Network management problem, computer laptop Windows 7 will not find other computers on any network, however all other computers on the network can access Windows 7 laptop.
Basically, the issue I'm having is that my laptop does not connect to any other computer to access the actions or other files. Other computers on the network can access my computer laptop shares and files without any problems. Operating system is Windows 7 Home Premium x 64.
What I tried:
restarted
uninstalling and reinstalling the files and printers, sharing maps and restart after completion
all disabled firewall
tried with IPv6 enabled and disabled without change, so it is currently enabled
tried on a Wi - Fi and the differences are listed below in the section work (work is wireless)
able to ping other comptuers
access to other computers is permitted by other computers
problem extends over several networks, IE I noticed it at home last night and the followed problem my laptop at work this morning.
The problem is slightly different on the two sites.
At home:
I can see the other computers on the network, but I am unable to access it, even if I have permission, but other computers can access to my laptop.
At work:
Cannot even find other computers on the network but they can find and access my laptop.
I have worked on this problem of non stop for several hours and did much more than what is said, but I am unable to remember everything. I should have been taking notes: P
Here are the results of the ipconfig/all command (I removed the physical addresses for security reasons):
Windows IP configuration
Name of the host...: Radiation-G72
Primary Dns suffix...:
Node... type: hybrid
Active... IP routing: No.
Active... proxy WINS: No.
Wireless Network Connection 2 wireless LAN adapter:
State of the media...: Media disconnected
The connection-specific DNS suffix. :
... Description: Microsoft Virtual WiFi Miniport adapt
Physical address.... : **
DHCP active...: Yes
Autoconfiguration enabled...: Yes
Ethernet connection to the Local network card:
State of the media...: Media disconnected
The connection-specific DNS suffix. : hsd1.ga.comcast.net.
Description...: Realtek PCIe GBE Family Controller
Physical address.... : **
DHCP active...: Yes
Autoconfiguration enabled...: Yes
Wireless network connection Wireless LAN adapter:
The connection-specific DNS suffix. :
... Description: Atheros AR928X Wireless Network adapt
Physical address.... : **
DHCP active...: Yes
Autoconfiguration enabled...: Yes
Address IPv6 local link...: fe80::f4e3:cd1c:6952:eb4d % 11 (Preferred)
IPv4 address: 192.168.2.7 (Preferred)
... Subnet mask: 255.255.255.0.
Lease obtained...: Thursday, February 4, 2010 10:50:32
End of the lease...: Friday, February 5, 2010 08:29:36
... Default gateway. : 192.168.2.1.
DHCP server...: 192.168.2.1.
DHCPv6 IOOKING...: 234890707
DHCPv6 DUID customer...: 00-01-00-01-12-4C-6E-91-00-25-D3-3D-FC-9A
DNS servers...: 192.168.2.1.
NetBIOS over TCP/IP...: enabled
Tunnel adapter isatap. {1797D168-6FC8-4DDF-8338-4E214119C26D}:
State of the media...: Media disconnected
The connection-specific DNS suffix. :
... Description: Microsoft ISATAP adapter
Physical address.... : 00-00-00-00-00-00-00-E0
DHCP active...: No.
Autoconfiguration enabled...: Yes
Card tunnel Teredo Tunneling Pseudo-Interface:
The connection-specific DNS suffix. :
... Description: Teredo Tunneling Pseudo-Interface
Physical address.... : 00-00-00-00-00-00-00-E0
DHCP active...: No.
Autoconfiguration enabled...: Yes
IPv6 address: 2001:0:4137:9e74:4ea:2920:b81a:cdc5 (Preferred)
Address IPv6 local link...: fe80::4ea:2920:b81a:cdc5% 13 (Preferred)
... Default gateway. : ::
NetBIOS over TCP/IP...: disabled
Card adapt 6TO4 tunnel:
State of the media...: Media disconnected
The connection-specific DNS suffix. :
... Description: Microsoft 6to4 card
Physical address.... : 00-00-00-00-00-00-00-E0
DHCP active...: No.
Autoconfiguration enabled...: Yes
Asked this question in the Windows 7 forum also because the problem was between windows 7 and Vista.
Hello
If it has started, you can try a system restore - an update "might" have caused the problem.
1. try a system restore back to a point before that happened. And immediately thereafter enter
Control Panel - Windows updates - top left settings and set it to download and informs you instead
Automatic. Leave it until you are sure that everything is OK and then you can add them one at a time
to troubleshoot BUT click right on and HIDE all the driver updates. Also stop at day of drivers like below
and let this value - manually search for drivers when you think you need. (See how and why to)
stop day of drivers below.)How to make a Vista system restore
http://www.Vistax64.com/tutorials/76905-System-Restore-how.htmlTo uninstall an update if you determine that there are problems - Panel - updated Windows - down left-
Updates installed - uninstall
I had completely forgotten the system restore! While looking into the system restore, I found that when I moved into my new House and has cable Internet installed, the cable technology installed a program of comcast on my computer. This caused me to not be able to connect with other computers. After rolling back to install it before it works! Thank you.
Tags: Windows
Similar Questions
-
Running Windows 7 and I cannot scan my computer or download files, system tray blushed and said, 'the file contains a virus' and the computer, and then delete the file. In the alert section it says that Windows Defender works. But it will not open Setup or scan. try to get a repair tool and the file does not open, he repeats to me, the file contains a virus and it does not open. What can I do other than to bring this problem to the experts. Maybe someone has an answer.
Thanks, D G
Your PC may be infected with the new variant of Sirefef AKA Zero access is. One of the problems is that the downloads are identified (wrongly) as a virus... and it will be often disable and prevent installation of various anti-malware programs.http://www.Microsoft.com/security/portal/threat/encyclopedia/entry.aspx?name=Win32%2FSirefef
Suggest you use HitmanPro Kickstart, which should remove this malware and fix changes made to the computer by the malware: http://www.surfright.nl/en/kickstart , you must use an uninfected computer to download it to a flash drive and then follow the specific directions on how to run the program on the infected computer. Hitman Pro Kickstart is available as a 30 day trial version.
For more information, see http://dl.surfright.nl/Kickstart-FAQ.pdf and http://dl.surfright.nl/Kickstart-User-Manual.pdf
And
http://securitygarden.blogspot.com/2012/04/understanding-Microsoft-anti-malware.html
The Windows Defender program which is pre-installed on W7 and Vista is an antispyware program only... .you must run a program full anti-malware.
http://www.techsupportalert.com/best-free-anti-virus-software.htm
http://www.dslreports.com/Forum/r28298407-2013-anti-virus-poll-
http://www.AV-Comparatives.org/
http://ask-Leo.com/what_security_software_do_you_recommend.html
See the following compliments of quietman7 MS MVP : choose an anti-virus program
-
my laptop will not configure adobe air, I've uninstalled and reinstalled and still have the same problem
Hi David,
1. what exactly happens when you try to configure Adobe Air?
2. you receive all of the error codes or error messages?
If the installation of AIR was very good and you are facing problems with the configuration, you may need to contact Adobe support for further assistance.
-
Component of Windows Installer keeps poping up services.msc tried to stop but he comes back a few seconds, a few times it will not be quick to stop also tried msiexec unreg won't. The following will install manually or with automatic updating.
Microsoft .NET Framework 3.5 SP1 and .NET Framework 2.0 SP2 Security Update for Windows 2000, Windows Server 2003 and Windows XP x 86 (KB979909)
Security Update for Microsoft .NET Framework 1.1 SP1 on Windows XP, Windows Vista and Windows Server 2008 x 86 (KB2416447)
Update Microsoft .NET Framework 3.5 SP1 for Windows Server 2003 and Windows XP x 86 (KB982168)
Security Update for Microsoft .NET Framework 2.0 SP2 and 3.5 SP1 on Windows Server 2003 and Windows XP x 86 (KB2418241)
A security update for .NET Framework 2.0 SP2 and 3.5 SP1 on Windows Server 2003 and Windows XP x 86 (KB983583)
Microsoft .NET Framework 3.5 SP1 and .NET Framework 2.0 SP2 update for Windows Server 2003 and Windows XP x 86 (KB982524)
Update of security for Microsoft Office PowerPoint Viewer 2007 (KB2413381)
Microsoft .NET Framework 3.5 Service Pack 1 and the .NET Framework 3.5 Family Update for versions of .NET 2.0 to 3.5 (KB951847) x 86Hello
· Since when are you facing this problem?
Windows Installer service is damaged. I suggest you follow the steps mentioned below.
Method 1:
I suggest you follow the steps mentioned below.
Step 1:
a. click on "Start" and then click on 'run '.
b. type 'cmd' or 'command' in the box and click on 'OK '.
c. type each of the following commands, and press 'Enter' after all the world:
CD %windir%\system32
Ren msi.dll msi.old
Ren msiexec.exe msiexec.old
Ren msihnd.dll msihnd.old
output
d. Type "exit" at the command prompt to close the command utility.
e. restart your computer.
Step 2:
Download Windows Installer from the following link and install it on the system and see if the problem is resolved.
Windows install 4.5 Redistributable
Method 2:
I suggest to reset the Windows Update components and then try to install updates on the system and check. Follow the steps mentioned below.
How to reset the Windows Update components?
http://support.Microsoft.com/kb/971058
For more reference, click on the link below.
You cannot install some programs or updates
http://support.Microsoft.com/kb/822798
Thanks and regards.
Thahaseena M
Microsoft Answers Support Engineer.
Visit our Microsoft answers feedback Forum and let us know what you think. -
Original title: some programs will not work for me as an administrator, but will work for other users on the same computer. I did a system restore as well as uninstalling and reinstalling programs that do not work without result.
Did you run the System File Checker?
How to repair the operating system and how to restore the configuration of the operating system to an earlier point in time in Windows Vista
http://support.Microsoft.com/kb/936212/#appliesToTry Safe Mode (you have this problem in Mode safe?).
315222 - a Description of the Options in Windows XP (or Vista) Safe Mode boot
http://support.Microsoft.com/default.aspx?scid=kb;en-us;315222&FR=1&PA=1&SD=HSCHIf you cannot reproduce the errors in Mode safe see if you can further isolate the cause.
How to troubleshoot a problem by performing a clean boot in Windows Vista
http://support.Microsoft.com/default.aspx/KB/929135Try running ChkDsk to check your drive for errors. Right click on your drive icon / properties / tools / error checking. First try checking not be (read-only) to see if it reports any problems file or hard drive. If this is the case, start by checking the two boxes, in no other rerun.
Create another user and see if they have the same problem as your current user.
Difficulty of a corrupted user profile
http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profileDifficulty of a corrupted user profile
http://windowshelp.Microsoft.com/Windows/en-us/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx811151 - how to copy user data to a new user profile
http://support.Microsoft.com/?kbid=811151Description of Windows Easy Transfer for Windows Vista
http://support.Microsoft.com/kb/928635How to restore the security settings the default settings?
http://support.Microsoft.com/kb/313222/#appliesTo -
Hi guys. on the macbook in system preferences > sharing there is a box at the top that says "computers on your local network can access your computer at:" means that other people can access my computer?
"Your local network" is the computers that are on the same router as you. At home, this is your family.
to: "computer name" is the name of the computer, they will see.
Access is provided for items you decide to activate, usually file sharing. For sharing of files, ONLY the items that you specify in the file sharing dialog box details panel is accessible and be only users you EXPLICITLY list by username.
-
Windows email will not be printed and give this message "email error unexpected call to the method"
Windows email will not be printed and give this message "email error unexpected call to the method"
is there a solution for this?
Yes, I uninstalled the upgrade to IE9 and rebooted and unfortunately I can print my email again! No more unexpected call to the method. Check my IE and it's IE8.
Problem solved!
Thanks for the replies.
Neal -
Just bought this laptop, original thought it was a big improvement on my Aspire 3 year! Last problem after doing a full scan with McAfee is the touch pad or remote control will move the cursor but will not open other than McAfee programs. The Windows (bottom left) symbol does not illuminate when the cursor is over it and I am unable to use the windows key + C to get the bar of charms.
For the background, I couldn't install windows updates since I got this computer, two days, so do a scan to look for the reasons.
Thanks for your suggestion Acer-Justin. Sorted by switching off / reset the keyboard. Problem sorted update using Microsoft who has found a problem with the update system and then installed Windows 10 - everything looks ok at the moment.
-
After the update to el Capitan my iMac will not be asleep. I put it to sleep and turn off the mouse and keyboard that goes with it, and 5-10 minutes later, he wakes up on his own. Now, I have to stop it after use and each time only. The Major pain. Any help would be greatly appreciated.
Please test after taking each of the steps that you have already tried:
Step 1
Take all of the measures suggested in this support article, including those under the title "If the previous steps do not work." It is the starting point for a new effort to solve the problem.
Note that, as stated in the article, the computer will not sleep, if some sharing services are enabled. In the menu bar, select
▹ System Preferences... ▹ Sharing
Disable all sharing services.
Step 2
If sharing music iTunes home sharing is enabled, disable it or quit iTunes. Do the same with third-party applications that have a similar feature.
Step 3
Select
▹ System Preferences... ▹ Accessibility ▹ Speakable Items: Off
Step 4
Select
▹ System Preferences... ▹ ▹ Advanced Bluetooth...
and uncheck the two boxes marked
Open Bluetooth Setup Assistant at startup if...
Step 5
Step 6
Back up all data.
Triple-click on the line below on this page to select, then copy the text to the Clipboard by pressing Control-C key combination:
/var/vm
In the Finder, select
Go ▹ go to the folder...
from the menu bar and paste it into the box that opens by pressing command + V. You won't see what you pasted a newline being included. Press return.
A folder named 'vm' should open. Inside, there may be a file named 'drag '. Move this file and only this one in the trash, but do not yet empty. You will be asked for your password. Close the folder window.
Restart the computer and empty the trash.
-
I'm trying to import my IE Favorites and have read the instructions, but the import button in the file in gray and will not let me import. Any ideas?
Try using the import option in the Bookmark Manager (also known as the name of the library)
- In Firefox, select the bookmarks menu, then "organize bookmarks" open library
- In the library, select "Import and backup" then "Import HTML.
- You should get I hope that the ability to import from Internet Explorer.
-
the transfer will not find my user account
My XP workstation has my profile with a dot in the name such as "user.systemname".
Easy transfer will not find this user account. I was trying to rename the profile, but the system won't let me not renaming the directory that I do not have enough permissions or something is in use.
How can I get an easy transfer to recognize a profile with a dot in the name?
Like Windows 7...
Create a new user account and transfer your files and settings to the new account.
See: http://fredcoulson.com/blog/fred/index.php/2007/08/15/renaming-your-windows-xp-user-account/
Note: The easy transfer will not migrate type .dat and .tmp files
J W Stuart: http://www.pagestart.com
If that were the case, might as well the user simply copy the content of the personal folder under C:\Documents & Settings of an external hard drive.
Question is the part of a domain user account? If so, that may be why he won't let you rename (without permission).
If you are, I recommend the UN machine in the domain join then rename the account.
-
Will not work my Office Gadets, any ideas on how to fix?
Will not work my Office Gadets, any ideas on how to fix?
Hello
I advise to check on the following website: http://support.microsoft.com/kb/2515657It contains information on doesn't work does no gimmicks and information about the gadgets are not displayed correctly.See also http://windows.microsoft.com/en-PH/windows-vista/Windows-Sidebar-and-gadgets-overviewThis link explains on the gadgets and the sidebar, how to open the sidebar and explains the main features on the gadgets.Thank youI hope this helps. -
local station changed the broadcast signal THAT WMC will not find.
MY frequency changed from local station cbs always on same channel 2.1 & 2.2 windows media center will not find the new frequency. they appear very hard on my tv tuner.
Help.BarbMVP - Windows/entertainment and connected homePlease mark as answer if that answers your question -
"For reasons of security, this program will not work while system debuggers are active. Please remove or disable the system debugger before attempting to run this program again. »
This message appears whenever I try to open Video Edit Magic, I already turned off Norton.Try to adjust the compatibility setting and run...http://Windows.Microsoft.com/en-us/Windows-8/older-programs-compatible-version-Windows
-
I have several Photoshops installed, but Photoshop CC 2014 will not be updated. My Photoshop CC works perfectly and I need the program to 2014. So how can I get rid of the issue of 2014?
HI Richard,
If you are using a windows machine, on which you open programs and features and then right-click on the application Photoshop CC 2014 and click Uninstall.
If you use a Mac, and then open the finder window, click go and select applications, and you'll see Photoshop CC 2014 registered there request, double-click that and you
See the uninstall for Photoshop CC 2014 program, double-click on it to launch the uninstaller.
Please post on the Adobe Forums.
Maybe you are looking for
-
Import Outlook Express e-mail and addresses
We install the mail Tbird on xp client. Question: if I import my willingness to data (address book, emails, folders) they always remain on Outlook Express, or they will be gone? Is essentially importing a MOVEMENT or a COPY function?
-
Why not restore the link to Ctrl-click to open in a new tab?
Between 22 and 24 versions, ctrl - click went as a keyboard shortcut to open a link in a new tab. Now there are two ways: rightclick the link, and choose a Fisher point to open in new tab, or the link middleclick. Right-click and choose the menu item
-
Satellite L300 - 17L - impossible to use the keys FN under Win XP
I recently bought a Toshiba Satellite L300 - 17L and I can't use the combination of keys (Fn + F1, F2...).I downloaded all my drivers Toshiba s website... but nothing... all utilities... and nothing.I use a Win XP OS Please, if you can help me...
-
How low is low wrt LowFrequencyOneCounter
We want to measure the period using CIChannel.CreatePeriodChannel (). The pulses to measure are to about ~ 220 Hz. What is a frequency too high? Obviously, we would like to avoid using two counters for this, if we can avoid. Nathan
-
Image jpeg files too small shot of Canon 6 d
Canon 6 d only recently started to get incredibly small image files. When the large jpeg option, which should produce 20 MB files, the results are now between 5 MB and 4 MB image files. Jpeg image of small and medium-sized settings are also much smal