Network printers go to status suspended when printing on 64-bit windows systems 7

Similar Questions

• Printer has stopped printing on 64-bit Windows 7 HP Probook computer laptop using the USB connection.

  I recently bought a HP Probook and connected the laptop to an old but very faithful computer HP Laserjet 5 p. The HP Probook uses a Windows 7 64-bit operating system. The printer is connected to one of the USB ports on the laptop.

  Printing worked fine until yesterday. To my knowledge, no update of the operating system took place. I tried change usb port, remove and reinstall the driver package, start and stop of the spool printing, deleting the temporary files in spool it print without result. When I click on print a Test Page, it seems to go to the printer, but is located in the coil. I also ran Print Microsoft FixIt which can't find any problem apart from the removal of the queue.

  To check the cable, I plugged the printer on an old Vista HP Pavilion laptop and no problem printing.

  I'm at a loss what to try next and would therefore appreciate all thoughts.

  Thank you.

  How have you tried to uninstall the printer?

  Here are some ways you can do it.

  1. go to the Start Menu

  2. all programs

  3 file HP

  4. choose the name of the printer

  5 down to uninstall.

  Another way to check if it is deleted.

  1. click on Start Menu

  2. type in the Device Manager in the search bar

  3. in devices, look under the tabs, IMAGE Manager and DEVICES, PRINTERS and another tab that could involve the printer.

  4. If he's there, RIGHT CLICK and uninstall.

• Share a printer on 32-bit and print from 64-bit Windows 7

  We have a printer (HP Lasetjet 2200dn) installed in Windows XP 32-bit Machine and recently we got a machine (laptop) Windows 7 64. But when trying to connect to the shared printer on end of windows 7 with the failure of installing the drivers. And then we check that it connect locally and it installed within a few seconds and work very well.

  But we want to share the printer from the 32-bit windows xp computer

  BR
  Darshana

  Here is the Vista Forums.

  For any question on Windows 7:

  http://social.answers.Microsoft.com/forums/en-us/category/Windows7

  Link above is Windows 7 Forum for questions on Windows 7.

  Windows 7 questions should be directed to the it.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  XP forums:

  http://social.answers.Microsoft.com/forums/en-us/category/WindowsXP

  Link above is for XP Forums.

  There is a list of the different Forums XP to the link above to help you.

  You get the help you need there.

  See you soon

  Mick Murphy - Microsoft partner

• OfficeJet 6500 has + cannot print - ops 8.1 Windows system

  Hello

  I'm having printing documents of problem on my home network printer. The printer has a static IP address. other computers can print except this one (touch-screen HP Envy 15 ") running on windows 8.1 system operations. I can communicate with the printer and see it on the network. Re-installing the printer does not work on the computer. I am able to do your own print on HP print and Scan Doctor (HPPSD) internal education. Printer diagnostics shows everything in order. When I print it gives error "unable to communicate with the printer.  HPPSD said that there is software problem and instruct to remove and reinstall. Same results thereafter. Could someone help?

  In appreciation

  Monty

  Hey Monty,

  I would recommend doing a file check:

  By using the System File Checker to restore system files

  I would then suggest you refreshing Windows:

  How to refresh, reset or restore your PC

  I would recommend then follows agai through with the stesp provided previously.

  Please let me know how it goes!

• Konica magicolor 2430 DL printer & laptop 32 bit Windows 7

  What are my options when my konica Magicolor 2430 DL printer (& 3 toners unused) are not compatible with my 32-bit laptop to windows 7? How can I get a compatible driver?

  Hello

  Color 2430 DL printer Konica Magi range is compatible with windows 7. I suggest you to download and install the drivers from the following link:
  http://onyxftp.mykonicaminolta.com/download/searchresults.aspx?ProductName=Konica%20magicolor%202430%20

  Install a printer
  http://Windows.Microsoft.com/en-us/Windows7/install-a-printer

• cfprint: network printers

  Hello all,.

  I saw a few resets on this topic but none was very descriptive. Here's my question:

  1. my application generates built coins lot numbers.

  2 or the users print to a network printer (Zebra ZM400) label size 2 "X 0.5".

  3. the data must go to the printer - query. LotNumber, query. PartNumber, copies is '#query. "Amount #

  CFadmin does not recognize network printers and is there an example of cfprint with cfreport out there somewhere.

  djkhalif wrote:

  CFadmin does not recognize network printers

  It will be, if you configure your server to recognize the network resources.

  Most likey we are talking about a Windows system, I presume.  By defaul, a ColdFusion service runs under the "LocalSystem" account, which has no permissions to network resources.  Simply configure the ColdFusion service in the panal Windows service to ' newspaper as ' a domain user and make sure that this domain user is configured with permissions to the network of your choice like this printer resources.

  It is best to create a domain specifically for ColdFusion service user instead of using the account of any man.

  HTH

  Ian

• Autorun only opens when plug iPhone 5 under Windows 7

  Hello-

  This may feel like a repeat post, but I tried all the recommendations on this forum and others.

  When I plug my iphone 5 in my HP laptop with a 7/64-bit Windows system, nothing happens.

  I did the following:

  (1) clicked on all the appropriate settings in the AutoPlay window to launch when a device is plugged.

  -all cameras or devices are invited to open automatically or 'import' (still does not open)

  (2) click the button start , click principally made programs, accessories, right-click Guest, and then click Run as administrator.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation. At the command prompt, type net start shellhwdetection, and then press ENTER. Restart your computer.

  -J' have completed this task, and nothing has changed once I restarted my pc.

  3) go to "hardware and sound" in the control panel of configuration, "devices and printers" where you should see listed with a! mark by the latter. Right-click, and then click "Troubleshoot", then the computer must run a diagnosis and then reinstall the driver for it.

  -My computer doesn't detect any problems so no other steps should be taken.

  I want to do is to download/import pictures from my iphone to my pc. Should not be that hard, it should?

  I appreciate all advice and suggestions, you can offer.

  Thank you and have a nice day.

  Evelyn

  Hello

  I imagine the inconvenience that you are experiencing and will certainly help you in the right direction to solve the problem. However, I would be grateful if you could answer a few questions to refine the question in order to provide you with better assistance.

  1. Have you tried to connect to any other USB device? If so, was the same result?
  2. You did it all change important before the show?
  3. Are all the device drivers and updates of Windows updated?

  According to the description of the problem your iPhone 5 is not detected by your Windows 7 computer. Your efforts to resolve the issue is highly appreciated. If it is not detected then it could be the chance that it is hidden, then try to activate hidden objects in Device Manager and see if you are able to see this device.

  Try these steps and see if it helps you to solve the problem.

  Method 1

  Try to activate hidden objects in Device Manager and see if you are able to see this device.

  1. Click Start
  2. In the Search box, type command prompt .
  3. In the list right click on command prompt and select run as administrator.
  4. At a command prompt, type the following command and press ENTER:
     Set devmgr_show_nonpresent_devices = 1
  5. IN the following line from the command prompt, type the following command and press ENTER:
     Start devmgmt.msc.
  6. When the Device Manager opens, click on view
  7. Now, click Show hidden devices.

  Method 2

  If the problem persists, try the steps mentioned below.

  1. Click the button Start of Windows/Home
  2. Type "devmgmt.msc" in the text search (without quotes). Or go to the Device Manager in the Control Panel, or right-click on my computer > properties, select "Device Manager" in the left pane of...
  3. Expand "USB Bus controllers.
  4. While the iphone is connected, click on the unknown device.
  5. Even right click and click on Update driver software
  6. Click the second option "Browse my computer for driver software".
  7. Click on "Let me pick from a list of drivers for devices on my computer."
  8. Click "disk".
  9. Access to the path 'C:\Program Files\Common Apple Mobile Device Support\Drivers.
  10. Select 'usbaapl.inf'.
  11. Now select "Apple Mobile Device USB Driver" in the material model list.
  12. It will add "Apple Mobile Device USB Driver" under "Universal Serial Bus controllers"
  13. Restart your computer.

  Hope it would help. If problem persists always post back with the current state of your computer and the result of the proposed suggestion, we will be happy to help you.

  Kind regards

• Lp2443 Elton print is not on windows 7

  I had windows xp with a printer Eltron lp2443 connected printer. I now have a new computer with windows 7. Connected the Eltron printer with the computer via a USB port. Waring happens as "does not that police" have installed the driver for the printer Eltron and fonfs. Any suggestions as to why not print or recognize (you set the default printer)

  See http://www.zebra.com/id/zebra/na/en/index/products/printers/discontinued.html

  If you are running 32 bit Windows 7, XP driver can install in compatibility mode, otherwise you will need a new printer.

• When you try to install windows 7 64 bit, he asked me to remove the disc and start over, but it does not help. Help, please.

  So I have a 32-bit windows system 7 and I'm trying to upgrade to a windows 7 64-bit system.

  I have an installation disc, and my pc should be able to handle 64-bit.

  However, when I insert the disc (yes my drive is started first in the BIOS)

  The installation program starts,

  I have chosen the language,

  Accept the terms and choose to upgrade.

  He then gives a compatibility report:

  "the computer has started using the windows installation disc remove the installation disc and restart your computer so that windows starts normally.

  When I restart my pc while the disc nothing happens and when I restart my pc with the drive the process repeats.

  I'm looking for for a long time on the internet and I can't find all the solutions that work for me.

  Please give detailed answers, all help its appreciated.

  Boot from the Windows 7 DVD
  Click Install now
  Accept the license agreement
  When the option is displayed to select a type of installation, click (Custom advanced)
  Select the disk partition where you want to install Windows 7 click Next.

  You will receive the following warning:
  The partition you have selected may contain files from a previous Installation of Windows. If so, these files and folders will be moved to a folder named Windows.old. You will be able to access the information in Windows.old, but you will be able to use your previous version of Windows.
  (At all costs, do NOT click on anything in Format, deletion or Partition name.) So even do a custom installation, your personal files are still kept. Click OK

  The installation program will now begin installation. During installation, your computer will be restarted several times.

  After the first reboot, set the BIOS to boot from the hard drive.

  Once the installation is complete, you can complete the Out of Box experience as the choice of your laptop, create a username, password, your time zone. You can then proceed to download the latest updates for Windows and reinstall your applications and drivers.

  You can then retrieve your personal files from the Windows.old folder and reinstall all of your applications and drivers.

  http://notebooks.com/2010/11/09/how-to-recover-documents-music-and-email-after-upgrading-with-the-Windows-old-folder/

• I have a Dell laptop. I recently had the 32 bit installed Vista deleted years Windows 7 system. I can't use my printer Dell 922 to 32 bits on this 64-bit windows 7. I need a driver. Any suggestions?

  Need driver for Dell 922 printer with 64 bit Windows 7 installed.

  Moved from feedback

  Dick Stevens,

  First run, delete print jobs to eliminate any print job stuck in the queue.

  Unplug the printer.

  Download and run the patch (cleaning printer utility) until it prompts you to restart your computer.

  Restart your computer. Make sure that the printer is deleted. Deleting Manual printer driver

  Download the 32-bit drivers for Vista for Windows 7 32-bit or 64-bit drivers for Windows 7 64 bit Vista. Install the Vista drivers in Vista compatibility mode, you will get a message, the printer is not connected. Connect the printer at the moment (power on).

  You will find links to the patch/drivers to...

  Reference Dell 922 Photo all-in-One Printer owners thread (W7)

  Don't forget the programs anti-virus and firewall will block communications.

  Rick

• Windows 7 does not print on network printers

  Hello

  I have a network with 3 Windows 7 Machines and 3 network printers, all have static IP addresses.  Printers are all different manufacturers...

  I can't seem to print correctly to all printers of 2 machines, but having problems with the 3rd.

  Used to work, it has stopped working recently.

  Printers will install correctly and appear to be working, but then I get a yellow exclamation on printers.  When I try to print to the printer, the jobs go to the queue printing, and finally, I get a message in the queue - "printing error".  I do not receive a message printer offline."

  I can successfully ping command on the ip addresses of printers, and appropriate answers.

  The only way I am able to use these printers on this particular machine is if I connect to them by another machine of work (shared printers) is not a viable solution, as I then have the machine on that printers are shared from to be able to print.

  I tried a lot of different things; creating a user profile, uninstall and reinstall the printers, unchecking SMTP in the advanced settings of the printers, deleted and then recreated ports, the system restore when printers were working properly, etc.

  I have scanned for viruses, etc.

  When I try to print to a specific printer, the software that is installed to manage the printer will also open as if work goes to print, but it never did and finally error.

  I did a lot of research in the forums and tried almost all outside to reload the operating system.  It is a last resort...

  Any help would be greatly appreciated...

  It is a coup in the water, but on the only other thing I can think of.

  You can reset the print subsystem in its default state by running the following Microsoft Fixit routine--> http://go.microsoft.com/?linkid=9829711

  I suggest you uninstall all software related to printers using the control panel > programs and features before running the Fixit.  Close all open applications before running the Fixit.

  The Fixit allows uninstalling all printers and requires a reboot after the execution.  After the reboot, reinstall using freshly downloaded software from the website of the manufacturer of the printer.

  Details of what the routine Fixit are described here--> http://blogs.technet.com/b/askperf/archive/2012/02/24/microsoft-fixit-for-printing.aspx?Redirected=true&PageIndex=1

• How to get Firefox to ignore the status of liaison visits when printing?

  How to get Firefox to ignore the status of liaison visits when printing?

  When I print something, visited links are a different color than unvisited links.
  Is there a way to make the color even when printing?
  (without changing the story, or how things look on the screen)

  If there isn't a way to do that, how about this by adding as a feature?

  One way to do would be to create style rules customized for the printed output that hardcode the link colors for all of the printed output. Firefox supports two ways to proceed: a file userContent.css that you create in the folder settings, and a custom stylesheet applied using the Stylish extension.

  However, 'one size fits all' could lead to unreadable results or ugly on some pages. If an add-on that can do adaptive way would be better. I do not know if someone has created a.

  For sites that do not require a login and that are not personalized, you could launch the page in a private window (right click on the link > open in a new private window or copy the URL and then Ctrl + Shift + p, then paste it in the address bar and enter). Because private windows have their own history, the print should not reflect the history of your regular windows.

• Can't print on network printers after Microsoft Update

  I have 3 other computer Windows XP SP3, which, after having done the automatic updates in the last 4 days. (Week of (13/09/2010) have lost the ability to print on network printers.  Computers are different subnets, using different brands of printers.  In any printer IP can be crazy and network connections are good.

  Have deleted updates using Add / Remove programs in Control Panel.  Have deleted the printers and ports and re-installed, changed the settings of the printer to print directly, restarted the printer-queue service.  All have failed to correct the problem.  What Miss me?

  I found the solution to my computers.  Apparently, there was an interaction between Windows Update and McAfee in which McAfee ended up with a list of blocked for the server application entry of spooling print:

  The application name = Spooler SubSystem App
  Application = C:\WINDOWS\SYSTEM32\SPOOLSV path. EXE

  Once I changed the permissions to "Allow" for this application, I was able to print directly to the printer again.

• I have the driver for my printer but when I run the wizard the drop down of printers who does not understand my printer HP deskjet 9650.

  original title: printer drivers
  I have the driver for my printer but when I run the wizard tells me I need us the built in xp Printer Wizard to install the printer on this operating system. When I go to do this, it gives a fall to the bottom of the printers who does not understand my printer HP deskjet 9650.

  Is there a way do not use the Printer Wizard because I have the right driver. Only, it is not listed through the wizard.

  Hi michelledumont,

  Follow the steps in the article.

  Resources for the resolution of the printer in Windows XP problems

  For reference:

  How to install a printer driver locally for a remote printer in Windows XP

• Problem adding network printers; received this message error «Windows cannot connect to the printer or the name of the printer...» »

  Hello

  I have a Windows XP pro (Lenovo) that I recently ran the recovery and returned to certain configurations of 1.5 years. Now I can't add a network printer and get always the message error «Windows cannot connect to the printer or the name of the printer...» ». I ping the printer and all on my network can add these printers, it's just that a machine that fails to add network printers.

  I disabled the firewall, but were still unable to add the printer. Then I found some difficulties to register for a similar problem, but they were not useful... It really becomes a big headache, especially Windows restore does not work...

  I strongly suspect that 1.5 years, someone has renamed the printer.  Use Windows Explorer to navigate to the print server through My Network Places and see what it's callednow .  Otherwise, you could ask your network/system administrator.  You should know... Please vote if this has been helpful!  Please, click on Brand or propose as answer if that answered your question!