Network Realtek PCIe none seeing green or orange

I'm having a HP touchsmart 300-1360 pc and was working fine until after a storm of light that affected my region and cooked my router and my network card stop working and it did not appear on the Device Manager. After a few days the PCIe reatek'a went on Device Manager some how but without light active and the State. I order one from ebay. When I removed the map brocking he was always on the device manager that the card works fine when there was in fact no realtek card.

Replace it with the one I bought, but still there was no active light and the State. I downloaded a tool on the site of realtek (Realtek Ethernet Diagnostic Utility) and to the card if it says works well but still no light active or status. The only time where that the status and the light comes on, that's when running the diagnostic tool.

I did a restore factury, update the driver, clear the Cmos but still nothing.

When I run the Diagnostic Utility clear yellow active lights up and the status light will Flash 2 or 3 times and that's it.

Thanks for any help

Hello chuckiman

I suppose you also have a new router because the former was a good friend? If you plug the ethernet cable from the router to the computer, the router port light upward?

Also, what operating system are you using? I think that the problem cannot be with the new card itself but maybe a setting on the computer or something wrong with the router/cable ethernet port.

Tags: HP Desktops

Similar Questions

  • Network connection problem Wifi (Ralink RT5390R...) and Ethernet LAN (Realtek PCIe...)

    Hello

    With my HP Desktop Pavilion P6-2417eb on a 64-bit Windows 8.1 platform, I have serious problems to connect to a network or the internet. The office is connected to a router with wifi capabilities and modem broadband with wireless internet capabilities.

    Several other devices (computer laptop Lan and Wifi; Android tablets; IOS Tablet; netbooks; NAS server) are connected to the network via wifi and Ethernet LAN calbe with no problems.

    After a long period of crossing possible problems, I come to the conclusion that it is a problem of my dekstop PC-related equipment. In the past, a reboot of the desktop computer was enough to settle the problem, but these days it is no longer possible. This afternoon I was able to connect for 15 min and after it ended again. It was the first in a week again. I post this message with my laptop. I have 4 possible for Internet connection but no wok with this desktop computer.

    The following products do not work in my desktop pc:

    • Ethernet Lan, Realtek PCIe GBE Family Controller
    • WiFi, Ralink RT5390R 802.1bgn Wifi adapter

    What can I do? What are the solutions?

    Thanks in advance for any help.

    LB1503

    Hello:

    The only suggestions I can offer would be to see if updating the drivers for these devices help everything.

    Here is the latest driver for the card directly from Mediatek (Ralink) wireless:

    RT2790 / RT309X / RT35X2 / RT539X / RT3290 / MT7630)
         		15/04/2014 V5.0.46.0 Win7 32/64 Win8 32/64 Win8.1 32/64

    Here is the latest driver for the ethernet card.  Download and install the third-party driver on the list.

    http://218.210.127.131/downloads/downloadsView.aspx?langid=1&PNid=13&pfid=5&level=5&Conn=4&DownTypeID=3&GETDOWN=false

  • HP Envy laptop: Realtek PCIe GBE Family Controller BUG

    Bug Windows 10 Ethernet (Realtek PCIe GBE Family Controller)

    a known bug, my laptop after a few windows updates stop to work as described on the microsoft community...

    The network stops working after a few seconds after the "Repair Procedure. Then runs, but the repetitions of history...

    http://answers.Microsoft.com/en-us/Windows/Forum/windows_10-networking/Windows-10-Ethernet-bug-Realt...

    HP HEELP ME!

    Hi @flash370z,

    E-roqis not available right now, so I'll help you.

    Please see this document for Troubleshooting Wired Home networks (Windows 10).

    Here is a link to download the latest drivers from the network. Local Area Network (LAN) Driver Realtek

    Please keep me informed of the progress of things.

    If you need help, let me know and I will gladly make all that I can to help you.

    Please let me know if that solves the problem by marking this post as "accept as a Solution.
    To simply say thank you, click the Thumbs up below!

    Thank you.

  • network controller pci, drivers wifi device does not

    my model is dv6-6121tx

    I'm not able to install network controller and PCI device drivers...

    also my wifi does not work...

    no adapter in Device Manager wireless...

    Help, please...

    Hello again.

    The computer initially has Windows 8?

    First, download the following drivers.

    Here is a link for the driver Broadcom Wireless LAN for Windows 7.
    Here is a link to the Realtek PCI Card Reader for Windows 7.
    Here is a link to the HP Quick Launch Button for Windows 7 software.

    Now, you will need to remove the previous drivers before installing these.  Try the following.

    1. Click Start, type "Device Manager" and press ENTER.
    2. Right click on each of the devices that you listed above and select 'uninstall '.  If you are prompted to remove driver and driver package.
    3. Quit Device Manager and install the three drivers that I posted above.
    4. Once all three installed, you must restart your laptop.
    5. After Windows loads, you must again visit the Device Manager and see if the exclamation points are gone.
    6. Check that the equipment works and post the result.

    If you find this useful or want to say thanks you can click the White Star under my name to give me congratulations.  Also, if this solves your problem make sure you mark the post as solved.  This makes it easier for other users to find answers to their questions.

    I'll keep an eye out for your answer.  Have an amazing day.

  • What is realtek pcie gbe controller family? Why, he appears NOW in my computer?

    My HP desktop computer is the host of a wireless network (the guests are my HP laptop and the Mac Mini snow leopard recently added)

    Just got back from Florida and now I can't find the name of my network wireless in my network screen: I now find a LAN connection and the device is Realtek pcie gbe family controller.

    (my host computers are able to connect to the internet, wireless, through the network established by the name of wwwxxxyyy).

    Why can't we find this wireless by name in network and sharing of the desktop (host) HP Center? What is Realtek? who makes it?
    I'm SURE in this particular situation?      MAB

    Hello

    As mentioned above (tetraethyle3), the RealTek is network cable from the laptop card and that it can exist in parallel for the wireless. That is, it should not be the reason why the Wireless does not work.

    If your wireless network does not work, try to find out why.
    ------------
    Assuming that wireless router is configured correctly, it is a signal and the wireless card on the computer is physically in.

    Maybe this can help.

    These steps and tell us where is the breaking point.

    Check the Device Manager for the wireless card valid entry.

    http://www.ezlan.NET/Win7/net_dm.jpg

    If there is no valid entry, remove any entry from fake and re - install the drivers for the wireless card.

    Check network connections to make sure that you have a network icon/entry wireless connection, and that the properties of the icon (right-click on the icon) are correctly configured with the TCP/IPv4 protocol in the properties of network connections.

    http://www.ezlan.NET/Win7/net_connection_tcp.jpg

    ------------------

    The wireless card drivers much also install utility wireless of the seller.

    To ensure that if there is Wireless Utility a seller is not running with the native Windows wireless utility (Service WLAN).

    ----------------

    Make sure you firewall No. preventing / blocks wireless components to join the network.

    Some 3rd AV/Firewall/security software part, s costume keep blocking aspects of Local traffic even it they are off (disabled).

    If possible set up the firewall correctly, /Security costume otherwise totally uninstall and get rid of its remaining processes that permit the own local network traffic flow.

    If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

    party like Hello and NetMagic 3rd network managers can block local traffic too.

    ---------------------------

    Stack TCP/IP work should look like.

    Right-click on the wireless network connection card, select status, details and see if she got an IP address and the rest of the settings.

    http://www.ezlan.NET/Win7/status-NIC.jpg

    Description is the data of the card making.

    The physical address is MAC of the card number.

    The xx must be a number between 0 and 255 (all xx even number).

    YY should be between 0 and 255

    ZZ should be between 0 and 255 (zz all the same number.)

    The date of the lease must be valid at the present time.

    * Note 1. IP that starts with 169.xxx.xxx.xxx isn't valid functional IP.

    * Note 2. There could be an IPv6 entries too. However, they are not functional for Internet or LAN traffic. They are necessary for Win 7 homegroup special configuration.

    ---------------------------------------------------

    A message in the small window that says connected wireless doesn't means that you are really a valid functional connection.

    Above everything is OK, you must be able to connect to the router.

    Connection to the router means that you can enter the IP of the router base in an address bar in one go, being able to connect and configure the router menus see.

    If it doesn't connect to the router, journal newspaper from any computer that can connect to the router wirelessly with a wire, disable wireless security, make sure that the wireless SSID broadcast is enabled and try to connect with no. wireless security.

    Enable security wireless after you eat to make a functional connection.

  • No Internet! Windows 7 Realtek PCIE Ethernet (CODE 10) "device cannot start?

    I have no internet connection at all. I desperately need help. I read a lot of questions on the subject up a network and running and general network issues, but none have been equalled my question. I seem to have a "Code 10" error saying that my ethernet controller "device cannot start." I'll force the uninstall and let windows reinstall them, and they do not. I have uninstall/install the force and they fail. Disable/re-inabling does not work. The RJ45 port only flashes every now and then 6 times in a row in an orange color. I don't know what to do. I am running windows 7 hp 64 bit. I have not had this problem before, and the internet worked on this machine. It seems that I booted up once and I had this problem since. I'm wired to the rear of the at & t linksys router so I don't know why it does not recognize the connection. When I leave the system to diagnose the problem, it says "RTL 8168C (P) / 8111C (P) Family PCI - E Gigabit Ethernet NIC (NDIS 6.20) knows driver or hardware related issues.»

    Thanks in advance for the help.

    Hi, I had simiar issues mentioned in my post above, everythying was working fine one day, then the day I started the PC and had no ethernet... I tried to do a CLR CMOS to try to reset the BIOS where he had gotten corrupted, it has not helped.

    However I havee been downloaded the file most recent BIOS my mobo manufacturer and cela flashed to the computer and it restored my connection to the local network.

    I hope this can be useful for you.

  • Realtek PCIe Gbe family controller findFile error absent during the installation of the driver

    Model: HP ENVY TouchSmart 15-j052nr

    Question: Has lowered Windows 8 for windows 7 and

    (1) question:

    everything works fine except no USB 3.0 ports are working. I see an unknown device and it is not able to find the driver.

    Unknown device: Details column has ID Hardword

    IUSB3\ROOT_HUB30 & VID_8086 & PID_8C31 & REV_0005 & SID_1962103C

    IUSB3\ROOT_HUB30 & VID_8086 & PID_8C31 & REV_0005

    IUSB3\ROOT_HUB30 & VID_8086 & PID_8C31

    I tried to install https://downloadcenter.intel.com/Detail_Desc.aspx?DwnldID=22824 but it did not help.

    (2) question

    Another question: the Ethernet controller is missing the driver and I get findfile failed when I try to install the driver

    Controller Realtek PCIe Gbe family

    Error: http://answers.microsoft.com/en-us/windows/forum/windows_7-hardware/findfile-failed-the-realtek-netw...

    I tried pluggin ethernet cable when installing the driver also but no result

    You are the very welcome.

    If you have not installed c of the first Intel chipset driver and restart.

    https://Downloadcenter.Intel.com/Detail_Desc.aspx?AGR=Y&ProdId=816&DwnldID=20775&keyword=chipset+installation+utility&lang=eng

    Then, I would try the driver directly from Realtek on the link below.

    You want to download and install the second driver file on the list.

    http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=13&pfid=5&level=5&Conn=4&DownTypeID=3&GETDOWN=false

  • All-in-One 120-1026: Ethernet controller, network controller, PCI Device. "No driver found".


    Hello:

    You need these drivers in the order that you have posted descriptions...

    This package provides the driver for Ralink Wireless LAN Card solutions in the supported models that are running a supported operating system.

    File name: sp58084.exe

    This package provides the original driver for Realtek PCIe family network controller solutions in the supported models that are running a supported operating system.

    File name: sp54416.exe

    This package provides the original for solutions Realtek PCIE Card Reader driver in the supported models that are running a supported operating system.

    File name: sp57283.exe

  • p6608f: driver Realtek PCIe GBE Family Controller required

    I recently updated my HP p6608f for Windows 10 desktop computer.  I have a few question that report in the adapter Ethernet.  In Device Manager, it is identified as Realtek PCIe GBE Family Controller.  I would like to download the latest driver for it.

    HP does not support my computer for Windows 10 so I'd go to Realtek driver.

    http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=13&pfid=5&level=5&Conn=4&DownTy...

    On the Realtek site, they list the identifiers for the controller, for example, RTLxxxxx.  How can I find out what mine controller is if I can get the correct driver?  I will mention that on another computer, I also have a Realtek PCIe GBE Family Controller and there pilot v. 10.1.505.2015 who seems different from what is displayed on the Realtek site.

    Hello:

    You must use the driver installation auto W10 this set of ethernet controllers, as indicated in the specifications of the motherboard of your PC comes with the Realtek RTL8111DL ethernet 10/100/1000 Mbps adapter.

    You can see this map at the top of the Web page... RTL8111C/RTL8111CP/RTL8111D (L)

    http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=13&pfid=5&level=5&Conn=4&DownTypeID=3&GETDOWN=false

  • G6-1c58dx lost the drivers for the controller, ethernet, network controller, pci device and sm bus controller

    My hard drive died so I replaced it with an SSD.  Re-installed windows 7 Home 64 and he see fine windows, however there no connection network or the internet.  I downloaded the drivers from HP for the 1c58dx, but they won't install it.  I need to find the drivers for the following items:

    Ethernet controller: PCI\VEN_10EC & DEV_8136 & SUBSYS_169B103C & REV_05\4 & 3055DD30 & 0 & 0020

    network controller: PCI\VEN_1814 & DEV_5390 & SUBSYS_1636103C & REV_00\4 & 341BB839 & 0 & 00A 9

    PCI device: PCI\VEN_10EC & DEV_5209 & SUBSYS_169B103C & REV_01\4 & 2A8AB03B & 0 & 00AA

    SM bus controller: PCI\VEN_1022 & DEV_780B & SUBSYS_169B103C & REV_13\3 & 2411E6FE & 1 & A0

    Thanks in advance for any direction provided.

    Hello:

    First install the AMD Chipset drivers and reboot.  You want the first file on the Web page.

    http://support.AMD.com/en-us/download/chipset?OS=Windows%207%20-%2064

    Ethernet controller:

    http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-100084-1&cc=us&DLC=en&LC=en&OS=4063&product=5193779&sw_lang=

    network controller:

    http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-111781-1&cc=us&DLC=en&LC=en&OS=4063&product=5193779&sw_lang=

    PCI device:

    http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-100083-1&cc=us&DLC=en&LC=en&OS=4063&product=5193779&sw_lang=

  • Where can I get the driver for Realtek PCIe GBE Family Controller free?

    Hello world! I want to know where I can find the drivers for the Realtek PCIe GBE Family Controller

    My controller drivers ethernet is absent and that's that. I found it in the networks but they are paying and I can't the aford it. Can of 1 help?
     
    Original title: Realtek PCIe GBE Family Controller

    You don't have to pay anyone. Realtek release them for free...

    http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=13&pfid=5&level=5&Conn=4&DownTypeID=3&GETDOWN=false

  • Realtek PCIe Gbe family controller works only with Code 12: this device cannot find enough free resources that it can use.

    Original title: Realtek PCIe Gbe family controller does not work

    so I can't access my internet so I use my phone... because ot said a (code 12). and "this device cannot fing enough free resources that it can use." and I don't know what I can and can not turn off so that it works... I also believe that he has stopped working after I said would be a windows update in June... someone help... ITA has windows 7. the model is a center of thinking lenova

    Lori

    I go to the Lenova support website and download and reinstall network controller (Realtek PCIe Gbe) drivers for you computer model.

    http://support.Lenovo.com/en_US/downloads/default.page?selector=expand

  • Windows 8 pro and windows 8.1 pro 64 bit drivers ralink rt3290 and lan realtek PCIe FE Family Controller

    Hello

    I have a HP Pavilion GP A10 AMD laptop 2313-AX. The latest drivers from the HP website for windows 8 pro and windows 8.1 pro 64-bit drivers ralink rt3290 and lan realtek PCIe FE Family Controller appear limited in my laptop, but in the same laptop connectivity when I start in Windows Server 2008 R2, both LAN and wifi works very well.

    Are there drivers available updated 2013 for these two hardware devices as dated?

    Are there universal or generic drivers that can act as a workaround?

    If so, please give me the URL for the same thing.

    Kind regards
    Sriram.

    Hi Steve,.

    I came across similar issues where the driver manually enabled users to solve the problem. Uninstall the current network adapter drivers and manually install drivers that you previously downloaded.

    a. press Windows key + R key, type devmgmt.msc, hit the Enter key to open the Device Manager.

    b. expand network adapters, right-click on the listed network adapter and select Update driver software.

    c. click Browse my computer for driver software, click Let me pick from a list of drivers for devices on my computerand then click on disk.

    d. in the dialog box to install from the disc, click Browse, locate the drivers, and then click Open.

    e. follow the steps described in the DeviceName update driver software dialog box to update the driver.

    Try these steps and let us know the results.

  • Realtek PCIe GBE controller family issue. Code 31

    I just did an upgrade to windows 8 last night, and well, things seem to work except that I see now that my realtek PCIe GBE Family Controller is a warning symbol yellow when you view Device Manager. When I went to update the drivers it installed and then said that there was a problem updating the drivers and gave error code 31. Properties says drivers cannot be loaded and gives the same error code 31. Do not know what is this controller, but I can't seem to make it work properly. Any thoughts? Do not know why, after upgrading to windows 8 I would have this problem from the start. Also, Action Center identified a problem of communication with the modem and suggested I it reboot but I had no other problems with other devices in the House. any help is appreciated.

    OK guys! Super easy solution, not as difficult as you think. I recommend to do two things at the same time as I did, but one of them (or both) has been the appropriate fix. I just do them at the same time.

    1 start, all programs, accessories, System Tools, cleaning, (c) disc for me, the main drive I guess, I'm not a genius with computers by all means so that this should give you more hope. I just clicked on the temporary files, Recycle Bin, things that seemed undesirable memory unnecessarily, but I left just in case one system error logs to check the report
    2. I went to the control panel configuration, programs, and UNINSTALL THE LAST JAVA UPDATE, I remember that it was after this java update one night that I couldn't go online the next time (one or two nights after)

    That's all! I rebooted and VOILA! No kidding, I have once again to the Internet!

    FYE: Yes I tried the system restore, reconnected connection ethernet and power cord and a few other things I've read online. BUT IT WORKS! Apparently there was a corrupt file that I deleted during disk clean up or just uninstalled an bad Java update that turns off / disrupted the communication of my computer and its device drivers.

    Anyway, give it a try!

  • Pavilion g6 - 1185st: controller driver Realtek PCIe family

    PCI\VEN_10EC & DEV_8136 & SUBSYS_1670103C & REV_05

    Need Realtek PCIe Controller Family driver real.

    My SYSTEMS Windows 10 x 64

    I have 9.1.401.2015

    Hello:

    Try the driver directly from Realtek.

    a 2nd on the list.

    http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1 & PNid = 14 & PFid = 7 & Level = 5 & Conn = 4 & DownTypeID = 3 & getdown = false

Maybe you are looking for