network location records gone dead! FTP probs...

Similar Questions

• With the help of the network location and mapped a drive to the server FTP. during the transfer of very large amounts of the login information is always lost.

  With the help of the network location and mapped a drive to the server FTP off site; during the transfer of very large amounts of the login information is always lost.  Computer power settings are configured to not to do no matter what, I'm assuming that the ftp server can publish a scenerio timeout but is there a way for my computer and windows to restart the file transfer?

  Hello

  Thanks for posting your question in the Microsoft Community forums.

  I see from the description of the problem, you have a problem with networking on the FTP server.

  The question you posted would be better suited in the Technet Forums. I would post the query in the link below.

  http://social.technet.Microsoft.com/forums/en/w7itpronetworking/threads

  Hope this information helps you. If you need additional help or information on Windows, I'll be happy to help you. We, at tender Microsoft to excellence.

• Cannot create the network location in my computer

  I can't create a network location in my computer. I open my computer and right click on an open area and enter the ftp://ftp.irvinerunningclub.co.uk location but get the error message "the folder you entered does not appear to be valid" I have another computer with the same version of windows 7 (home premium) that allows me to create this place without problem. Are there opportunities for a fix or a link to an update that corrects this problem?

  Hi Finlay,

  I understand that when you try to create a network location, you get an error.

  The error message you get usually occurs when Windows try to check the subfolders of the parent and parent. If the parent folder is not configured for WebDAV, the connection attempt fails.

  Please see the article below for more information:

  http://support.Microsoft.com/en-us/KB/2560598

  We can also refer to the link below and check if the steps you followed to create location are correct.

  Refer to the answer provided by Anoop P K replied the July 10, 2012.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/FTP-server-error-the-folder-you-entered-does-not/2d919979-Badd-4134-909e-645028fe56b8

  I hope this helps. Please let us know if you have any additional questions.

• could not access network location problems in the installation of nba 2 k 12

  pls help! i manually uninstalled my nba 2 k 12 manually deleting the folder tne itself... I want to install it again... problem now it is always say "could not access network location"... pls guys I need of your help... I'm using windows 7, 64-bit... tnx

  Hi Raymetalgear,

  It seems that the game is not uninstalled properly. I suggest to delete the game Application Data folder NBA2012 folder and try to reinstall.

  2012 NBA record will be stored in the following location:

  %USERPROFILE%\Local Settings\Application Data\ NBA 2012

  Let us know if that helps.

• Network locations suddenly stopped working

  Hey guys - I'm under Windows 7 Home Premium, and earlier today, I noticed the network location that I had set up on my Web server had stop working, and when I try to set up another network ftp location, I get an error of invalid folder. Anyone know what is happening?

  Hi Ron,

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the Forum TechNet site:

  http://social.technet.Microsoft.com/forums/en/category/w7itpro/

• Possible to have delivery obiee 11.1.1.5 agent network location?

  Possible to have delivery obiee 11.1.1.5 agent network location?
  
  I have seen a lot of posts on the appeal of a script java during the agent to deliver process where you can have the agent back to a file location (windows) However, I can't find clear answers on knowledge if you can have the agent deliver the content to a network location. Is this possible? Someone at - it an example script?
  
  Thank you very much.

  Hey Joe,

  Yes, it is possible and we have implemented something similar in g couple 10 years ago based post of this thread Madan: ( Configure the FTP in OBIEE delivers. )

  Thank you
  -Laurence.

• Is it possible to delete some network locations not in use? Thank you

  Is it possible to delete some network locations not in use? Thank you

  Are you talking about system preferences-> network-> location-> Edit-> [-]

  

  or are you talking about the system preferences-> network-> advanced-> preferred networks-> [-]

  

• I have IE8 Favorites saved off as bookmark.htm in another network location. How can I get in firefox?

  I have IE8 Favorites saved off as bookmark.htm in another network location. How can I get in firefox?

  Bookmarks > organize bookmarks-> import and backup - import HTML... = HTML file

• Windows Server 2012R2 - network location awareness continues to change the public domain after rebooting

  I also have this problem but I have domain controllers that are NOT part of this Hyper-V host.  If I restart the network location awareness (which also restarts the network list Service) it goes back to the field as it should.  Now when I reboot this server it will be once more put the interface / network to the public even if this Hyper-V server has been successfully joined to the domain with a static IP address.

  Now for clarification.  This Hyper-V server is NOT yet configured virtual.  The only thing that has been set up is a NIC team with two cards on Board (LAN 3 & 4 ports) and two additional network cards four port card (ports 3 & 4).  Local network connection is dedicated to LAN Port No. 1.  We also have a dedicated of the IMM port for access to the Strip.

  The ONLY time I can get this server to restart and STAY in the 'Domain' location is now if I have the PORTFAST enabled on the switch port to which it is connected.  Yes, we use STP here in our company.  This is not the first time that I had to do this, but it seems not just as a colleague claims that he didn't need to do and its technology Hyper-V server restarts fine.  I him have had check it out and he sees no difference between its servers and mine.  Still mine restarts always in the "public" unless I have active portfast.  Any thoughts?

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• the network location cannot be reached

  Trying to access a shared file on the windows Server 2008 from my PC, I got an error (the network location is not reachable...). But however when I try to access a file share on this server windows 2008 to my PC or the other PC, I have no problem... and it works... can someone help me!
  Respect of
  Islah

  Thank you

  Hello

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums:

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

• Error 1606: Could not access network location % APPDATA%\.

  I am trying to install a game for Windows: Zoo Tycoon 2 Ultimate Collection (which is Zoo Tycoon 2 + 4 expansion packs), on a Vista Home SP2 machine.  When you install disc 1, I almost immediately get the error above,Error 1606: could not access network location % APPDATA%\. I looked at the error on this forum, who led me to the installation page for the installation package located manual download page offline at the: http://www.java.com/en/download/help/error_installshield.xml. When I tried to install the offline installation package, I got the same error, 1606.  I don't know what to do next?  This game comes without a product key, this support won't even take my call.  Thank you-

  This problem occurs because there is incorrect entries in the Shell folder of the user who is logged on to Microsoft Windows. When Windows Installer goes to the sale of Shell folder of the user who is logged on to the computer, Windows Installer cannot locate the correct entry. The solution is inhttp://support.microsoft.com/default.aspx/kb/886549.

  The steps to correct this problem involve editing the Windows registry.  Change the settings of the REGISTRY can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the REGISTRY settings configuration can be solved. Changes to these settings are at your own risk. I suggest that you first back up your registry as follows: http://windows.microsoft.com/en-US/windows-vista/Back-up-the-registry.

  Here are the steps to fix it.

  1. click on start, run, typeregedit in the Open box, and then click OK.

  2. look for the following registry key:

  HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell dossiers\

  3 remove the entries that show the path that is listed in the error message.

  886549 KBhttp://support.microsoft.com/default.aspx/kb/886549: Regedit open again. In the left pane, click User Shell Folders, point tonew, click expandable string value, type the value name that you want to restore (AppData) and then press ENTER. Right click on this value, clickchange, type the value in the value data for the value name box, and then clickOK. The value data must be: % USERPROFILE%\AppData\Roaming.

  Step 8 KB 886549 suggests that you also check the values in HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders. However, by fixing my problem, I had not to change values in the registry key. If this does not work, follow ALL the steps in the referenced article.

  Good luck. Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Error 1606.Could access network location:

  Hello! I am an employee of the hospital. Currently, I am trying to install a provider software on a machine that I have admin rights and get a "Error 1606.Could access network location:.." I've read about this error in the installation/uninstallation of microsoft product, could this work to outside vendor and software?

  Is there something in the installation that needs to access something on your network? The best would be to contact the software vendor and ask them. I don't think that this would be linked to a windows problem.

  I hope this helps.

• "Could access the network location:.."

  I get the "could access the network location:. «error with installing and uninstalling of programs, i.e. iTunes, Quicktime.»»
  I checked the Internet and found registry patches, but they have not worked for me. I tried the Fix It program in one of the solutions, not good.  I also stop my firewall and anti-virus and tried to install it that way. no go.

  I have Windows XP, SP3

  any suggestions?

  I thought about it... have an external hard drive which I usually turned off when the use not. I tried to install everything with it on and it worked.
  Thanks for your help

• Tried to install iTunes 10... error message... couldn't access network location \common files\.

  Hi, I have really not much about computers, I'm sorry. I tried looking for answers myself but I do not understand much of the language and I don't know if I read the appropriate information.

  I wanted to update my iTunes on my computer (Windows XP) but it doesn't seem to work when I searched for upgrades and click Yes, I want to update. Nothing happened.

  So I uninstalled my iTunes and I tried to install iTunes 10. But when I did, I got an error message with the title of iTunes + QuickTime... say... couldn't access network location \common files\.

  I uninstalled QuickTime, hoping that would help, but of course not knowing what I was doing. It did not help.

  What I Googled, it seemed I had to look at something in the term. I arrived at the spot but have not seen any obvious errors. But then again, I had really no idea what I was looking at!

  I would really appreciate if someone could help me with a language very very basic.

  Thank you very much.
  -Emma.

  It is a Forum Vista, not XP one, maybe you should try this Forum because there will be more applicable to your operating system.
  http://social.technet.Microsoft.com/forums/en-us/itproxpsp/threads

  See if these items are easy to follow?

  Remove and reinstall iTunes, QuickTime, and other software components for Windows Vista or Windows 7 (also for the links of XP).
  http://support.Apple.com/kb/HT1923

  Internal error: failed to get the path of the file directory common 64-bit
  http://social.answers.Microsoft.com/forums/en-us/w7programs/thread/dc02d25a-E26d-4F74-a8d0-73858b5a0d07

  If you read the link above here is a relevant .jpg of XP
  http://CID-db58e4a03b3dccab.Office.live.com/self.aspx/public/current%20XP.jpg

  Have you tried the Itunes forum to see if there are similar stories there?
  iTunes for Windows
  http://discussions.Apple.com/category.jspa?categoryID=150

• Network discovery, file sharing settings keep changing by itself and Alltel to set the network location continues to ask the wireless device

  former title: network location settings. Discovery of NW. File sharing. public folder sharing. AVG 9.0 'tools' and network connections.

  My Alltel Wireless device again set the network location. And continues to change my network settings for the discovery of NW to:, as well as file sharing for: file public and sharing: read-only.  I have AVG Security 9.0 and under 'tools' and connections network shows several svchost with States reading service connections listening and unknown. I don't want no access to my computer and cannot find any computer consultants who can get this to stop. What can I do?

  Hello
   
  1. the options apply automatically on?
  2. have you made changes on the computer recently?
  3. have you installed any Alltel Wireless application to manage network connections?
  4. What is the current network location type on? Is it home, work or public?
  Network discovery and file sharing settings depend on the network location. For examle, if you set the network as a public location it turn on file sharing.  So I would ask you to turn all the parameters and then choose the type of network and check if the parameters change again.
  
  Method 1.
  I recommend you to check if the problem exists in clean boot. May be a third party application is causing these changes.
  See the article below for instructions on how to start your computer in a clean boot state.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: When the diagnosis is complete, don't forget to reset your computer to normal startup. Follow step 7 in the above article.
   
  Method 2.
  Also check the settings under tools in AVG security suite. You may need to check with the help of AVG on it.
  Or you can disable the antivirus software and check if that causes this behavior.
  Temporarily disable the security software installed on the computer and check if the problem persists.
  Disable the anti-virus software
  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software
  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
  
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.