Network with Windows Home Server hard drive. With the new files that wouldn't be no automatic update.

Similar Questions

• Regarding my PHOTOSHOP CS5.1: I upgraded my computer, copy all the content of the hard drive to the new, and although I have disabled the software, I can't turn it on again in the new hard drive. This is an original product with a serial number.

  Regarding my PHOTOSHOP CS5.1: I upgraded my computer, copy all the content of the hard drive to the new, and although I have disabled the software, I can't turn it on again in the new hard drive. This is an original product with a serial number. How can I activate it?

  Hi Uri,

  Please click on the link below and contact the Adobe Support via chat.

  Contact the customer service

  Hope this will help you.

  Kind regards

  Hervé Khare

• C168i: unlocked from at & t, but unable to connect to the network with the new SIM card

  I brought my c168i from the USA and I can't use it in my home country. I unlocked the phone to at & t, but it connects to the local network with the new SIM in there. It shows "not available" or "no service". What is going on??

  If you look at Australia GSM worldwide site, you will see which bands are available in your area. If the bands including the phone does not match the country you are located in the phone up with will not get service. Not all bands are available in all areas. In my view, that the phone only has GSM 850/1900 GPRS. This would mean that you get only service when GSM 850 is available that I don't see 1900 in Australia.

  Mark

  Support Forums Manager

• Where and how can I reinstall the external hard drive to the new HD to the computer?

  Original title: HD crashed.

  I want to thank the person who answered my question about the HD crashed I saved all my data and window xp. My next question is, how and where can I reinstall external hard drive for the new HD to the computer? Should I send it to drive c or where? I'm not strong when it comes to computers. I know just enough to get me in trouble. Thank you.

  Hello!

  You will need to use a full copy of Windows XP.  Should be a sticker with the product key on the side of your desk or below if it is a laptop.

  Once you have this drive, you can reinstall Windows XP.  After you have installed all the software and drivers, you will be able to transfer all your data to the new HARD drive.

  If you don't have a copy of Windows XP, you can probably get a copy of the recovery from the manufacturing of computer media.  Just to provide the model and serial number and they should sent it.

• My MB died and after to put the HARD drive in the new XP machine crashes before the activation screen may appear.

  Original title: XP Pro crashes when MB died and move new HDD PC.

  My MB died and after to put the HARD drive in the new XP machine crashes before the activation screen may appear.

  I can access the HARD drive if I boot from another HARD drive (delivered with the Machine).  Windows just hangs.

  Thanks for any help...

  Hello

  If you try to boot from the hard disk on which windows was installed by using another computer and then, you will not be able to boot from it. You can try to perform a Windows XP repair install and check.

• MacBook pro work leave because of pulled and broken wire.  I took out the hard drive.  the hard drive has all my files that I wouldn't need to clear all of the other personal files?

  MacBook pro work leave because of pulled and broken wire.  I took out the hard drive.  the hard drive has all my files that I wouldn't need to clear all of the other personal files?

  It does not start to the top, screen and hardware ok except belt disconnected.

  also can I sell adapter, brand new, never used. where can I sell?

  Hi Wally, the hard disk OS X and all of your files. Get a case for your reader, and it backs up. Try OWC

  Always keep your Mac backed up on an external drive with Time Machine or utility of cloning like SuperDuperor double clone.

  Try eBay for the adapter.

• Possible to move the Pavilion DV5 hard drive to the newer model?

  Hello.

  I have a little old (but LARGE) laptop - DV5 - 1133ca (FS036UA@ABC) that has intermittent problems with the display.

  It blinks and goes sometimes totally blank.  Then I plug in an external monitor and continue to work.  A few days later, he can work or not.  Fix sometimes repositioning the screen slightly with the hinges.  I'm sure it's some sort of cable inside or something.

  In any CASE - due to time and complexity with the upgrade to a new laptop (reloading programs, etc.) and the daily use of it - I was wondering if it was possible to buy a new laptop HP OR a model slightly more recent HP Pavilion (IE. Dv6 and DV7 with a little more power) and simply swap my hard drive.

  I understand that I would have probably to update many of the drivers - but in general would that work?

  Y at - it or the particular models that I should consider to mitigate any possible problems?

  Is this a good solution?

  Thank you for your help in advance.

  Bill

  You are the very welcome, Bill;

  Enter the model number, that you are concerned about the appropriate box on the link below.

  http://h10025.www1.HP.com/ewfrf/wc/siteHome?lc=en&DLC=en&cc=us&OS=228&sw_lang=&product=top

  On the right side of the page, click the product information link, then click on the link card product.

  You may need to click another link to product specifications once.

  Now you can see the hardware, the PC is delivered with.  Everything you need to know is the processor... Intel.

• Account name My Vista "a name of the user [name] account log does not exist on Windows Home Server" is not, despite the change.

  My Windows Home Server (WHS) prefer the same name of user account on all computers that I use - for the connection and easier access to the files. So to my Vista computer, I changed my account [ancien_nom] name [name]. Vista indicates the name of the new account everywhere but the server after a while (!) stopped recognizing my account and complains about "a name of the user [name] account log does not exist on Windows Home Server" suggesting I should change the name of the account on the ESM. Since I have other computers where I can't change the name of the account (work computer), for this purpose I changed the name of the account on my Vista computer.

  The reason why the WHS could work properly at the beginning maybe I can connect to the WHS folders in a separate process by using the new account name. Choose to save the password - which might have worked for a while, but no more. I also tried to connect as a network device, but I do not correctly reconnect with the identification information data (and saved).

  1 is the name of initial account stored anywhere even if I changed and the reason why it can pop as in this case?

  2. any ideas on how to solve this problem?

  3. or is the problem only on the side WHS - then I might have to turn to a WHS forum

  http://social.Microsoft.com/forums/en-us/category/WindowsHomeServer/

  They will help you in the above Windows Home Server Forums.

  See you soon.

  Mick Murphy - Microsoft partner

• If I create an image of my windows 7 hard drive, should the new drive size match the old drive?

  I want to create a backup of my hard drive that has windows 7 on it.  Do I need a hard drive of the same size or can it be smaller?  I want to put the hard disk image is smaller but still would have enough space for all the data on my computer. Thanks for your help!

  Hello

  Welcome to the Microsoft community.

  I want to let you know that the free space on the new drive should be more than the size of the backup.

  Back up and restore: frequently asked questions: http://windows.microsoft.com/en-US/windows7/Back-up-and-restore-frequently-asked-questions

  Let us know if you need assistance with any windows problem. We will be happy to help you.

• Replace the HARD drive in the new Pavilion Elite HPE-180 t.

  I'm not a professional computer, but after 30 years of use, the upgrade and repair PC home and the office, I'm embarrassed to post this thread - but here goes.  I took delivery of a few days ago the new highest indicated HP computer model in the topic of this thread.  The new computer is beautiful and everything worked perfectly from the start.  I decided after a few days to check, everything was fine and proceeded to a few pieces of hardware to transfer from my old Dell (a fairly new 1 t WD SATA HDD on which coied got a lot of data from the former count and a new BD/DVD ROM SATA optical drive).  Everything was fine once I figured out how to get these two drives in the enclosure waterproof on the new computer, but all reconnecting the SATA cable on the main came with the computer HARD disk, I broke up some pins on the HARD drive that made it of course useless SATA port.  I of course take full responsibility and do not wish to get involved with HP technical support to replace the disc - and frankly, I prefer not to put another HDD Seagate support because I prefer a 1 t Cavier Black SATA WD which I believe is one of the most reliable RESEARCH on the market right now, and I can buy it for around $200 instead of the $400 I uknderstand fresh HP for the same size of Seagate replacement.

  Here's my question, can I just buy a new HDD WD and install it with my own final Win 7 x 64 without the HP recovery disks (they did not come with the new computer, and I had not yet created my own recovery disc).  Frankly I'd rather have a completely clean install of my Win 7 OS without the HP partition and other HP software on the HARD disk.  Is this possible or HP has some sort of identity with their software which must correspond with the BIOS or something like this?  REALLY, I don't want to return the computer to HP to get called into service because I just started a small business that involves a lot of video editing and I can't be without the computer for weeks, while HP is concerned with him (I've read the horror stories about the high cost of the repairs and the long repair time but I do not wish to keep my warranty if possible).

  HP Pavilion Elite HPE-180 t; 2.8 Ghz quad-core Intel i7 CPU; Intel x 58 chip; Win 7 64 bit ultimate OS. 12 G RAM;
  1.8 NVIDIA GeForce GTX-260 G graphics card; HP w2338h HD widescreen LCD monitor

  I have the same PC, only the model number has been changed.  Yes, you can use your own license W7 and install it on another drive or a replacement drive.  You can get the drivers from the HP site web support HPE-180 tfor your PC or other sources.

  Some software manufacturers third HP is very useful, so you might want to consider ordering the HP recovery discs and make a full recovery to factory.

• I have blown my motherboard on an old computer and hooked up my old hard drive to the new computer and want to transfer my favorites on the new drive but cannot find where they are located on the old drive - any help?

  My motherboard went bad on my old computer, but the hard drive was OK. I bought a new computer and plugged my old hard drive to it via a usb adapter. I would like to import or copy my favorites from the old hard drive to my new, but I can't find where they are. I was unable to determine the search for articles on the web. Be advised that my old hard drive is basically nothing more than a place of storage for files at this point. My old operating system is windows XP, and my new system is Windows Home Premium.

  https://support.Mozilla.com/en-us/KB/recovering+important+data+from+an+old+profile

  Your old profile is located here in Win XP and W2K:
  
  drive: \Documents and Settings\username Windows login\Application Data\Mozilla\Firefox\Profiles\profile_name

• Possible to recover files on an old hard drive using the new computer?

  Hi, my old computer CPU fried making UN usable. I just bought a custom P6150t of hp and I was wondering if there is some way I can install the old Hard drive in the computer I just bought. I really want to stay away from the team of geek or something that's going to cost me a lot of money. Any suggestions?

  It is certainly possible, in fact, it should be fairly simple how experienced you are with computers. Hand, you have a few options I can think. Was of course since I am not aware of what kind of hard drive in your old computer, you will probably need to buy an additional cable\cord\connector to connect to the motherboard, and if it is an old IDE drive, you can buy an IDE to SATA as one of them.

  This is all assuming you want to keep the hard drive installed on the PC. And although it may sound intimidating or difficult to do, it's really not! If you can put some screws with a screwdriver, you will be able to install the old drive if your new PC. Simply enter the model number of your PC to the HP drivers & support web page or click on the following link: upgrade and repair, (this is for the model number you provided) read the first couple pages & then proceed to PDF page #17. Read & review the instructions once in a relationship, print out the instructions if necessary, collect tools (flat head screwdriver & anti-static bracelet), then just follow instructions & take your time paying attention to the illustrations. It is frankly less work & easier than typing all of this out.

  Either way, you can easily connect to your computer must use one of these: existingUSB-adapters IDE that allows you to directly access a device of ATA/ATAPI IDE interface. Everything is a matter of preference and what you are comfortable doing.  To find these items I already mentioned, just google 'em and either find a computer store nearby and investigate with them or order from a decent distributor in your country for the best prices. Overall, there are many more options that I've listed here, but they are all relatively will do the same thing; that is the type of player, you must convert a USB cord. Hope this helps! Good luck!! -tmt-

  Message edited by tmt on 14/08/2009 05:04

• action with the new file with the size of the selection

  Hello

  I try to record an action that takes a copy of the image and creates a new file with the same dimensions. The action record always have the size of the file of the new hardcoded image inside. I tried to put the Preset in the Clipboard, but this is not recorded in the action. It is with the CS3 version.

  How can I create a new file that takes into account the size of the image?

  Thanks for your help,

  Daniel

  You can save the menu 'Image-duplicate"to make a copy of the entire image without registration of the size. If the doc doesn't have only one layer, you can also save the context menu in the layer panel to duplicate the layer to a new document. The size is not saved.

• Could not map the drive from external hard drive to the new computer laptop with windows 7-64 bit

  I just got a new laptop with windows 7-64 bit.  When I try to map a drive on my external hard drive, it tries to connect but then returns the message "the network path was not found" I even tried to use the ip address.  The external drive is turned on and I can be mapped to other computers in my house.  When I click on browse in the drive, network adapter, and then click the network folder window, I see that what's on my pc.

  Hi katnoir,

  Follow the steps described in the links:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/Windows-7-network-error-code-0x80070035-Windows/84791143-B70a-4EC2-B700-98df657fe45c

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-networking/Windows-logon-unsuccessful-during-map-network/055d61a5-00d0-4798-9e98-66e6ba0726de

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/ErrorCode-0x80070035-the-network-path-cannot-be/d2debc9c-afbb-497c-A0D8-a3e4e0137061

• ESXi with Windows Server 2008 Vm for the new product that has power...

  I'm creating a new product with the host operating system being ESXi and several virtual machines, including two Windows Server 2008 SMV.  This product has power cuts regular and virtual Windows machine doesn't start up without intervention from the console.  Can I configure ESXi or the Windows virtual machine to manage power cuts?

  Any suggestions?

  Yes, if you want to manage power failures on the way down (off), you will need an inverter with a kind of function of network downtime.  I use rackmount APC inverters with their client to stop network installed on each virtual machine.  He takes care to stop the virtual machines.

  Since I use the free version of ESX, I can not install the linux version of the network on ESX, so stop util...

  on a stand-alone computer (mine is XP) with the client software of network downtime.  install the tool of network downtime and the vCLI, then write a script of vCLI commands to stop the host.  Stop network client software running the batch to the stop, then stop the machine independent and all its free.