network printer old now not recognized when plugged as local printer (USB)

Similar Questions

• my cd/dvd is not recognized when plugged in these days, why?

  I use to play CDs both audio and video on my laptop, but it has suddenly stopped working. I tried to troubleshoot via Control Panel and set the Center, without success. What then can I please? Thank you.

  From the description of the question that you provided, it seems that your CD/DVD drive is not displayed as a drive when you open your Windows Explorer (by clicking Start -> Computer). The suggestion I provided below only applies to this question. If your problem is different from what I understand, please let us know in details.

  First, open the following Microsoft Knowledge Base article:

  http://support.Microsoft.com/kb/982116

  Scroll down to the section I would like to fix it myselfand then perform the steps mentioned in that there is place for Windows 7 and Vista.

  Because Please be careful during the implementation of these measures, they involve work on the registry. "The serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. ' You can also perform a backup of the registry by following this link.

  If the problem is not resolved by following this change in the registry, you must look in the section Remove and reinstall drivers if the drive is not listed in this article and uninstall/reinstall the drivers for your CD/DVD drive in the computer.

  These steps should address the issue. Let us know if you still need assistance, we will be happy to help you!

• We get the popup "USB device not recognized", when nothing is connected.

  Original title: pop up message

  I connected the USB cord to transfer information from your old phone to new phone via Itunes.  Since that time that I keep getting a pop up message that says: device not recognized USB, the defective device, windows does not recognize.  Nothing is plugged in, but message appears every few seconds.  How can I get him to stop?

  Hello

  It seems that you are getting the popup "USB device not recognized", when nothing is connected.

  What is the brand and model of your computer?

  I suggest to uninstall the USB controllers and check if you get the context menu.

  
  

  Method 1: Remove and reinstall all USB controllers

  
  

  a. clickStart, type devmgmt.msc in the start search box and press ENTER.

  b. expandBus USB controllers.

  c. right-click on each device under theBus USB controllers node and then click Uninstall to remove them one at a time.

  d. restart the computer, and windows will install the rear USB drivers.

  If reinstalling USB host controllers fails to resolve the issue, go to method 2.

  Method 2: See the procedure suggested by johnkelly46 responded on October 26, 2009, from this link.

  If you have additional problems, please reply to this post and we will be happy to help you further.

• Keyboard Dell Bluetooth is not recognized when energy savings and will not wake my computer. My usb mouse not recognized or the other.

  My Dell Bluetooth keyboard is not recognized when energy savings and will not wake my computer. My usb mouse not recognized or the other.  I use keyboard now, but it seems not be installed yet when I check my keyboard or bluetooth devices. Keyboard does not work after so I'll try to figure out what to do before moving into the power saving mode. Help, please. I did all the updates from microsoft, and there is no update for my bluetooth device, I checked.

  Hello

  1. have you made changes on the computer before this problem?
  2. What is the model of the keyboard?
  3. are you an error message or error code?
  4. which version of the Windows operating system is installed on your computer?

  I suggest you to consult the following Microsoft article and check if it helps.

  On troubleshooting in Windows 7 power management: http://support.microsoft.com/kb/980869

  Troubleshoot keyboard: http://windows.microsoft.com/en-US/windows-vista/Troubleshoot-keyboard-problems

  Keyboard and Microsoft mouse refer:

  Troubleshoot the incidents of the response to the mouse or wireless keyboard: http://support.microsoft.com/kb/838398

  Reference:

  Troubleshooting external Dell Wireless or Bluetooth keyboards and mice: http://support.Dell.com/support/topics/global.aspx/support/KCS/document?docid=277550#Issue0_1

• The dial of the watch is not recognized when I touch it or by scanning

  Sometimes the dial of the watch is not recognized when I touch it or by scanning. This could be the cause?

  Hello

  It can help to restart your iPhone and your watch. Turn both devices off first, and then restart your iPhone before restarting your watch:

  -To switch off your watch: press and hold the button side until you see the cursor off the power; slide it to turn off;

  -To switch on: press and hold the side button until you see the Apple logo.

• automatic password is not recognized when I change the password, but in vain

  automatic password is not recognized when I connect in outlook express. He saw the day without obvious reason. I tried to change the password, but to no avail.    A ny comments or solutions?  Jong

  Hi Jong,

  ·         What is the full error message?

  I suggest you to consult the article in the Microsoft Knowledge Base and check if it helps.

  Save the password setting will no longer exist in Outlook or Outlook Express

  http://support.Microsoft.com/kb/290684

  I hope this helps.

• Fast user inop on vista switch. How to re - enable it. "gpedit.msc" is not recognized when I try to use it.

  original title: I see questions but no answers. Fast user inop on vista switch. How to re - enable it. "gpedit.msc" is not recognized when I try to use it.

  I have vista on my dell desktop pc. Some how I managed to disable the fast user switching and I wan't to reactivate. I see this same issue, and it implies that the answer to the question, but I see no real response. I see online that using 'gpedit.msc' will open a window to access the problem, but my computer can't find it. Can you please help.

  The Group Policy Editor is not included in the Home of Windows versions. You can use one of the other methods in this article:

  http://www.Vistax64.com/tutorials/89939-fast-user-switching.html

• my camera is not recognized when you try to shoot teathered into lightroom, I spin el capitan, someone knows how to solve this problem

  my camera is not recognized when you try to shoot teathered into lightroom, I spin el capitan, someone knows how to solve this problem

  Return to the previous MAC OS until it's resolved.

  Lightroom and El Capitan | Mac OS 10.11

• Why not the serial number is not recognized when I got Adobe?

  Why the serial number is not recognized when I got Adobe? I have an upgrade of CS5.5 Design and Web Pre3mium worm. CS6. I use the CS5.5 serial number.

  using cs5.5 serial number when you are prompted for the serial number of the 5.5 version or when you are prompted for the serial number of the version 6.0?

  If cs5.5 is already installed, you will be invited to the series of 5.5.

  If you are sure you entered the correct serial number at the OK prompt and always having a problem, contact adobe support: www.adobe.com/support/chat/ivrchat.html

• Dell coming 8 Pro loaded but does not or be recognized when plugged into PC.

  I drained the battery (yellow light) and responsible for the overnight with cord provided Dell and adapter, until white light. Now, it does not or be recognized when connected to my Dell PC.

  I ordered and new adapter and cord. Any ideas out there? Had this 3 months, with a few other problems.

  Perhaps I'm not following, but you try to have your desktop/laptop physically connected to the Dell Tablet for the Tablet is recognized on the desktop/tablet computer similar to a flash drive? As far as I know, this is not possible. You can, however, access to some of the files on your desktop computer Tablet / laptop (and vice versa) using Windows, if both devices are on the same network.

• USB stick not recognized when you try to copy network settings

  trying to Setup network printer and need to copy my network settings on a USB stick and transfer to the printer wireless.

  When I plug the USB in the system recognizes the disk put option on the screen doesn't change to the other to allow the settings file be saved.

  I tried 2 different laptops and 2 different usb drives.

  Hi GavinStrik,

  You can try to reformat the usb drive and check.

  You can try to plug the drive and make a backup of the data and try to format the drive.

  Note: Before you reformat the player take a backup of the data.

  For more information, please visit the following links:

  Formatting disks and drives

  http://Windows.Microsoft.com/en-us/Windows-Vista/formatting-disks-and-drives

  Hope this information is useful.

• USB device not recognized when connecting to printer

  Hello Microsoft,

  Hear I have problem in my PC. I connect to my new printer (RIOCH SP 100), but in my Winodws7, they show me that your usb device is not recognized. I try to use the resolution of problems. but it was a failure of dem, so now what is the way to solve my query.

  Hello Dhruv,

  Thanks for posting your question on the Microsoft community.

  We need more information about the issue so that we can help you better.

  What is the complete model of your printer RICOH SP 100 number?

  Thank you for details on the issue.

  This problem may occur because of settings and corrupt device drivers.

  I would suggest trying the following methods and check if it helps.

  Method 1:
  Run the hardware and devices Troubleshooter and check.
  Reference:
  Open the hardware and devices Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  It checks the common issues of interest and ensures that a new device or hardware connected to your computer has been installed correctly.

  Please also run the printer Troubleshooter and check.
  Reference:
  Open the printer Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  He made sure that a printer is connected to your computer, and it checks for common issues such as whether the printer has enough paper and toner to complete printing your document.

  If this does not help, use method 2.

  Method 2:
  Controllers USB reinstall and check the issue. Please follow these steps:

  a. press Windows + R keys together, type devmgmt.msc in the run window and press ENTER.

  (b) in Device Manager, expand 'USB Bus controllers'.

  c. right-click any device under "Controllers of Bus USB" and click Uninstall.

  d. repeat the same steps for other devices.

  e. Once completed, restart the computer.

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• Windows 7 printer and HP1120c using gigaware usb, a parallel printer cable is not recognized by plug-and-play

  I can't get my printer recognized by plug-and-play.  I have installed a printer manually, but still can not get to work.  All boards

  Hello Kirk,

  I'm not sure what you mean by "manually installed", but you need a print driver for the printer recognized by Windows. Go to this page to download the driver you need for whatever version of Windows you have: http://h20000.www2.hp.com/bizsupport/TechSupport/DriverDownload.jsp?pnameOID=14497&locale=en_US&taskId=135&prodSeriesId=25522&prodTypeId=18972&lang=en&cc=us .

  Once you have downloaded the right print driver, I let the computer do the installation.  NOTE: you may need to completely uninstall what you've done "manually" so that the correct driver is working correctly. See the HP Web site for more information (I'd do it, but I do not know what operating system you have and its depth of Bit (32 or 64)).

  Post here if you need further instructions or assistance (be sure to include your OS and Bit depth). Let me know how you fare.

  Kind regards

  BearPup

• Selected by default is not recognized when I want to print from stored photos

  I have 2 printers with wireless connections, connected to the operating system to 64-bit computer laptop Dell 1737. #1 printer is a Dell model 305 and printer #2 is a new HP ENVY5530 all-in-one. When I select the HP printer as the default printer, that it will not respond when I try to print from the files of pictures I have stored in the computers hardrive, default is the Dell 305 to the place. I have Culatello, the wall of fire as the problem. Note: If not, it responds so designated for other tasks.

  Hello @REB54,

  Welcome to the HP Forums!

  I understand that your 5530 craving is not let you define default on your computer. I will do my best to help you! Please follow this entire thread of @SuperMario1 on: Re: HP1510 0 x 00000709 can not set as default printer.

  Please post your results, I will be looking forward to hear from your part have a good night!

• USB device not recognized (Nothing plugged and the mouse does not)

  My mouse (microsoft) wireless worked well until what within hours.
  then I said to unrecognized USB device
  The port works, but for some reason any
  the mouse is not, went bought another mouse and still getting the same message.
  Plus I get the USB device not recognized pop up, same
  Tho, nothing is plugged into one of the USB ports.
  Any suggestions on how to solve this problem

  Computer brand and model?  Windows OS?

  Open the Device Manager

  Click on the + sign next to USB controllers

  Do you not see that unknown device listed?

  Right click on the playlists of USB root hub

  Select uninstall

  Close Device Manager

  Restart the computer to Windows reload the drivers

  USB is now recognized?

  If failed, shutdown computer.  Unplug it from the electrical outlet.  Leave unplugged for 1 to 2 minutes.  Plug the unit in and restart the computer.

  USB is now recognized?

  How to troubleshoot USB device problems that can occur after a laptop computer that is running Windows Vista recovery from sleep or standby extended

  http://support.Microsoft.com/kb/953367

  Windows Vista does not recognize a USB external optical disc drive when you reconnect the USB optical drive to the computer drive

  http://support.Microsoft.com/kb/944292

  Run the System File Checker

  Right-click on command prompt and select run as administrator

  Type sfc/scannow

  Press enter

  Note: there is a space between sfc and / scannow

  How to analyze the log generated by the SFC Scan file:
  http://support.Microsoft.com/kb/928228