Network with DSL and wireless setup problem

I use two number of script and lan proxy... NW its Internet connects only via script... no more connection with lan numbaer, I checked dsl. the amount of the fine... Help, please... also

Give me some advice on, dsl, wireless configuraion in switches

Kind regards

Mohammed

Advertisement

Used Google...

http://www.Google.com/#hl=en&&SA=X&EI=gbX-TJTwBsWclgfevL29CA&SQI=2&ved=0CBMQvwUoAQ&q=DSL+, + wireless + configuration + in + switches & spell = 1 & fp = e18ec2db23988f7d

--
Gina Whipp
2010 Microsoft MVP (access)

Please post all responses on the forum where everyone can enjoy.

Tags: Windows

Similar Questions

  • Network with the MacBook Pro 15 "problems

    My new MacBook Pro (15-inch, mid-2015 retina) has 16 GB memory MHz DDR3.

    2.8 GHz Intel Core I & and an AMD Radeon R9 M370x PCie, in addition to an integrated

    Chipset Intel Iros Pro model. I am running OS X El Carolina Version 10.11.6, with 12 Parallels and Windows 7 for a few

    the company's programs, but I mainly work on the Mac side.

    An intermittent connection problem became constant after a week of using the computer.  My router DLink DSL (model 2750B) is two feet away from the computer.  In the system preferences / iCloud, I get "There was an error connecting to server Apple ID" my MacPro, iPad Samsung Galaxy S7 and Air 2 all connect with the same router wireless without any problem. (All my OTHER computers connected also with the same Apple ID and password without problem.  IMac 2012, MacPro, 2012 MacBook Pro, iPad 2 and the new iPad 2 Air)) I have a screenshot of the error message "None of your preferred networks are available" and in the same time to a list of all available networks, including my own.  Several times, I click on my network and get the response "the xxxxxxnetwork could not be contacted."

    I solved problem with Verizon, my provider, yesterday, and the routine test found that I have an intense tone, but the computer could not complete the test routine.  I ran "Diagnoses" several times this evening - this is after 23:00, and the report suggests that I will review wi - if recommended (fact), that I have a crowded WiFi channel (almost anyone else is in the building at this late hour) and I have to reboot the router (I did several times) and that maybe I should join a Wi - Fi network network that is associated with the Internet (like mine that works for all other devices.)

    Any suggestions on how to solve problems, or I would return the computer.  It's beautiful, and I spent a lot of time updating, installation, customization, before this stop of a Wi - Fi.  I had to buy a new router, but tests with Verizon made me doubt that a new router would solve this problem.

    Thanks for all the wisdom and strategies.  Maggie2012

    Hello maggie2012,

    Thank you for using communities of Apple Support.

    I understand your message that you are not able to connect your new MacBook Pro to your home Wi - Fi network. You did some great troubleshooting so far! I also recommend you to test the issue in Safe Mode and in an another user account on your Mac. The following articles will provide you with the steps necessary to test the problem in Mode safe and in another user account:

    Safe mode

    How to test a question in another user on your Mac account

    Best regards

  • HP 6830 can be configured to print with USB and wireless?

    a provide you with similar instructions to put in place the USB and use wireless to my hp 6830 on an iMAC running on OS X Yosemite 10.10.5?

    Hey @kj6311,

    Welcome to the Forums of HP Support!

    I see that you want to install your HP Officejet Pro 6830 e-all-in-one printer via a USB cable connection and the connection Wireless on your computer Mac OS X 10.10. I want to help you with this today. Can I please you follow the steps below.

    Step 1: Set up the device:

    To begin, we will set up and install the version without wire of your printer.

    1. On the front panel of your printer, swipe, and then select Network Configuration
    2. Select the wireless settings
    3. Make sure that Wireless is enabled
    4. Then choose Wireless Setup Wizard
    5. Select your network name (SSID)
    6. Enter your wireless password. Is case-sensitive.
    7. Once the wireless connection has been configured on your printer successfully, proceed to the next step.

    Step 2: Install the wireless device:

    1. Please click here to download the latest driver for Mac OS X 10.10 for your printer
    2. Run the network installation
    3. Once the wireless installation completed successfully please try wireless printing to confirm that your printer works via the wireless connection. Once tested, please proceed to the next step.

    Step 3: Install the USB device:

    Please connect the USB cable from your printer to the computer.

    1. click on the menu of Apple , then Preferences System.

    2. click on Print & Scan and then check if the name of your printer appears in the printer list.

    3. click on the plus sign (), click Add a printer or a Scanner, click the name of your printer.

    4. click on the area of use or with the help of Print and then select the name of your printer on the shortcut menu. Ensure that the Officejet driver is selected.

    5. in the 'name' section, add USB until the end of your name of the printer so that you can make the difference between the two Officejets.

    6. click Add to add the printer to the list.

    Now you should have two copies of your printer showing under Print & Scan. Please let me know if the steps to solve your problem. Good luck!

  • Wireless Setup problems

    I have been using my p1102w with the usb connection, but due to the reorganization of the House I would like to configure the wireless. I went to start and programs and click Wireless Setup. When it asks me to choose my SSID, I select it. It gives me an error "the printer could not communicate with any router or with the given SSID access point" or something of that nature. I made sure that the wireless button has been pushed on the printer, so it was blinking. IM at a loss to know what to do now. Thank you.  My model is CE651.

    For the readers of the forum of the future, I solved my problem by changing the name of my network to something without spaces. For example, instead of "fluffy dog" is now "fluffydog". After that the installation program immediately recognized my SSID.

  • Satellite L35 (US) with Atheros AR5005G wireless connection problems

    I have a Toshiba L35 (Windows Media Center Operating System) with the software WiFi Atheros AR5005G. This machine was purchased in the United States.

    While in the United States the Wi - FI connection to a router (Linksys) using Windows to configure was instant without any problem.

    I am now in England and when I try to connect to a Modem/Router (3 com), use Windows to configure, connection is spasmodic with what makes a connection on every five attempts. Several times I have to use the repair connection device trying to connect. When it connects the connection is good. When you use the repair it shows unable to renew your IP address if it connects. On other occasions, I use the network connection Panel and 'disable' then 'activate' then most guarantees a connection.

    The laptop provides instant connection when you use a card PCMCIA WiFi with Windows to configure. While the card is inserted the s computer WiFi connect instant however when the card is removed and the computer restarted the same problems occur for a computer, free WiFi!

    Other laptops have no problems to connect to my Modem/Router. I am convinced that it is working properly.

    All regional/language settings in the control panel have been updated with the United Kingdom.

    No undates are available for the Atheros Driver or BIOS.

    Anyone can help identify the problem/possible settings to change?

    Hello

    Satellite L35 is a portable American designed for the American market. BIOS and drivers should be downloaded from the Toshiba site we and not on Toshiba Europe site.

    However, the error message Impossible to renew your IP address is known to me and my brother had the same problem with the Intel card. I just updated the WLan driver and used the Intel Proset utility for WLan configuration.

    I see that you have the Atheros card. The Atheros also provide an Atheros WLan client utility. Try to use instead of the clean Windows configuration.
    In addition, place check WLan card properties. You will find energy saving option. Please turn it off and check the Advanced tab

  • Since the installation of Mac Mavericks all my friends with Macs and I have problems with the cursor disappears, that in Firefox, Safari is very good...

    I stopped using Firefox as nothing I've done has corrected this problem. I tried to close Firefox and restart it, I erased all my Add-ons and then added adblock back (it's the only one), but it still does not work. I deleted files so that I have more space - I can't think of anything that works. I talked to four of my friends with Macs and they are all having the same problem with Firefox since the Mavericks.

    Cursor disappears huh? It's quite strange. All of the compatibility of the Mavericks can be followed in [Bug 883824]

    Try this work around:

    1. Go to Firefox > Preferences > advanced > general
    2. Always check "use the cursor keys to navigate through the pages.
    3. Press OK.

    Or try the Mac preferences noted here: https://discussions.apple.com/message/23542890#24471966

  • Displays HP 4625 and Windows8 / setup problem

    I have installed my hp 4625 wireless all-in-one on my Win8 llaptop. The shortcut of installer created on my desktop, but every time I press the shortcut, it is trying to re - install the hp4625 instead of open service program. same behavior when I run the program from the WIn8 tile interface.

    I have install the hp4625 on my other laptop with Win7 and everything works fine as expected.

    How do I solve my Win8 installation?

    Hello

    Try fllowing below steps and then add the printer and check for the difference:

    http://support.HP.com/us-en/document/c03659948

    Shlomi

  • Put in page works with IE and Firefox, different problems with the iPhone and Blackberry

    I created a website using DW CS4 www.hollisterairshow.com . When using my PC WinXp/IE and Firefox without problems occur in the page layout. However, I have a couple of users who have reported problems when you view the web site by using their smartphones.

    An iPhone user said the second line of the section containing the flag / date / flag is not centered, but left-aligned, everything is fine.

    A Blackberry user indicates the second line of the topic is properly aligned, but the menu bar that must appear on the left is missing!

    I don't have an iPhone or Blackberry, is it possible that I can test this using my PC? Does anyone have an idea what could be causing these issues?

    Thank you

    Tony

    I agree with the previous poster here.  I think that the best response to this is to create a separate site for mobile users, which is called case of detection.  It will be thought to create a site that is optimal in both environments.

    Shane

    DomainShane

  • Interface CC with Lightroom and Photoshop CC problems

    I downloaded the trial versions of CC of Lightroom and Photoshop CC (5 days left!). I have disabled the CS6 and LR4, I already installed it on my Mac. When I try to edit in Photoshop Lightroom CC CC, it does not work. After a long while (a few minutes), I get a format error message or a message "failed to open photoshop cc." I checked the preferences of many users and tutorials Adobe blogs. He has always worked with CS6 and LR4. The Photoshop CC and LR CC function as separate applications. Can anyone help please?

    Reinstall LR and PS from the CC app.

    First LR and Ps

  • WRT160NL connection with n and USB connection problem

    Hi guys,.

    I have the Linksys WRT160NL router and I have two fundamental problems with that:

    1. I have a laptop HP with n on its wireless card connection. (it's an HP probook 4720 s). So I know that this laptop has ability. n I have the most recent driver vor he 3.1.18. The thing is that my Linksys router does not transmit sound wireless n, just g...

    What should I do to make it work with n as well?

    2. the second issue is that the USB connection is working in a very strange way. I have attached an ADATA with USB 3.0 HDD external, even. He works in 2.0.

    I have a lot of WAV files on it and when I stream to my receiver files pay with much intrerupptions, break ups. MP3 work very well.

    I don't know what to do to solve this 2 problems... Maybe someone could help me...

    Thank you

    Try changing some settings on the router wireless.

    Connect the computer to the router with the Ethernet cable. Open the router configuration page. Go to the wireless tab and the manual value configuration view. Change the channel to 11 wireless. Make sure that the network is set to mixed. Save the settings.

    Go to wireless security sub tab and change the wireless WPA2 with AES security mode. Save the settings.

    Click the tab under advanced wireless settings change the tag to 75 interval, RTS threshold and fragmentation to 2304. Save the settings. Now try to connect to the network again.

  • Network with the new Vostro 410 problem

    I just got a new Dell Vostro 410, running XP Pro, to replace a 2400 Dimension 5 - years, which had been connected to my DSL ATT line via ethernet through a 2Wire 1800 HG. My laptop and two other offices (which is the replaced 2400) is connected through wireless cards or adapters. Three wireless computers came online immediately, get internet access and work very well.  All computers are running XP.

    The problem is that I can't access the Vostro or its USB printers through computers connected wirelessly that could print previously via the cable 2400. They do not appear and are accessible on the Vostro and the Vostro appears in the Working Group, but not belong to network on the other three.

    I tried to redo the Network Wizard, but I'm having no luck at all.

    Any suggestions would be greatly appreciated.

    Ron

    Message edited by RS2 on 09/23/2008 11:55

  • Satellite A300 and wireless connection problems

    Recently, I had to use my recovery disk and restored my laptop to factory settings. Almost everything is back is the way has been, except for a small problem.

    The WiFi does not work. It is on, but when I go to connect to the wireless family network, it tells me to insert a cable.

    My laptop is the Satellite A300 - model psagca.

    I install the drivers of Realtech and still not get the case.

    Thank you in advance.

    Your wireless network is not visible to your laptop satellite?

  • 4620 Wireless Setup problems

    Having problems connecting to the router HP 4620.  Using a new Apple Airport Extreme.  Move the flashing blue light on the printer.  Anyone?

    You should have a really easy option here to connect the printer to your network. If you are installing the printer via the USB port, there should be a way to activate the wireless configuration wizard which should convert the machine during a wired to a wireless USB connection. Let me know if it works for you and I'll be back just for you!

    -Spencer

    PS I hope you have a wonderful week!

  • iPhone5 with Officejet 655 wireless printing problem has

    IPhone 5 won't print wirelessly on Officehet 6500 a. done before, but since the update will not be

    Hello

    Sorry to hear that you are experiencing printing problems.

    You use the functions AirPrint and ePrint? The phone is able to see the printer?

    Things to check would be that the printer and the telephone are always connected to the same wifi network and that there has been no wifi password.

  • Connection to the network with Vista and Windows 7 computers

    A similar question was answered before, but it's XP computers I use Vista and Windows 7.

    I have a Windows 7 computer that is part of a home network and who also has a connected printer. I want to access the printer from a Vista computer that is also on the network. When I try to connect to the Windows 7 computer, I get the error "logon failure: the user has not granted the type of logon required on this computer."

    I've seen solutions have been when the system tries to access the printer was an XP system. Can someone help me with this problem?

    Thank you

    Jim

    Hi Jim,.

    ·         Is file sharing enabled?

    ·         You have disabled password protection?

    Try to check the Advanced sharing settings in the network and sharing Center. To do this, follow these steps.

    a. click Start, Control Panel and then click network and sharing Center.

    b. now, click change advanced settings for sharing.

    c. now make sure that file and printer sharing is activated on and protected by password sharing is turned off.

    You can also see the article for more information:

    Networking of computers running different versions of Windows

    http://Windows.Microsoft.com/en-us/Windows7/networking-home-computers-running-different-versions-of-Windows

    Let us know the results.

Maybe you are looking for

  • Impossible to select iPhone icon in the upper left corner of my macbook.

    I am trying to sync my iPhone to remove the music that is unchecked in my library, but cannot select the icon at the top left to join the summary to the iPhone. IPhone icon is still visible. Is there a way to fix this?

  • RAW error record.

    Whenever I'm Raw registration. There is a "media error" Popping out. Please help me solve this problem. Thank you. ^_^

  • Can I read out the channel of AI to control ao channel?

    Hello I use a USB-6211 to acquire two voltage signals synchronized to an LVDT (ai0) and a load cell (ai1). LVDT signal and load cell already amplified and conditioned before travelling in the ADF. LVDT and scale read displacement and force on a rod h

  • Downgrade Pavilion 15-n211sa for Windows 8.1 for Windows 7 (drivers?)

    Hello world I just got Pavilion 15-n221sa, but it is installed with Windows 8.1. I need to upgrade to Windows 7 Pro. Someone at - it had no downgrading to Windows 7 Pro experience? The site of HP support for this model uses only drivers for Wireless

  • AZ-605 new incredibly slow

    I have new AZ-605-UR23 which is a really nice computer, but is incredibly slow.  I migrated to a more old Pentium 3 Windows XP set up that was lightning fast. I must say at the outset that my computer skills are minimal so feel free to correct any as


HashFlare