"Network not found" when installing software, but I'm already on the internet!

Similar Questions

• Satellite L655-1john says error "the path network not found" when starting

  I just bought the laptop above and I did all the stuff he wanted to start and now when it is in the login screen and I go to my user and press ok while I connect it gives me the above message "the network path was not found"

  I have windows 7.
  Does anyone know what I'll do?

  I m confused now.
  After the first start, you must create new account and then you can start Windows 7 preinstalled and use the preinstalled operating system. I can't even imagine that this problem occurs the first commissioning. Recovery images are tested and you can install it 100 times and it should not happen.

  Have you done some changes or anything that might be responsible for this?
  Can get you into SafeMode (F8), create a new account and try to connect with this new account? The same thing happens again?

• Satellite L500 (PSLS0E) - HARD drive not found when installing Win7

  Hello!

  I wanted to install a new Windows 7 (without recovery), but the hard drive was not found during installation. In the start instead menu I can find the drive. So what I need is a driver. But I have no idea where to get one! Can anyone help?

  Version: PSLS0E-06T01KGR

  THX

  Now maybe stupid question but are you using the original installation disk Microsoft Win7?

  I installed Win7 on several different Toshiba laptops (old and new) and HARD drive was visible every time. I deleted existing partitions, created a new and correctly installed Win7 on it.

• C: drive is not found when installing Vista

  I am trying to reinstall windows vista on my computer, but it says there is no driver found? my C drive is not found

  How to do a clean install:

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  See you soon.

  Mick Murphy - Microsoft partner

• No hard drive not found when installing Windows 7

  I have a HP Envy 4 - Ultrabook 1046tx and the operating system Windows 64-bit 8.1. While downgrading to Windows 7 64 bit I was unable to find the hard drives. In the installation screen it showed me "no hard drive found. Click on load a driver to provide a driver for installing mass storage.'.»

  I downloaded all the versions (from most recent to oldest) technology Intel Rapid Storage Technology drivers and I tried install one by one but they do not work and the hard drives are still not visible. But if I use a Windows 8 install disc and install the driver drives are visible.

  I need my computer to display the default hard drives without the need for a SATA driver. How do I do that? My Intel chipset manufacturer and model is Ivy Bridge HM77.

  
  Can someone help me solve the problem please?
  
  Thanks in advance!

  I tried a lot of things these steps. But this has not worked for me. Might work for others. I'm sticking with Windows 8.1 for awhile and I will continue to find other ways. If I find the solution will immediately post the solution in this thread. Thanks to Paul_Tikkanen for helping me!

• CD/dvd driver not found when installing Windows 7 on Asus f501A

  I am trying to install windows 7 on this laptop. Windows 8 are installed, but the drivers for the hardware that I need to use are not supported. I connect to cd/dvd-rom to boot from usb. I can install windows now the next screen ask a driver for the cd/dvd driver.

  I suggest, if you want to run Windows 7 on your system, you must do it through a virtual machine:

  You can use alternatives such as Oracle VirtualBox or VMWare Player.

  https://www.VirtualBox.org/wiki/downloads

  VMware Player;

  http://downloads.VMware.com/d/details/player_401/dGpkYnRwd3didGRwQA==

  or

  You will first need to go to the website of manufacturers for your model computer and first find out if there are native drivers in Windows 7. A large number of computers that are preloaded with Windows 8 have no native driver support for Windows 7 by the manufacturer. If there is no native driver, you will need to consider returning the machine and buying a machine preloaded with Windows 8 Pro with downgrade rights to Windows 7 Professional. Or look through the catalogue of manufacturers for systems already preloaded with Windows 7, usually the business sector will have these options.

• "Page not found" when installing Photoshop 14

  Greetings,

  I get an error message when entering my code redemption online. I do not have a disk to install the program through a DVD. Any idea is appreciated.

  Sincerely,

  ebeltran27

  You can download the app at the bottom of the link:

  Download Photoshop Elements | 10, 12, 14, 11, 13

  Please share the code of redemption in "PRIVATE MESSAGE"

  I hope this helps.

  Concerning

  Megha Rawat

• SE error message: "elements not found" when installing Windows Vista SP2

  Original title: error please help

  I am running vista and currently have service pack 1 to install most programs it said I must have service pack 2, although I tried to install manny time either through the window system update or if a download on the microsoft site and I sill get the messege even while trying to install "no items" and an error code weird, I searched and google ect but don't watch until someone could please help me with this as a carnt install the basic things I need for example: microsoft word-. -.

  Please help before I end up spending 200 + just to buy a new Tower

  Hi jasonv123,

  You can read the following article and try resolution 2: run the system update readiness tool and check if you can install Vista SP2.

  How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues

  http://support.Microsoft.com/kb/947366

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• iertutil.dll was not found when installed IE8

  Explorer cannot start makes no difference if I'm in Mode safe or not. No start button or windows explore but have a wallpaper.  Win xp sp3. No access to internet either!

  Don't have access to the Task Manager. I searched c:\windows\system32\dllcache but can't find that file and the dll is not in and c:\windows\ServicePackFiles\i386

  Iertutil.dll missing Sys32 folder I finished copy, in front of a pc win 7. Who fails to work as it is not recognized!
  Tried to restore the Task Manager, %SystemRoot%\system32\restore\rstrui.exe but that does not work.
  Tried to register the dll too but that would not work.

  Any ideas?

  Your answer me will think so I downloaded IE8 on a separate computer and extract the dll. Copied to an SD card which oddly enough my pc can read (but not my usb key!) and the copiedthe dll in the sytem folder as you suggested. It worked and I now return windows Explorer!

  Thanks a lot a lot, you have been very helpful. Very appreciated for sure.

• Serial number is valid, but qualify product not found when I install the product very

  Serial number is valid, but qualify product not found when I install the product very CS5, development of applications from an upgrade of the disk swap

  installed trial, then what serial application and such can not find I just took CS4 and added this series and CS5 installed, weird, but I'll take

• I get an error code whenever I start my computer. I have loaded several packs of registry repair software but cannot get rid of the message. The message bed error loading c:\windows\system32\pofusido.dll the specified module is not found

  I get an error code whenever I start my computer. I have loaded several packs of registry repair software but cannot get rid of the message. The message bed error loading c:\windows\system32\pofusido.dll the specified module is not found

  Hello

  I googled this file pofusido.dll and it could be caused by a virus.

  I would suggest that you disable the restore mode as viruses use it to reinstall set apart them.

  Download and install the free http://www.malwarebytes.org/

  Restart the computer and keep pressing F8 to get into safe mode with network connection.

  Once you have updated Malwarebytes run and see if it can remove the virus.

  So delete all cookies in your internet Explorer.

  Please keep in mind that my answer is based on the information in your message. More the better I can answer, Slan go foill, Paul

• Illustrator cs6 problem "this file is not found" when open network file

  I used to install the trial version of Illustrator CC on my desk and then during the trial run out I decide to go with illustrator CS6 instead, so I decide to buy &
  Illustrator CS6 install on our desktop and everything seem to be fine except

  the problem is that our .ai file is located on the network design team shared drive.

  When we try to open the file from the network drive with illustrator CS6, it says "this file is not found.

  -We try to copy the file to the network drive on our office and can open the file without problem

  -If we double-click directly on the file from the network drive to start the CS6 illustrator with this file. He has also very good, no problem at all.

  - But if we first open the illustrator CS6 and try opening... and then again browse to this file on the network, then "this file is not found.

  -CS6 Illustrator have no problem opening the file in the local hard disk.

  -Illustrator CC have never this problem, open the file in the drive of our network, try to reinstall the trial of Illustrator CC again and it may open without a problem

  -J' I try to use Adobe CC Cleaner tool to remove everything before you reinstall Illustrator CS6, still no luck.

  -Try to remove the Adobe relate user/user/Appdata folder, and then reinstall, still no luck

  -Try a right click and open with-> Illustrator CS6, Yes if we double-click the file directly, it's ok, but as said if we open illustrator first, then search for the file, the problem happens.

  I missed something to remedy?

  Hi, I just could solve this problem, a path of the folder in our network is contains a character of Thai language.
  When rename us all English characters, it is able to repair!

  Maybe it's a bug since Illustrator CC is quite open this file, but in any case if it works at least I don't have to guess anymore.

  Thanks for the support Dhirendra

• Network not found

  Printer: OfficeJet 4500 Wireless (CQ663A)

  OS: Windows 7

  Router: Netgear824v3

  Channel: 6

  Type: Infrastructure

  Mode: Automatic 108Mbps (selection automatic b/g)

  Security: WPA - PSK

  SSID broadcast: enabled

  Question: network not found.

  two week, Samsung laptop computer (Win7) is located on the network.

  5 months Dell desktop (Win 7) is on the network.

  1 # PS3 connects to the network

  2 # PS3 connects to the network

  Wii connects to the network

  OfficeJet will not find the network.  He finds my neighbors, but not a network for my SSID.

  I repositioned the OfficeJet 15 feet from the router, 6 inches between the router and into another room of the router.  I've moved or shut down wireless devices, speakers, etc., to identify/avoid interference.  I'm confused: why the printer will not detect my SSID broadcast.  It allows to identify the type of secutirty (WPA - PSK TKIP or AES), but can't find my network.  Ridiculous!

  I downloaded, installed a ran HP Network Diagnostic Utility.  He said that the network is fine.  It lists the printer on its own network "hpsetup" but the printer can't find my network to connect when I run USB setup or manual configuration or the wireless Assistant.

  Any help would be great.

  It is certainly strange.  Here are a few ideas:

  1. starting at the front of the printer: Setup > network > wireless network Test.  This will be the radio automatic test to make sure it's OK.

  2. open your Netgear router (type 192.168.1.1 in a browser address bar).  Make sure it has the latest firmware.

  3. While you're here, change the channel to 11.

• Error: ' ATL. DLL was not found"when trying to run any application.

  Original title: ATL. DLL was not found.

  I can't run applications in my pc someone in my house could not get into the computer and changed operating system to windows xp, which allows to be decommissioning of this t. Now, I get this message when I try to run an application: the application failed, because ATL DLL is not found, re - install the applicationmight solve the problem, but I get this message after you have re-installed and I don't know what else to do. Slow computer charges and freezing, something he has never done before. Same IE you have a problem, the only thing that works well, it is the remote assistant who helped me to get here and to him intermet, actually all of this with the dll thing started after I deleted the firefox browser because it froze the computer. Unable to restore my recovery utility, I tried a TI ran and told me it is impossible to get it back before I uninstalled firefox.

  Unfortunately, the support engineer technical 'expert' who is hired by the tips from Microsoft to run sfc/scannow will not help you.

  I would say that, as usual, the technical support engineer has not bothered to reproduce the problem and tried their own suggestion.

  If the atl.dll file is missing, sfc/scannow will launch but it does not work.

  It's just another wild goose chaseSupport Engineer.

  A lot of things will not work if the atl.dll file are missing.  System Restore will not work, Event Viewer do not work, you will not be able to get on the Internet, etc., until the file has been replaced.

  You try to run the system restore, you see the following message is displayed:

  Rstrui.exe - Unable to locate component
  The application has failed to start because ATL DLL not found.  Reinstalling the application may fix this problem.

  Try to open the event viewer, you see a message like this:

  MMC could not create the snap.
  MMC could not create the snap.  The snap-in may not be installed correctly.

  Name: Event Viewer
  CLSID: {975797FC-4E2A-11D0-B702-00C04FD8DBF7}

  Running sfc/scannow will be launched, but it will not run if the ATL DLL file is missing and you will see events like this in the event log (when you arrive, it works again):

  The server {8BC3F05E-D86B-11D0-A075-00C04FB68820} is not registered with DCOM within the required time.

  You can't get on the Internet using any browser.

  You have to somehow replace the missing or damaged file.

  The file might really be missing if he has been quarantined (actually deleted) by your antivirus not specified.  If the file is simply missing, you can just replace it and then later determine what happened to the file and decide what to do about this.

  You can search Windows on your system for ATL DLL and replace the missing file.

  THE ATL. DLL file must be in this folder (assuming that Windows is installed on your C drive):

  c:\Windows\System32

  Check and see if you can find the ATL DLL file in this folder, or if he's really missing, you will need to replace it:

  Depending on what applications you have installed, when you search for your ATL DLL system, you can find ATL DLL in several places on your system.  You must be sure get you the correct that belongs in c:\windows\system32.

  The most likely place to find a good copy of Atlant. DLL will be in one of these folders:

  c:\Windows\System32\dllcache
  c:\windows\system32\ServicePackFiles\i386

  Locate a copy of the correct Atlant. DLL from the file in one of these folders and copy/paste in the folder c:\windows\system32.

  Answered in the affirmative if invited to replace the existing file.

  There is a copy of the file on my SkyDrive, you can download a system not affiliated and then copy the file to a Flash DRIVE or a floppy disk and apply it on the afflicted system c:\windows\system32 folder.  Here's how:

  I downloaded a copy of XP Pro SP3 file you need on my SkyDrive (everyone has a SkyDrive for file sharing).

  You can download it and when you do, place a copy of the file in these two folders (assuming that Windows is installed on your C drive):

  c:\Windows\System32
  c:\Windows\System32\dllcache (this is where XP keeps backups of important files).

  Here is the link to my SkyDrive and you can get the file you need here:

  https://SkyDrive.live.com/?CID=6a7e789cab1d6f39&ID=6A7E789CAB1D6F39! 311

  When you see the files available for download, you can not see the file extension (.exe, .dll, .cpl, .sys, .zip, etc.), but when download you them they will have the right extension.

  When you download the file (especially if you use Internet Explorer), when you get a chance to save the file, your browser is unable to save the file with an extension (by example, .exe, .dll, .cpl, .sys, .zip, etc) then you will need to manually add the extension appropriate to the file when you download the file before you save it.

  You can download the file without the extension, and then rename the file to add the appropriate extension.  You do not want to use a file called atl when the name of the file should really be called atl.dll (if the downloaded file has no extension, you will need to change the name of the file to add the appropriate extension to make it work.

  You then put the downloaded files in the correct folders on your system.

• ;" The application has faild to start because MFC71D. DLL was not found.re - installing the application may fix the problem. »

  I'm trying to use my music software I installed recently in my computer I have get__the next message; "The application has faild to start because MFC71D. Mean what DLL__was does__that does not found.re - installing the application may fix the problem. »

  I tried to re - install several times, and I got the same results

  Hello

  This means that you can try to uninstall the software and then re-install.

  Click Start and Control Panel. Under programs, click on uninstall a program. Find your program in the list, right-click, and choose uninstall.

  When he finished, restart the computer. This will ensure that the system can get a grip on all the files will be released.

  Then download the program again and save the file to your desktop. When he finishes, right-click on the file and select "Run as Administrator".

  Let us know if this helps

  Mark <> Microsoft Partner