Network Expert please! Connection Wifi/ethernet Vista64 last 5 minutes

Vista will not occupy a connection to the modem 2wire 25 feet in the other room! Here's my equipment as well as a list of things that I tried to fix the problem!

  • 2Wire modem (a/b/g compatible only) connected to the extreme network of apple (compatible N) (for the range)
  • I have a portable macintosh with wifi card that works 100% of the time connection ETC...
  • I also have an access point Wi - Fi trendnet for connection to my xbox tew-647 (works great)
  • Wifi Realtek 8168 G card (connects to the network, but will not have access to the internet)
  • Just bought a Netgear base 5 port 10/100 switch (I have hooked up to the netgear access point (which enabled me to get internet now for up to 5 minutes before zero and a constant flow of my xbox and works perfectly for the xbox, but not PC))
Things that I tried to make this thing work and get the internet on a constant basis
  1. all of the bases for the creation of an internet connection via windows.
  2. Reinstall the Wi - Fi card and drivers updated, etc... (vista compatible)
  3. updated NETWORK adapter drivers reinstalled etc...
  4. Microsoft Fix it
  5. A crossed the CMD Prompt to reset the IP addresses and other
  6. turn any firewall on your pc off / on the 2wire router does not allow me to turn off the firewall, allow all programs to cross, and Setup!
  7. I finally reinstalled windows vista64 w / sp1 didn't work
  8. Installed SP2 still the same issue
Things I noticed
I can't connect to Yahoo messenger when internet is available
I tried to download windows live essentals and he kills the internet connection every time
Can someone please give some good advice or a decent Effort as to help me with this problem?
Thank you
Jay

You have both a NETWORK adapter and a wireless card and they are enabled and active?  Why do you need them both, or how you use both?

Sure you have the correct drivers for the Realtek 8168 G wifi card?  I looked for some time and found no drivers for this card anywhere.

Confirmed the settings to connect to the ISP?  The fact that you can connect suggests they are OK, but there may be a setting that works for most, but boasts a better framework that will solve the problem.

After all, you did, I suspect you have a hardware problem with the card to be used for the internet connection.  Make sure that it is installed on the motherboard, or however it is connected (and use a different slot if one is available).  If you have another computer that can handle the card, try the card in this computer to see if it works it - who will tell us if it is the card or computer.  It is difficult to say without testing and I don't want to jump the gun on a recommendation, but I suspect that it will need to be replaced.

Thanks in advance for the reply with answers and for trying the test of the swap (which tell us a lot if you do-even if you need to borrow from a friend "computer s for a while run the test).

I hope this helps.

Good luck!

Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

Tags: Windows

Similar Questions

  • Establishment of a network without internet connection wifi

    I'll set up a wifi network in a place WITHOUT an internet connection.

    I have an Airport Express to the location and my MacBookAir.

    I have a Samsung smart TV in the place and I would like to use it to watch the content on my laptop (iTunes and elements in the movies folder), but can't find a way to do it. I tried an AppleTV 3rd generation, but which will not work because it requires an internet connection to complete upward. I'm not having luck with Airplay or mirror screen either. I tried a Thunderbolt/HDMI converter and I can get the picture on the TV, but the sound comes through my laptop. It is annoying because the TV is connected to a decent sound system.

    The TV has two HDMI ports, one for the cable/satellite and one for a DVD player (MHL / DVI). It also has an ethernet port and a USB port.

    I would like to * fine * want to stream from my laptop to my TV, but if I can't do that, I'll do it, installs for all cable set up will get the video and audio into the TV. Y at - it a box of streaming that doesn't require Internet?

    Welcome suggestions, especially if they are in basic English, I'm really bad at the net jargon.

    Thanks in advance!

    You can be very sure that other people have tried.

    Solution of workaround for apple tv without an internet connection?

    Just using a tethered phone or even dial-up internet so that DRM can work would help.

    http://physedagogy.com/2014/09/25/no-Wi-Fi-no-problem-using-Apple-TV-to-mirror-y our device without wifi.

    A lot of blogs on this topic and a lot of useful info in some of the answers.

    Y at - it a box of streaming that doesn't require Internet?

    Loads of them... look for the Plex.

    The problem is (most legitimate at least) media sources tend to put a priority on the establishment of copyright law.

    I tried a Thunderbolt/HDMI converter and I can get the picture on the TV, but the sound comes through my laptop. It is annoying because the TV is connected to a decent sound system.

    Switch sound on hdmi.

    IA-Thunderbolt-HDMI-connecting-to-HDTV http://Apple.StackExchange.com/questions/92493/How-can-i-Troubleshoot-no-audio-v

    Again, you are not the first to have the problem... loads of experience if you googled around to find out how to get his work... or if the laptop is a model then it might be impossible.

    Apple makes things difficult when you don't have internet... it is just to have a tethered phone and really just do the little bit of work involved in the installer... or the same 56 Kbps dial-up modem.

  • Windows 7 Pro - unidentified network domain PC connected Via Ethernet

    Hello - we have several machines Windows 7 is joined to our domain.  Recently when move us a PC from one place in the building to the other and connect them to wired ethernet, they get the 'unidentified network' and it shows as 'public '.  If plug back us them on their original network node, it works very well and finds the network, no problem.

    I did all the deforestation of the intellectual property, the command netsh, updated drivers, etc., but does not know what is happening.  Nothing has changed on the switches.  If I move a Windows XP computer, it works as expected.

    Thanks for your help!

    Hello jrennard3,

    Welcome to the Microsoft Community Forum.

    These computers are connected to the domain network, the question you posted would be better suited in the TechNet Forums.

    I would recommend posting your query in the TechNet Forums :

    http://social.technet.Microsoft.com/forums/Windows/en-us/home?category=w7itpro

    Thank you.

  • Unidentified (on Windows 8 connected by Ethernet to Windows 7) wifi-connected shared network

    Hello

    My PC W8 was connected by ethernet to my W7 laptop computer, which is connected by wifi. (Because I don't get my pci wifi card).

    The connection was very good, no problem. But since this morning, my W8 lost the connection, and I have the following message "unidentified network / limited. Moreover, when I use Windows Network Diagnostics it tells me "Ethernet is not a valid IP configuration.

    I tried to restart the PC, Router 2, but nothing.

    Thanks for your help

    I filled the ethernet connection with the wireless, and it works.

    Now, I have internet.

    That's what I did: https://www.youtube.com/watch?v=8z3V8LJIy8g

  • Can NOT CONNECT to PC RUNNING WINDOWS 8 - only "your PC is offline.". Please sign in with the last password used on this computer. »

    I'm so angry. I did everything and I can't connect my new pc Windows 8! I live in New Jersey and set up my network connection there, but I'm going to school in California (where I don't had not set up a connection without wire/local). I have configured my pc via a microsoft account and now it does not allow me to log in because I am not connected to the internet and can not connect to the internet. I can not update/use command prompt to connect to the wifi/etc. because all actions require my password. I even tried to use an Ethernet cable. Nothing works! He always says "your PC is offline.". Please sign in with the last password used on this computer. "I HAVE NOT CHANGED MY PASSWORD! and my account has not been hacked. This problem is simply my inability to connect to the internet. It's BS. Microsoft, you better come up with a fix for this young! If anyone has found a solution to this problem, please answer! I have very important files/software that I can't simply delete. This bug is much too big for Microsoft to miss and should be fixed immediately. How am I supposed to use this PC for school?

    But... In order to implement a local account, you must first connect to the Microsoft account that brings back us to the same error.  I had this problem as well and he needs to be addressed.  Whenever you walk away a network before installation on your PC/laptop, you will have this problem.  Try this... turn off PC/laptop, then go to another computer and sign in to Microsoft Web site account.  Connect with an Ethernet cable and turn on your PC/laptop with the connection problem and try to connect again.  It should work.

  • Connection wifi MacBook largue network from the internet

    My home network goes down internet connection when I connect to my router wireless with my mac pro book. There are 5 other devices connected in wifi and the system is stable for days if my macbook is not connected. Other devices include iphone, android phone, kindle, another a little newer macbook pro. If I connect to the router by ethernet cable, the system is completely stable. As soon as I start my wifi device on my mac pro book and log on to the network, the drops of internet connection to all devices on the network and I have to power cycle the router. The router is relatively new (less than a year). It's a TRENDnet TEW 812DRU. This problem moved not initially. My laptop works fine on all other wifi networks, that I connect.

    Don't forget to set the "link-local only" or off IPv6.

  • WiFi connection issue after the last update of Windows

    After that the last Window XP updated, I faced a problem connecting wifi internet.

    I (and others I know) get the question when trying to connect to the wifi. One of my friends has windows 7 and had the same problem. Personally, I have two laptops (Thinkpad T43 and T60), the T43 has only been affected. I did a lot of tests (tests of ipconfig, ping, etc.) and found what could be the problem.

    I found that I was not able to conect to my router. I changed my wifi to no (no wep or wpa key) security configuration. At that time, I was able to connect to the internet. I changed my wireless security to WEP key with special characters again and wasn't able to reach my router connection. However, when I changed my WEP key of only alphanumeric characters that has worked. With the WPA key, I am not able to connect to my wifi.

    My laptop is an old but a friend to me as a new brand.

    I have the feeling that there could be a conflict with some brands of wireless cards. I have an Intel Pro 2200BG in the T43 a different in the T60. In my tests, I used the same configurations as my other laptop which doesn't have any problem. I used the same radio channel and values. I would like to get the thoughts of an expert to properly solve the problem

    Thank you

    Problem fixed

    With 2 other people with the same problem (one called me an hour ago!) after the last window xp SP3 update and glancing again Ipconfig. I found that the tcp/ip seem to have been corrupted by the update. Then, I applied the following command at the command prompt: netsh int ip reset resetlog.txt , and then restart the computer.

    This time, the command ipconfig showed information that makes sense! And three laptops with windows XP pro SP3 were able to successfully connect to any Protocol (wpa, wpa2, wep).

    I conclude this post by saying that, probably one of the last update of security for windows XP corrupted the TCP/IP Protocol and we had to reset correctly to solve the problem.

  • {2540p here} Activate wifi while connected to ethernet

    I want to connect my iPhone to my Wired laptop as described here http://www.ehow.com/how_6829772_configure-ad-hoc-wireless-network.html

    But unfortunately this does not work because my laptop turns off his wifi card when it is connected to ethernet via the lan.

    How can I solve this?

    Hello:

    Go into the BIOS.  I'm not familiar with the exact menus in BIOS 2540p, but if there is a device configuration menu, find the LAN/WLAN switching option and set it to disabled.

    Somewhere there is a LAN/WLAN, commissioning to enable or disable.

    The theory is that if the laptop is connected to an ethernet cable, then the without wire is not needed and visa versa, then the default settings are enabled.

  • Is it possible to use the Remote app with the Apple TV connected via ethernet and iPhone via WiFi?

    Is it possible to use the Remote app with the Apple TV connected via ethernet and iPhone via WiFi? When I try this Apple TV does not appear in the list of devices on my iPhone.

    Yes, I'm doing exactly this with the same put in place.

    If the problem persists the next relative to the following articles might help you.

    Troubleshooting home sharing

  • My wifi network does not connect automatically

    Hi all

    im a user frustrated.

    My wifi network does not connect automatically, keeps asking me the password (even if I continue to score for remembering network). The password does not change.

    I also deleted the list of networks do not forget and do it again. Any help?

    Much appreciated guys.

    create another user account and start to this account, set up a wi - fi connection and restart to this account.

    Is the same behavior?

  • My ipad cann't detect any wifi network. Please help me

    My Ipad cann't detect any wi - fi network. I rest a network setting, press power and home button and reboot several times. But can't detect any wifi network. Please suggest what I can do.

    Take a look at this Apple Support article:

    https://support.Apple.com/en-us/HT204051

    Reset your network settings.

    Settings - general - reset - reset the network settings

    Reset your device. This will not erase your data stored on the phone.

    • Press and hold the sleep/wake button
    • Press and hold the Home button
    • Press and hold both buttons until the display turns off and on again with the Apple logo on the subject.

    Alternatively, you can go to settings - general - reset - Reset all settings

  • I am not able to connect to the main wifi network but can connect to the network of comments.

    Hello

    This is something new, I am facing to where I am not able to connect to a main network of airport extreme, but can connect to the network of comments. Guest network works perfectly fine while the main network does not connect to devices in the home. I also found that none of my base stations are visible in the airport utility (I Airpot extreme and Airport Express on the same network). Help, please.

    The first step in troubleshooting with this type of problem is to perform a complete network power cycle on your network. If you decide to do...

    Power off all the devices on your network... modem, routers, computers, printers, etc... in any order you want.

    Wait a minute

    Turn on the modem first and leave a few minutes, he managed by itself

    Turn on the next device that is connected to a modem and leaves turn a good minute

    Keep turn on devices one by one at a time, one minute apart, until the entire network is back

    Recheck the network and report on your results

  • Unable to connect when I try to sign, he said: "your computer is offline. Please sign in with the last password used on this computer. »

    Original title: Unable to connect

    Ok. So I'm having a few problems to connect to my computer windows laptop 8. I have reset my password like 5 times, restarted my computer over the same period of time, and I can not even sign. When I try to sign, it says: "your computer is offline. Please sign in with the last password used on this computer. "Well, I don't know what was the last password. I'm sure that the last time I registered on my laptop, I used the PIN that I used to have for her. The only reason why I changed it was because I wanted it to be more difficult to get into my PC. But I wanted more difficult for other people, not more difficult for me. Can someone help me with this please?

    Hi Arianna,.

    Thanks for posting your query on the Microsoft Community.

    I understand the inconvenience caused to you. I'll be happy to help you with your problem.

    I suggest you refer to the suggestion given in the thread and check out them below if it can help solve your problem:

    http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-security/whats-the-fix-for-your-PC-is-offline-please-sign/fd7dc731-6e23-4044-BFEE-dd8fbb42fc32

    Let us know the status of the issue. We will be happy to help you further.

    Thank you.

  • Remote Access connects with shared connection, but when I connect the Ethernet to the box Belkin Wireless cable, there is no network connection

    I have dial-up internet. I have to computers. A PC running XP and a laptop that is running Windows 7.
    I have the connection shared, if I plug the Ethernet cable to the laptop, it will connect to the internet. I just bought a Belkin G wireless router.
    I want to know how to configure it, then the router Belkin Wireless put the switched signal shared wireless. I know it's possible, I'm not sure what I'm doing wrong. It is constantly with him saying on the phone "the DNS server does not respond.

    Connect the Ethernet cable from your PC to the WAN (Internet) port on the wireless router.  Do not connect to one of the router's LAN ports. Boulder computer Maven
    Most Microsoft Valuable Professional

  • Connection WiFi guard fall on my new laptop of HP ENVY m6-k025dx Sleekbook.

    Hello

    I just got my laptop new HP ENVY. Name of product: m6-k025dx. It works on 64-bit Windows 8. I feel a sudden loss and frequent my Wifi connection. When it disconnects, I don't even connect it to cursor (that slides off the right side of the screen and displays the network list) by clicking on the network down button to the right of the screen. I have to restart my laptop to connect again and after 5-7 minutes, I lose again.

    I have tried many suggestions on the amendment to the Plan of power for maximum performance and uncheck "Allow the computer to turn off this device to save power", but nothing seems to work.

    The network driver is Intel Centrino Wireless - N 2230. I have also updated the driver and off Bluetooth and ethernet as part of suggestions found on the web.

    I don't know if it is a problem of Windows 8 / Intel / HP. Help, please.

    Nadeem

    From my own research, if you have an intel centrino N - 2230 network adapter and use 8 64-bit windows, you need a new driver. This adapter has connectivity wifi which are known for problems intel. Check here: http://www.intel.com/support/wireless/wlan/sb/CS-025332.htm and then contact an HP tech via chat and they correct Web site, download and install the new driver from intel. I tried to do it myself, and it did not work. The technology did for me by online chat and remote assistance. Do it for what they tell you it's a hardware problem. It's a problem of network adapter that requires an updated driver. Let me know if it works for you.

Maybe you are looking for

  • A page on a site does not load in Windows 10 or El Capitan

    From about two weeks, when I try to access www.steepandcheap.com/current-steal with the current version of Firefox on Windows 10, I can't. It is not that I get an error message, it's just like the page no longer exists, and I redirected to the main s

  • Qosmio F60 - 111 - giving speaker static

    Hello I got my qosmio a month ago and 2 weeks in I installed the updates that the bulletin board toshiba told me. I then started to mix static on the left and right speakers. Two sound drivers I have installed the toshiba site (which are the same dri

  • Slate professionals or just a self-help group?

    Although efforts to help members is very popular (cordially to rainmanP), I feel rather, I joined a discussion that one club Professional advice for a series of professional equipment. except breaks the rules his readers are left in the speculation.

  • Virtual pc XP to run 7

    I am currently running windows xp pro sp2 with 512 MB of ram, I want to install windows 7 via virtual pc, but I can not increase by more than 300 something ram on VPC, how can I DO? How can I increase graphic ram, rather than only the RAM?

  • ePrint versus ePrint Mobile - and Activation of ePrint

    Using my iPad, I installed the app on the Apple store ePrint.  What is the ePrint moble app?  Nothing on the Apple store indicates whether - or if it's just the "plain" ePrint application   Using the application that I have (whichever it is), I can n