Network connectivity error when you configure the server for vSphere

I've just set up my first hypervisor, and naturally it became painfully obvious how much I have to learn.

I met a problem that I don't know how to fix. When you configure the server, I have configured network settings manually in order to give him the good gateway, subnet mask and static IP address. Unfortunately, I still get "Failed" when I ping the DHCP server. ""

Hope that the community will be able to guide me in this problem. I am sure it takes to understand this, so let me know what is needed and how to get more information. Thank you!

Find the person who is responsible for the management of the switch and check which port is set to for example the VLAN you need. Depending on your setting of the port must be configured as an access port or a 802. 1 q port if you configure the VLAN ID on the ESXi host

André

Tags: VMware

Similar Questions

Failed to create field when you configure the domain for the UCM 11 g
Hi all

After installing the Oracle Weblogic 10.3.3 and ECM Oracle 11g, I configure the domain for the AAU with SCW. The wizard still fails, and error log is:

2010-06-09 11:40:25, 984 ERROR [create_gui] com.oracle.cie.wizard.domain.gui.tasks.DomainCreationGUITask - build error!
Traceback (innermost last):
"< Iostream >" file, line 17, in there?
TypeError: unsupported or operand types +: 'NoneType' and 'str '.

at org.python.core.Py.TypeError (unknown Source)
at org.python.core.PyObject._basic_add (unknown Source)
at org.python.core.PyObject._add (unknown Source)
to org.python.pycode._pyx31.f$ 0 (< iostream >: 17)
to org.python.pycode._pyx31.call_function (< iostream >)
at org.python.core.PyTableCode.call (unknown Source)
at org.python.core.PyCode.call (unknown Source)
at org.python.core.Py.runCode (unknown Source)
at org.python.util.PythonInterpreter.execfile (unknown Source)
at org.python.util.PythonInterpreter.execfile (unknown Source)

Does anyone have an idea how to fix? Thank you.

David
Hey David,

I got it exactly the same problem when I installed a few weeks back. Fortunately, the solution is simple.

Make sure that you run the config (config.cmd or config.sh) script that is located in the %MIDDLEWARE_HOME%/Oracle_ECM1/common/bin/ directory as opposed to the standard Wizard. This runs the wizard for creating domain with a different set of parameters so that the jython script that executes orders WLST at the end does not fail. If you are using windows, and using the shortcut it is start-> programs-> ECM Oracle 11g - Home1-> configure application server. One of our other guys had a problem where the entry "start in" for this shortcut was bad as well. On mine it is % MIDDLEWARE_HOME%/Oracle_ECM1/install/bin.

Hope that helps,

Andy Weaver - Senior Consultant software
Fishbowl Solutions< http://www.fishbowlsolutions.com?wt.mc_id="L_Oracle_Consulting_amw_OTN_ECM">

Published by: Andy Weaver on June 9, 2010 07:38
Typo fixed.

Re: "insufficient privileges" error when you run the Java stored procedure in another schema

I get an "insufficient privileges" error when you run the Java stored procedure in another schema, see details below. I don't know what are missing privileges (I already granted the EXECUTE privilege), suggestions? -Thank you.
Define a simple java class and deploy it as a Java stored procedure to test:

Schema: User1
test of the package;
public class HelloWorld {}
public HelloWorld() {
Super();
}
public static String Hello () {}
Return "HELLO";
}
}
CREATE or REPLACE FUNCTION HELLO RETURN VARCHAR2 AUTHID CURRENT_USER AS LANGUAGE JAVA NAME ' test. HelloWorld.hello () return java.lang.String';
Grant execute on USER2 HELLO
Test the Java stored procedure through the PL/SQL function call (in the same schema):

Schema: User1
SET SERVEROUTPUT ON
DECLARE
v_Return VARCHAR2 (200);
BEGIN
v_Return: = User1. HELLO;
DBMS_OUTPUT. Put_line ('v_Return =' | v_Return);
END;
anonymous block filled
v_Return = HELLO
Test the Java stored procedure through the PL/SQL function call in a different pattern:

Schema: USER2
SET SERVEROUTPUT ON
DECLARE
v_Return VARCHAR2 (200);
BEGIN
v_Return: = User1. HELLO;
DBMS_OUTPUT. Put_line ('v_Return =' | v_Return);
END;
Error report-
ORA-01031: insufficient privileges
ORA-06512: at "User1." HELLO', line 1
ORA-06512: at line 4 level
01031 00000 - "insufficient privileges".
* Cause: An attempt was made to change the user name or password
without the privilege appropriate. This error also occurs if
trying to install a database without the need for employment
access privileges.
When Trusted Oracle is configure in DBMS MAC, this error may occur
If the user has been granted the privilege necessary for a higher label
that the connection is active.
* Action: Ask the database to perform the operation or grant administrator
the required privileges.
For users Trusted Oracle get this error, well that granted the
the privilege that is suitable for the top label, ask the database
administrator to grant the privilege to the appropriate label.

You have created the function with AUTHID CURRENT_USER, which means that the function is executed with the rights of the applicant (but not with the rights of the author). This means that the applicant must have grants (directly or through roles) on all used/accessible objects in the service. In your case the user USER2 has not granted with EXECUTE on the class/source Java test. Class HelloWorld, causing the ORA-01031 exception. You create service without AUTHID CURRENT_USER (i.e. with AUTHID DEFINE, which is by default, if you do not have a specific reason to use AUTHID CURRENT_USER) or grant EXECUTE on JAVA test SOURCE. Class HelloWorld to User2.

Dimitar

Wireless network connection disconnects when you plug in the charger and the error message "no connection available or limited connectivity.

Original title: wireless computer does not work when plugged in and load, why?

have a laptop Windows 7 who had originally installed XP. I have not changed anything inside her, but suddenly one day any time, I have the unit plugged my Ethernet and wireless turns off. As soon as I unplug it, the computer note immediately that there is a wireless card and connects.

The computer has never done this until two weeks ago. It works just fine when unplugged, but still once, as soon as I plug it in it disconnects and States they has "No connection available" or "limited connectivity". I started seriously annoyed because it's my main laptop and I must wait for it to load in order to do something with him for an extended period of time.

The device information:

> Ze2000 HP (Pavilion series)

> Original OS: Windows XP Home Edition

> RAM: 512 MB

> 100 GB hard drive

> AMD Turion 64 Mobile Technology ML-34

___________________________________________________________________________________________________

I can provide information. No errors appear in the error log or event viewer and I made backups and reset 3 times in recent weeks.

Hello

I appreciate your efforts to solve the problem.

This problem may occur corrupt or incompatible drivers, missing updates or because of incorrect network connection settings.

Are you having the same problem when you use the configuration of a network connection?

I suggest you to check if there is no wireless or mobile network\devices which can interfere with the wireless network and remove if there is.

Method 1:
I suggest you to download and install the latest network driver on the manufacturer's Web site and check if it helps.

Check out the link:
http://h20000.www2.HP.com/bizsupport/TechSupport/ProductList.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=442888&TaskID=135

Method 2:
If the problem persists, I suggest you try the procedure described in the article and see if it helps.

Wireless and wired network problems
http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-7&V1H=win8tab4&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

Method 3:
If the problem persists, I suggest you to check that your device is allowed to the computer.

a. click on start and type Device Manager in the box start the search .

b. open the Device Manager and expand network adapter.

c. right-click on the network driver and click Properties.

d. click the power management tab.

e. uncheck all options.

f. click OKand then click OK again.

See the article and check if that helps.

Why can't I connect to the Internet?
http://Windows.Microsoft.com/en-in/Windows-8/cant-connect-to-Internet

Hope this information helps. Answer the post with an up-to-date issue report to help you further.

"Limited connection" when you configure the network between two computers XP.

Original title: Configuration of the network connection

Trying to establish a network connection between two home PCs., both running Windows XP Pro. Have been through the network on both PC Setup Wizard but, they still say limited, in fact no connection. I use an Ethernet cable between the two Crusader. If it is true what I'm doing wrong?

Thanx Terry

Old but good, networking tips from MVP Malke, MS:

The best and simplest is to buy a wireless router. This way you get Internet connectivity both machines and the added benefit of security more between you and the Internet. Then you configure your network wireless safely, and then you configure file/printer sharing. Here is information on the implementation of a router and also in networking. It seems long, but don't be intimidated. Setting up a router and the LAN of sharing between two computers takes about 15 minutes.

The router configuration

Setting up a router is simple enough. Normally, you run the CD that came with the router and follow the instructions. If you're running Vista, maybe the CD that came with the router does not work; I do not know this. But you can set up the router without the CD. Note that if you have Internet cable for the connection you have just set up the router to DHCP (or there may even be a choice of cable to choose). If you have DSL Internet, you select TRP usually and enter the username and password you selected when you initially set the DSL connection. So:

1. turn off the power to your cable modem.

2. attach a cable (usually supplied with the router) course Ethernet cat5e Internet/WAN port of the router to the Ethernet port on the cable modem.

3. connect the ethernet cable cat5e from the network card in your computer to one of the ports on the router. If you do not have an ethernet cable (because you were using USB), you will need to go to the store and buy a.

4. turn on the cable modem. After that all the lights are on, turn on the router.

To configure the router:

Have a computer connected to the router with an ethernet cable. Examples given are for a Linksys router. See the manual of your router or the router mftr's Web site. for the parameters by default if you don't have a Linksys. Open a browser such as Internet Explorer or Firefox and in the address bar type:

http://192.168.1.1 [Enter] (it is default IP address of the router, which varies from router to router then check your manual)

This will bring you to the login screen of the router. The default username is blank and the Linksys default password is "admin" without the quotes. Enter this information. You are now in the configuration of the router utility. Your configuration utility may be slightly different from mine.

Click the Administration link at the top of the page. Enter your new password. MAKE A NOTE SOMEWHERE THAT YOU WILL NOT LOSE. Re-enter the password to confirm it, and then click Save settings at the bottom of the page. The router will reboot and show you the box of connection again. Do not fill in the user name and put it in your new password to enter the configuration utility.

Now, click on the link wireless at the top of the page. Change the network name (SSID) wireless by default to something, you'll recognize. I suggest that my clients not use their surname as the SSID. For example, you might want to name your network wireless network "CastleAnthrax" or similar.

Click on save settings and when you get the prompt that your changes were successful, click the wireless security link which is just beside the Basic Wireless Settings link (where you changed your SSID). If you have a newish computer, you will be able to affect security WPA2-Personal Mode. Do this and enter a password. The password is what you enter on all computers that are allowed to connect to the wireless network. MAKE A NOTE SOMEWHERE THAT YOU WILL NOT LOSE.

At this point, your router is set up and if the computer that you use to configure the router will normally connect wireless, disconnect the Ethernet cable and wireless of the computer should see your new network. Enter the password you created to join the network and start surfing.

*****

B. file/printer sharing of

Excellent, comprehensive, but easy to understand article on sharing files/printer under Vista. Contains information about sharing printers and files, and the folders:

http://TechNet.Microsoft.com/en-us/library/bb727037.aspx

For XP, start by running the Network Setup Wizard the on all machines (see warning in section A below).

Problems sharing files between computers on a network are usually caused by 1) a misconfigured firewall or a firewall neglected (including a dynamic firewall in a virtual private network); or (2) inadvertently run two firewalls such as the firewall of Windows and a third-party firewall. and/or (3) do not have accounts to the same users and passwords on all computers in the workgroup. (4) tries to create actions where the operating system does not.

A. configure the firewall on all machines to allow traffic to local area network (LAN) as being approved. With the Windows Firewall, it means which allows file sharing / print on the Exceptions tab normally run the XP Network Setup Wizard will take care of this for these machines. The only "witch hunt", it will turn on the XPSP2 Windows Firewall. If you are not running a third-party firewall or you have an antivirus with "Internet Worm Protection" (like Norton 2006/07) which acts as a firewall, you're fine. With a third-party firewall, I usually set up the allocation of LAN with an IP address range. E.g. would be 192.168.1.0 - 192.168.1.254. Obviously you would substitute your correct subnet. Do not run more than one firewall. DON'T STOP FIREWALLS; CONFIGURE THEM CORRECTLY.

(B) to facilitate the Organization, put all computers in the same workgroup. This is done from the System applet in Control Panel, the computer name tab.

C. create the counterpart of the user accounts and passwords on all machines. You do not need to be logged into the same account on all machines and assigned to each user account passwords can be different; accounts/passwords just need to exist and to match on all machines. DO NOT NEGLECT TO CREATE PASSWORDS, EVEN IF ONLY OF SIMPLE. If you want a machine to boot directly to the desktop (a particular user account) for convenience, you can do this. The instructions on this link work for XP and Vista:

Set up Windows to automatically connect (MVP Ramesh) - http://windowsxp.mvps.org/Autologon.htm

D. Si one or more of the computers is XP Pro or Media Center, turn off Simple file sharing (Folder Options > view tab).

E. create share as you wish. XP Home does not share the users directory or the Program Files, but you can share folders inside those directories. A better choice is to simply use the Shared Documents folder. See the first link above for more information on Vista sharing.

F. you have the job of file sharing (and tested by exchanging a file between machines), if you want to share a printer connected locally to one of your computers, share of this machine. Then go to the printer mftr Web site. and download the latest drivers for the correct system. Install them on the target machines. The printer must be collected during the installation procedure. If this isn't the case, install the drivers and then use the Add Printer Wizard. In some cases, printers must be installed as local printers, but it is outside this response.

HP Officejet 6600: Connection error when you try to use the Apps?

I am trying to use the applications so that I can scan to e-mail. When I try to open apps, I have a connection error. I have run the wireless network test and all pass and the signal is excellent. The eprint works very well. I can't understand why I get a connection error when the wireless is configured and passes all the tests. I tried scanning HP doctor thing and could not help solve it. I'd appreciate any help.

Thank you!!

I had to delete web services and then add it again. Seems to work fine now. Thank you!

Error when you use the feature Version «Back upward in a file»

I run an error when you try to save a file version. The error is below to:
There was an error trying to get the status of the job.
1: the server returned an error during the processing of the action: CloseJob. Error message: String reference not set to an instance of a string.
Parameter name: s
As you can tell, he didn't give me much to do.
Some background information:
-J' trying to backup/export a version that has been upsized QA development
-QA and development have the same version/patch 11.1.2.3.500
-This version has been imported into the development, and then copied, and then mixed with a development version.
-I did not receive any errors during this process
-I am able to backup other files without getting this error
Any help will be really appreciated.
Thank you
Aaron

Hi Aaron,

At first glance, it looks like there may be a string of property that is not a string data type. However, before you dig too deep, try to reload the version to see if that makes a difference. I had a similar problem before and it is solved.

Thank you

Jordan

Get the error when you use the Oracle 9.2 on RRS 4 installation

Hi all

I was getting error while installing oracle 9.2.0.4 in Red hat advanced server 4

YES was generating a message

 could not able to relink ins_sqlplus.mk  and ins_rdbms.mk

but I'd ignored, after installation of the oracle s/w, I relinked bleow files

I also tried running the command below

[oracle@oracle lib]$ make -f ins_sqlplus.mk install

but when i try to make ins_rdbms.mk i was getting a error

[oracle@oracle lib]$ make -f ins_rdbms.mk install
.
.
.
.
.
..
.
u01/app/oracle/product/9.2.0.1/db_1/lib32/libgeneric9.a   `cat /u01/app/oracle/product/9.2.0.1/db_1/lib32/sysliblist` -Wl,-rpath,/u01/app/oracle/product/9.2.0.1/db_1/lib:/lib:/usr/lib -lm    `cat /u01/app/oracle/product/9.2.0.1/db_1/lib32/sysliblist` -ldl -lm    -lvsn9
/usr/bin/ld: crt1.o: No such file: No such file or directory
collect2: ld returned 1 exit status
make[1]: *** [/u01/app/oracle/product/9.2.0.1/db_1/rdbms/lib/extproc32] Error 1
make[1]: Leaving directory `/u01/app/oracle/product/9.2.0.1/db_1/rdbms/lib'

Please suggest me if this will have an impact on the DB

Published by: user00726 on July 8, 2009 23:06

If the error only occurs when you start the dbca Wizard, the database itself should be ok. Before using it for the production you can stress test your db using swingbench or hammerora to be sure that iti works well.

Concerning

Oliver

Keep the network discovery settings after you restart the Server R2 Standard 2012

Hi all

I'm having the following problem. After you restart the server from the network discovery will go off. Therefore, I do not see the server, this can cause problems in the future, so I need to know how to keep on even after network discovery settings server restart.

Thanks for the help!

Hi, manual,.

I suggest you post your query in the following forums to improve assistance in this regard.

https://social.technet.Microsoft.com/forums/WindowsServer/en-us/home

Thank you.

DirectX error when you install the game: "an internal system error has occurred. See DXError.log and DirectX.log in your Windows folder to determine the problem.

I am trying to install a game open source called Rigs of Rods on my dual-boot MacBook Pro with Windows 7 installed via Boot Camp. I get an error that prevents the installation of DirectX. I know that Win 7 includes DirectX 11, but this game does not currently support the DX 11. If I get this error when you try to install DirectX 9. I had a similar problem with another game that I tried installing on another machine Win 7 which is not started in dual mode, and install DirectX 9 worked perfectly. Here is my DXError.log and my DirectX.log.

DXError.log

--------------------
[10/01/11 16:25:07] module: DXWSetup (Mar 16 2009), file: dxwsetup.cpp, line: 219, function: CDXWSetup::InitInstallEngine

Sections are not initialized.

--------------------
[10/01/11 16:25:07] module: DXWSetup (Mar 16 2009), file: psheets.cpp, line: 472, function: PreinstDlgProc

CDXWSetup::InitInstallEngine() failed.

--------------------
[10/01/11 16:27:26] module: DXWSetup (Nov 19 2010), file: dxwsetup.cpp, line: 229, function: CDXWSetup::InitInstallEngine

Sections are not initialized.

--------------------
[10/01/11 16:27:26] module: DXWSetup (Nov 19 2010), file: psheets.cpp, line: 699, function: PreinstDlgProc

CDXWSetup::InitInstallEngine() failed.

--------------------
[10/01/11 16:29:01] module: DXWSetup (Nov 19 2010), file: dxwsetup.cpp, line: 229, function: CDXWSetup::InitInstallEngine

Sections are not initialized.

--------------------
[10/01/11 16:29:01] module: DXWSetup (Nov 19 2010), file: psheets.cpp, line: 699, function: PreinstDlgProc

CDXWSetup::InitInstallEngine() failed.

--------------------
[10/01/11 16:29:56] module: DXWSetup (Nov 19 2010), file: dxwsetup.cpp, line: 229, function: CDXWSetup::InitInstallEngine

Sections are not initialized.

--------------------
[10/01/11 16:29:57] module: DXWSetup (Nov 19 2010), file: psheets.cpp, line: 699, function: PreinstDlgProc

CDXWSetup::InitInstallEngine() failed.

--------------------
[10/01/11 16:37:13] module: DXWSetup (Nov 19 2010), file: dxwsetup.cpp, line: 229, function: CDXWSetup::InitInstallEngine

Sections are not initialized.

--------------------
[10/01/11 16:37:13] module: DXWSetup (Nov 19 2010), file: psheets.cpp, line: 699, function: PreinstDlgProc

CDXWSetup::InitInstallEngine() failed.

--------------------
[10/01/11 16:56:45] module: DXWSetup (Nov 19 2010), file: dxwsetup.cpp, line: 229, function: CDXWSetup::InitInstallEngine

Sections are not initialized.

--------------------
[10/01/11 16:56:45] module: DXWSetup (Nov 19 2010), file: psheets.cpp, line: 699, function: PreinstDlgProc

CDXWSetup::InitInstallEngine() failed.

--------------------
[10/01/11 18:39:05] module: DXWSetup (Mar 16 2009), file: dxwsetup.cpp, line: 219, function: CDXWSetup::InitInstallEngine

Sections are not initialized.

--------------------
[10/01/11 18:39:05] module: DXWSetup (Mar 16 2009), file: psheets.cpp, line: 472, function: PreinstDlgProc

CDXWSetup::InitInstallEngine() failed.

--------------------
[11/01/11 08:45:06] module: DXWSetup (Feb 4 2010), file: dxwsetup.cpp, line: 219, function: CDXWSetup::InitInstallEngine

Sections are not initialized.

--------------------
[11/01/11 08:45:06] module: DXWSetup (Feb 4 2010), file: psheets.cpp, line: 472, function: PreinstDlgProc

CDXWSetup::InitInstallEngine() failed.

DirectX.log

10/01/11 16:24:54: DXWSetup: * DXWSETUP *.
10/01/11 16:24:54: DXWSetup: WinMain()
10/01/11 16:24:54: DXWSetup: IsIA64(): not IA64.
10/01/11 16:24:54: DXWSetup: impossible to target the Version on the file C:\Windows\system32\directx\websetup\dsetup.dll
10/01/11 16:24:54: DXWSetup: installed files C:\Windows\system32\directx\websetup\dsetup.dll
10/01/11 16:24:54: DXWSetup: impossible to target the Version on the file C:\Windows\system32\directx\websetup\dsetup32.dll
10/01/11 16:24:54: DXWSetup: installed files C:\Windows\system32\directx\websetup\dsetup32.dll
10/01/11 16:24:54: DXWSetup: GetDXVersion(): could not get the RC of the registry string.
10/01/11 16:24:54: DXWSetup: DirectX Version: 4.09.00.0904.00
10/01/11 16:24:54: DXWSetup: Setup Version: 4.09.00.0904.00
10/01/11 16:24:54: DXWSetup: a newer version of DirectX has already been installed.
10/01/11 16:24:54: dsetup32: IsWow64(): not the Wow64 process.
10/01/11 16:24:57: DXWSetup: CDXWSetup::CDXWSetup()
10/01/11 16:24:57: DXWSetup: CDXWSetup::DownloadDXUpdate()
10/01/11 16:24:57: DXWSetup: OnEngineStatusChange(): EngineStatus = 0 x 1, subreport = 0 x 0
10/01/11 16:24:57: DXWSetup: OnEngineStatusChange(): EngineStatus = 0 x 3, subreport = 0 x 0
10/01/11 16:24:57: DXWSetup: OnEngineStatusChange(): EngineStatus = 0 x 2, SubStatus = 0 x 0
10/01/11 16:24:57: DXWSetup: OnStartInstall(): DLSize = 81, InstallSize = 0
10/01/11 16:24:57: DXWSetup: OnStartComponent(): ID = DXUpdate, DLSize = 81, InstallSize = 0, str = % DirectX_Setup %
10/01/11 16:24:57: DXWSetup: OnComponentProgress(): Phase = 0, = 0 progress
10/01/11 16:25:07: DXWSetup: OnStopComponent(): ID = DXUpdate, hr = 0 x 0, Phase = 9, str = % DirectX_Setup %, State = 0x0
10/01/11 16:25:07: DXWSetup: OnStopInstall(): hr = 0 x 0, str = (null), State = 0 x 0
10/01/11 16:25:07: DXWSetup: WM_APP_DOWNLOADDXUPDATE
10/01/11 16:25:07: DXWSetup: OnEngineStatusChange(): EngineStatus = 0 x 3, subreport = 0 x 0
10/01/11 16:25:07: DXWSetup: CDXWSetup::InitInstallEngine()
10/01/11 16:25:07: DXWSetup: CDXWSetup::InitInstallEngine(): Sections are not initialized.
10/01/11 16:25:07: DXWSetup: PreinstDlgProc(): CDXWSetup::InitInstallEngine() failed.
10/01/11 16:25:07: DXWSetup: WM_APP_ENDDOWNLOAD
10/01/11 16:25:14: DXWSetup: CDXWSetup::~CDXWSetup()
10/01/11 16:25:16: DXWSetup: CreatePropertySheet() returns-9.
10/01/11 16:25:16: DXWSetup: C:\Windows\system32\directx\websetup\dsetup.dll files deleted.
10/01/11 16:25:16: DXWSetup: C:\Windows\system32\directx\websetup\dsetup32.dll files deleted.
10/01/11 16:27:16: DXWSetup: * DXWSETUP *.
10/01/11 16:27:16: DXWSetup: WinMain()
10/01/11 16:27:16: DXWSetup: IsIA64(): not IA64.
10/01/11 16:27:16: DXWSetup: impossible to target the Version on the file C:\Windows\system32\directx\websetup\dsetup.dll
10/01/11 16:27:16: DXWSetup: installed files C:\Windows\system32\directx\websetup\dsetup.dll
10/01/11 16:27:16: DXWSetup: impossible to target the Version on the file C:\Windows\system32\directx\websetup\dsetup32.dll
10/01/11 16:27:16: DXWSetup: installed files C:\Windows\system32\directx\websetup\dsetup32.dll
10/01/11 16:27:16: DXWSetup: GetDXVersion(): could not get the RC of the registry string.
10/01/11 16:27:16: DXWSetup: DirectX Version: 4.09.00.0904.00
10/01/11 16:27:16: DXWSetup: Setup Version: 4.09.00.0904.00
10/01/11 16:27:16: DXWSetup: a newer version of DirectX has already been installed.
10/01/11 16:27:25: DXWSetup: CDXWSetup::CDXWSetup()
10/01/11 16:27:25: DXWSetup: CDXWSetup::DownloadDXUpdate()
10/01/11 16:27:25: DXWSetup: OnEngineStatusChange(): EngineStatus = 0 x 1, subreport = 0 x 0
10/01/11 16:27:25: DXWSetup: OnEngineStatusChange(): EngineStatus = 0 x 3, subreport = 0 x 0
10/01/11 16:27:25: DXWSetup: OnEngineStatusChange(): EngineStatus = 0 x 2, SubStatus = 0 x 0
10/01/11 16:27:25: DXWSetup: OnStartInstall(): DLSize = 81, InstallSize = 0
10/01/11 16:27:25: DXWSetup: OnStartComponent(): ID = DXUpdate, DLSize = 81, InstallSize = 0, str = % DirectX_Setup %
10/01/11 16:27:25: DXWSetup: OnComponentProgress(): Phase = 0, = 0 progress
10/01/11 16:27:26: DXWSetup: OnStopComponent(): ID = DXUpdate, hr = 0 x 0, Phase = 9, str = % DirectX_Setup %, State = 0x0
10/01/11 16:27:26: DXWSetup: OnStopInstall(): hr = 0 x 0, str = (null), State = 0 x 0
10/01/11 16:27:26: DXWSetup: OnEngineStatusChange(): EngineStatus = 0 x 3, subreport = 0 x 0
10/01/11 16:27:26: DXWSetup: WM_APP_DOWNLOADDXUPDATE
10/01/11 16:27:26: DXWSetup: CDXWSetup::InitInstallEngine()
10/01/11 16:27:26: DXWSetup: CDXWSetup::InitInstallEngine(): Sections are not initialized.
10/01/11 16:27:26: DXWSetup: PreinstDlgProc(): CDXWSetup::InitInstallEngine() failed.
10/01/11 16:27:26: DXWSetup: WM_APP_ENDDOWNLOAD
10/01/11 16:27:36: DXWSetup: CDXWSetup::~CDXWSetup()
10/01/11 16:27:39: DXWSetup: CreatePropertySheet() returns-9.
10/01/11 16:27:39: DXWSetup: C:\Windows\system32\directx\websetup\dsetup.dll files deleted.
10/01/11 16:27:39: DXWSetup: C:\Windows\system32\directx\websetup\dsetup32.dll files deleted.
10/01/11 16:28:55: DXWSetup: * DXWSETUP *.
10/01/11 16:28:55: DXWSetup: WinMain()
10/01/11 16:28:55: DXWSetup: IsIA64(): not IA64.
10/01/11 16:28:56: DXWSetup: impossible to target the Version on the file C:\Windows\system32\directx\websetup\dsetup.dll
10/01/11 16:28:56: DXWSetup: installed files C:\Windows\system32\directx\websetup\dsetup.dll
10/01/11 16:28:56: DXWSetup: impossible to target the Version on the file C:\Windows\system32\directx\websetup\dsetup32.dll
10/01/11 16:28:56: DXWSetup: installed files C:\Windows\system32\directx\websetup\dsetup32.dll
10/01/11 16:28:56: DXWSetup: GetDXVersion(): could not get the RC of the registry string.
10/01/11 16:28:56: DXWSetup: DirectX Version: 4.09.00.0904.00
10/01/11 16:28:56: DXWSetup: Setup Version: 4.09.00.0904.00
10/01/11 16:28:56: DXWSetup: a newer version of DirectX has already been installed.
10/01/11 16:29:01: DXWSetup: CDXWSetup::CDXWSetup()
10/01/11 16:29:01: DXWSetup: CDXWSetup::DownloadDXUpdate()
10/01/11 16:29:01: DXWSetup: OnEngineStatusChange(): EngineStatus = 0 x 1, subreport = 0 x 0
10/01/11 16:29:01: DXWSetup: OnEngineStatusChange(): EngineStatus = 0 x 3, subreport = 0 x 0
10/01/11 16:29:01: DXWSetup: OnEngineStatusChange(): EngineStatus = 0 x 2, SubStatus = 0 x 0
10/01/11 16:29:01: DXWSetup: OnStartInstall(): DLSize = 81, InstallSize = 0
10/01/11 16:29:01: DXWSetup: OnStartComponent(): ID = DXUpdate, DLSize = 81, InstallSize = 0, str = % DirectX_Setup %
10/01/11 16:29:01: DXWSetup: OnComponentProgress(): Phase = 0, = 0 progress
10/01/11 16:29:01: DXWSetup: OnStopComponent(): ID = DXUpdate, hr = 0 x 0, Phase = 9, str = % DirectX_Setup %, State = 0x0
10/01/11 16:29:01: DXWSetup: OnStopInstall(): hr = 0 x 0, str = (null), State = 0 x 0
10/01/11 16:29:01: DXWSetup: OnEngineStatusChange(): EngineStatus = 0 x 3, subreport = 0 x 0
10/01/11 16:29:01: DXWSetup: WM_APP_DOWNLOADDXUPDATE
10/01/11 16:29:01: DXWSetup: CDXWSetup::InitInstallEngine()
10/01/11 16:29:01: DXWSetup: CDXWSetup::InitInstallEngine(): Sections are not initialized.
10/01/11 16:29:01: DXWSetup: PreinstDlgProc(): CDXWSetup::InitInstallEngine() failed.
10/01/11 16:29:01: DXWSetup: WM_APP_ENDDOWNLOAD
10/01/11 16:29:12: DXWSetup: CDXWSetup::~CDXWSetup()
10/01/11 16:29:14: DXWSetup: CreatePropertySheet() returns-9.
10/01/11 16:29:14: DXWSetup: C:\Windows\system32\directx\websetup\dsetup.dll files deleted.
10/01/11 16:29:14: DXWSetup: C:\Windows\system32\directx\websetup\dsetup32.dll files deleted.
10/01/11 16:29:49: DXWSetup: * DXWSETUP *.
10/01/11 16:29:49: DXWSetup: WinMain()
10/01/11 16:29:49: DXWSetup: IsIA64(): not IA64.
10/01/11 16:29:49: DXWSetup: impossible to target the Version on the file C:\Windows\system32\directx\websetup\dsetup.dll
10/01/11 16:29:49: DXWSetup: installed files C:\Windows\system32\directx\websetup\dsetup.dll
10/01/11 16:29:49: DXWSetup: impossible to target the Version on the file C:\Windows\system32\directx\websetup\dsetup32.dll
10/01/11 16:29:49: DXWSetup: installed files C:\Windows\system32\directx\websetup\dsetup32.dll
10/01/11 16:29:49: DXWSetup: GetDXVersion(): could not get the RC of the registry string.
10/01/11 16:29:49: DXWSetup: DirectX Version: 4.09.00.0904.00
10/01/11 16:29:49: DXWSetup: Setup Version: 4.09.00.0904.00
10/01/11 16:29:49: DXWSetup: a newer version of DirectX has already been installed.
10/01/11 16:29:56: DXWSetup: CDXWSetup::CDXWSetup()
10/01/11 16:29:56: DXWSetup: CDXWSetup::DownloadDXUpdate()
10/01/11 16:29:56: DXWSetup: OnEngineStatusChange(): EngineStatus = 0 x 1, subreport = 0 x 0
10/01/11 16:29:56: DXWSetup: OnEngineStatusChange(): EngineStatus = 0 x 3, subreport = 0 x 0
10/01/11 16:29:56: DXWSetup: OnEngineStatusChange(): EngineStatus = 0 x 2, SubStatus = 0 x 0
10/01/11 16:29:56: DXWSetup: OnStartInstall(): DLSize = 81, InstallSize = 0
10/01/11 16:29:56: DXWSetup: OnStartComponent(): ID = DXUpdate, DLSize = 81, InstallSize = 0, str = % DirectX_Setup %
10/01/11 16:29:56: DXWSetup: OnComponentProgress(): Phase = 0, = 0 progress
10/01/11 16:29:56: DXWSetup: OnStopComponent(): ID = DXUpdate, hr = 0 x 0, Phase = 9, str = % DirectX_Setup %, State = 0x0
10/01/11 16:29:56: DXWSetup: OnStopInstall(): hr = 0 x 0, str = (null), State = 0 x 0
10/01/11 16:29:56: DXWSetup: OnEngineStatusChange(): EngineStatus = 0 x 3, subreport = 0 x 0
10/01/11 16:29:56: DXWSetup: WM_APP_DOWNLOADDXUPDATE
10/01/11 16:29:56: DXWSetup: CDXWSetup::InitInstallEngine()
10/01/11 16:29:57: DXWSetup: CDXWSetup::InitInstallEngine(): Sections are not initialized.
10/01/11 16:29:57: DXWSetup: PreinstDlgProc(): CDXWSetup::InitInstallEngine() failed.
10/01/11 16:29:57: DXWSetup: WM_APP_ENDDOWNLOAD
10/01/11 16:30:46: DXWSetup: CDXWSetup::~CDXWSetup()
10/01/11 16:30:48: DXWSetup: CreatePropertySheet() returns-9.
10/01/11 16:30:48: DXWSetup: C:\Windows\system32\directx\websetup\dsetup.dll files deleted.
10/01/11 16:30:48: DXWSetup: C:\Windows\system32\directx\websetup\dsetup32.dll files deleted.
10/01/11 16:37:07: DXWSetup: * DXWSETUP *.
10/01/11 16:37:07: DXWSetup: WinMain()
10/01/11 16:37:07: DXWSetup: IsIA64(): not IA64.
10/01/11 16:37:07: DXWSetup: impossible to target the Version on the file C:\Windows\system32\directx\websetup\dsetup.dll
10/01/11 16:37:07: DXWSetup: C:\Windows\system32\directx\websetup\dsetup.dll installed files
10/01/11 16:37:07: DXWSetup: impossible to target the Version on the file C:\Windows\system32\directx\websetup\dsetup32.dll
10/01/11 16:37:07: DXWSetup: C:\Windows\system32\directx\websetup\dsetup32.dll installed files
10/01/11 16:37:07: DXWSetup: GetDXVersion(): could not get the RC of the registry string.
10/01/11 16:37:07: DXWSetup: DirectX Version: 4.09.00.0904.00
10/01/11 16:37:07: DXWSetup: Setup Version: 4.09.00.0904.00
10/01/11 16:37:07: DXWSetup: a newer version of DirectX has already been installed.
10/01/11 16:37:13: DXWSetup: CDXWSetup::CDXWSetup()
10/01/11 16:37:13: DXWSetup: CDXWSetup::DownloadDXUpdate()
10/01/11 16:37:13: DXWSetup: OnEngineStatusChange(): EngineStatus = 0 x 1, subreport = 0 x 0
10/01/11 16:37:13: DXWSetup: OnEngineStatusChange(): EngineStatus = 0 x 3, subreport = 0 x 0
10/01/11 16:37:13: DXWSetup: OnEngineStatusChange(): EngineStatus = 0 x 2, SubStatus = 0 x 0
10/01/11 16:37:13: DXWSetup: OnStartInstall(): DLSize = 81, InstallSize = 0
10/01/11 16:37:13: DXWSetup: OnStartComponent(): ID = DXUpdate, DLSize = 81, InstallSize = 0, str = % DirectX_Setup %
10/01/11 16:37:13: DXWSetup: OnComponentProgress(): Phase = 0, = 0 progress
10/01/11 16:37:13: DXWSetup: OnStopComponent(): ID = DXUpdate, hr = 0 x 0, Phase = 9, str = % DirectX_Setup %, State = 0x0
10/01/11 16:37:13: DXWSetup: OnStopInstall(): hr = 0 x 0, str = (null), State = 0 x 0
10/01/11 16:37:13: DXWSetup: OnEngineStatusChange(): EngineStatus = 0 x 3, subreport = 0 x 0
10/01/11 16:37:13: DXWSetup: WM_APP_DOWNLOADDXUPDATE
10/01/11 16:37:13: DXWSetup: CDXWSetup::InitInstallEngine()
10/01/11 16:37:13: DXWSetup: CDXWSetup::InitInstallEngine(): Sections are not initialized.
10/01/11 16:37:13: DXWSetup: PreinstDlgProc(): CDXWSetup::InitInstallEngine() failed.
10/01/11 16:37:13: DXWSetup: WM_APP_ENDDOWNLOAD
10/01/11 16:37:15: DXWSetup: CDXWSetup::~CDXWSetup()
10/01/11 16:37:16: DXWSetup: CreatePropertySheet() returns-9.
10/01/11 16:37:16: DXWSetup: C:\Windows\system32\directx\websetup\dsetup.dll files deleted.
10/01/11 16:37:16: DXWSetup: C:\Windows\system32\directx\websetup\dsetup32.dll files deleted.
10/01/11 16:56:38: DXWSetup: * DXWSETUP *.
10/01/11 16:56:38: DXWSetup: WinMain()
10/01/11 16:56:38: DXWSetup: IsIA64(): not IA64.
10/01/11 16:56:38: DXWSetup: impossible to target the Version on the file C:\Windows\system32\directx\websetup\dsetup.dll
10/01/11 16:56:38: DXWSetup: installed files C:\Windows\system32\directx\websetup\dsetup.dll
10/01/11 16:56:38: DXWSetup: impossible to target the Version on the file C:\Windows\system32\directx\websetup\dsetup32.dll
10/01/11 16:56:38: DXWSetup: installed files C:\Windows\system32\directx\websetup\dsetup32.dll
10/01/11 16:56:38: DXWSetup: GetDXVersion(): could not get the RC of the registry string.
10/01/11 16:56:38: DXWSetup: DirectX Version: 4.09.00.0904.00
10/01/11 16:56:38: DXWSetup: Setup Version: 4.09.00.0904.00
10/01/11 16:56:38: DXWSetup: a newer version of DirectX has already been installed.
10/01/11 16:56:45: DXWSetup: CDXWSetup::CDXWSetup()
10/01/11 16:56:45: DXWSetup: CDXWSetup::DownloadDXUpdate()
10/01/11 16:56:45: DXWSetup: OnEngineStatusChange(): EngineStatus = 0 x 1, subreport = 0 x 0
10/01/11 16:56:45: DXWSetup: OnEngineStatusChange(): EngineStatus = 0 x 3, subreport = 0 x 0
10/01/11 16:56:45: DXWSetup: OnEngineStatusChange(): EngineStatus = 0 x 2, SubStatus = 0 x 0
10/01/11 16:56:45: DXWSetup: OnStartInstall(): DLSize = 81, InstallSize = 0
10/01/11 16:56:45: DXWSetup: OnStartComponent(): ID = DXUpdate, DLSize = 81, InstallSize = 0, str = % DirectX_Setup %
10/01/11 16:56:45: DXWSetup: OnComponentProgress(): Phase = 0, = 0 progress
10/01/11 16:56:45: DXWSetup: OnStopComponent(): ID = DXUpdate, hr = 0 x 0, Phase = 9, str = % DirectX_Setup %, State = 0x0
10/01/11 16:56:45: DXWSetup: OnStopInstall(): hr = 0 x 0, str = (null), State = 0 x 0
10/01/11 16:56:45: DXWSetup: OnEngineStatusChange(): EngineStatus = 0 x 3, subreport = 0 x 0
10/01/11 16:56:45: DXWSetup: WM_APP_DOWNLOADDXUPDATE
10/01/11 16:56:45: DXWSetup: CDXWSetup::InitInstallEngine()
10/01/11 16:56:45: DXWSetup: CDXWSetup::InitInstallEngine(): Sections are not initialized.
10/01/11 16:56:45: DXWSetup: PreinstDlgProc(): CDXWSetup::InitInstallEngine() failed.
10/01/11 16:56:45: DXWSetup: WM_APP_ENDDOWNLOAD
10/01/11 16:56:47: DXWSetup: CDXWSetup::~CDXWSetup()
10/01/11 16:56:48: DXWSetup: CreatePropertySheet() returns-9.
10/01/11 16:56:48: DXWSetup: C:\Windows\system32\directx\websetup\dsetup.dll files deleted.
10/01/11 16:56:49: DXWSetup: C:\Windows\system32\directx\websetup\dsetup32.dll files deleted.
10/01/11 18:38:56: DXWSetup: * DXWSETUP *.
10/01/11 18:38:56: DXWSetup: WinMain()
10/01/11 18:38:56: DXWSetup: IsIA64(): not IA64.
10/01/11 18:38:57: DXWSetup: impossible to target the Version on the file C:\Windows\system32\directx\websetup\dsetup.dll
10/01/11 18:38:57: DXWSetup: installed files C:\Windows\system32\directx\websetup\dsetup.dll
10/01/11 18:38:57: DXWSetup: impossible to target the Version on the file C:\Windows\system32\directx\websetup\dsetup32.dll
10/01/11 18:38:57: DXWSetup: installed files C:\Windows\system32\directx\websetup\dsetup32.dll
10/01/11 18:38:57: DXWSetup: GetDXVersion(): could not get the RC of the registry string.
10/01/11 18:38:57: DXWSetup: DirectX Version: 4.09.00.0904.00
10/01/11 18:38:57: DXWSetup: Setup Version: 4.09.00.0904.00
10/01/11 18:38:57: DXWSetup: a newer version of DirectX has already been installed.
10/01/11 18:38:57: dsetup32: IsWow64(): not the Wow64 process.
10/01/11 18:39:01: DXWSetup: CDXWSetup::CDXWSetup()
10/01/11 18:39:01: DXWSetup: CDXWSetup::DownloadDXUpdate()
10/01/11 18:39:01: DXWSetup: OnEngineStatusChange(): EngineStatus = 0 x 1, subreport = 0 x 0
10/01/11 18:39:01: DXWSetup: OnEngineStatusChange(): EngineStatus = 0 x 3, subreport = 0 x 0
10/01/11 18:39:01: DXWSetup: OnEngineStatusChange(): EngineStatus = 0 x 2, SubStatus = 0 x 0
10/01/11 18:39:01: DXWSetup: OnStartInstall(): DLSize = 81, InstallSize = 0
10/01/11 18:39:01: DXWSetup: OnStartComponent(): ID = DXUpdate, DLSize = 81, InstallSize = 0, str = % DirectX_Setup %
10/01/11 18:39:01: DXWSetup: OnComponentProgress(): Phase = 0, = 0 progress
10/01/11 18:39:05: DXWSetup: OnStopComponent(): ID = DXUpdate, hr = 0 x 0, Phase = 9, str = % DirectX_Setup %, State = 0x0
10/01/11 18:39:05: DXWSetup: OnStopInstall(): hr = 0 x 0, str = (null), State = 0 x 0
10/01/11 18:39:05: DXWSetup: OnEngineStatusChange(): EngineStatus = 0 x 3, subreport = 0 x 0
10/01/11 18:39:05: DXWSetup: WM_APP_DOWNLOADDXUPDATE
10/01/11 18:39:05: DXWSetup: CDXWSetup::InitInstallEngine()
10/01/11 18:39:05: DXWSetup: CDXWSetup::InitInstallEngine(): Sections are not initialized.
10/01/11 18:39:05: DXWSetup: PreinstDlgProc(): CDXWSetup::InitInstallEngine() failed.
10/01/11 18:39:05: DXWSetup: WM_APP_ENDDOWNLOAD
10/01/11 18:39:11: DXWSetup: CDXWSetup::~CDXWSetup()
10/01/11 18:39:14: DXWSetup: CreatePropertySheet() returns-9.
10/01/11 18:39:14: DXWSetup: C:\Windows\system32\directx\websetup\dsetup.dll files deleted.
10/01/11 18:39:14: DXWSetup: C:\Windows\system32\directx\websetup\dsetup32.dll files deleted.
11/01/11 08:44:55: DXWSetup: * DXWSETUP *.
11/01/11 08:44:55: DXWSetup: WinMain()
11/01/11 08:44:55: DXWSetup: IsIA64(): not IA64.
11/01/11 08:44:55: DXWSetup: impossible to target the Version on the file C:\Windows\system32\directx\websetup\dsetup.dll
11/01/11 08:44:55: DXWSetup: installed files C:\Windows\system32\directx\websetup\dsetup.dll
11/01/11 08:44:55: DXWSetup: impossible to target the Version on the file C:\Windows\system32\directx\websetup\dsetup32.dll
11/01/11 08:44:55: DXWSetup: installed files C:\Windows\system32\directx\websetup\dsetup32.dll
11/01/11 08:44:55: DXWSetup: GetDXVersion(): could not get the RC of the registry string.
11/01/11 08:44:55: DXWSetup: DirectX Version: 4.09.00.0904.00
11/01/11 08:44:55: DXWSetup: Setup Version: 4.09.00.0904.00
11/01/11 08:44:55: DXWSetup: a newer version of DirectX has already been installed.
11/01/11 08:44:56: dsetup32: IsWow64(): not the Wow64 process.
11/01/11 08:45:02: DXWSetup: CDXWSetup::CDXWSetup()
11/01/11 08:45:02: DXWSetup: CDXWSetup::DownloadDXUpdate()
11/01/11 08:45:02: DXWSetup: OnEngineStatusChange(): EngineStatus = 0 x 1, subreport = 0 x 0
11/01/11 08:45:02: DXWSetup: OnEngineStatusChange(): EngineStatus = 0 x 3, subreport = 0 x 0
11/01/11 08:45:02: DXWSetup: OnEngineStatusChange(): EngineStatus = 0 x 2, SubStatus = 0 x 0
11/01/11 08:45:02: DXWSetup: OnStartInstall(): DLSize = 81, InstallSize = 0
11/01/11 08:45:02: DXWSetup: OnStartComponent(): ID = DXUpdate, DLSize = 81, InstallSize = 0, str = % DirectX_Setup %
11/01/11 08:45:02: DXWSetup: OnComponentProgress(): Phase = 0, = 0 progress
11/01/11 08:45:06: DXWSetup: OnStopComponent(): ID = DXUpdate, hr = 0 x 0, Phase = 9, str = % DirectX_Setup %, State = 0x0
11/01/11 08:45:06: DXWSetup: OnStopInstall(): hr = 0 x 0, str = (null), State = 0 x 0
11/01/11 08:45:06: DXWSetup: OnEngineStatusChange(): EngineStatus = 0 x 3, subreport = 0 x 0
11/01/11 08:45:06: DXWSetup: WM_APP_DOWNLOADDXUPDATE
11/01/11 08:45:06: DXWSetup: CDXWSetup::InitInstallEngine()
11/01/11 08:45:06: DXWSetup: CDXWSetup::InitInstallEngine(): Sections are not initialized.
11/01/11 08:45:06: DXWSetup: PreinstDlgProc(): CDXWSetup::InitInstallEngine() failed.
11/01/11 08:45:06: DXWSetup: WM_APP_ENDDOWNLOAD
11/01/11 08:55:23: DXWSetup: CDXWSetup::~CDXWSetup()
11/01/11 08:55:26: DXWSetup: CreatePropertySheet() returns-9.
11/01/11 08:55:26: DXWSetup: C:\Windows\system32\directx\websetup\dsetup.dll files deleted.
11/01/11 08:55:26: DXWSetup: C:\Windows\system32\directx\websetup\dsetup32.dll files deleted.

Any help that you can give the question is appreciated. Thank you!

Hello

According to me, that your request would be better supprted in community platforms of the pénis. Here is a link that should point you in the right location. I hope that this information is beneficial.

http://www.rigsofrods.com/forum.php

Thank you

Aaron
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think

I get an error when you start the process of windows 7 installation on ubuntu 9.04

I'm on ubuntu 9.04 and I do not so I wanted to install windows 7 on it, but after clicking on install on Windows 7, the installation of a temporary file stops after 10 seconds with an error message:
"Windows is unable to find a place to store temporary installation files. To install windows ensure that a partition on your startup disk has at least 685 MB of free space. Error code 0 x 80070490

Please help me and am using ubuntu 9.04

You will need to repartition your hard disk, so that Windows does not recognize the file system that Ubuntu Linux uses by default (which is ext3). You can do within Ubuntu Linux using several different tools, or if you are more interested in the use of Ubuntu Linux you can repartition the disk in the installation of Windows.

PLEASE NOTE: The following allows you to delete all the data contained on your hard drive. I can't be held responsible for any data loss that may be incurred. Please make sure that you back up your data before you run the following commands. Use at your own risk.

Repartition the drive by using the Windows installation:

1. Insert the Windows 7 installation in your DVD Player DVD.
2. restart your computer and boot from the DVD drive when asked ("press any key to boot from the CD or DVD... »)
3 Windows Setup will load, give him a few moments.
4. When you see the installation screen of Windows 7 with "Windows Installer", press SHIFT + F10.
5. in the command prompt window that appears, type diskpart and press ENTER.
6. at the diskpart prompt, type select disk 0and press ENTER.
7. at the diskpart prompt, type cleanand then press ENTER.
8. the DiskPart utility removes all partitions on the hard drive as well as the master boot record (MBR).
9. at the diskpart prompt, type exit and press ENTER.
10. in the command prompt window, type exit.
11. click on install Windows and follow the on-screen instructions.

Kristan M. Kenney ("Nighthawk64"). My Blog: http://blog.kristankenney.com

Error when you run the setEssbaseEnv.sh script

Hi all
In the 11.1.2.x version:
MIDDLEWARE_HOME/EPMSystem11R1/products/Essbase/EssbaseServer/templates/startMaxl.sh
Scripts call another script, setEssbaseEnv.sh. When you run the script 'setEssbaseEnv.sh' it gives the error below:
$ sh setEssbaseEnv.sh
setEssbaseEnv.sh: line 4: close syntax error unexpected token ' (')
setEssbaseEnv.sh: line 4: "cd $J (EPM_ORACLE_INSTANCE) / bin /".

Why use only the location of the templates? There should be a bin folder.

Concerning

Celvin Kattookaran

get the error when you use the TRIM method in the collections

Hi Experts,
When you use the TRIM method I get below error. I make any mistake here?
DB: Oracle 11g

SQL > declare

2

emp_tab of type 3 is the employee table % rowtype index directory.

4 l_emp_tab emp_tab;
5

6 start

7

8 select * bulk collect into l_emp_tab of employees;

9 l_emp_tab.trim (5);

10 dbms_output.put_line (l_emp_tab.count);

11

12 end;

13.

l_emp_tab. Trim (5);

*

ERROR on line 9:

ORA-06550: line 9, column 2:

PLS-00306: wrong number or types of arguments in the call to 'TRIM '.

ORA-06550: line 9, column 2:

PL/SQL: Statement ignored

Thanks in advance for your help.
See you soon,.
Suri

For PL/SQL collections "index by" you cannot use the TRIM function. If your collection statement excludes the portion "index of...» ", then you can.

Gerard

Certificate error when you download the trial version of the EP 12

I get this error when you try to download the trial version.

Use another browser.

error when you use the Export-CSV cmdlet

Hello
I get the following error when you try to pipe the output to a csv file
" Could not bind the parameter argument 'InputObject' because she's nowhere.'"
The output is placed in the csv file, but I get this error at the end of the script.
Here is the code:
##Variables
###################################
$report = @)
$CSVfile = "d:\Vm_Report.csv".
$VMs = get-vmhost | Get - VM
###################################
{foreach ($VM to $VMs)
$VMx = get-view $VM.ID
$HW = $VMx.guest.net
foreach ($dev to $HW)
{
foreach ($ip in $dev.ipaddress)
{
$report += $dev. Select @{Name = 'Name'; Expression = {$vm.name}},@{Name = 'IP address'; Expression = {$ip}}, @{Name = 'MAC'; {Expression = {$dev.macaddress}}.
@{Name = 'Property DL'; Expression = {$vm. CustomFields}}
}
}
}
$report | Export-CSV - NoTypeInformation $CSVfile
Thank you

The attached script implements the test of the $HW variable.

In my test environment, Export-Csv now works without any problem.

Give it a try.

Network connectivity error when you configure the server for vSphere

Similar Questions

Maybe you are looking for