Network (NIC) card does not work with DHCP or static IP

Hi, I have a ThinkCentre M70e (0809-C6S) with a problem in the network card. The link led is on and Windows detects that a cable has been connected. But the network can not aquire a DHCP lease and does not work with the static IP address. I uninstalled the antivirus and tested nothing helps network booting. The same connecting cable to another PC, works great. If the NIC has been "burned"? Thanks Oliver

Thanks will check the power settings too. But I solved this problem by: - antivirus uninstall - uninstall the card NETWORK Marvell driver - reboot - disable NETWORK card in the BIOS - turn off PC - turn on the NETWORK adapter in the BIOS - install the downloaded in another PC Marvell NIC driver - antivirus install now the NETWORK card works again! Best regards, Oliver

Tags: ThinkCentre

Similar Questions

  • 128 - GB MicroSD card does not work with the new Clip +.

    My old Clip + (black, 8 GB) was getting very long in the tooth, so I ordered a replacement off Amazon.  As far as I know, it is identical to the old, but a very unpleasant difference is presented - it does not work with the MicroSD card which has been a huge part of why I got a Sansa at all.  He acknowledges, but after a media updated I'm lucky if more than one album appears.  And that's what's so crazy!  You just blow through the update in a few seconds, and when I navigate on the map, there is nothing or a handful of albums random, orphaned.  That's happened?  I updated the new Clip + for the current firmware (as I had done with previous); I made sure to reproduce all the parameters that I would be put in place before--I can't imagine what could be the cause!

    Treats quick closing:

    The card is formatted in FAT32 with the same sector size in storage aboard the player (32 768 bytes).

    A 64 GB card format works even without any problem.

    I tried to update the media in MTP and MSC mode; the problem is the same in both.

    There is ample space for MTABLE. SYS - I have not yet loaded all the music on the Clip + itself.

    Rockbox plays the card without problem, but the sound quality is horrible (at least on this player; I'm sure that other versions sound best), and its interface is a headache.  No thanks.

    HM.  Looks like to run CHKDSK /F on the map the problem resolved!

  • Why the visiontek radeon 7970 3 GB graphics card does not work with my xps 8300?

    I bought a Radeon 7970 visintek 3 GB graphic card thinking that it works with my xps 8300. It fits everything is plugged in correctly, but when I turn on my computer does not recognize the graphics card? The graphics card is not broken I build it in another computer and it works perfectly. I am very disappointed at this because I thoughtI would save money, do not buy a new computer and just buy the food and the radeon. It turns out that the Radeon does not work. If someone could tell me what the problem is, that would be greatly appreciated.

    Thank you, Jon

    Hi Jongerber,

    A 500W (or more) power with a 150W power connector 8 pin PCI Express and a connector power 75W 6-pin PCI Express is recommended for the graphics card AMD Radeon 7970. Your XPS 8300 has a diet of 460W. This maybe one of the reasons for the question from the video card works on another computer.

    Please see the link below for the requirements for the graphics card of Radeo 7970:

    http://Dell.to/1brhNaJ

    The following video cards are compatible with the Dell XPS 8300.

    Discreet (PCI Express x 16 card) - NVIDIA GTX460, NVIDIA GT420 (M207)
    ATI Mobility Radeon HD 5670/HD 5770 / HD 5870/HD 5450

    When you click the compatibility Option in the link below, you will see that the XPS 8300 is not listed under supported for the video card Visiontek AMD Radeon 7970 systems.

    http://Dell.to/1bKUFlY

    Hope that the information provided above is useful. Answer please if you have other queries.

    Thank you and best regards,
    Babita S
    #iworkforDell

    For easy access to the drivers, manuals and updates, please visit our Support Site .

  • Network adapter driver does not work with the recovery discs provided by hp

    Hello

    My wireless light does not illuminate. The network adapter driver does not install from the recovery of the driver CD.

    Here is the hardware ID. Please provide a link to the drivers:

    PCI\VEN_10EC & DEV_8176 & SUBSYS_1629103C & REV_01

    PCI\VEN_10EC & DEV_8176 & SUBSYS_1629103C

    PCI\VEN_10EC & DEV_8176 & CC_028000

    PCI\VEN_10EC & DEV_8176 & CC_0280

    Thank you

    You are the very welcome.

    It does not sound like a heat problem.

    I don't know a lot about the repair of hardware issues beyond replacement memory and hard drives.

    I could try to clean the area of fan/radiator with a can of compressed air and see if that clears any dust that may accumulate.

    To do this, disconnect the laptop from the AC adapter and remove the battery.

    Insert a rod through the air fan to keep the blades turning when you spray air.

    Spray through the air intake fan and watch to see the dust out of the exhaust.

    Repeat once or twice and blow air from the other direction of the drain line to the fan.

    The other driver, you need is the driver of protection Protectsmart hard.

    See if it works.

    http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-116584-1&cc=us&DLC=en&LC=en&OS=4063&product=5278311&sw_lang=

  • 16 GB class 6 SDHC SD Card does not work with Camelio H20

    Can anyone help?

    I recently bought the camcorder above. I bought a 16 GB memory card class 6 SDHC separately.

    The map seems to work fine on my PC as a memory device.
    However, I can't work on the camcorder.
    I formatted the card on the PC and the camera but still does not work.

    I read that I might need to partition map. However, the user manual made no mention of this.
    The manual States that and SDHC card up to 32 GB can be used.

    I would appreciate any suggestions or comments!

    Thank you

    Kevin Bray

    Hello

    > I formatted the card on the PC and the camera but still does not work.
    If you have formatted it in camcorder, then the SD card has been recognized in camcorder is it normal?

    So what exactly do you mean by + I can't make it work on the camcorder? +

  • Satellite Pro 4600 Wireless card does not work with WIN2K?

    I have a Satellite Pro 4600 with UK dealer PA3070U-1MPC wireless operating with Windows 2000 card

    The wireless client Manager detects the network from my wireless router and the signal is excellent and I see all the Green swhowing bars.

    But I can't mske a connection in 'connections' wireless says "network cable is disconnected.

    the router works well with other laptops in my house.

    I have the latest version of Win2K also downloaded and installed the latest versions of client manager and WLAN driver for win2k to the toshiba Web site.

    'Support of toshiba in Turkey' told me ' I need another driver for Win2K for my driver wireless card cause win2K on the toshiba site isn't for "thie" wireless card ". I have been waiting for this for 3 weeks now and couldn't join the UK level 3 elusive support who supposed to have this driver. I saw on the internet is the same wireless card was sold as an accessory "made by toshiba" and he said that it is compatible with Wim2K

    What I then please? It works with Win2K, is it "another driver" and so on?

    Thank you

    Hello

    I don t think that there is something wrong with the driver because you can receive signals from router (green bars). If the driver WLan would be a mistake if wouldn t receive all signals.
    Please check device manager. If the wireless card is recognized if you are using the correct driver and the driver has been installed correctly.
    Please see this page:
    http://209.167.114.38/support/TechSupport/TSBs/all/-TSB000705.htm

    In my view, the message "network cable is disconnected" appears because your (NOT wireless) LAN cable is not connected. This post has nothing to do with the question of Wlan.
    You should check your WLan settings again.

  • integrated sound card does not work with windows7

    Hello!
    I have the following and problem that you have not yet found a solution.
    I have a very old pc with a gigabyte GA-8I915P Duo Pro with integrated sound card (c-media 9880).
    I recently installed Windows 7 and it does not start the sound card... (everything else works perfectly fine)
    Please could someone tell me were to find the drivers for the card (gigabyte or c-media have win 7 drivers for my card) or what else to do?
    THX

    See http://www.sevenforums.com/sound-audio/26835-c-media-9880-driver-windows-7-a.html

    If drivers intended it work do not, you will need to install a sound card.

  • Satellite M40-129: PCMCIA card does not work with Linux

    I have D-Link DWL-G650 with Atheros Chipset that is supported under linux (madwifi). But if I boot Linux map is not found. I tested the card with a Fujitsu Siemens laptop and it worked out of the box!

    No idea why it doesn't work with my M40-129?

    Hello

    As you know Toshiba doesn't support Linux and there is no Toshiba drivers for the Linux operating system, but I was able to find this page useful Toshiba on laptop with Linux configuration:
    http://newsletter.toshiba-tro.de/main/

    You must check the machine OS compatibility and other areas.
    I m you will find many useful tips.

    Good luck

  • Data 720 3 lava card does not work with windows 8

    I am not able to install the software of lava on my laptop window8 3 720 data card.

    Tried with compatibility with window7 and has never managed. It says failure of driver to install.

    Tried with windows firewall off while installation that did not help me.

    I couldn't see that any user is successful on this forum with the use of 3G data cards.

    Need the support of Microsoft to resolve this issue or provide a work-around.

    Try this,

    Save & Close all your current works
    Go to the charm Bar (Win + I)
    Click settings to laptop
    Go to the general tab
    Scroll to the bottom, and then click restart under Advanced Startup
    Now it will restart your knees to the Advanced Startup Menu
    Click on Troubleshooting
    Click on Advanced Options
    Click startup parameters
    Click restart
    Your knees will restart and invite another menu to choose
    Press "7" or "F7 ' (Disable driver signing enforcement)" "
    Now your knees will return to market.
    Install your 3G data card software
    When you get the Windows security warning window, click "install this driver anyway" option.

    Hope it will work. ;)

  • 4GB micro card does not work with my PC

    I just went out and I bought a 4 GB micro SDHC for my phone, and I want to put a bunch of music on it from my PC. but my PC does not read the card, and whenever I try to ring its menu, my computer crashes. Can someone help me please?

    Just get another card reader. They are quite in-expensive. Make sure it specifies that it is SDHC in line.

  • Wireless network card does not work with Windows 7 myt

    Hello!

    I installed Windows 7 on an old laptop nc6120 and I can't see any of the wireless networks. With cable, everything works perfectly.

    You are the very welcome.

    Here is the link for the driver you need for the WiFi Intel Pro 2200 B/G card.

    http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?swItem=ob-59471-1&lang=en&cc=us&mode=3&

    That should make it work.

    Then start the windows update program and see if he can find a newer driver.

    If this isn't the case, run the utility driver Intel update and he must find a newer driver.

    http://www.Intel.com/p/en_US/support/detect

    You must have Java installed to run the Intel driver update utility.

    http://www.Java.com/en/download/ie_manual.jsp?locale=en

  • SXS memory card does not work with El Capitan

    Does anyone know of a new driver for SXS with El Capitan?

    A SXS card reader compatible with El Capitan?

  • HP laserjet p1102w: wireless printer does not work with the new wireless network

    My office moved recently and we have a new wireless network. My printer always wireless worked perfectly on the previous network, but it does not work with the new network. I get a message "the printer is offline. I don't know how to reconfigure so that it detects the new wireless network. Can anyone help? Thank you

    Hi Shlomi,
    Thanks a lot for the info. I'll give it a try today...

  • TV tuner does not work with SP1 Vista32 on Qosmio G30

    Hello

    My TV card does not work with Vista32 SP1. Material contol said all workers, but the Media Center Receiver service crashes immediately after departure.

    Did someone knows a solution?

    Your Ruediger

    Hello Ruediger

    I don't know if this will help, but try to remove and install the tuner of TV Toshiba - 2.0.0.61129 again. You can find it on the Toshiba support page.

  • Satellite 5000 with Windows XP, Service Pack 1 is installed and now my sound card does not work

    Everyone knows this problem.

    I have a 5000 Satellite with Windows XP. I installed SP1 and now my sound card does not work.

    Any ideas out there?

    Does anyone have this problem?

    I reinstalled the Yamaha drive a couple of times and always the same: no sound?

    I bought this unit in Holland and it was great until the problem of Service Pack. I heard that Comcom was a dealer right here. Maybe I'll have to make to them, if I can't help here?

Maybe you are looking for

  • Re: Satellite M30X - battery won't charge unless the laptop is turned off!

    Hello I have a Satellite M30X who is about 4 years old and all of a sudden, she stopped electric network load when the laptop is turned on but strangely fees - although very slowly - when it is turned off. Any ideas please. Thanks for your helpAmanda

  • When you view a bigfish site redirect to the atlas site

    Original title: why I'm view.atdmt.com I did a search on the igoogle homepage to ask this question... I have this question and don't understand all... http://view.atdmt.com/action/mmn_bigfishgames.h... (blocked)... I checked the preview and directed

  • Manager VCM of intelligent analysis has stopped working errors

    original title: VCM INTELLIGENT ANALYSIS MANAGER VCM INTELLIGENT ANALYSIS MANAGER has stopped working. system indicates that a program has been stopped. How can I fix it.

  • Picture of the change monitor 90 degrees

    For some unknown reason, perhaps a faulty operation, the image of the changed monitor 90 degrees, as if it was a tablet. The pc runs windows 7 Home premium. How to restore the normal vertical image?

  • Disable recent files

    Is it possible to disable recent files? I can't find anything in the options, is there maybe a registry entry that can be changed?I want to turn it off, because I don't need, 99% of the time I open a file read pdf that once and then delete it, so rec