network Windows 7 problem
The problem is with a computer windows 7, which worked fine until the last update (windows Defender definition) February 3, 2014. looks of stack network OK open cmd and ipconfig and ping the router correctly. Be able to see the configuration page of the router in IE11 and Firefox, however not able to see Web pages. Verified the remote desktop and can display the server's desktop. Outlook cannot see the mail server. Turn Windows defender, windows firewall and the antivirus firewall. have manual reset for ip and DNS tcpip however no change have used netsh reset in a cmd window tried to do a system restore but it fails. the problem must be with the software were used starting in minimal mode and safe mode with networking with the same result.
Entered in the static ip address for a remote server and received a correct notification (you are not authorized to view this page) running options
Hi Anil
The computer of windows 7 is one of the 8 on a network with a windows 2008 Server. All computers bar you can see the internet. The router status page indicates that it works correctly. I can RDP into the server from a remote location. The tcpip and DNS for the computer with the problem have been working with the network card, no problem device is present in System Manager. I can't do a ping of the defective computer to all others on the network. In line at the seven layers of the OSI physical and software layers work properly, looks like it's fire to the walls of IE11 and Outlook. Checking that all firewalls is turned off. System Restore starts and fails them.
Have now resolved the issue. The last update to the computer was an update definitions for windows defender. I removed the update in safe mode with network and was able to do a system restore to the day before the problem. Windows defender is turned off and has been for many months, but this late update to the walls of the system software.
Thank you
concerning
Tags: Windows
Similar Questions
-
Problems connecting to the wireless network windows media
After having installed AT & T u verse, the installer said I have to use the code of encryption key for the modem/router to connect to wireless network windows media, so I can watch TV. Windows Media repeat myself that it's the wrong key code. I checked the number again once and he's right. Any help?
Hello
I suggest you to visit these links and check if it helps:
http://Windows.Microsoft.com/en-us/Windows-Vista/watch-TV-in-Windows-Media-Center
It will be useful.
-
I had connected two windows server 2003 sp2 as Server1 and Server2 via a vpn
Thanks to the internet.
Each server also has a network of LAN.
problem is when vpn is connected between two servers that LAN is disconnected. client systems cannot connect to the server via the lan.
area of the systems windows xp or windows 7 cannot access its main server. How to solve this problem?Post in the Windows Server Forums:
http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer/ -
Windows 7 - problem 'says that my laptop was inconsistent.
Original title: Windows 7 problem.
At this moment, I have problems with Microsoft. A message to see if my laptop was ready for Windows 7. When I tried another message came to say that my laptop was inconsistent and that I should check my internet and try again later. My internet is OK. Please help me, I'm missing out on a lot.
Hello
Start the computer in safe mode with network, run Windows 7 Upgrade Advisor and check the status of the issue.
To start the computer in safe mode with network.
Please let us know if you need more assistance.
-
Removal of the PC on the network window
Well I was looking through my network connections and noticed that my friends (enter name here) - PC had been added to my shairing network window and I tried many things and unfortunately there isn't a delete option. How can I go to take the PC out of my connections to the network?
Try this:
Go to control panel > Classic view > Network and Sharing Center > customize > merge or delete network location > highlight the network, and then click on remove.
I hope this helps.
Good luck!
Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
-
CAN´t find other computers on the home network Windows.
I have a home network windows already defined with two desktop with Windows XP and a laptop with Windows 2000. The computers are connected to a router with ethernet cables and the lap top wireless (WiFi) to the same router. Now, I'm trying to connect a fourth computer (a desk top) with Windows Vista. It works fine to connect to Internet, but I can't reach the other computers on the network. On other computers, I can see a 'new', but I don't see the others of a "new". Can someone help me with the configuration of the computer "Vista"? Thanks in advance. / Thomas
Hello
To home network computers running different versions of Windows, we need to make sure that what follows.
a. ensure that all computers are in the same workgroup.
(b) the value of the private network location type.
c. open ports in your firewall to allow file and printer sharing.
d. turn on additional file and printer sharing options.
e. consider using password protected sharing.
5 using the network card.
The NIC in the network and sharing Center is a graphical view of the computers and devices on your network, showing how they are connected and including problem areas. A computer running Windows XP can be detected and appear on the network map, you may need to install the Protocol Link-Layer Topology Discovery (LLTD) on this computer.
To install LLTD, visit the following link and download: http://support.microsoft.com/kb/922120
For more information on the "networking running different versions of Windows' computers, visit the following link:
http://Windows.Microsoft.com/en-us/Windows-Vista/Networking-home-computers-running-different-versions-of-Windows
I hope this helps.
Kind regards
Syed V
Answers from Microsoft supports the engineer. -
Reader network Windows media services setting keep happen to automatic (delayed) sharing
Hi Im having problems with Windows Media Player 11.
I noticed the drive share network windows media services setting the parameters of the service, has been set to automatic (delayed). I changed it to automatic only so I can stream video files to my Xbox 360. Go to the oprtions streaming in wmp and turn on allow streaming media. It works fine but only for a few minutes, then the service settings changes itself to automatic (delayed). This keeps happens whenever I change, the Dungeon settings changing to automatic (delayed).
I hope you can help,
Kind regards
Gary.
Hello
I suggest you to check the link for the error 1053 and check if it helps:
FIX: You receive an "error 1053: the service has failed to demand launch or control in a timely" error message when you stop or pause a managed Windows service
http://support.Microsoft.com/kb/839174
I suggest you also for the link and run the Microsoft Fix it:
Solve the problems of Windows Media Player video and other media or library
http://support.Microsoft.com/mats/windows_media_player_diagnostic
-
Satellite A135-S4527 - Windows encountered problem & fails to load
At startup, Windows attempts to load, but I get the message Windows encountered problem communicating with a device. Windows does not load.
Tried all attempts for load in SafeMode etc but no luck. Tried to load the Toshiba Recovery utility but still no luck.Fortunately the data is saved, but I have no recovery disks.
How can I get the recovery disc for this machine for delivery here in the United Kingdom when it is a product of the USA?
If the recovery discs can be ordered in the United States where to order? (I have an address to the United States for delivery if necessary).Hello
As far as I know here in Europe, you will not be able to recovery media order for the laptop models to the United States. If you have a person in the United States, they must contact the nearest authorized service provider and order it for you. Later they send it to you.
If you need to address and http://www.csd.toshiba.com/cgi-bin/tais/support/jsp/home.jsp?nav=Repair&sn=false check phone numbers
Good bye
-
p6310f: Windows Update problem
When you try to upgrade to windows 10 I received the error message 0 x 80080005 - 0 x 90016 after watching in Microsoft support forum, I found that the problem was related to windows 7 is not not to date. I checked and found that my computer has stopped udating a couple of years. I tried to run Fixit MS that has not worked. Tried to reboot (BITS) and got ERROR 126 (module not found) I then followed the instructions at https://support.microsoft.com/en-us/kb/2700567 on how to reset the Windows Update components. During the process, I have the following errors:
Mshtml.DLL loaded, but the dllregisterserver entry point was not found.
Shdocvw.dll "" ""
browseui.dll " " " "
MSXML.dll Module could not load make sure that binary is stored at the specified location the specified module could not be found.
Actprxy.dll Failed is not found
gpkcsp.dll " " " "
initpki.dll " " "
wuaueng1.dll"" "
c:\windows\system32\dllcache\wucltui.dll"" "
wuweb.dll " " " "
muweb.dll " " " "
I guess my question is what I have to do a restore of the system under windows 7, before I can upgrade to windows 10? Or y at - it another way?
Hello glockrow ;
Let me welcome you on the HP forums!
I read your post about windows update problems and wanted to help.
I would that be able to say that updating to Win10 was an exact science where we know exactly how he does it, and what it should - but the flooding of this and other instances of Win10 problem after that problem indicates that, at best, we are all guessing.So, I think, from what I've read and done on my PC, is that you SHOULD be able to avoid the problem of missing updates by updating using Win10 created using this MS link media: 10 Windows Installer using the media - Windows help authoring tool
After you create the DVD or USB, NOT boot from it. Instead, insert it into your PC and, if it does not auto-start, right click on the file setup.exe and run it.
HOWEVER - and this is important - PC Win7 have a rate low success updated Win10 without problem - primariluy lack of OEM Win10 drivers. Typical problems include display artifacts (to cause to be obliged to use the driver for the card of Microsoft Basic), not wireless and touchpad problems. The drivers Microsoft provides have only the most basic features, with none of the extras that the HP drivers bring to the stage.
It is further complicated by the function Win10 GoBack, whereby you can return to your original operating system, being known to be unreliable. So when your upgrade machine malfunctioning, only then you discover that you cannot return the machine to work, that you had originally!
You can protect yourself against ending up with a damaged machine - seriously considering using a free third-party product that works for airport Imaging/restoration - Macrium Reflect.
Macrium reflect (MR) provides a FREE version that can be used to image and restore partitions or drives together.
What I recommend is the following:
(1) download and install Macrium reflect (MR)
(2) run M. and choose the option: "Create an image of the partition (s) required to backup and restore Windows" to write a full backup to an external drive or USB key
(3) use the option to create a CD or a USB startup key
NOW, you have the means to restore a full system that works for the external hard drive or USB key in a few minutes.
So now you can recharge before with the upgrade, knowing that whatever happens, you will be able to return to your currently works in a few minutes.
Good luckI'm a volunteer and I do not work for, or represent, HP.
========================================================================
If you feel that my suggestions helped you, please click on the thumbs-up symbol to say thank you!
If they helped to solve your problem, please click 'Accept as Solution' to help others find similar information. -
Error Windows Update problem "don't shut down your computer updates being configured"
OT: Windows Update problem.
Why should I continue to get the message ' don't shut down your computer updates being configured "where all the updates seem to have been installed?
Start here (ignore the title): http://support.microsoft.com/kb/949358
-
KB2676562 error 80070490 Windows update problem
original title: Windows Update problem
I'm unable to install the "Security Update for Windows Vista (KB2676562)." I get the error "80070490." I tried everything, including the "fix for Windows (KB947821)" and "Automatic troubleshooting" that incorrectly shows that the problem has been corrected.
I'm unable to install the "Security Update for Windows Vista (KB2676562)." I get the error "80070490." I tried everything, including the "fix for Windows (KB947821)" and "Automatic troubleshooting" that incorrectly shows that the problem has been corrected.
Have you tried everything in this article: http://support.microsoft.com/kb/958044
Method 1: run (Checksur.exe) system update readiness tool
If this method does not resolve the problem, go to method 2.
Method 2: perform a Windows repair installation
-
Active window color problem - cannot change the background color
original title: Active window color problem
By right-clicking: Desktop, then click on: personalization / window color and appearance / settings (Advanced) appearance, Windows user can assign a background color of the active window in any application. This is useful for those of us who don't want a stark white screen; We can assign a mild pastel tint which may be easier on the eyes for long term sessions.
At some recent point, I lost the background color of the active window within Windows uses 'household. I still not my background color assigned in any application I run (Word, Mail, etc.), but using Windows Explorer to navigate through my hard drive, the active window is now always the default stark white Windows. How this change and can it be forced to adhere to the assigned active window background color?
Hello
Step 1: Check if the problem continues in a new user account.
http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-a-user-account
Step 2: If the problem does not persist in a new user account, then the old profile could have been corrupted. Try the following article to fix a corrupted user profile.
http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile
-
When I try to use the Skype window having problem
When I try to use the Skype window having problem
Hello
you don't say what problem?
and if the problem only occurs when using Skype, ask the Support of Skype
-
Pavilion 15-ab063tx: 15-ab063tx Pavilion network controller driver problem
Hello
I just bought a new 15-ab063tx Pavilion and after format, I have a wireless network connection problem. For the network local network it works well but I can't find the wireless network adapter. On the device he received the error this network controller driver problem. Can someone help me.
Realtek Wireless:
Bluetooth:
-
Windows Update problem - 0 * 80070005
* Original title: windows update problem
I'm not get windows updates.so I run the program update troubleshooter.in windows he showed the error of update problem as... windows 0 * 80070005 (2016_05_17_T_06_03_42P) .and this problem was not fixed. and again, I have no answer answer.pl.
First of all
KB3138612 would be the last for a manual installation
The first would actually KB3145739
Homepage for all versions,
https://TechNet.Microsoft.com/library/security/MS16-039
After that you manually install you KB3153199
I would also like to before doing this,
Be sure and go to uninstall a program and see which Microsoft Net framework you have installed.
4.5.2 is more consistent to have installed,
https://www.Microsoft.com/en-US/Download/details.aspx?ID=42642
Maybe you are looking for
-
HelloI had TB for several years. I also have a gmail account. They the emails that I get Gmail, I want to be able to download, store and continue to work, using TB. Have been using IMAP before, but now will shake not TB gmailen more. Direct I can of
-
for a few weeks or so, whenever I connect to firefox, my home page does not open, and my address bar remains empty. in fact the only time where something appears in my address bar is when I manually type it in., I have also the status of loading Web
-
There in the context of Teststand a bit which indicates if the breaktpoint has been?
-
Unable to configure the address IP 8184 PXI
Hello I can not configure the IP address of a PXI 1031 with a controller 8184. I followed all the steps in the manuals to help but after that assignment of an IP address, when I restart the controller the following message is displayed: mounting: mou
-
my computer doesn't turn off the first time.
my computer doesn't turn off the first time I try to turn it off. This will turn off the second time I select "turn the computer off.