Network Magic cannot discover a "BEFSR41" router behind a "WET610N" wireless bridge

Similar Questions

• Satellite Pro L100: Wireless network card cannot find the Wlan router

  Hello

  I just bought a Toshiba Satellite pro L100, which has a built in wireless card, an Atheros AR5005g. I activated the card wireless via the switch on the laptop, and then I let the search for available networks. She is 4-5 or secured creditor and unsecured networks in my area, but it does not find my router which is about 3 meters from the hotel!

  I tried to manually configure my network to see if the laptop can locate it, but without success. I've used a network card in my last laptop, a Belkin 802.11 g that I then inserted in the excellent connection laptop and bingo to 54mps. But I want to use the integrated wireless card that captures an unsecured somewhere network in my area but the signal is weak and is very slow.

  Can someone help me please? The router that I'm trying to access is a Netger WGR 614. NETGEAR were not useful.
  Rgds,

  Richard.

  Hello

  First of all I want to say that for these questions there is not a magic solution.
  I think that you need to check many options that could have a negative influence on the WLan connectivity.
  First of all, you should check if the Wlan router supports WLan standard even as the Wlan card. For example 802.11 B or G or both

  Disable all ciphers on the router as well as the MAC address filtering.
  Then check the WiFi channels! Try to use the same channel on the map of local area network on the router.

  Which driver do you use? Try to download the latest WLan driver Atheros site.
  I think the Atheros provides the own local network configuration utility. Try to use it.

  As you can see, there are many options that must be verified

  Additional information:
  Also, one of my notebooks is not able to connect to the router because I use a WLan router that supports a 802.11 BG WLan standard and in my book the AB 802.11 card has been installed.
  So I can't connect to the router ;(

• There is the Red Cross in the icon network and cannot connect to the internet, to detect any wireless network.

  * Original title: Internet connection problem

  It has red cross standing in the network icon and I can't connect to internet via USB modem or WiFi. It is also not detect any wireless network.

  Aalishan salvation,

  -Have there been recent changes made on the computer before the show?

  This problem can result from network card or driver settings.

  I will only refer to the suggestions provided by Gokul T on May 14, 2010 and check if it helps.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/Windows-7-is-unable-to-detect-any-wireless/9a7386ba-7775-4039-940b-20fa537c6084

  Warning: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  For more information, see the links.

  Why can't I find a wireless network?

  Wireless and wired network problems

  Keep us informed on the status of the issue.

• Network Magic and Cisco router EA4500 UID and password

  I use the 5.5.9150.0 version of the free product. I had my last router, with a WRT400N. Since then, I have installed an EA4500 router to replace the WRT400N. I'm glad that Network Magic works with my new router, but I have a problem: I can't connect to my router via Netowrk Magic.

  Protection status/Wireless / Wireless Protection settings brings up a window that asks you the router user name and the password. I went to the page "Setting Up: Basics" guide of the user EA4500 (page 13) and tried all the values that I had copied in when I installed the router.

  I tried the SSID of the router and the "Linksys Smart Wi - Fi Username ' in the user ID box.

  I tried the "Linksys Smart WIFI password", the network, the Guest network password password and the router password (same as the network password).

  Nothing has worked. I've only connected to the EA4500 using the Linksys Smart WiFi, username and password, so I'm stuck trying to figure what values to use.

  Please help me understand what I am doing wrong. Thank you!

  I stumbled in the response:

  1. start Network Magic and display the network map.

  2. click on the name of the router (just under the router icon).

  3. click on Set Up or manage the device.

  4. the Linksys WiFi Smart Sign In (to the router) window appears.

  5 connect to the router by using the credentials of Smart Wi - Fi that you set up when you have installed the router.

  Now, all router commands will work from within Network Magic.

  :+)

• E3000 as a waterfall on a wireless bridge router

  Can you offer any suggestions on how to implement the next network. I would like to make it's good and I'm ready to buy the right equipment.

  Here is a diagram of the structure:

  

  After my research, I realized that normally router B to there should in fact be only a switch, which the IP assigned by DHCP router A to all customers in both networks A and B. However, one of my goals is to ensure that the network B will remain operational, even if the wireless bridge loses its connection to A router and Wan. It seems to me that the best way to proceed is to use a router instead of a switch to Y. It is not necessary that B Network Clients see Clients in the network has only access to the WAN is required.  In addition, network B Clients must communicate to 1 GB (there is a NAS box) and I do not want their throutput to be constrained by the speed of wireless bridge.

  Can I use an E3000 router B to Y, and if so how should be configured. I understand that I must give another IP address that the router has to X. The challenge for me is to know how to configure the network B so that it is independent from the router except for internet access. I have to configure each network on a different subnet?

  In addition, the wireless bridge link must be distinct from wireless networks and B. Is it possible by simply assigning their own SSID wireless bridges and routers wireless in A and B different SSID?

  Thank you

  Andrew

  Thanks for all the help!

• Xbox 360 cannot connect to WRT54G2 router network.

  I just bought a new router WRT54G2 specifically use for xbox live. I put my fine computer, using an ethernet cable from the router to the computer. And I used the installation disk to create a network name and password. But when I use the wireless adapter to connect to my network, it does not. And even when I manually type the name and the WPA code, he says that it can't find the network. The settings I enabled SSID broadcast. So I don't know what to do from here. Any ideas?

  Who is your ISP?

  Try the following settings on the router...

  -Change the channel to 11-2 wireless, 462

  -The tab Advance Wireless... Change the interval of tag to 75, the Fragmentation threshold to 2304, the RTS threshold to 2304

  Now let's see if you can locate your wireless network and try to connect...

• Cannot delete the desktop icon: Network Magic?

  Running Windows 7 64-bit HP.  Network Magic is installed as a 30 day trial when I've upgraded from Vista to Windows 7 (why I've never waited so long?). I uninstalled by getting in pure Networks/Setup...etc; It's, I think I've done the proper uninstall. However, I can't get rid of his Network Magic Folders icon on my desktop. I can't even move the icon on the desktop. Right click gives: open and create a shortcut.  Selecting open doesn't do nothing, shortened by selecting creates a shortcut on the desktop that can be deleted. Suggestions?

  EDIT: Here's an answer essentially the same question (http://social.answers.microsoft.com/Forums/en-US/w7desktop/thread/3a90c945-1072-4bb7-9afc-ec8df2cee03b).  However, I'm not good in the registry to work, I can't go wrong with it as I don't know if the answer is there.

  That did the trick:

  Delete this key...

  [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\Desktop\NameSpace\ {C55C499D-3518-44a1-998E-796AC5FC989D}]
  @= "NetworkMagic.

• Can not activate my Network Magic software after reinstalling

  After a clean install of Windows 8 Pro I installed my Network Magic Software. After installation, I tried to activate my legal version, but it will not accept a connection to save and activate. I discovered that Cisco supports more Net Magic then activation is not possible in the Netherlands. Cisco said that there is no other tool network of Cisco for my WRT-320N replacement and other Cisco devices. Is it possible to activate my Network Magic software in another way (in the United States or in the registry of Windows or Network Magic)? THX Martin

  One of the reasons why software cannot be installed are because of the firewall on your computer or antivirus software. Try to disable the firewall or disable your anti-virus temporarily and activate Network Magic again.

• Network Magic with a Linksys WAG54G2

  I am trying to disable the network lock so I can uninstall Network Magic 5.5.9118.2 - Pure0. I can't do though, as he says that it cannot configure Network Lock on my router.

  My modem/router is a Linksys WAG54G2 (1.00.16 firmware version). I heard that it does not fully support Network Magic but I was able to turn on the last night the program of locking and security wireless network. What can I do now?

  Correction of the problem. Stop and restart the service of the platform solves the problem.

• Magic of the network hit all the computers off line when the laptop wireless on signs

  I have Network Magic V. 5.1.9055.0, a G from Linksys WRT110 wireless router. Online at any time may be all or part of the next list computers/gamers, computer hand Win XP sp3 is connected to the router, Samsung clp300 printer lazer connected to the main computer as a server, Vista sp2 office connected to the Wii, PS3 wireless wireless router and laptop Vista sp2 wireless. Whenever the laptop wireless comes online, it will stop magic network until the wireless is fully initialized and online, it strikes all onlines offline until there is a full boot of the wireless.

  Very frustrating since we went all the cisco and spilled a belkin router that worked perfectly with the above configuration. (unfortunately I gave the belkin far and no longer have access to it or I would have released this new linksys and would be happy to once again) I don't understand why cisco units cannot work together in harmony?  In any case, I can't find any info on the help of linksys or the magical sites network which brings me to this forum. Need help, please notify...

  I removed NM v5.1.9055 three computers and re-installed to v 5.5.9118. inserted my key and re started to each of them. When the laptop wireless started it off the other two for about 3 minutes until the phone was fully charged while we were back on the line. The poster always online in the map view, the internet router is and the laptop (Vista) shows online, but the report to other computers (1 XP and 1 Vista) shows red and offline. Always frustrating because it's all working without error until I installed the linksys cisco router then the trouble started... still need help...

• Network Magic is not updated in the computer security software.

  I decided to standardize my security with Microsoft Security Essentials software.  I uninstalled the previous security software (CA Internet Security Suite) and installed Security Essentials on two laptops.  Now, when I look at the Map Network Magic, I have 3 alerts.

  My router is D - Link DI - 624 Rev C Firmware 2.70.  Network magic is c. 5.5.9195.0 - PURE0, version of the 11.2.9195.1 platform.  My cable modem is D - link DCM-202.

  When I discover the details and alerts from a computer, running Vista Home, SP2, it shows that there is no antivirus installed, the spy software is the defender of widows, and firewall Microsoft Windows is installed.  Alerts that I receive from this computer are that the Antispyware is turned off and the Antivirus is not installed.

  When I discovered the details and alerts of yhe other computer, running XP, SP3, it shows that the Antivirus is CA-Anti-Virus, installed no Antispyware and firewall Microsoft Windows is installed.  The alert for this computer, it is that there is no antispyware installed.

  I removed the two computers to my network card, rebooted and re them connected to Network Magic, but the sill of alerts are displayed.

  How can I get Network Magic to report the correct security software installed on both of these computers?

  Hi, MSE was released after 5.5 NM.  Wait for the next update for full support.

• Problem detection network with Network Magic/Pure platform Service quirks and WUSB54GC

  SYSTEM & HARDWARE INFO:
   
  Wireless adapter: USB54GC v3
  Router: Netgear WNR834B (with latest firmware)
  Router config: Auto Channel, up to 130mbps mode, radio enabled, enabled SSID broadcast
  Router Config2: Frag Ahmed - 2346, beat the CTS/RTS - 234, long preamble, MTU - 1500
  Wireless security: WPA - PSK + WPA2 - PSK
  Internet: ISP Modem, Auto-IP, DNS Auto, no connection cable

  Operating system: Windows XP Pro SP3 (latest updates as of 17/01/2010)
  Drivers: Latest from Linksys site (v4.9.90 setup.exe download)
  Programs of security software: Comodo & Panda Cloud Antivirus Firewall
  Configs of security software: uninstalled, installed or disabled, and installed/enabled

  DETAILS OF THE PROBLEMS:

  No wireless network is detected on the computer with the installed adapter WUSB54GC.  Cell phones, printer (located in the same office) and game console, receive positive signals / have no connectivity problem.  With a new installation of Windows (i.e. the BONES cost installation before using each method) I tried to install the unit using the following methods: 1) using the Setup program on the CD-ROM included, 2) using the last program (drivers) site Web of Linksys, install 3) manually through the device with drivers from the Disk Manager and installing 4) manually through the Device Manager with the newer drivers from the Web site Linksys.  In addition, I tried with the firewall disabled/uninstalled software.

  I had some success using the Linksys Wireless Manager program that is included in the installation program.  However, it is only if I choose the option 'connect to the hidden network' when the Wireless Manager is ran in the last step of the Installer (no network is detected the case).  The quirks are that the network is not hidden, and after Setup is complete, I can see all the wireless LANs with the Linksys Wireless Manager (no need to check the option hidden network).  After a few diagnostic tests, I think that the Network Magic software that is installed in quiet mode with the Linksys software is at the origin of the problem.

  During the detailed above method that allowed me to connect to the network, I used the firewall software to observe that connectivity can be established only if nmsrvc.exe, a component of the network Network Magic/pure software platform that is installed silently, is allowed access to the network.  After this program to access the Linksys Wireless Manager network can detect networks normally and connectivity problems disappeared.  After he logged initially I can even kill the process, its assistance process and the program manager wireless, still maintain connectivity.  I also thought about this magic (AKA pure networks platform service) network installation two other network protocols that when disabled preventing connectivity.  With certainty the adapter only works if I finish the complete installation program by using the hidden network option and continue to use linksys wireless/network magic software later.

  I'm trying to understand why the Network Magic software is necessary to detect and use all networks.  As I said originally, I tried just to install the drivers through the device without success Manager.  The adapter is configured on a machine Pentium 4 of 2001, and this software supports 40 MB of precious CPU cycles and memory.  I want to connect to my wireless network and use the computer without software bloated slow down the computer even more.  My own conclusion, after all these tests are that my router needs the network magic to work properly for some reason, but if that's true, I would at least use Windows connects to the network as Linksys Wireless Manager uses 30MB RAM itself.  Of course, it's more a problem advanced if I appreciate anyone who takes the time to read all this and make their contribution.  Thank you.

  I think that the most appropriate statement would be that the WUSB54GC has some compatibility issues with Windows XP SP3.

  Specifying the age of the available Linksys drivers I did some research and discovered that the WUSB54GCv3 uses a third party (a common practice), the Ralink RT2800UD chipset.  Latest Ralink drivers for this chipset are over a year newer than the official drivers from Linksys.  They require just a few reconfiguration so that they work with Linksys WUSB54GCv3.  With the updated drivers comes better compatibility and performance often.

  Once I installed these drivers updated the device could detect local wireless normally, and I was able to use the Zero Windows wireless utility to connect to my network.  I think that others with similar compatibility problems will have the same result.  For more information and links to these pilots updated already visit reconfigured: http://sites.google.com/site/linksysupdateddrivers/.  There are not official, updated drivers for many other Linksys products here.  Credit for the drivers and the Web site goes to this person: http://sites.google.com/site/linksysupdateddrivers/about.

• Network drive cannot be selected in Time Machine, but works in the Finder

  Hello

  I have a NetGear wndr4500v2 router in which I now have my 1 TB HD plugged (HFS formatted). I've always used this drive for backups TM via the USB in my MBP, but decided it would be good to have all it wireless. Unfortunately I was not able to select the player in Time Machine.

  -I cannot connect / to connect/change player/server and all of its files in the Finder, no problem

  -Already played a bit with SMB and AFP sharing settings

  -Tried with router via an ethernet cable connection

  -NetGear Vaucluse to Time Machine support

  -Of course restarted devices

  -I run El Capitan on a 13 "MacBook Pro 2012

  All this with no result. I have not yet tried to do the old-fashioned way (https://www.youtube.com/watch?v=_VwHGSHSnDk) as I was hoping for an easy solution and beside that, I'm not sure that this guide still works on OSX 11 all thoughts about it, guys? Let me know!

  A device third-party network attached storage (NAS) or a router is unsuitable for use with Time Machine, especially if it's your only backup. I know that's not what you want to hear. I know that the manufacturer declares that the unit will work with Time Machine.

  Apple has published a specification for network devices that works with Time Machine. No third party provider, AFAIK, does meet this specification. They all use the application of Netatalk incomplete, obsolete Apple Filing Protocol.

  Apple does not endorse any device third-party network for use with Time Machine. See this support article.

  Network backup, use as destination an Apple Time Capsule or an external storage device connected to another Mac or a 802.11ac AirPort base station. Only 802.11ac base stations support time Machine, not older model.

  Otherwise, use Time Machine at all. There are other ways to save, although none of them are nowhere near as effective or as well integrated with OS X. I don't have a specific recommendation.

  If you are determined to continue to use the device with Time Machine, your only remedy for any resulting problem is the manufacturer (who will blame Apple, neither you nor anyone else but herself.)

• OfficeJet Pro 8710: Cannot discover 8710 printer

  System cannot discover printer on re - install (either via USB {tried several ports} or wireless).

  Here's what happened: when printing a large document into segments, the printer stopped printing.  So I tried to erase the impression (QC), but a job is not clear. I rebooted the computer and the printer, but the document was still there and would not either print or deleted.  So I tried to delete all the files in the folder Windows/System32/spooler/printer, but one. File TMP said it was open and should not be deleted.  I rebooted the computer and the printer again, but the document was still in the QC.  I uninstalled the printer and restarted.  Then I tried to re-inistall printer but the system will not recognize.  When I plug the USB for the computer does not recognize the printer via the Wizard Installer HP so I can not proceed with the installation.  I tried to install wireless; the printer can connect to the router, but the computer will not recognize the IP address or the name of the printer.  I did a restore to factory settings on the printer, with the same result.  I downloaded the wizard for help and it will not detect the printer.

  So what I do now?

  Problem solved.  I did a system restore and the computer automatically connected via USB (prior connection method).

• Try to uninstall Pure Networks Network Magic, platform Assistant works, how can I get rid of it, can not find in my system

  Have left nmrsrc.dll and 2 files nmspce2.dll.  Tried to delete it tells me that they are protected and hidden, do not know how to display them, nothing doesn't show in Add/Remove programs and windows search can not find them.

  PFure networks Platform Wizard keeps saying it has encountered a problem and needs to close, have removed the remaining files, but cannot get rid of these two.  What should do?

  Hello

  To view the files in XP follow these steps:

  a. in desktop screen click Start, then Control Panel, Panel Options.

  b. click on the view tab and check the box "see the hidden files and folders" and press OK.

  c. you will now be able to see all files and folders hidden on your computer. You can do a right click on the hidden folder and uncheck the hidden box and apply the changes to display it.

  See this article on how to uninstall Network magic: http://www.purenetworks.com/support/faq/13.html

  http://www6.nohold.NET/Cisco2/UKP.aspx?pid=104&VW=1&articleid=21926

  If you cannot uninstall the program, contact support for Network Magic team.

  Thank you very much for trying to help, find the files I had to remove, they do not delete found files in Mode safe and they deleted properly.  When I cliked show hidden and program files did not see them, Safe Mode works perfectly.  Good job!