to know things work now. Thank you for taking the time to let us know. MS - MVP - Elephant Boy computers - don't panic!

Tags: Windows

Similar Questions

  • Desktop\SharedDocs is not accessible. You are not allowed to use this network resource. Not enough server storage is available to process this command.

    \\XXXDesktop\SharedDocs is not accessible. You are not allowed to use this network resource. Contact the administrator of this server to find out if you have the permission to access. Not enough server storage is available to process this command.
    I got the above message when I tried to access my room servert pc (XP Pro with Service Pack 3) from another pc Client (XP Home Edition with service pack 3) on a network share. I see all class document & readers who share in my network places on both PCs.
    There is no problem when I have access to XP Home Edition of XP Pro. I heard the pc installed with Acronis True Image to give to this question. But my two PCs are installed with it. Any solution.
    What I've tried so far on my pc (XP Pro):
    1. click on start, run, type regedit, and then click OK.
    2. Locate and double-click the following registry subkey:
    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Lsa
    3. on the right side, double-click restrictanonymous setting.
    4. make sure that that the value in the value data box is set to 0, and then click OK_ (why the default value is 0. I change it to 1, but always the same)
    5. close the registry editor.
    6. restart the computer.
    I also tried to enable the allow anonymous enumeration of SAM accounts and shares on XP Pro (default value is Disable).
    File and printer sharing exception is enabled in firewall. Don't have a firewall part 3

    The two guest account are capable of Simple file sharing in XP Pro box checked also checked.

    Hello

    Please visit the following link.

    http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-networking/three-computers-networked-fine-then-suddenly-the/3976b554-bb9c-4920-881f-38eb64480ca7

  • Error when you try to connect to a shared network drive by car on the portable XP from VISTA desktop: "not enough server storage is available to process this command."

    Hello
    I was able to connect ok in a shared folder on my laptop VISTA from my XP desktop computer.
    but when I try the other way around (to connect to a shared drive on my desktop XP FROM my VISTA laptop), I get the following error message:

    "The mapped network drive could not be created because the following error occurred: not enough server storage is available to process this command."

    Desktop is HP Pavilion a1410n
    Windows XP SP3 Home Professional 3 GB RAM
    Laptop is HP dv5z
    Windows Vista Edition Home Premium SP2 4 GB RAM

    I would like suggestions.
    Thank you very much.

    Ideas:

    • You have problems with programs
    • Error messages
    • Recent changes to your computer
    • What you have already tried to solve the problem

    Remember - this is a public forum so never post private information such as numbers of mail or telephone!

    Steve,

    Thanks a lot for the link to this article.
    It was most helpful.

    I also found this forum useful post:
    http://www.techsupportforum.com/Networking-Forum/networking-support/114373-cant-map-new-network-drive.html

    In particular, he said to check the event log of the computer that you are trying to connect to (the remote computer) to search for an event ID 2011, which would be entered in the time you finally tried to connect and does not.
    I did alt-click on the icon MY COMPUTER (from the remote computer) and the menu HANDLE, click the EVENT VIEWER folder (in the left pane), and then the SYSTEM folder under that.
    On the right pane, I found an ad for the event ID 2011 at the time wherever I finally tried to connect.

    To test this, I went to the VISTA laptop and tried to connect the computer to Office XP again, which gives a different error message on the VISTA laptop.
    When I went back on the XP desktop I tried to connect to and looked again to the event log, of course ANOTHER event ID 2011 has been registered with the new time of my additional attempt to connect.

    He confirmed that it was likely that the IRPStackSize was the problem, as your proposed article.

    Then I printed article how DO TO SAVE AND RESTORE the REGISTER to: http://support.microsoft.com/kb/322756/
    then backed up the registry (both by running a restore system to register and by exporting from the top level of the regedit).

    I then went in regedit on the desktop in XP for the
    HKEY_LOCAL_MACHINE\SYSTEM\CURRENTCONTROLSET\SERVICES\LANMANSERVER\Parameters file described in your article.
    There was NOT an entry for IRPStackSize in the right pane, so I followed the instructions in the add - it and change it to decimal 15.
    I rebooted and tried to connect but still got the same error.
    The article said that the default value is 15, so I assumed that adding input IRPStackSize to 15 has not changed anything.

    So I went into regedit and changed the value of IRPStackSize of 15 to 18, restarted and it solved the problem.

    I found that the following articles is also useful in the resolution of this problem (aside from the one you gave):

    http://support.Microsoft.com/kb/285089

    http://www.smartcomputing.com/editorial/article.asp?article=articles/archive/r0803/10r03/10r03.asp

    I typed this all this while this might help others who may encounter this same
    Error "not enough server storage is available to process this command" when you try to
    Map a network drive (or just try to connect) to a XP computer from another computer.

    Thanks much for the lead.

  • Three computers networked fine then suddenly the error message «...» Contact the administrator of this server to find out if you have access permissions. Not enough server storage is available to process this command. "

    I had a network that worked very well with three 2 computers running Windows XP Professional and Windows XP Home Edition 1. Suddenly, the network has just stopped allowing certain communications giving the above error message (I have another thread address with XP to Vista computers). The main computer with XP Pro, I'll call A, the second computer with XP Pro, I'll call B and third with XP Home will be C. All computers can share files and printers then without any changes to the system that occurred the following:

    A can access the documents and printers on B and C

    B may NOT have access to documents or printers on one, but access to documents and printers on C

    C cannot have access to the documents on one, but CAN access A printer and CAN access the documents and printers on B

    When access is denied error message is displayed:
    "\\A\My documents is not accessible. You might not have permission to use this network resource. Contact the administrator of this server to find out if you have access permissions. Not enough server storage is available to process this command. "(\\A\ being the computer that I am trying to access)

    As I said access from all computers on this network was working fine a week ago and there has been absolutely no changes made to the network. I checked the following

    1. workgroup name on all computers are the same
    2. file and printer sharing are enabled for all computers.
    3. all computers may been from each computers just denied in some cases.

    The firewall that runs on all three machines is AVG and there were no changes to the one last week, but I checked that sharing is allowed.

    I even tried to run the Configuration Wizard from the network on all computers to see if it works, but the same exact problems occur after doing this.

    I met this problem now THREE times. I can't believe that I'm the only one who has this problem and I can't believe that there isn't a solution for it. None of the Microsoft documentation has even a hint of a solution for this specific problem.

    I need a solution that closes completely the network at my church, and they cannot afford to buy printers and others for each of their computers.

    This error message is misleading. See article Knowledge Base Microsoft Antivirus software may Cause Event ID 2011 for a likely solution, specifying a value of IRPStackSize 15 on A computer.
    Boulder computer Maven
    Most Microsoft Valuable Professional

  • Windows Server 2008 32 bit - "not enough server storage is available to process this command."

    My operating system is Windows Server 2008 32-bit. When I install SQL Server 2008, system throws me error.

    "Not enough server storage is available to process this command."

    Free space in my drive C is 195 GB.

    Even I checked upward with IRStackSize, and is to have a value of 50. I still get the same error.

    Kindly guide me to solve this issue.

    Concerning
    Hitesh Parsawala

    Hello

    You can find the Server forums on TechNet support, please create a new post at the following link:

    http://social.technet.Microsoft.com/forums/en/category/WindowsServer/

  • Unable to connect win7 starter to xp printer error message: "not enough server storage is available to process this command."

    When I tried to connect my Win7 starter Netbook on my HP C5280 printer shared in my XP Pro SP3 desktop computer, this error message until I install the appropriate driver

    PS:
    1 - Win7 allows me to choose the printer in XP to connect to.
    2 - I tried to create or increase the value of "IRPStarckSize" in the registry, in computers
     
    Thank you for your help

    Hello

    Thank you for your quick response.
    I solved the problem as follows:
    1 correct the evil of "IRPStackSize": instead, I wrote IRPStarckSize! " in the registry
    2. create / change the value of ""IRPStackSize ' to '25' in XP and Win7 Starter registry "
    4 - restart both computers.
    5 -Add a printer in Win7 starter, using 'Add a printer pop-up menu'
    6 - Select "create a new port. Select "Local Port" as the port type.
    7. in the "Enter a port name" box, type the address in the following format:
         \\ my XP Pro SP3 utilisateur\Mes shared the name of the HP C5280 printer 
    8 - click Next
    9 - Choose the appropriate driver in the list of drivers.
    If no driver available, click the Windows Update button, wait for the process finishes and then look for the
    driver again.
    10. complete the installation by printing a test page.
    Hope this will help other members of the Microsoft Community.
    PS installed anti software virus in my computer have no impact in my case.
  • "Not enough server storage is available to process this command."

    After you run all updates yesterday from MS, now I can't in 2 other computers in my workgroup.

    Why has it happened?  I do not know.  In the past, this bug has been associated with systems that Norton anti-virus was installed.  I don't know why it should suddenly appeared after the recent updates.

    The article linked above:

    1. In the right pane, double-click the IRPStackSize value.

      NOTE: If the IRPStackSize value does not already exist, use the following procedure to create it:

      1. In the folder registry settings, right click on the right pane.
      2. Point to newand then click DWord value.
      3. Type IRPStackSize.

        IMPORTANT: Type "IRPStackSize" exactly as it appears because the value name is case-sensitive.

    2. Replace the decimal Base.
    3. In the value data box, type a value that is greater than the value that is listed.

      If you created the IRPStackSize value using the procedure described in step 1, the default value is 15.

  • Error Msg: "not enough server memory is available to process this command" tries to open the network when the folder shared

    Hello.  I did some of my files of Windows XP Dell system accessible on my home wireless network.  When I try to open the folder (which appears in the network folder) on my Sony Vaio with Windows Vista, I get the error msg that I have stated above in the title of this Post.

    The entire message starts like:

    \\DOUG-DELL1\Denises at the bottom of the folder is not accessible. You could

    are not allowed to use this network resource.  Contact the

    Administrator of this server to find out if you have the permission to access

    "not enough server storage is available to process this command" tries to open the network when the folder shared.

    I have a bitmap and a Jpeg screenshot captures showing the specific error message as well as the objects on my network - is possible I can join to this post?

    This error message is misleading. See article Knowledge Base Microsoft Antivirus software may Cause Event ID 2011 for a likely solution, specifying a value of IRPStackSize 15 on the Windows XP computer. Boulder computer Maven
    Most Microsoft Valuable Professional

  • Error message: "not enough server memory is available to process this command" tries to open the network when the folder shared

    When an XP machine is peer-to-peer by ethernet to a 7 W machine, sometimes the XP machine cannot access the files W 7 and the Xp machine displays the message "not enough memory server is available... "the W7 machine retart solves the problem, but the problem recurrs each week.

    Hi Richard hartwell,.

    Could you tell what antivirus software you have installed on your Windows XP machine?

    The problem occurs because of a software antivirus installed on your Windows XP computer.

    See article Knowledge Base MicrosoftAntivirus software may Cause Event ID 2011 for a likely solution, specifying a value of IRPStackSize 15 on the Windows XP computer.

    As a test, you can consider disabling the security software on your Windows 7 machine as well.

    http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Firewall-on-or-off

    http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

    Note: Allow all security software after the trial.

    Aziz Nadeem - Microsoft Support

    [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

  • Move (or copy) files__Error GRAND 0x8007046A: insufficient server memory is available to process this command

    error 0x8007046A: insufficient server memory is available to process this command on BOTH Vista and XP, when you try to move LARGE (> 100 GB) files from drive 1 to external drive connected locally

    Currently trying to use robocopy and changed the

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\LanmanServer
    50 to 12 \Parameters

    WHY is happening.  GREAT video becomes more common, this will become a growing problem?

    E-mail address is removed from the privacy *.

    Just got "insufficient system resources to complete the service requested, using robocopy on my xp machine.

    This becomes a very serious problem that I have almost 200 GB tied up on my local disk in two files that I need to get away!

    Help!

    Boblevy,

    I had this problem with the Western Digital external drives in the past. There is an article on this specific error found here:
    http://support.Microsoft.com/?scid=kb;en-us;177078

    It refers to the same registry key that you mentioned above. You mention that you are changing the key; If it helped?

    This may be caused by your antivirus and it may be interesting to try this copy even in Mode safe and then further identify the issue with a clean boot:

    Method 1: Put the computer in safe mode and see if the problem persists:

    http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

    Method 2: Clean boot

    If the problem is not repeated in safe mode, there is probably a startup item or service is causing the problem. Follow the steps on the following link to locate the item or service responsible for the error:

    http://support.Microsoft.com/kb/929135

    Cody C
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • IE 8 do not install not enough storage is available to process this command

    I install windows 7 32 bit

    install ie9 it's done and working properly

    but uninstall ie9 and install ie8

    do not install and error show

    "IE 8 do not install not enough storage is available to process this command."

    "Installation was not complete.

    When you uninstall Internet Explorer 9, it will automatically restore/reinstall Internet Explorer 8 since IE 8 is integrated into Windows 7.

  • MapViewOfFile: Not enough memory is available to process this command.

    Hello

    Has tried to insert documents and questioning at the same time. This mistake has not happened before.
    MapViewOfFile: Not enough storage is available to process this command.
    
    PANIC: Not enough space
    com.sleepycat.db.RunRecoveryException: DB_RUNRECOVERY: Fatal error, run database
     recovery: MapViewOfFile: Not enough storage is available to process this comman
    d.
    
    PANIC: Not enough space: DB_RUNRECOVERY: Fatal error, run database recovery
    Here's how my environment is configured:
    public void setXmlEnvrionment()
         {
    
              try
              {
                   //File envHome = new File(properties.getProperty("DATABASE_LOCATION"));
                   File envHome = new File("");
    
                   EnvironmentConfig envConf = new EnvironmentConfig();
                   envConf.setAllowCreate(true); // If the environment does not exits,
                   // create it.
                   envConf.setInitializeCache(true); // Turn on the shared memory
                   // region.
                   envConf.setCacheSize(100* 1024 * 1024); // 100MB cache
                   envConf.setMutexIncrement(22);
                   envConf.setMaxMutexes(200000);
                   envConf.setMaxLocks(200000);
                   envConf.setMaxLockers(200000);
                   envConf.setMaxLockObjects(200000);
                   envConf.setInitializeLocking(true); // Turn on the locking
                   // subsystem.
                   envConf.setInitializeLogging(true); // Turn on the logging
                   // subsystem.
                   envConf.setTransactional(true); // Turn on the transactional
                   // subsystem.
                   
                   // envConf.setTxnNoSync(true); // Cause BDB XML to not synchronously
                   // force any log data to disk upon transaction commit
                   envConf.setLogInMemory(true); // specify in-memory logging
                   envConf.setLogBufferSize(60 * 1024 * 1024); // set logging size.
    
                   envConf.setLockDetectMode(LockDetectMode.DEFAULT); // Reject a
                   // random lock
                   // request
    
                   myEnv = new Environment(envHome, envConf);
                   System.out.println("Environment created...");
              } catch (Exception ex)
              {
                   ex.printStackTrace();
              }
    
         }
    No idea how to solve this problem?
    Thank you very much! :)

    Hello

    PLS, try to run without snapshot. Remove the following line:

    txnConfig.setSnapshot(true);
    

    If you want that the snapshot. Enable setMultiversion in ContainerConfig.

    Thank you

  • nlsdl.amd64.exe error 'not enough memory is available to process this command. "

    Hello

    Recently, I was introduced to the multilingual support for use in my applications. I went to microsofts site to learn the tutorial here, but when I install the Microsoft National Language Support API 1.0 returned then try to install the nlsdl.amd64.exe installation package, it gives me an error "not enough memory is available to process this command."

    I increased the IRPStackSize to 15 (0xF) and restarted just in case where. Tried to install it again. The same problem. One thing I noticed and tried to delete was my external storage drive that acts as a RAM drive as the first time I tried to install this that he actually unzipped in external hard drive instead. Do not change.

    What can I do to solve this problem and continue on this tutorial?

    Here's what I'm working with on professional W7 X 64.

    Add the Support of Board multilingual user in an Application

    Microsoft National Language Support returned APIs 1.0

    This issue is beyond the scope of this site and must be placed on Technet or MSDN

    http://social.technet.Microsoft.com/forums/en-us/home

    http://social.msdn.Microsoft.com/forums/en-us/home

  • Installer corrupted Windows - not enough memory is available to process this command error prevents me to update.

    My installer of Windows probably corrupted, as it gives the "this installation package cannot be opened.  "Verify that the package exists and that you can access it, or contact the application vendor to verify that this is a valid Windows Installer package" message during the installation of some programs.  I'm now using Windows 7, but the problem has been around for my Vista installation.  I am unable to do a clean install of the operating system that didn't record because I bought 7 through the Win741.com agreement.
    In addition, when I try to update Windows install, I get the message error "not enough memory is available to process this command."

    I tried several things, like the safe mode, the command msiexec \regserver (maybe wrongly?  "He wouldn't take it without space), and nothing works.  I guess I should add that I tried it works as an admin too, given that always gets mentioned - and probably should be.  Help?

    You are welcome to help.

    To exclude a problem with your user account can you try an another user account with administrator privileges (create one if nessary) and then try to install the applications of this account.

  • Error 0 x 80070718 not enough quota available to process this command to rename photos

    Original title: Hello... I am having trouble renamining my photo files & get error message

    error message 0 x 80070718 not enough quota available to process this command, all hot to fix ideas?

    Hello

    Follow the link below and check if that helps.

    http://support.Microsoft.com/mats/windows_file_and_folder_diag/

Maybe you are looking for