network location detection. Failed with error 0x8007007E: the specified module could not be found

Using the internet connection at home:

Identification of network adapter

Error failed with error 0x8007007E: the specified module could not be found

Hi JimQv,

Check to see if the following is useful.

Method 1: Run that this automated convenience store and look for the question.

Improve performance and security in Internet Explorer

Method 2: You can try to optimize Internet Explorer and see if it makes a difference. Follow steps 2, 3 and 4 of this article.

Internet Explorer is slow? 5 things to try

Tags: Windows

Similar Questions

  • Error 0x8007007E: the specified module could not be found. -Cannot add information to MP3 files.

    I use Windows Vista Home Premium - I get this error message when I try to add information to the MP3 files that have been downloaded.  MP3 CD files are fine, but the albums that i've got from amazon/play etc have no song on them information.  It's just empty.  It comes to getting the error message:

    Apply the properties file
    An unexpected error prevented the operation.  Make a note of this error code, which might be useful if you get additional help to resolve this problem:

    Error 0x8007007E: the specified module could not be found.

    I downloaded a converter of flac the 21 day trial yesterday for a few songs that I had been sent - after I had converted to them I realized how stupid could download a trial for a product, then I tried to delete the folder.  One of the files inside not to remove (I finally got rid of him after cutting, gluing then delete), and this is after I initially deleted the contents of the file converter flac mp3 information has been destroyed and would not change.

    If anyone has an idea how to solve this problem - or even about what exactly I did to cause the problem - please help!

    Hey
    Try the steps in the article

    http://www.ehow.com/how_5705635_correct-tags-Windows-Media-Player.html

    Bravo!

  • Error "failed to loadlibrary error 126: the specified module could not be found" when you install the program

    Original title: error massage

    every time I load the software and then try to open it I failed to loadlibrary error 126: the specified module could not be found

    What can I do to fix this problem

    Hello rayl48,

    In addition to what offers Syed, you could try and update your video card driver.
    I saw the mention that the error is caused by a pilot video obsolete.
    Go to the website of the manufacturer of your video card and download the latest driver for your video card model.

    Or you can go to the computer manufacturer and seeif he is and he's driving for your computer updated model.

    Sincerely,

    Marilyn
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think

  • Windows Defender error 126: the specified module could not be found

    How to fix Windows Defender on Windows 7?

    For some time now, Windows Defender no longer works. I can't install new updates of definition and the service cannot be started. If I try to manually start the Windows Defender service, there is an error message:

    "Error 126: the specified module could not be found.

    However, I can launch the GUI of C:\Program Files\Windows Defender Defender. However, I tried to download the Windows Defender from Microsoft, but the installer launches because it is said that Defender is already part of Windows 7 x 64.

    I'm really looking for a way to get Windows Defender to rework.

    First of all, it's what I already know and what I don't want:

    • I don't want to disable Windows defender, I want to make it work again
    • I have no antivirus uninstalled or disabled Windows Defender software, the module really seems to be corrupted (I am software engineer)
    • I don't want to reinstall Windows or use the backup, because I don't know how far I have to go back
    • Windows Defender can be removed from the menu of functions and software, because it is part of the operating system
    • I do not have MSE installed, tried to install it, haven't changed a thing

    Any solution to solve this is appreciated. Advanced solutions (Registry hacks, enveloping, manual installs, work...) Welcome!

    Kind regards

    Florian

    I was able to fix this on my own. It seems that the registry has been damaged (as I thought).

    Changed the DisplayName property is property in the register of "Windows Defender" to "@%ProgramFiles%\\Windows Defender\\MsMpRes.dll,-103" which in reality should not be the cause of the problem, however, the DisplayName property original of the resource file.

    ServiceDll property have been replaced in the registry of
     
    hex (2): 25, 50, 00, 00, 6f 72, 00, 00, 67, 00, 72, 00, 61, 00, 6 d, 00, 00, 46, 69,--------.
    00, 6 c, 00, 65, 00, 73, 00, 25, 00, 5 c, 00, 00, 69, 57, 00, 6F, 00, 64, 00, 6f, 00, 00, 73, 77, 00,------.
    20,00,44,00,65,00,66,00,65,00, 6F, 00, 64, 00, 65, 00, 72, 00, 5 C, 00, 6 D, 00, 00, 70, 73,------.
    00,76,00,63,00, 2nd, 00, 64, 00, 6 c, 00, 6 c, 00, 00, 00

    TO

    hex (2): 25, 50, 00, 00, 6f 72, 00, 00, 67, 00, 72, 00, 61, 00, 6 d, 00, 00, 46, 69,--------.
    00, 6 C, 00, 65, 00, 73, 00, 28, 00, 78, 00, 38, 00, 36, 00, 29, 00, 25, 00, 5 C 00, 57, 00, 69, 00,------.
    6th, 00, 64, 00, 6f, 00, 77, 00, 73, 00, 20, 00, 44, 00, 65, 00, 00, 65, 66, 00, 6F, 00, 00, 64, 65,.
    00,72,00, 5 c, 00, 6 d, 00, 70, 00, 73, 00, 76, 00, 63, 00, 2nd, 00, 64, 00, 6 c, 00, 6 c, 00, 00, 00

    in fact, which solves the problem. WIndows Defender is now in service yet. Updates can also be installed again.

  • Issues with Kodak Easyshare - the specified module could not be found

    original title: problems with Kodak Easyshare

    I uninstalled the Kodak Easyshare software, but I get the following message every time I start my computer.  Error loading C:\PROGRA~2\Kodak\EasyshareSetup\$REGIS~1\Registration_7.8.50.2.sxt the specified module could not be found.  What can I do to get rid of this > I deleted all Kodak my programs and the registry of the computer files.

    Hello

    You can see which starts on startup with one of these

    You probably have a boot for Kodak remains entry

    How to use MSCONFIG in Windows Vista

    Here's how to use MSCONFIG in Windows Vista to disable some unnecessary programs that load automatically at startup. Disabling these programs will help your computer boot faster and crash less

    http://netsquirrel.com/Msconfig/msconfig_vista.html

    This utility, which has a knowledge of auto-starting locations of any startup monitor, shows you what programs configured to run at system startup or login and that the entries in the order of processing windows. These programs include those in your startup folder, Run, RunOnce, and other registry keys. You can configure Autoruns to show other locations, including Explorer shell, toolbar extensions, helper objects to the browser, Winlogon notifications, auto and many start-up services even more.

    http://TechNet.Microsoft.com/en-us/sysinternals/bb963902

  • After the clean boot get error loading awuspn.dll and load yabbyx.dll error. The specified module could not be found

    Hi Thahaseena,

    Thank you for helping! Finally I solve the problem of the error1324.but there were other questions come, after I did the clean boot and restart the computer then log, the window came several times put warn against the "Rundll":) 1 awuspn.dll 2) error loading yabbyx.dll loading error (both happened to uo WARNING several times). And boths display the message "the specified module could not be found. I tried to restore the computer to the State at the beginning, but it has no will to restore before the own boot.would you please help me to solve this problem again?

    Thank you

    Well, I want you to do is run MalwareBytes.  You say you already ran MalwareBytes after the clean boot, and then tried to reload regularly?

    Whatever program you have downloaded to fix the missing image file sounds like he came by malicious software.  What is the name of this program.

    --
    Gina Whipp
    Microsoft MVP (access)

    Please post all responses on the forum where everyone can enjoy.

  • RunDll error loading the specified Module could not be found (C:\Dan\AppData\Local\ngrfry.dll)

    Every time I restart my PC, I was above error... Then when I try and download the toolbar from Road runner, I get this (windows cannot access the specified device, path or file. You don't have permission from the appropriate permissions to access the item)

    C;\users\Dan\AppData\local\Temp\GLF391~1.exe

    Please, can someone help me with this... Thank you...

    Hello

    To remove the error message if still there after the controls above to malware.

    How to troubleshoot a problem by performing a clean boot in Windows Vista
    http://support.Microsoft.com/kb/929135
    How to check and change Vista startup programs
    http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

    Autoruns - free - see what programs are configured so that it starts automatically when
    your system boots and you connect. Autoruns also shows you the complete list of the registry
    and where applications can configure Auto-start for the files settings.
    http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx

    I hope this helps.

  • Error Intellegence Service of background transfer during startup: error 126: the specified module could not be found

    Hello: My Media Center Program Guide is not download all the investigation tracks more and others me BITS service does not and I get the above error when I try to reboot via Control Panel. I am at a total loss about what to do now. Help, please.

    Hello jessicanorthey,.

    Try the article following that resets components Windows Update, including BITS.

    Article number: 971058 - how to reset the Windows Update components?
    http://support.Microsoft.com/kb/971058

    Let us know if that helps.

    Marilyn

  • Rundll. The specified module could not be found. Download error.

    Hi, during downloading, I get the same error message: as the rundll module not found. What should I do to remedy this situation?

    Win Vista Ultimate-, 64-bit OS. SP2, IE9.

    [Moved from comments]

    Hi Norman,

    Thanks for posting your question in the Microsoft Community forums.

    I see from the description of the problem that you are unable to download and receive the message error "Rundll, the specified module could not be found".

    I imagine the inconvenience that you are experiencing. We are here to help and guide you in the right direction.

    To provide the proper resolution, that I would need more information on your side.

    1. is the specific issue when downloading any file or download from any particular Web site?

    2. did you of recent changes on the computer before this problem?

    This problem can occur because of a missing or corrupted Rundll32.exe file, conflict between software on the computer or due to infection by the virus.

    Method 1:
    Let's first virus scan run using the Microsoft Safety Scanner to make sure that the computer is virus-free.

    The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

    http://www.Microsoft.com/security/scanner/en-us/default.aspx

    Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

    Warning: If you run the antivirus program that is infected by the virus scan will get deleted. Therefore, reinstall the program. Also, if files and folders are affected by the virus, while they might even get deleted.

    Method 2:
    If the problem persists, we will start the computer Safe Mode to check if the problem occurs in Mode safe. If the problem does not occur in Mode safe mode, and then try to set the computer in clean boot state to find what startup item or service is causing the problem.

    Step 1:

    Start the computer in safe mode.

    Check out the link:

    Startup options (including safe mode)

    http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode

    Step 2:
    To run minimum, follow these steps.

    By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.

    How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
    http://support.Microsoft.com/kb/929135

    Note: After the boot minimum troubleshooting step, follow the "How to reset the computer to start as usual after a clean boot troubleshooting" section in the link provided to return the computer to a Normal startup mode.

    Let us know the status of the issue after you perform the troubleshooting steps. If you need help or information about the issue with the download, I'll be happy to help you. We, at tender Microsoft to excellence.

  • "iphbrbtf.dll the specified module could not be found" error starting

    When you open my computer laptop OS xp, got this message at the opening of service pack 3, I got this error RUNDLL XP loading C:\WINDOWS\system32\iphbrbtf.dll the specified module could not be found.  How can I remove this annoying message?

    It is sometimes easy to get rid of the error message by doing something like disable the startup item in msconfig (if you can still find), but I suggest you fix the problem and difficulty not only the symptom of the problem by simply deleting the startup message.
    I would also not recommend you start digging in the registry to try to find the startup item and remove it unless you have a backup of your system or at least a backup of your registry, because there is no 'Cancel' or 'quit without saving changes' option in regedit.  If you make a mistake, that's all.
    These ideas relieve 'rapid' and sometimes risky of the symptom if they not even work at all, but they can't actually solve the problem.  Also, I'd be suspicious of ideas that begin with the words "try."  You don't need to try things, you need to fix things.  You don't need to try ideas that might work, you must do something that will always work all the time.
    Here are the detailed instructions that protect you and solve your problem in the 'right' way.
    If you do not have a good explanation for the name of the file in a Google search, the chances are good that your system is currently or has been infected by malware.

    A "Cannot find...". ', ' Failed to start..., "Could not load..." ». "Might not work... "" Cannot run ""error loading... ". "or"specific module could not be found"message at startup is usually related to the malware that has been configured to run at startup, but the referenced file has been removed after a malware scan, leaving behind him a startup item or the registry entry pointing to a file that does not exist.
    It might be a removal of malicious software or an application not installed.  The entry may have a curious looking name since it was probably generated at random when the malware was installed. If you search your system for the referenced file, you may not find.
    Windows attempts to load this file but cannot locate because the file has been deleted for most probably during an analysis of the malware. However, an orphaned associate of remainders of startup parameter or registry entry and tells Windows to load the file when you start or connection.
    So you should delete the referenced entry Windows stop trying to load or run the file. It may or may not be included in the registry, but you can find it.  Autoruns (see below) you get the elements no matter where it is.

    You must be sure to solve the problem and not just fix the symptom of the problem by simply relieving your message - system is not a fix (there is a difference).

    If you just locate and uncheck the item in msconfig, which disables the element but does not remove the reference to the element of false starting your computer.   The msconfig program is not a Startup Manager, that's a troubleshooting tool.  Disabling things in msconfig to put an end to the messages and think that your problem is solved is short-sighted and leave behind him a sloppy XP configuration.  Just disable the display of a start-up error message should not count as a 'solution' to the problem.
    If you are comfortable editing the registry, you can find and remove the reference directly from there or remove it using a popular third-party tool called Autoruns.  The problem can always be found in the registry well.
    Before making any changes to your registry by hand or with third-party tools, don't forget to first make a backup of the registry
    . There is no cancellation or exit without saving the option in regedit.
    Here is a link to a popular registry backup tool:
    You can also use the Autoruns to find the element of start remains little matter where he's hiding.  Autoruns does not install anything on your computer.  It will display all startup locations where the reference may be then you can turn it off or remove it completely.  Here is the download link for Autoruns:
    Run Autoruns.exe and wait that he at the end of the filling of the list of entries.
    When the Autoruns is finished scanning your system, it will say "Ready" in the lower left corner.  Autoruns can be a little intimidating to first if you have never seen it before because it displays a lot of information.  You are really interested only a few sections.
    The problem is usually to start the system or the user startup entries, then click the connection tab and see if the startup item is there.
    Scroll through the list and look for a boot entry associated files in the error message.
    If you can't find on the connection tab, look in any tab.
    You can also click file, search to search for logon, or any tab for all or part of the name of the element.
    Right-click on the offending entry and choose Remove.  If you are not sure what it is, you can simply turn off (uncheck the entry), reboot, and if the problem is resolved and things work normally and everything works fine, then delete the offending entry.  If you don't see it in Autoruns, you may edit the registry and remove the item from your startup folder it.  Autoruns shall display the same information however.
    Given that your system has or has had an infection, follow up with this:
    Perform scans for malware, and then fix any problems:

    No matter what you use for malware protection, follow these steps:

    Download, install, update, and make at least an analysis full (not at the same time) with these free malware detection programs:
    SUPERAntiSpyware: (SAS): http://www.superantispyware.com/

    These comprehensive analyses can take some time, but you really need to run.  SAS will probably be just a bunch of Internet tracking cookies, but you can remove them.  Once you have done at least a full analysis, you can do quick scans in the future to save time and save the analyses complete for when you have more time or are really suspicious of an infection of the system.

    They can be uninstalled later if you wish.

    In 1985, there were 11 known computer viruses.  Today, there is more to 1, 122, 311 and the new threats are detected every day.  Always update your virus definitions before running a scan.

    Restart your computer and solve the outstanding issues.

  • As that I start my computer I get the error message "Rundll: error loading C:\windows\idoroyuyevev.dll the specified module could not be found." How should I do?

    Original title: Rundll error help

    As that I start my computer I get the error message "Rundll: error loading C:\windows\idoroyuyevev.dll the specified module could not be found." -What it means and how to fix it?

    It is sometimes easy to get rid of the error message by doing something like disable the startup item in msconfig (if you can still find), but I suggest you fix the problem and difficulty not only the symptom of the problem by simply deleting the startup message.
    I would also not recommend you start digging in the registry to try to find the startup item and remove it unless you have a backup of your system or at least a backup of your registry, because there is no 'Cancel' or 'quit without saving changes' option in regedit.  If you make a mistake, that's all.
    These ideas relieve 'rapid' and sometimes risky of the symptom if they not even work at all, but they can't actually solve the problem.  Also, I'd be suspicious of ideas that begin with the words "try."  You don't need to try things, you need to fix things.  You don't need to try ideas that might work, you must do something that will always work all the time.
    Here are the detailed instructions that protect you and solve your problem in the 'right' way.
    There is very little. DLL files that should be loaded from the C:\WINDOWS folder and is not one of them.  If you do not have a good explanation for the name of the file in a Google search, the chances are good that your system is currently or has been infected by malware.
    A "Cannot find...". ', ' Failed to start..., "Could not load..." ». "Might not work... "" Cannot run ""error loading... ". "or"specific module could not be found"message at startup is usually related to the malware that has been configured to run at startup, but the referenced file has been removed after a malware scan, leaving behind him a startup item or the registry entry pointing to a file that does not exist.
    It might be a removal of malicious software or an application not installed.  The entry may have a curious looking name since it was probably generated at random when the malware was installed. If you search your system for the referenced file, you may not find.
    Windows attempts to load this file but cannot locate because the file has been deleted for most probably during an analysis of the malware. However, an orphaned associate of remainders of startup parameter or registry entry and tells Windows to load the file when you start or connection.
    So you should delete the referenced entry Windows stop trying to load or run the file. It may or may not be included in the registry, but you can find it.  Autoruns (see below) you get the elements no matter where it is.

    You must be sure to solve the problem and not just fix the symptom of the problem by simply relieving your message - system is not a fix (there is a difference).

    If you just locate and uncheck the item in msconfig, which disables the element but does not remove the reference to the element of false starting your computer.   The msconfig program is not a Startup Manager, that's a troubleshooting tool.  Disabling things in msconfig to put an end to the messages and think that your problem is solved is short-sighted and leave behind him a sloppy XP configuration.  Just disable the display of a start-up error message should not count as a 'solution' to the problem.
    If you are comfortable editing the registry, you can find and remove the reference directly from there or remove it using a popular third-party tool called Autoruns.  The problem can always be found in the registry well.
    Before making any changes to your registry by hand or with third-party tools, don't forget to first make a backup of the registry
    . There is no cancellation or exit without saving the option in regedit.
    Here is a link to a popular registry backup tool:
    You can also use the Autoruns to find the element of start remains little matter where he's hiding.  Autoruns does not install anything on your computer.  It will display all startup locations where the reference may be then you can turn it off or remove it completely.  Here is the download link for Autoruns:
    Run Autoruns.exe and wait that he at the end of the filling of the list of entries.
    When the Autoruns is finished scanning your system, it will say "Ready" in the lower left corner.  Autoruns can be a little intimidating to first if you have never seen it before because it displays a lot of information.  You are really interested only a few sections.
    The problem is usually to start the system or the user startup entries, then click the connection tab and see if the startup item is there.
    Scroll through the list and look for a boot entry associated files in the error message.
    If you can't find on the connection tab, look in any tab.
    You can also click file, search to search for logon, or any tab for all or part of the name of the element.
    Right-click on the offending entry and choose Remove.  If you are not sure what it is, you can just turn it off, restart and if the problem is resolved and things are functioning normally and everything works fine, then remove the offending entry.  If you don't see it in Autoruns, you may edit the registry and remove the item from your startup folder it.  Autoruns shall display the same information however.
    Given that your system has or has had an infection, follow up with this:
    Perform scans for malware, and then fix any problems:
    Download, install, update and do a full scan with these free malware detection programs at:
    Malwarebytes (MMFA): http://malwarebytes.org/
    SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
    They can be uninstalled later if you wish.
    Restart your computer and solve the outstanding issues.

  • What is this error? Error loading c:windows\mcycol40.dll the specified module could not be found

    Windows XP is giving the following error message and there is NOTHING to be found anywhere on this subject.  Help

    RUNDLL

    Error loading c:windows\mcycol40.dll

    the specified module could not be found.

    It is sometimes easy to get rid of the error message by doing something like disable the startup item in msconfig (if you can still find), but I suggest you fix the problem and difficulty not only the symptom of the problem by simply deleting the startup message.
    I would also not recommend you start digging in the registry to try to find the startup item and remove it unless you have a backup of your system or at least a backup of your registry, because there is no 'Cancel' or 'quit without saving changes' option in regedit.  If you make a mistake, that's all.
    These ideas relieve 'rapid' and sometimes risky of the symptom if they not even work at all, but they can't actually solve the problem.  Also, I'd be suspicious of ideas that begin with the words "try."  You don't need to try things, you need to fix things.  You don't need to try ideas that might work, you must do something that will always work all the time.
    Here are the detailed instructions that protect you and solve your problem in the 'right' way.
    There is very little. DLL files that should be loaded from the C:\WINDOWS folder and is not one of them.  If you can't find a good explanation for the name of the file in a Google search, re chances while your system is currently or has been infected with malicious software.
    A "Cannot find...". ', ' Failed to start..., "Could not load..." ». "Might not work... "" Cannot run ""error loading... ". "or"specific module could not be found"message at startup is usually related to the malware that has been configured to run at startup, but the referenced file has been removed after a malware scan, leaving behind him a startup item or the registry entry pointing to a file that does not exist.
    It might be a removal of malicious software or an application not installed.  The entry may have a curious looking name since it was probably generated at random when the malware was installed. If you search your system for the referenced file, you may not find.
    Windows attempts to load this file but cannot locate because the file has been deleted for most probably during an analysis of the malware. However, an orphaned associate of remainders of startup parameter or registry entry and tells Windows to load the file when you start or connection.
    So you should delete the referenced entry Windows stop trying to load or run the file. It may or may not be included in the registry, but you can find it.  Autoruns (see below) you get the elements no matter where it is.

    You must be sure to solve the problem and not just fix the symptom of the problem by simply relieving your message - system is not a fix (there is a difference).

    If you just locate and uncheck the item in msconfig, which disables the element but does not remove the reference to the element of false starting your computer.   The msconfig program is not a Startup Manager, that's a troubleshooting tool.  Disabling things in msconfig to put an end to the messages and think that your problem is solved is short-sighted and leave behind him a sloppy XP configuration.  Just disable the display of a start-up error message should not count as a 'solution' to the problem.
    If you are comfortable editing the registry, you can find and remove the reference directly from there or remove it using a popular third-party tool called Autoruns.  The problem can always be found in the registry well.
    Before making any changes to your registry by hand or with third-party tools, don't forget to first make a backup of the registry
    . There is no cancellation or exit without saving the option in regedit.
    Here is a link to a popular registry backup tool:
    You can also use the Autoruns to find the element of start remains little matter where he's hiding.  Autoruns does not install anything on your computer.  It will display all startup locations where the reference may be then you can turn it off or remove it completely.  Here is the download link for Autoruns:
    Run Autoruns.exe and wait that he at the end of the filling of the list of entries.
    When the Autoruns is finished scanning your system, it will say "Ready" in the lower left corner.  Autoruns can be a little intimidating to first if you have never seen it before because it displays a lot of information.  You are really interested only a few sections.
    The problem is usually to start the system or the user startup entries, then click the connection tab and see if the startup item is there.
    Scroll through the list and look for a boot entry associated files in the error message.
    If you can't find on the connection tab, look in any tab.
    You can also click file, search to search for logon, or any tab for all or part of the name of the element.
    Right-click on the offending entry and choose Remove.  If you are not sure what it is, you can simply disable, restart and if the problem is resolved and then remove the offending entry.  If you don't see it in Autoruns, you may edit the registry and remove the item from your startup folder it.  Autoruns shall display the same information however.
    Given that you had or have an infection, followed with this:
    Perform scans for malware, and then fix any problems:
    Download, install, update and do a full scan with these free malware detection programs:
    Malwarebytes (MMFA): http://malwarebytes.org/
    SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
    They can be uninstalled later if you wish.
    Restart your computer and solve the outstanding issues.

  • MSG for error in Windows 7: "unable to load DLL 'Gpib - 32.dll': the specified module could not be found."

    Hi people, I have a project in VB. NET (VS2010 specifically), which has been updated from an old VB6 project. The old project

    use Niglobal.bas and Vbib - 32.bas to communicate with the GPIB plugged into one of our litters.
    Now in the 64-bit Win7 with the Niglobal.bas and the Vbib - 32.bas converted to Niglobal.vb and Vbib - 32.vb,.

    I get an error when debugging to

    Public void RegisterGPIBGlobals()

    in the Vbib - 32.vb, the error msg says:

    Unable to load DLL 'Gpib - 32.dll': the specified module could not be found. (Exception from HRESULT: 0x8007007E)

    It seems like this Gpib - 32.dll, that I found under SysWOW64 on my Win7 is not designed for a 64-bit application and when I copy this dll file on

    C:\Windows\System32, the msg of error becomes:

    An attempt was made to load a program with an incorrect format. (Exception from HRESULT: 0x8007000B)

    So I think my question is double: 1. the drafting of my own app in VB. NET can I still use Gpib - 32.dll (including the Niglobal.vb and Vbib - 32.vb)?

    2 Will the application I am writing with .NET work in x 64 Windows 7?

    The Almighty gurus and Mods please help. Thank you!

    Hi Joel, thanks for the answer! I have the 3.0.2 driver.

    I was looking around for a while after I posted here and further in the use of NI4882 manual, page 4-4, I found this:

    «To bring an application in an environment 64-bit requires the application to migrate the NI4882 API and be recompiled.»

    So I'm ditching the gpib - 32.dll (vbib - 32 & niglobal) and currently I am using NI4882.dll and restructuring of my project.

  • Receive automatic updates for Windows XP "error 127: the specified procedure could not be found." Also "error 0 x 80240036: could not start the service automatic updates on local computer»

    Update CPU which proved later to be bad.  Replaced by original CPU.  Re-installed Windows XP Home using a slipstreamed CD that I burned the original non - OEM drive that has Service Pack 2.  Integrated Service Pack 3 which I got from the MS. site  Everything works well except for Windows Update.  The setting seem to be correct in Administrative Tools/Services.  The status of the Service is "stopped".  When I try to start the automatic updates from Administrative Tools/Services I receive "error 127: the specified procedure could not be found."  Also "error 0 x 80240036: could not start the service automatic updates on local computer»  Used the range of anti-virus and malware and found nothing.  Currently using Avast 7.0.1426.  I also used various tools of Fix - It MS nothing helps.  Any help would be greatly appreciated.  Thank you.

    Hello

    1. what application or antivirus security suite is installed and your current subscription?

    2 Norton (another) or a McAfee application ever installed on this machine?

    3. What are the fix applications that you used so far to try to fix this problem?

    Try the next method and check if that helps you with the question of the 127 error you receive.

    Method 1: Rdding the DLL file by doing the following:

    1. Click Start and click Run, in the search box type CMD and press to enter.
    2. right click on CMD in the list and click "Run as Administrator".
    3. type the following command and press ENTER. Regsvr32 msvcp71.dll
    4. close the command prompt window.

    Method 2: run the file system (CFS) Checker:

    (Note: you need an XP installation disk to start the System File Checker search.)

    The SFC command is used to detect and resolve problems with the files on Windows XP and Windows Vista computers. This command allows you to launch the Windows File Protection Service and allows you to analyze all integrity-protected Windows files and replace all problematic files identified.

    1. click on start, and in the box to start, search type CMD
    2. right click on CMD in the list and click "Run as Administrator"
    3. type the following command and press ENTER. Sfc/scannow
    4. close the command prompt window.

    For more information on scan SFC (System File Checker), please look in the link mentioned below.

    http://support.Microsoft.com/kb/310747

    I hope this helps.

  • Start Windows XP problem, error: C:Windows\ecsdlp.dll the specified module could not be found.

    original title:. Error loading windows

    Under XP. Error loading of windows C:Windows\ecsdlp.dll the specified module could not be found. Ditto for C:\Windows\udehukoziye.dll. Ideas?

    Under XP. Error loading of windows C:Windows\ecsdlp.dll the specified module could not be found. Ditto for C:\Windows\udehukoziye.dll. Ideas?

    Your computer was (and still may be) infected with the malware.  Error messages such as those that you have the result when your anti-malware application deletes the active part of the malicious program but fails to remove the entry from the Windows registry used to start the malicious software.

    First of all, download, install, update and scan with these two free utilities:
    MalwareBytes Anti-Malware
    SUPERAntiSpyware

    If after the scans have completed and you have removed a malware that has been found, you get the error messages on a restart, download, install and run Autoruns.  Once the scan is complete Autoruns (bottom left), click the 'Connection' tab and find the names of two files in your error messages (ecsdlp.dll and udehukoziye.dll).  If found, uncheck the box at the left end of the line (you can delete the entry, but this action is not reversible).  If you can't find the name of the file in the connection tab, click the "all" tab, use file > search to find them.

    Once the entries with incorrect file names have been deleted or not, you will get errors at startup upward.

Maybe you are looking for