Network preferences keep resetting, cannot change or update

Similar Questions

• Cannot change the updates of Windows Vista and Norton 360

  I can't change my settings to Windows Update under Vista. I am the administrator and the only user on the computer. I'm used to be able to make changes to the settings, but have not been able to do for a month. Around the same time this started, I have updated my Norton 360. These two things are related? How can I change the settings? Updates download and install fine, but I want to change the planning parameters. Help, please. The computer has restarted several times now, while things were open and caused problems.

  Hello

  Follow the steps here to reset the file or registry permissions

  http://blogs.msdn.com/b/astebner/archive/2006/09/04/solving-Setup-errors-by-using-the-Subinacl-tool-to-repair-file-and-registry-permissions.aspx

  New attempt of changing the settings

  If that fails, run the System File Checker

  Start > type CMD

  Right click on CMD and select run as administrator

  Type sfc/scannow

  Note: there is a space between sfc and / scannow

  Use the System File Checker tool to repair missing or corrupted system files

  http://support.Microsoft.com/kb/929833/en-us

  Try again to change the settings if the scan shows "no breach of integrity".

• Illustrator 2014: Scratch disk Preference keeps resetting itself

  Hello the Illustrator community.

  I've noticed recently that in my CC 2014 Illustrator 18.0.0, the drive working preference setting still reset itself. I use a MacBook pro with an SSD only, but I have an SSD of Thunderbolt of Lacie external that I had to use as a disk scratch for Illustrator and Photoshop. The problem is that if I set the preference scratch to be used externally as the principal and my school start, all right and me let us know that the change will take effect once it is reopened. The reopening of Illustrator, I'll double check and it is saved, and everything works fine. But if I happen to open Illustrator without my external attached, when I check the preference of scratch, he will return to the use of the commissioning as the main place to scratch, I understand.  But the next time Illustrator opens with my connected externally, the setting still scrape by default using the startup disk. At this point, I would need to change the preference, Illustrator to close and then reopen to make sure that Illustrator uses externally as zero.

  If for some reason it isn't saving my preference for the drive to work, while all other preferences seem to be registered properly. Photoshop of CC, in 2014 I can set preferences for scratch, which works fine, close Photoshop and reopen without attached externally and then close and reopen with handed out in place, and he will remember my preference to have the primary external as the scratch.

  It's just the way that illustrator is supposed to work, or is it maybe a bug? Someone at - it experience with this?

  I used Illustrator CC 17.x.x before that but did not notice that if it work the same way, since that day there I didn't have a dedicated disk that you want to use.

  Thank you very much, I look forward your help and responses!

  The last thing that Adobe HAVE done on a renunciation is to write the existing State of the preferences to disk file. If it uses the local HD than zero, it is what is saved in the preferences.

• Cannot change 'Windows Update' - "Important updates"

  I had my Windows Update for updates but allows me to decide when to download and install the value.  This morning my computer downloaded, installed and rebooted without asking me.  I checked my settings and they are configured to automatically download, install and restart and I can not change the settings, they are grayed out.  I could go into regedit and change the settings here, but wonder why it happened and how I can access the setting of the control panel again.  I am logged in as administrator.  I am running Windows 7 Pro 64-bit.

  [Dupe of http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/c600c8c8-bb99-4a2b-99ce-1d8b8c85d4fe] ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Cannot change the update of Java through the control panel (64-bit version)

  Windows 7 SP1 x 64
  
  Hello
  
  Since no direct feedback to Oracle is possible (the form does not), I use this forum for your comments. Feedback is intended for Oracle, but I appreciate any input from the community.
  
  The x 64 version of Java JRE installation gives you all access to settings update via Control Panel-> Java link. However, Setup installs and activates the update of Java without any recognition of the user. In case you do not want to have a background task running periodically check the updates you must manually change the registry to get rid of this process.
  
  It is bad programming and must be changed with the next update.

  Unfortunately, Oracle look here, it is a programming user to user forum. And they decide for themselves what should or should not set (as you may have noticed see how the Java 7 is handled); If you want any type of control that you will need to get a support contract.

• How can I keep my graphic changes when updating link Excel?

  I have an Excel chart linked in my InDesign file. This graph has no formatting of Excel but I made adjustments to the color, the width of the cells and the size of the graphic in InDesign.

  If I change the Excel file and try to update the link in InDesign, it's the warning that I get...

  "Changes were made to the imported version of [name of file]. You will lose those changes when you update the link. »

  So if I import the Excel file, my InDesign changes do not remain and the chart looks terrible again. How can I set it so my InDesign changes remain and only the data in the graph are updated?

  Thank you!

  I thought about it - I had to put colulm widths on "exactly". Thanks for your help with the rest!

  See you soon!

• My Apple Watch does not OS 2.1 update. Keep saying at the end that cannot verify the update as long as it is not connected to the internet. The iStore even tried and they couldn't help.

  Nice day

  I need help with my Apple Watch. I tried the update to OS 2.1. I can't update as the right at the end of the download it says cannot verify the update as long as it is not connected to the internet. I made sure wifi was strong, batteries were in charge, I have even matched and re-paired the watch. I took it to the iStore so they couldn't get it updated and everything they said was sorry, you will have to wait the next update be released. Everyone dealing with this issue? What should do?

  Concerning

  Hello

  Because the update for you Apple Watch comes from your iphone is your iphone

  Running ios 9.2?

  If, then go to settings on iPhone reset network settings after reset entered your key wireless router.

  Also before doing this turn off your router for 30 seconds.

  Then repeat the update of watch.

  See you soon

  Brian

• I cannot use windows update. The 80070490 error keeps coming back.

  I cannot use windows update.  The 80070490 error keeps coming back.

  I tried "System update tool", "windows repair" and I don't seem to be able to get upgrades using my DVD of windows.  What can I do?

  Any help would be much appreciated

  I cannot use windows update.  The 80070490 error keeps coming back.

  I tried "System update tool", "windows repair" and I don't seem to be able to get upgrades using my DVD of windows.  What can I do?

  Any help would be much appreciated

  Reset your Windows with this FixIt components update:
  How to reset the Windows Update components?

  Reset.

  Try to update.

  If it still does not work, try this...

  1. Start an elevated command prompt.
  2. Run the following commands pressing on enter after each line:
     
     net stop wuauserv
     CD %SystemRoot%\System32
     Ren C:\Windows\SoftwareDistribution SoftwareDistribution.old
     net start wuauserv

  3. Reset
  4. Try to update.

  * Important * When you do this, the following problems occur:

  • Updates that are currently downloaded but which have not yet been installed must be downloaded again by using Windows Update or Microsoft Update.
  • When you remove the Software Distribution folder, your download history is deleted.
  • If you currently receive updates from Microsoft Update and Windows Update, you will need to reselect this option from the Windows Update Web site.

  
  * Note * if the problem is resolved and you can successfully download and install the updates, you can delete the directory SoftwareDistribution.old to recover disk space.

  
  STILL no? We have something to try...

  Use this FixIt:
  How to get the latest version of the Windows Update Agent

  Reset.

  Save components WU:

  1. Start an elevated command prompt.
  2. Run the following commands pressing on enter after each line:

     regsvr32 Jscript.dll
     regsvr32 c:\windows\system32\wuapi.dll
     regsvr32 c:\windows\system32\wuaueng.dll

  Reset.

  Try to update.

  If it still does not work after that - repeat ONCE more that part...

  Reset your Windows with this FixIt components update:
  How to reset the Windows Update components?

  Reset.

  Try to update.

  Come back and let everyone know how you faired.

• How can I keep resetting preferences?

  I downloaded LR 5.5 test. With the help of Mac 10.9.5.  Whenever I open it, all my 'preferences' are by default and must be time consumingly reset.

  How can I keep LR reset preferences?  It does not matter how to open LR 5.5 (from the icon or the cat), it does the same thing.

  He finally got, I think.  The "Préférences" folder (which contains the file 'com.adobelightroom5.plist'), when checked under info, had checked that box called "locked", I assume that thought even the "authorities" were all read/write, this small checkbox prevents the preferences file prevent the change.   Because the preferences file has been "locked", the "com.adobelightroom5.plist" file was never created when LR 5 closed, and the only file it was 'com.adobelightroom.plist' (no '5' designation).

  What is strange, however, the LR4 preferences file is in the same folder, but I've never had this problem using LR4.

  Thanks for your time.  Hoping that it works in the future.

  FC

• Good for laptop - cannot change the ISP; keep returning to a previous provider

  Windows 7 laptop of my grandson, I'm migrating FIREFOX (excellent resource!) of my aging XP desktop. An existing Mozilla installation on the guarded device tries to connect to an ISP in Sydney (1000km) which kept out, I guess because the signal is too weak. Too far - on the Internet?

  Reinstalled my new ISP contact, reinstalled a fresh copy of Firefox, copied the old profile XP (just underneath the random string file name), but cannot change the fault. Firefox at startup tries to raise the old ISP (Sydney) and expires, and then allowing me to establish a manual connect with the ISP (my current) new.
  Perhaps a clue: in my Firefox troubleshooting info, change preferences, the browser start page is the address of 'old', with 'override mstone' ignore, what look like prints of registry entries, but I can't change all that - and maybe it's wise! An annoying secondary question: on arrival, the laptop listed no administrator user. So I am me came as an administrator, but I wonder if a past or current even Admin hidden could register (or other) entered resistant to change.

  Late discovery: the laptop is apparently infected with browser pirate btsearch.name. Search Google throws a series of removal procedures, and I'm now working through them.
  What Miss me?

  Sometimes a problem with Firefox can be a result of malware installed on your computer, you may not be aware of.

  You can try these free programs to search for malicious software that work with your existing anti-virus software:

  • Microsoft safety scanner
  • MalwareBytes' Anti-Malware
  • Anti-Rootkit utility - TDSSKiller
  • AdwCleaner (for more information, see this other AdwCleaner download page)
  • Hitman Pro
  • ESET Online Scanner

  Microsoft Security Essentials is a good permanent antivirus for Windows 7/Vista/XP, if you do not already have one.

  More information can be found in the article troubleshooting Firefox problems caused by malware .

  This solve your problems? Please report to us!

• Cannot change printers, reset failed.

  I cannot change my printer using Firefox. When I try to select another printer from the dropdown menu, the menu will close and I'm still on the printer I used. With the help of troubleshooting, I followed instructions to reset the printer. He failed. I have reset the default printer to a different printer through Windows 7 settings. He failed. I used followed Firefox instructions to reset Firefox (and lost my modules, thank you very much) and it failed. How can I get this printer working again the menu? For now, I'll have to use another browser whenever I want to use a different printer. Not good.

  Create a new profile as a test to see if your profile is the source of the problems.
  
  See creating a profile:

  • https://support.Mozilla.org/KB/Profile-Manager-create-and-remove-Firefox-profiles
  • http://KB.mozillazine.org/Standard_diagnostic_-_Firefox#Profile_issues

  If the new profile works then you can transfer files from a profile already used in the new profile, but be careful not to copy files corrupted to avoid transporting on the problem
  
  Profile backup and restore

  • http://KB.mozillazine.org/Profile_backup
  • https://support.Mozilla.org/en-us/KB/back-and-restore-information-Firefox-profiles
  • http://KB.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

• audio will not play error message says it cannot have been updated or hardware changes have not been detected. I did no hardware changes

  audio will not play error message says it cannot have been updated or hardware changes have not been detected. I did no hardware changes

  Hello ShawnKohl,

  We can also try to go back to a time where he worked with system restore.

  Once this has been done, check the hat of Windows updates are available and hide the audio driver updates that are available.

  System Restore:

  Windows XP - http://support.microsoft.com/kb/306084

  Windows Vista/7 - http://windows.microsoft.com/en-US/windows7/products/features/system-restore

  Updates of masking:

  http://support.Microsoft.com/kb/902992

  Please note that in addition to that, the advice of the previous poster remains true: we want to get the latest audio driver on the system of the manufacturer.

  Best regards

  Matthew_Ha

• I signed on XP Pro SP3 as an administrator but you cannot change the timing of Windows Update to 03:00. All options are not enabled. How can I change the time, updates are made? __

  I signed on XP Pro SP3 as an administrator but you cannot change the timing of Windows Update to 03:00.  All options are not enabled.  How can I change the time that updates are made?

  Hi imoffshore,

   

  Welcome to Microsoft Answers Forums.

  We would like to get some more information from you to help solve your problem. You better, please answer the following questions.

  ·         When was the last time it worked?

  ·         Remember to make changes to the computer recently?

  ·         You have security software installed on the computer?

  ·         You get the error message?

  When you open the tab automatic updates in the control panel or My Computer property sheet, all options of configuration of the automatic updates may be grayed out. This happens due to one of the following reasons:

  1. You are not logged as administrator (or equivalent)
  2. Strategy of automatic updates is enabled
  3. Automatic updates (and Windows Update) access is blocked by group policy

  The options available for automatic updates.

  You must make some changes in the windows registry.

  Important: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows

  http://support.Microsoft.com/kb/322756

  • Click Start, run and type REGEDIT to . EXE
  • Go to this location:

  HKEY_LOCAL_MACHINE-SOFTWARE-policies-Microsoft-Windows------WindowsUpdate------AU

  • In the right pane, delete the two values AUOptions and NoAutoUpdate
  • Go to this location:

  HKEY_CURRENT_USER-SOFTWARE-Microsoft-Windows-CurrentVersion------policies------WindowsUpdate

  • In the right pane, delete the DisableWindowsUpdateAccess value

  Using the Group Policy Editor - for Windows XP Professional

  • Click Start, run and type gpedit.msc
  • Navigate to the following location:

  => Configuration of the computer
  ==> Administrative templates
  ===> Windows components
  ===> Windows Update

  • In the right pane, double-click Configure automatic updates and set it to not configured
  • Next, go to this location:

  => User configuration
  ==> Administrative templates
  ===> Windows components
  ===> Windows Update

  • In the right pane, set to remove access to all Windows Update features on not configured

  Change how Windows installs or notifies you of updates

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-how-Windows-installs-or-notifies-you-about-updates

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Cannot change properties or remove any wireless network

  Hi all

  I can't change the properties or delete any saved in my laptop wireless network. I get an error message:"Windows has encountered an error in the recording of the wireless profile. "Error: access denied".

  I use Windows 7 Professional, logged as administrator. I've updated wireless drivers, but that has not helped.

  Because of this problem, I can not connect to a wireless network, whose password has been changed. When you try to change the password through the andSharingCenter network-> manage wireless networks, I get the above error message. I also tried to delete the network but could not, that nothing is happening, there is no error message, but the network is not removed.

  Can anyone help please?

  Hello

  ·         Are computers on the environment?

  If you are on the environment, you can follow your own thread on TechNet.

  Otherwise, try the suggestions listed in the below given link.

  http://social.answers.Microsoft.com/forums/en-us/vistanetworking/thread/e34c4690-4737-49bc-a06b-2a1f6711c7ae

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Cannot change network type in Windows 8

  How can I change a network or private so that file sharing is allowed? I thought that you could click on it from pop to subwindow network on the right side of the screen, but only my physical network connection is listed.

  More details:

  I have a physical Ethernet connection which is defined as a private network. Sharing files and any other communication on my LAN works fine. I also have a virtual connection through LogMeIn Hamachi which is defined as a public network. I can't find a way to change this. How to change network type in Windows 7 does not work in Windows 8.

  Once, I was able to change the type of Ethernet from the public to the private network by selecting that I wanted to turn on sharing. Although now I cannot access the menu to change that pop on the pane by clicking on the icon of simple network. I was also able to do it once with the Hamachi network, but only the physical card network seemed to save the change after a while. At a time the network Hamachi was not identified, but he has switched back to show as a public network. That's if everything goes though temporary and can be another problem together.

  I don't want to make an exception in my firewall, or make registry changes that specify all unidentified networks are established privately (two suggestions I found on the web so far).

  So it took me a while to find this also, I fixed it by searching for troubleshooting as suggested above. In troubleshooting search box (top right) type homegroup, and then select the resolution of the problems of the residential group, even if you're not using home group, part of the diagnosis allows you to change the type of network from public to private/home, I jumped the diagnostic network also step and allowed me to very easily change the type of network.