network printer shows off line but printsf by other computers on the network

my brother mfc-7840w printer displayed offliine when I try to print from a computer on a network, but works fine on other computers on the same network. I remove and reinstalled printer. Works for a short time but when computer turned off and rebooted the printer go offline. a stop printer, etc.

Hello

Follow the steps in the link below and check if it solves the problem.
http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/network-printer-goes-offline-on-Windows-7/df4321de-EE25-423F-b1c9-d38957d50131

Kind regards
Afzal Taher
Microsoft technical support engineer

Tags: Windows

Similar Questions

  • HP Officejet Pro L7590 shows off line but a valid IP address

    I have a new internet provider and have changed the position of the router in my house.

    The printer worked perfectly and was connected with an ethernet cable

    Now the printer reports be offline, but is accessible via IP address.

    New facility is fine, including printing the testpage, but as soon as I finished the installation of the printer goes offline and it is impossible to print.

    I tried on all computers and the portable in my house (XP, Vista, W7, W8) but without success

    I also have a HP OfficeJet Pro L7780 and that one works perfectly (before and after the arrangement of the wires)

    What can I do?

    It was really frustrating that all aid programs ended with only one solution: "turn on printer.

    Normally, I should be able to simply ignore the expiration date. But somehow a little code froze. just a question from 0 to 1

    I prefer not to put the exact solution here because messing around in REGEDIT mode is something you should not do if you don't know what you're doing. (like me... but luckily it worked for me)

    I only hope that there will be no update for my printer because it could start all over again

    Thank you all for your help and time!

  • HP Photosmart C310: HP Photosmart wireless Printer C310 - says offline but works on other devices on the network

    One of my laptops - HP envy, does not work with the printer. Message says that the printer is offline. However, it is turned on and works with the iphone 6s and another laptop. Works perfectly so far - it's something new. Have not changed OS or whatever be done differently that I know and I am the only user on this laptop. Help, please!

    Have also checked for new drivers using the HP tool scan - but there is no apparently

    Hello @lynnegibband welcome to the Forums of HP! I'd love to help you print on your printer Photosmart c310 from your laptop Envy. I understand that even if the laptop indicates that the printer is offline, your iPhone and the laptop of another can still print to it. Please use the following to fix the problem and let me know the result of your efforts: HP printers - printer (Windows 8) "offline" Status Message.

    If this document helps you solve the problem, please click Accept button Solution below to report your post as solved. If you need help, please don't forget to let me know and I will gladly make all that I can to help.

    Thank you.

  • Is it possible to have windows to automatically select a spare printer by default when the selected default printer is off line?

    I use a laptop and move between two locations each with its own printer.  Whenever I move, I have to change the default printer by opening printers & faxes from the control panel.  Is it possible to have windows to automatically select a spare printer by default when the selected default printer is off line?

    Hi Tom,

    If the default printer is not in offline mode, it will detect the different printer but it will not be a default one.

  • Using Windows 7 and 8.1 of Windows via a shared house group the WF-2540 Epson printer is off line.

    Original title: printer is offline

    using Windows 7 and 8.1 of Windows via a shared house group the WF-2540 Epson printer is off line.  This printer uses with two PCs using Windows 7 and a PC using Windows 8 with no problems.  Today it usually just printing using 1 PC with 7-1 8.  It is connected to the PC works well.  This isn't wired wireless we have wireless at the office.   Use this way for years with no problems, then suddenly this morning its all stopped.  I read so much information on it with no satisfactory response.  Epson will not know that it is not connected via radio or directly with a PC, so I'll through in circles.

    I reinstalled the PC on Windows 8 PC nothing works.  Any suggestions as to what I can try next as business has ground to stand without the printer!

    Thank you

    Hello

    Thank you for visiting Microsoft Community.

    I suggest you to post your query on our TechNet Forums social as this question right here.

    Please refer to the reference to the link below to send your request:

    https://social.technet.Microsoft.com/forums/Windows/en-us/home?Forum=w7itpronetworking

    Sincerely,

    Ankit Rajput

  • Cannot print the printer is off line with 14 documents pending.

    Original title: Printing print HPrinter
    My printer is off line with 14 documents pending.  How can I get it online and cancel pending documents.

    Hi Helen,

    I understand that your printer is off line and there are 14 documents waiting in the queue.

    Here are a few troubleshooting steps that you can try to solve this problem.


    Method 1: Run the printer Troubleshooter and check.

    a. open the printer Troubleshooter by sliding in the edge right of the screen, tap Search (or if you use a mouse, pointing to the top right of the screen, move the mouse down and then clicking Search), entering the Troubleshooting in the search box, by typing or clicking on settings and then type or click on find and fix problems. Under hardware and sound, click use a printer.

    b. follow the steps in the resolution of the problems.

    If the method above does not work, proceed to the next method.

    Method 2: Disable the documents waiting in the queue, check the following suggestions.

    a. the key press Windows + R and type services.msc in the search field and press to enter.

    b. the Services listed, stop the print spooler service.
    (c) in Windows Explorer, navigate to the folder below and open the PRINTERS.
    C:\Windows\system32\spool\PRINTERS
    d. click on continue or Yes (if prompted by UAC) to approve the opening of the PRINTERS folder.
    e. remove all files in the PRINTERS folder, until it is empty, and then close Windows Explorer.
    Note: DO NOT DELETE the PRINTERS folder itself. Don't delete its content.
    f. open Services, and then start the print spooler service.

    Also see suggestions from the following link:

    http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-8&V1H=win8tab4&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

    After completing the methods suggested above, answer us with the State of the question.

  • I can't start a desktop connection remote with my file server, but I can't get to my domain controller. Other computers on the network can initiate together.

    Using server 2003 as DC and server 2003 as a FS. Problem computer running windows 7 upgraded to vista professional. I can open a desktop session with the domain controller remotely, but I can't launch with the fs. Other computers on the domain have no problem with a server opening. I have access to shared folders on the MSDS via LAN and can ping the fs. Also can not use MySQL on the fs with this computer. FS cannot launch the Office with the computer problem remotely but can with others.

    Hi Gary,.

    Thanks for posting in the Microsoft Community.

    The question you posted would be better suited in the TechNet Forums; We recommend that you post your question in the TechNet Forums to get help:

    http://social.technet.Microsoft.com/forums/en-us/smallbusinessserver/threads

    If you need Windows guru, do not hesitate to post your questions and we will be happy to help you.

  • CAN´t find other computers on the home network Windows.

    I have a home network windows already defined with two desktop with Windows XP and a laptop with Windows 2000. The computers are connected to a router with ethernet cables and the lap top wireless (WiFi) to the same router. Now, I'm trying to connect a fourth computer (a desk top) with Windows Vista. It works fine to connect to Internet, but I can't reach the other computers on the network. On other computers, I can see a 'new', but I don't see the others of a "new". Can someone help me with the configuration of the computer "Vista"?  Thanks in advance.  / Thomas

    Hello
     
    To home network computers running different versions of Windows, we need to make sure that what follows.
    a. ensure that all computers are in the same workgroup.
    (b) the value of the private network location type.
    c. open ports in your firewall to allow file and printer sharing.
    d. turn on additional file and printer sharing options.
    e. consider using password protected sharing.
    5 using the network card.
     
    The NIC in the network and sharing Center is a graphical view of the computers and devices on your network, showing how they are connected and including problem areas. A computer running Windows XP can be detected and appear on the network map, you may need to install the Protocol Link-Layer Topology Discovery (LLTD) on this computer.
     
    To install LLTD, visit the following link and download: http://support.microsoft.com/kb/922120
     
    For more information on the "networking running different versions of Windows' computers, visit the following link:
    http://Windows.Microsoft.com/en-us/Windows-Vista/Networking-home-computers-running-different-versions-of-Windows
     
    I hope this helps.
     
    Kind regards
    Syed V
    Answers from Microsoft supports the engineer.

  • Cannot see other computers on the network

    Am on XP SP3.
    When I go to network connections,
    Right-click on local area network
    Click Properties under the general tab,
    Click on install and click Service
    .. all I see is a list for a McAfee driver but nothing for Microsoft. I removed my computer some time ago with McAfee & he must have created problems that I can't see other computers on the network. Is there a Microsoft driver, I need to install and which will help to solve the problem of not seeing other computers on the network.

    On the general tab of the properties of your network connection to the LAN card, you should see a box under the heading "this connection uses the following items."  Most Windows XP configurations for home use have 4 entries in this box: Client for Microsoft Networks, QoS Packet Scheduler, file sharing and printers for Microsoft Networks, and Internet (TCP/IP) Protocol.

    If you don't have these, you need to install, even if you really need not the Scheduler of QoS packages.

    You seem to have got almost to the right place, but be aware that when you click on the button 'Install' in the box, you are given 3 choices: customer, Service and Protocol.  The "Client for Microsoft networks" is obviously a "customer." 'Internet (TCP/IP) Protocol' is a 'Protocol' and the other two are "Services".

    What elements you have installed?

  • WRT160N - can't see other computers on the network

    I installed a new WRT160N and now I can't see other computers on my local network, but I can access the internet on each of them.

    Y at - it a setting that I need to change or what I need to use static IP instead of DHCP addresses?

    If you cannot ping the other computers on the network, then check your firewall settings or any other security software blocking the connection.

  • Network management problem, computer laptop Windows 7 will not find other computers on any network, however all other computers on the network can access Windows 7 laptop.

    Basically, the issue I'm having is that my laptop does not connect to any other computer to access the actions or other files.  Other computers on the network can access my computer laptop shares and files without any problems.  Operating system is Windows 7 Home Premium x 64.

    What I tried:

    restarted
    uninstalling and reinstalling the files and printers, sharing maps and restart after completion
    all disabled firewall
    tried with IPv6 enabled and disabled without change, so it is currently enabled
    tried on a Wi - Fi and the differences are listed below in the section work (work is wireless)
    able to ping other comptuers
    access to other computers is permitted by other computers

    problem extends over several networks, IE I noticed it at home last night and the followed problem my laptop at work this morning.
    The problem is slightly different on the two sites.

    At home:
    I can see the other computers on the network, but I am unable to access it, even if I have permission, but other computers can access to my laptop.

    At work:
    Cannot even find other computers on the network but they can find and access my laptop.

    I have worked on this problem of non stop for several hours and did much more than what is said, but I am unable to remember everything.  I should have been taking notes: P

    Here are the results of the ipconfig/all command (I removed the physical addresses for security reasons):

    Windows IP configuration

    Name of the host...: Radiation-G72
    Primary Dns suffix...:
    Node... type: hybrid
    Active... IP routing: No.
    Active... proxy WINS: No.

    Wireless Network Connection 2 wireless LAN adapter:

    State of the media...: Media disconnected
    The connection-specific DNS suffix. :
    ... Description: Microsoft Virtual WiFi Miniport adapt
    Physical address.... :  **
    DHCP active...: Yes
    Autoconfiguration enabled...: Yes

    Ethernet connection to the Local network card:

    State of the media...: Media disconnected
    The connection-specific DNS suffix. : hsd1.ga.comcast.net.
    Description...: Realtek PCIe GBE Family Controller
    Physical address.... :  **
    DHCP active...: Yes
    Autoconfiguration enabled...: Yes

    Wireless network connection Wireless LAN adapter:

    The connection-specific DNS suffix. :
    ... Description: Atheros AR928X Wireless Network adapt
    Physical address.... :  **
    DHCP active...: Yes
    Autoconfiguration enabled...: Yes
    Address IPv6 local link...: fe80::f4e3:cd1c:6952:eb4d % 11 (Preferred)
    IPv4 address: 192.168.2.7 (Preferred)
    ... Subnet mask: 255.255.255.0.
    Lease obtained...: Thursday, February 4, 2010 10:50:32
    End of the lease...: Friday, February 5, 2010 08:29:36
    ... Default gateway. : 192.168.2.1.
    DHCP server...: 192.168.2.1.
    DHCPv6 IOOKING...: 234890707
    DHCPv6 DUID customer...: 00-01-00-01-12-4C-6E-91-00-25-D3-3D-FC-9A
    DNS servers...: 192.168.2.1.
    NetBIOS over TCP/IP...: enabled

    Tunnel adapter isatap. {1797D168-6FC8-4DDF-8338-4E214119C26D}:

    State of the media...: Media disconnected
    The connection-specific DNS suffix. :
    ... Description: Microsoft ISATAP adapter
    Physical address.... : 00-00-00-00-00-00-00-E0
    DHCP active...: No.
    Autoconfiguration enabled...: Yes

    Card tunnel Teredo Tunneling Pseudo-Interface:

    The connection-specific DNS suffix. :
    ... Description: Teredo Tunneling Pseudo-Interface
    Physical address.... : 00-00-00-00-00-00-00-E0
    DHCP active...: No.
    Autoconfiguration enabled...: Yes
    IPv6 address: 2001:0:4137:9e74:4ea:2920:b81a:cdc5 (Preferred)
    Address IPv6 local link...: fe80::4ea:2920:b81a:cdc5% 13 (Preferred)
    ... Default gateway. : ::
    NetBIOS over TCP/IP...: disabled

    Card adapt 6TO4 tunnel:

    State of the media...: Media disconnected
    The connection-specific DNS suffix. :
    ... Description: Microsoft 6to4 card
    Physical address.... : 00-00-00-00-00-00-00-E0
    DHCP active...: No.
    Autoconfiguration enabled...: Yes

    Asked this question in the Windows 7 forum also because the problem was between windows 7 and Vista.

    Hello

    If it has started, you can try a system restore - an update "might" have caused the problem.

    1. try a system restore back to a point before that happened. And immediately thereafter enter
    Control Panel - Windows updates - top left settings and set it to download and informs you instead
    Automatic. Leave it until you are sure that everything is OK and then you can add them one at a time
    to troubleshoot BUT click right on and HIDE all the driver updates. Also stop at day of drivers like below
    and let this value - manually search for drivers when you think you need. (See how and why to)
    stop day of drivers below.)

    How to make a Vista system restore
    http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

    To uninstall an update if you determine that there are problems - Panel - updated Windows - down left-
    Updates installed - uninstall

    I had completely forgotten the system restore!  While looking into the system restore, I found that when I moved into my new House and has cable Internet installed, the cable technology installed a program of comcast on my computer.  This caused me to not be able to connect with other computers.  After rolling back to install it before it works!   Thank you.

  • Cannot see other computers on the network of the office.

    I can't see other computers on the network from my office, but if I type in \\xxxxxxxxxxx I'm able to get on the other computers on the network. How can I have them automatically appear?

    I'm terribly sorry for wasting your time.

    I realized what the problem was. I've implemented the new computer exactly as the old, same name and everything. Come and find the computer name of the computer being the same as the old conflict and did not again see what was on the network.

    So the trick was unplug the old computer from the network.
  • Client VPN prevents internet access from other computers on the network

    Hello.

    I run Client ver 4.6.03.0021 from an office on a network of 11 computers via a hub 16-port. Internet access is through an ICS gateway to the cable modem. Once I changed the modem cable to test a backup and then switched back to the original modem. After this, only computers that have the VPN Client (running or not) could access the internet. Computers that have no customer VPN can access only certain sites. Commonly viewed sites would say "site found. Waiting for answer", but the answer would never come and IE 6.1 cling. When I would try ping sites, it would fail. However, some sites such as Google.com would work.

    On one of the computers, on a whim of head, I installed the VPN Client but have not set up a connection. Now, this computer will connect to any website I want.

    Is there a fix easier to get access to other computers on the network without installing the VPN Client on each of them?

    Thank you

    H. Adams

    Hello

    Looks like you are running in MTU problem. The reason I say it is, automatically reduces the MTU value to 1300 VPN client during the installation for the whole system. That is to say all the client computer installed VPN that have MTU from 1300.

    Try to cut down the MTU of other systems that have no VPN client installed to 1300. If it's a Windows system, you can use Dr. TCP (free).

    Vikas

  • Unable to access server vm from other computers on the network.

    SE host: Windows 7 Edition home premium 64-bit

    VM Server OS: Fedora Core 9, with a NAT net configuration

    I can access the IP address of the server to the virtual machine to the host machine, but unable to hit if other computers on the network.  This is the first time doing this on a machine Windows 7, so please let me know if Miss me something, because I did it on other OS and it worked.

    Thanx

    As I posted in your second post...

    You need to configure port forwarding if you want to access the guest from outside the host. You must change the VMWare NAT configuration for this file (see you second post).

    The host can access the guest without the redirect because it shares the same (virtual) network (VMnet8) with comments. Do not externel systems. They must go through the physical host NIC first. This is where redirection comes in the game.

    AWo

    \[:o]===\[o:]

    = You want to have this ad as a ringtone on your mobile phone? =

    = Send 'Assignment' to 911 for only $999999,99! =

  • If I downloaded the program from the site but do not run or install ammyy, is my computer safe? Are my other computers in the House at risk if they were not present?

    I went ammyy.com, makes the download - but do not run or install it - bailed on the idea and hit the 'x' renunciation instead.  Is my computer safe? Also are the other computers in the House if they were not on.

    I went ammyy.com, makes the download - but do not run or install it - bailed on the idea and hit the 'x' renunciation instead.  Is my computer safe? Also are the other computers in the House if they were not on.

    I don't know which is the site of ammyy, and I don't know what you have downloaded. If you just downloaded a file and tried not to install or run, there are no danger to him, niether to your computer or any other. If you think it's dangerous, just delete it.

Maybe you are looking for

  • Unable to make payments, open google site etc. due to sec_error_bad_signature

    Error:The secure connection failed An error occurred during a connection to www.google.co.in. The peer certificate has an invalid signature. (Error code: sec_error_bad_signature) The page you are trying to view cannot be shown because the authenticit

  • My Toshiba L10 will not start!

    Hi all My Toshiba L10 (3 months) will start not especially when transported from one workplace to another. I have this problem more and more frequently. I'm so worried. Could you please tell me if it is an indicator of a serious problem with my compu

  • Re: Satellite A500 - installation driver Bluetooth does not end

    Hello I have a problem with my Bluetooth device.It was great to work for a year and then he disappeared, I tried to install all the different types of batteries Bluetooth.Yesterday, I finally got my pc to factory settings. I tried to start Bluetooth,

  • 1070ec dv5 startup problem

    Hi all. I have a problem with my laptop Pavilion DV5-1070ec (FM585EA). As usual, I turned off it and next day the morning it does not start. Just the power LED button flashes once and nothing else. I tried the Reset hardware, but not good. Can someon

  • mSATA ssd as cache drive in w530

    Hi, I bought an msata ssd 32 G used as a disk cache. I installed and windows can recognize it. But I do not know how to partition (at least the windows won't let me partition compmgmt.msc) and how to activate it as the hard drive cache. Thank you!