Network connection lost after standby on Satellite P200

Hello

Laptop Satellite P200
OS VISTA 32

When I stop to work with the laptop, I usually close monitor and when next time open computer laptop lost WIRELESS card.

Then I have to renew the configuration IP and internet begin to work.
Anyone know why and how to avoid it?
End I want to continue using boot options.

TNX for any idea

Sandi

Hello

In your case, I recommend updating BIOS and to enable the option to Wake up on LAN in the BIOS and Vista.

In Vista, you can enable it in Device Manager-> properties-> Advanced tab LAN card

In addition, an update of the LAN driver would be desirable.

Tags: Toshiba

Similar Questions

  • Satellite Pro U400 - network connection lost after suspend

    I have a Toshiba Dynadock. My network is connect directly in dynadock.

    When suspend my Satellite Pro U400 and after reboot to continue working I lost my network connection. Then I shut down my computer and disconnect/connect Dynadock I can continue working.

    What is the problem?
    Dynadock software version is 2.0

    Hello

    I see that you have switched from Vista to XP.

    First of all I recommend you update the BIOS.
    As I m not wrong on the European driver Toshiba page, you should find a newer version of the BIOS.

    You will need to upgrade Win XP to the last State.
    The XP must be up-to-date and all service packs, hotfixes and patches MS must be installed in your laptop.

    Access the Device Manager, and then score in each USB hub root, you must disable the option called allow the computer to turn off this device to save power
    You can find this option in the properties-> tab power management

  • Network is lost after stanby mode - Satellite M40

    I'm from Holland
    I have a Dug Satalite M40 - 170 for several times that the network connection is lost after sleep.
    What is the sollusion. OS = Windows XP prof.

    [Edited by: admin November 23 05 07:07]

    Hello

    My unit is also connected to the company LAN. You use very often stand-by and hibernation mode, but after the awakening of procedure the connection is establish again shortly after.

    Try disabling the network card for a just a few seconds and turn it back on. This option that you can find in tool ConfigFree.

    Good bye

  • "Network connectivity lost" alert - how to find which NIC is it?

    Hi, we cluster with VCenter 5.5 HA and 2 X ESXi servers.

    Each host has 4 NIC

    One of the host's alert 'Network connectivity lost' that was triggered 02:00 in the morning. Is to verify that NIC is this anyway?

    The events tab says know as NIC.

    Any help would be appreciated, thanks.

    You should see some sort of event in the user interface and the vmkernal.log and vobd.log.


    VMkernel.log

    ~ #vmkernel.log | grep "link down"

    2014-11 - T 05, 20: 17:20.770Z cpu0:33263) netsched: NetSchedMClkNotify:2329: vmnic1: link down notification

    ~ #vmkernel.log | grep 'link up'

    2014-11 - T 05, 20: 17:33.314Z cpu0:33265) netsched: NetSchedMClkNotify:2321: vmnic1: link notification

    2014-11 - T 05, 20: 17:33.656Z cpu1:33411) netsched: NetSchedMClkWatchdogSysWorld:3786: vmnic1: bind an event received, device operating at 1000 Mbps for the adjustment of the depth of queue to 8646 bytes with bytes 131 expected / us

    2014-11 - T 05, 20: 17:33.735Z cpu1:32808) netsched: NetSchedMClkNotify:2321: vmnic1: link notification

    2014-11 - T 05, 20: 17:33.736Z cpu0:36689) netsched: NetSchedMClkWatchdogSysWorld:3786: vmnic1: bind an event received, device operating at 1000 Mbps for the adjustment of the depth of queue to 8646 bytes with bytes 131 expected / us

    ~ #

    ~ #vmkernel.log | grep "NIC link is Down"

    2014-11 - T 05, 20: 21:25.915Z cpu0:33267)<6>e1000: vmnic5: e1000_watchdog_task: NIC link is

    ~ #vmkernel.log | grep "NIC link is Up"

    2014-11 - T 05, 20: 21:41.660Z cpu1:33268)<6>e1000: vmnic5: e1000_watchdog_task: NIC link is up 1000 Mbps Full Duplex, flow control: no

    vobd.log

    Just did a test for you.

    ~ # tailvobd.log

    2014-11 - T 05, 20: 17:33.418Z: [netCorrelator] 620684191us: [vob.net.dvport.uplink.transition.up] Uplink: vmnic1 is in place. Affected dvPort: 5/a6 eb 07 50 28 7 b c8 5 a - a0 a6 99 e8 ad b 8, 95 6. 1 uplinks to the top

    2014-11 - T 05, 20: 17:33.418Z: [netCorrelator] 620684194us: [vob.net.dvport.uplink.transition.up] Uplink: vmnic1 is in place. Affected dvPort: 5/a6 eb 07 50 28 7 b c8 5 a - a0 a6 99 e8 ad b 8, 95 6. 1 uplinks to the top

    2014-11 - T 05, 20: 17:35.000Z: [netCorrelator] 622285373us: [esx.clear.net.dvport.connectivity.restored] network connectivity restored on DVPorts: ' 5/a6 eb 07 50 28 7 b c8 5 a - a0 a6 99 e8 ad 8 6th b 95', ' 5/a6 eb 07 50 28 7 b c8 5 a - a0 a6 99 e8 ad b 8, 95 6. Vmnic1 physical NIC is in place

    2014-11 - T 05, 20: 17:35.000Z: [netCorrelator] 622285495us: [esx.clear.net.dvport.redundancy.restored] redundancy Uplink restored on DVPorts: ' 5/a6 eb 07 50 28 7 b c8 5 a - a0 a6 99 e8 ad 8 6th b 95', ' 5/a6 eb 07 50 28 7 b c8 5 a - a0 a6 99 e8 ad 8 6th b 95', ' 5/a6 eb 07 50 28 7 b c8 5 a - a0 a6 99 e8 ad b 8, 95 6. Vmnic1 physical NIC is in place

    2014-11 - T 05, 20: 21:26.094Z: [netCorrelator] 853350673us: [vob.net.vmnic.linkstate.down] vmnic linkstate down vmnic5

    2014-11 - T 05, 20: 21:27.001Z: [netCorrelator] 854286718us: [esx.problem.net.vmnic.linkstate.down] vmnic5 of the physical NIC linkstate is down

    2014-11 - T 05, 20: 21:42.149Z: [netCorrelator] 869405317us: [vob.net.vmnic.linkstate.up] vmnic linkstate upward vmnic5

    2014-11 - T 05, 20: 21:43.002Z: [netCorrelator] 870287321us: [esx.clear.net.vmnic.linkstate.up] vmnic5 of the physical NIC linkstate is in place

    2014-11 - T 05, 20: 24:38.723Z: [netCorrelator] 1045972218us: [vob.net.vmnic.linkstate.down] vmnic linkstate down vmnic5

    2014-11 - T 05, 20: 24:39.000Z: [netCorrelator] 1046284854us: [esx.problem.net.vmnic.linkstate.down] vmnic5 of the physical NIC linkstate is down

    2014-11 - T 05, 20: 24:42.230Z: [netCorrelator] 1049478491us: [vob.net.vmnic.linkstate.up] vmnic linkstate upward vmnic5

    2014-11 - T 05, 20: 24:43.001Z: [netCorrelator] 1050286523us: [esx.clear.net.vmnic.linkstate.up] vmnic5 of the physical NIC linkstate is in place

    * Reminder to implement Syslog.global.logHost (software) advanced creation collection newspaper and magazine.

  • Network connectivity lost every 24 hours after the migration of DVS

    Hello community...  Well, I'm puzzled again.  I am running a vSphere 5.5 U3 environment with the latest patch.  I'm going through certification VCP - VTC prep and decided to migrate my (lab at home) environment of standard virtual switches to virtual switches distributed as I have not had a lot of experience with them so far.  Migration seems to be okay.  Before migrating, I used three different 1 Gbit/s links a group of hash LACP-IP on my standard vSwitch.  I have several VLANs for different laboratory networks.  One is specifically used as a DMZ for the WAN to my ISP connectivity.  I created a virtual machine for use as a firewall with multiple network cards, which one is connected to this VLAN WAN.  On the standard vSwitch seemed to work exactly as expected.  For some reason any after moving to a DVS, the firewall VM needs to be recharged all morning before the full network connectivity is restored.  It's a strange problem.  I tried to re - create the virtual machine and play with the security settings of DvPortgroup, but the problem persists.  Anyone out there have any ideas as to what could cause this?

    Oh, a little more in detail...  I moved from hash balancing LACP/IP road based on the physical NIC load with the migration to DVS.  Remove groups from the aggregation of connection of the switch too.

    Well, change of load balancing policy and upgrade the DvSwitch to version 6 did not help.  However, I stopped the machine virtual and added 4 E1000 NIC as a test.  I've reconfigured the firewall VM to use the new cards instead of the VMXNET3.  Load Balancing has changed back to "load depending on the physical NETWORK card" and always use VGT to separate traffic.  From now on, he went the longest without experiencing the issue so far.  About 16 hours so far without having to restart the virtual machine.  Will keep posted guys.

  • Apple Store is not up-to-day - network connection lost

    Hello

    I have a MacBook Pro with OS X El Capitan installed and allows you to connect to the Bank of the United States, where I bought the laptop. I moved to the New Zealand a few months ago and changed the NZ store, and for the last two weeks that I'm not able to update the software through the Apple Store, I always get the message "the network connection has been lost", even if the network is OK:

    My account is active, no problem. I even "bought" a free app just in case and it's all good - I could add to my list of software and download it.

    Any thoughts on how to proceed?

    Thank you

    Fabio

    More info: I already followed the instructions to "If you can not connect to the iTunes Store - Apple Support.", everything is OK - no firewall issues, DNS or key ring...

  • A previous network connection lost

    My ethernet network consist of:

    -2 workstations Windows 7 cables

    -1 Windows 7 WiFi laptop computer

    -1 office wired Windows XP

    - and a HP C309a printer cable

    Everything seemed to be initially connected to the network working group when switched on via a router Airport Extreme with Internet access via a modem Telco.  Once the modem has failed, a Telco modem/router was provided as a replacement.

    Since then, one of the Windows 7 desktop computers is no longer connects with the WORKING group.  Initially, the cable has proved defective when the Internet and HP printer could not be connected through the router.  A new connection of cable to the Telco router has restored the Internet but still cannot detect the HP printer even through its IP address.  I confirmed that the Office XP always connects to the printer via the router so that all interconnection cables seem to be OK.  After checking that the WORKING group and the permissions settings appear to be the same, and reinstall the printer drivers and software for this office, there is still no connection with the WORKING group or the printer.

    In summer, all other workgroup devices connect through the router and the Internet, but 1 desktop computer only connects to the Internet.  I noted that the network connection for this desktop watch network 6, while others show network 4.  Maybe that's the problem.

    I need help to reset the settings of office 1 network WORKING group to be compatible with the rest of the devices.

    In computer networks, Teredo is a transition technology that gives full IPv6 connectivity for IPv6 compatible hosts serveInternet IPv4, but have no native connection to an IPv6 network.

    http://en.Wikipedia.org/wiki/Teredo_tunneling

    Overview of Teredo

    https://TechNet.Microsoft.com/en-us/network/cc917486.aspx

    Did you see a yellow triangle next to Teredo Tunneling?

    Try the following:

    1. Open command prompt with credentials for administrator (find CMD and right click - Run as administrator).
    2. Enter the netsh environment. Type "netsh" and ENTER.
    3. "int teredo" and ENTER
    4 ' set disabled state' and ENTER.
    5. open the Device Manager and uninstall "Teredo Tunneling pseudo-interface".
    6. open the command prompt with administrator credentials once more.
    7 netsh + ENTER.
    8. "int ipv6" + ENTRY
    9 ' set teredo client' + ENTRY
    10. open the Device Manager and the analysis of new hardware.
    11. Select 'Show hidden devices' in the view menu. You will see while it is present without errors

    See response to HairyFool:

    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/how-to-share-a-Internet-connection-between/b2e54f85-0bca-47CA-9195-5b26fbcee185

  • network connection lost alarm

    Hello

    alarm sails host shows "Lost network connectivity" and "Network of uplink redundancy lost" errors in vCenter red Rectangle symbol and came on the host, but all VM and servises performs very well what was the reason for this alarm and what is the solution for this.

    In this case it could have been a temporary problem with the network, which is already solved. To get rid of the alarm message, you will need recognize/reset the alarm.

    André

  • Help: network access lost after relocation of the host

    I am running Ubuntu 14.04 in VMWare Player. The operating system is Windows which I just reinstalled. Problem is that now the Ubuntu VM has no connection to the internet. In the virtual machine, network adapter settings, the setting was NAT. If I changed it to Bridged, that would not work either. In Bridged mode, if I check 'State of physical to replace network connection', that still does not work. If I click on "Configure adapters" mode bridged, it allows me not select any host network adapter.


    I read online that a tool called vmnetcfg.exe could help, but the old ways to get the file (from the Setup file of Vmware) does not work for me.


    Your help is appreciated!

    Welcome to the community,

    you see the virtual card 'VMware Network Adapter VMnet8' when you run ipconfig/all on the host? If Yes, are you able to ping IP address of the guest OS?

    Did you install VMware Player by right clicking the installation package and run 'as administrator '? It is not uncommon that UAC or request a virus scan/point of endpoint protection prevents the VMware Player installation correctly. What VMware services see the upward in the control panel?

    André

  • After standby mode Satellite L300 cannot connect to the internet

    Hello

    I have problems with my Satellite L300, if I put the laptop to sleep it disconnects from the internet and when I try to continue later, he said that there are no wireless networks.
    The only way I can connect again is to restart my laptop. Can someone help me please?

    Thank you

    Hello!

    I have a Satellite L300 too but I can t view such a question because I often use the Hibernate and the day before.

    In any case, I think you should try to install the latest driver from the Toshiba site:
    http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

    But before installing the new version, you must delete the old first and then reboot the laptop. After that, you can install the latest version.
    And if it doesn't work, you must update the BIOS that you can find on the Toshiba site too.

    Good bye

  • Satellite C660 - WIFI connection lost after disconnecting the AC adapter / CC

    I have a Toshiba Satellite C660/C660D.

    I always connect to the Internet via the wireless connection. However, the laptop must be connected to the power supply. As soon as I unplug the connection drops.

    Any help / advice would be much appeciated.

    Hey Buddy,

    Please read this article. Normally it should help you:
    [Wireless LAN connection disconnects when the AC adapter is removed. | http://APS2.Toshiba-tro.de/KB0/TSB12033H0001R01.htm]

  • XPS m1530 wireless connection lost after about 30-40 minutes

    When you're set on first connection is good, check connect to and Netgear appears with full signal strength. Other networks are also displayed. After that say low sinal strengh of 30 to 40 minutes is displayed wirless connection is lost and Red Cross is displayed.restart and all is well again. My old laptop is fine on the wireless up and running with no problems! I have disabled the firewall but still no problem

    Help thank you


  • Wireless connection lost after only five minutes

    Hello

    New on site, but you have a very annoying problem, here go us
    I just got a 2nd hand laptop Toshiba Satellite S1800-402 and has decided to add this to my setup wireless at home (big mistake), anyway I have a router wireless 802. 11 b of mentor and my main pc connected to the router and another pc which has a mentor 802 wireless pci card. 11B. Pcmcia card from the laptop is a mentor 802.11 g card is compatiable back, so I was told by bloke in-store pc.

    Just the problem I have is the pc successfully connect to internet the laptop will be fine OK, but 99% of the time I would say 5 minutes max before losing the connection and only way to get the rear connection is either reboot the laptop, or remove the pcmcia card and hope that it detects the wireless again. the wireless network is not secure on it and checked on the router page and there is no filtering or configure... I have Digital wireless home phones that I unplugged and get always the same problem.

    Would be - what this model has received a wireless card already and there is a conflict.

    It becomes a default really annoying that I head in fact.

    Any help would be greatly appreciated no matter what other requried info I will try to help

    Thanks in advance.

    Post edited by: sidog70

    Hello

    As much as I know this model doesn't have a WiFi card and this kind of conflict is not possible. In my opinion connection breaks are caused by software settings or false. If you make a permanent download happens the same thing?

    Try to check the power consumption of your network card WIRELESS and also Idle timeout option in the router.

  • Wireless connection lost after update

    Last night I downloaded and installed the February Patch Tuesday updates from Microsoft on my WinXP netbook. When I rebooted the computer, wouldn't my wireless connection. My other computer of Windows XP (not yet updated) worked very well. I did a restore of the system on the netbook for just before the updates, and now my Internet is back. No idea of what happened and what I should do next? I would like to install the security updates... Thank you!

    Thanks for the suggestion, Halima. I don't even think to look here so far, as I never received an email informing me that I had a response. What I ended up doing after the restoration of the system is to reinstall two updates at once. And this time everything went well. I still have no idea why I lost my wireless connection, first.

    JO-Anne

  • Map NETWORK connection not after VM provisioning in vWorkspace 8.0.1

    Hi all

    "I use vWorkspace 8.0.1 and lay out Windows 8 VM service but the problem is that I get the error message after VM provisioning '" virtualization management server reported any IP address to the computer "in the console vWorkspace.

    I tried to find the problem and found that the virtual machine on the ESX Server in not connect not not the NETWORK adapter after provisioning from the model.

    It is not question in the model as the provision of the vCenter VM is ok. ther is not question once we create VMS in vCenter. But when we try to provision vWorkspace VM, then it is in error.

    Can anyone let me know the setting of the NETWORK adapter in the virtual machine commissioning through vWorkspace.

    Please find the attached error screenshot.

    Environment-

    vWorkspace - 8.0.1

    ESX - 5.1

    vCenter - 5.1

    Thank you

    Jean Claude

    Additional accessories:

    Hi Alain,

    Do you use Customizing to OS using vmware or sysprep vworkspace function. If you are using vmware options are trying to generate an empty image and deploy it using vworkspace with sysprep option.

    I'm not familiar with your problem but I don't know that when you sysprep and the deployment of a server using vworkspace work perfectly.

    Otherwise run your vmware customization to see if there is something wrong.

    Best regards

    Sijtze

Maybe you are looking for

  • How challenging an in-app if purchase email cannot be found

    I would like to challenge a recent in-app purchase (in the month), but I can't find the email... He may have gotten deleted permanently. There must be another way to challenge these transactions, right? Also, the reason for the dispute is because tha

  • Impossible to reach the website of the company using ad 2012 R2 as DNS primary server

    Hello My system was working well all these days. But now, we've had trouble where the ping / tracert / nslookup are omitted when my static IP list is configured with DNS primary and the local server that is running in 2012 R2. All this basic network

  • Acer iconia a100 update fails "network coverage is currently poor."

    My Acer Iconia A100 has Android 4.0.3 and all updates fail with the message: Network coverage is currently low but it is not 100%, and all other network functions work fine. I see a LOT of problems, debate and questions with this same error on models

  • 0xC004F055 error code

    Trying to update to service pack. It was impossible to install and says changes in recovery. The computer shut down and this error came. I have Vista Ultimate with language pack.

  • How to restore the toolbar to the Dell docking station?

    Original title: clear bar at the top of the screen I recently had my computer cleaned of viruses.  When I came back, the light of the bar, which was at the top of the screen is gone.  How can I get that back?