Networking Intra FI

Similar Questions

• Issue networks intra VPN

  
  

  First of all, it seems to me that if your DSL modem is a router, also. You run two routers to a string. This isn't really a good idea. He usually makes things more complicated.

  I would say one of these two options in this case:

  1. turn the mode DSL modem. In this mode, it functions as a normal modem, i.e. This disables the router to the DSL modem. Then configure the WRT to connect to your ISP (probably via PPPoE for which you need the user name and password).

  2. let the ADSL modem in router mode. Use the WRT as an access point. Basically, turn on the WRT DHCP server and connect it to a LAN port instead of the internet port. Assign the WRT an IP address in your router DSL, LAN, for example 192.168.0.2, but make sure that the DSL modem is not using this IP address

  I would recommend 1.

  In addition, the network LAN IP on both sides must be different. If your desktop is running 192.168.1.0/255.255.255.0 you cannot run your LAN on the same network. Routing would be impossible because the computer cannot determine if an address 192.168.1.100 belongs to your network or connected network.

• Enabling multicast on the inside of transparent mode network

  ASA is in transparent mode (5512-X/9.1 (5))

  Inside network is 10.1.0.0/24. Router 10.1.0.1 is on the external interface.

  Syslog message: Deny UDP incoming from 10.1.0.103/5353 to 224.0.0.251/5353 on the interface inside

  I have ASA configured with access lists in the transition from outside to inside, but none of the lists of access from inside to outside, because I want to allow all traffic inside out.

  I believe in routed mode that I would permit same-security-traffic intra-interface. How can I get all of this in a transparent mode with out having an inside to outside access list?

  Config:

  access-list extended outside_in permitted tcp any4 host 10.1.0.46 object-group WEBSERVER_SERVICES journal of notifications
  outside_in list extended access permitted tcp any4 any4 object-group VCENTER
  outside_in list extended access permitted tcp any4 any4 object-group VSPHERE inactive
  outside_in list extended access permitted tcp any4 any4 eq journal of notifications
  outside_in list extended access permitted tcp any4 any4 object-group RDP
  access-list extended outside_in permit udp host 10.1.0.1 host 10.1.0.54 eq syslog
  outside_in list extended access permitted udp object-group PULSE sip host 10.1.0.15 eq eq sip log notifications
  outside_in list extended access allowed icmp host 10.1.0.1 any4 object-group ICMP log notifications

  Access-group outside_in in external interface

  You can apply an acl entry, inside which allows all (allowed an ip) and an ACL in one outside which the multicast stream, for example:

   access-list OUTSIDE extended permit igmp any any access-list OUTSIDE extended permit pim any any

   access-list OUTSIDE extended permit ip any object-group MCAST

   access-list OUTSIDE extended permit ip object-group MCAST any

  Where MCAST encompasses a group of 224.0.0.0 - 239.255.255.255.

  All traffic inside is allowed and only inspected return traffic and multicast traffic is allowed outside.

  JJ

• Drop ' n Go subnet to breast pre-existing network - Help with routing please

  Hi all

  I consider myself the best entry level when it comes to the Cisco ASA 5505, and I appreciate help or direction that someone would be able to provide regarding this question, I'll have. I'm sure there is something out there for this, but I was still not able to understand this with what I found.

  We currently have our installation of infrastructure like this: modem(69.14.72.6/255.255.255.248)-> ASA (192.168.1.1)-> Switch-> hosts and Servers(192.168.0.X\24).

  What I'm trying to do is to drop in a small router somewhere within this network with its own subnet and be able to communicate back him 192.168.0.X network, so it will look something like this: modem-> ASA-> Switch-> hosts and Servers(192.168.0.X\24) & hosts and Servers(192.168.1.X\24).

  I will allow this traffic if all goes well, then that only have 2 interfaces configured on the SAA (0/0 and 0/1-0/5 inside) outside and without changing the configuration of the switch. A few key phrases that come to mind from my research so far are "Hair pin" and "permit same-security-traffic intra-interface". Also, I am aware of the port-forwarding and as I understand it would not as convenient to configure a rule for each device connected to the 192.168.1.X\24 network.

  I hope someone can help me with this question, I've been at this for 3 weeks now.

  Thanks again to all!

  EDIT: Here is a diagram to help explain what I'm trying to do. The area in red is what I'm trying to add to the others that I already have.

  

  Hi James,

  For the route between the 2 networks, that you will need to either use a layer 3 switch or a "router on a stick".

  Installation of a layer 3 switch would interrupt less to your existing network.

  You are then ASA "inside" interface--> Layer 3 Distribution Switch--> 2 or more switches to access

• ASA 5505 VPN established, cannot access inside the network

  Hi, I recently got an ASA 5505, and I spent weeks to find a way to set up a VPN on it.

  After a few days, I finally found the solution to connect to my ASA with a VPN client yet and cannot access devices that are connected to the ASA.

  Here is my config:

  ASA Version 8.2 (5)
  !
  hostname asa01
  domain kevinasa01.net
  activate 8Ry2YjIyt7RRXU24 encrypted password
  2KFQnbNIdI.2KYOU encrypted passwd
  names of
  !
  interface Ethernet0/0
  switchport access vlan 2
  !
  interface Ethernet0/1
  !
  interface Ethernet0/2
  !
  interface Ethernet0/3
  switchport access vlan 5
  !
  interface Ethernet0/4
  !
  interface Ethernet0/5
  !
  interface Ethernet0/6
  !
  interface Ethernet0/7
  !
  interface Vlan1
  nameif inside
  security-level 100
  IP 192.168.1.1 255.255.255.0
  !
  interface Vlan2
  nameif outside
  security-level 0
  IP address dhcp setroute
  !
  interface Vlan5
  No nameif
  security-level 50
  IP 172.16.1.1 255.255.255.0
  !
  passive FTP mode
  DNS server-group DefaultDNS
  domain kevinasa01.net
  permit same-security-traffic intra-interface
  Remote_Kevin_splitTunnelAcl list standard access allowed 192.168.1.0 255.255.255.0
  inside_nat0_outbound to access ip 192.168.1.0 scope list allow 255.255.255.0 192.168.254.0 255.255.255.240
  inside_nat0_outbound list of allowed ip extended access all 192.168.254.0 255.255.255.0
  inside_nat0_outbound list of allowed ip extended access entire 192.168.1.0 255.255.255.0
  sheep - in extended Access-list allow IP 192.168.254.0 255.255.255.0 192.168.1.0 255.255.255.0
  access extensive list ip 192.168.254.0 outside_access_in allow 255.255.255.0 any
  access extensive list ip 192.168.254.0 inside_access_in allow 255.255.255.0 any
  pager lines 24
  asdm of logging of information
  Outside 1500 MTU
  Within 1500 MTU
  pool pool 192.168.254.1 - 192.168.254.10 255.255.255.0 IP mask
  ICMP unreachable rate-limit 1 burst-size 1
  don't allow no asdm history
  ARP timeout 14400
  Global 1 interface (outside)
  NAT (outside) 1 192.168.254.0 255.255.255.0
  NAT (inside) 0 access-list sheep - in
  NAT (inside) 1 192.168.1.0 255.255.255.0
  NAT (inside) 1 0.0.0.0 0.0.0.0
  Access-group outside_access_in in interface outside
  Timeout xlate 03:00
  Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
  Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
  Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
  Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
  timeout tcp-proxy-reassembly 0:01:00
  Floating conn timeout 0:00:00
  dynamic-access-policy-registration DfltAccessPolicy
  Enable http server
  http 192.168.1.0 255.255.255.0 inside
  No snmp server location
  No snmp Server contact
  Server enable SNMP traps snmp authentication linkup, linkdown cold start
  Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
  Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac
  Crypto ipsec transform-set ESP-DES-MD5 esp - esp-md5-hmac
  Crypto ipsec transform-set ESP-AES-128-SHA aes - esp esp-sha-hmac
  Crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
  Crypto ipsec transform-set ESP-AES-128-MD5-esp - aes esp-md5-hmac
  Crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
  Crypto ipsec transform-set ESP-AES-256-SHA 256 - aes - esp esp-sha-hmac
  Crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
  Crypto ipsec transform-set ESP-DES-SHA esp - esp-sha-hmac
  life crypto ipsec security association seconds 28800
  Crypto ipsec kilobytes of life - safety 4608000 association
  crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 pfs Group1 set
  Crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 value transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5
  outside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP
  outside_map interface card crypto outside
  crypto ISAKMP allow outside
  crypto ISAKMP policy 10
  preshared authentication
  3des encryption
  sha hash
  Group 2
  life 86400
  Telnet timeout 5
  SSH timeout 5
  Console timeout 0
  management-access inside
  dhcpd outside auto_config
  !
  dhcpd address 192.168.1.5 - 192.168.1.36 inside
  dhcpd allow inside
  !

  a basic threat threat detection
  Statistics-list of access threat detection
  no statistical threat detection tcp-interception
  WebVPN
  internal Remote_Kevin group strategy
  attributes of Group Policy Remote_Kevin
  value of server DNS 192.168.1.12 192.168.1.13
  VPN - connections 3
  Protocol-tunnel-VPN IPSec
  Split-tunnel-policy tunnelspecified
  value of Split-tunnel-network-list Remote_Kevin_splitTunnelAcl
  kevinasa01.NET value by default-field
  username kevin mz6JxJib/sQqvsw9 password encrypted privilege 0
  username kevin attributes
  VPN-group-policy Remote_Kevin
  type tunnel-group Remote_Kevin remote access
  attributes global-tunnel-group Remote_Kevin
  address-pool
  Group Policy - by default-Remote_Kevin
  IPSec-attributes tunnel-group Remote_Kevin
  pre-shared key *.
  !
  class-map inspection_default
  match default-inspection-traffic
  !
  !
  type of policy-card inspect dns preset_dns_map
  parameters
  maximum message length automatic of customer
  message-length maximum 512
  Policy-map global_policy
  class inspection_default
  inspect the preset_dns_map dns
  inspect the ftp
  inspect h323 h225
  inspect the h323 ras
  inspect the rsh
  inspect the rtsp
  inspect esmtp
  inspect sqlnet
  inspect the skinny
  inspect sunrpc
  inspect xdmcp
  inspect the sip
  inspect the netbios
  inspect the tftp
  Review the ip options
  inspect the icmp
  inspect the icmp error
  !
  global service-policy global_policy
  context of prompt hostname
  no remote anonymous reporting call
  Cryptochecksum:2bb1da52d1993eb9b13c2f6dc97c16cd
  : end

  Thank you

  Hello

  I read your message quickly through my cell phone. I don't know why you have spent your config twice. Maybe a typo issue.

  I see the acl sheep in the wrong way. I mean 192.168.254 are your pool VPN and 192.168.1.0 your local LAN.

  The acl must be:

  sheep - in extended access-list permit ip 192.168.1.0 255.255.255.0 192.168.254.0 255.255.255.0

  For nat (inside), you have 2 lines:

  NAT (inside) 1 192.168.1.0 255.255.255.0 ==> it is redundant as the 1 below does the same thing with more networks if there is inside side. You can delete it.
  NAT (inside) 1 0.0.0.0 0.0.0.0

  Why are you doing this nat (outside)?

  NAT (outside) 1 192.168.254.0 255.255.255.0

  Here are the first questions that I have seen by reading through my mobile. Let's change this and let me know. I'll take a look later with a computer (tonight or tomorrow)

  Thank you.

  PS: Please do not forget to rate and score as good response if this solves your problem.

• Cannot access internal network so AnyConnect SSL VPN, ASA 9.1 (6)

  Hello Cisco community support,

  I have a lab which consists of two virtual environments connected to a 3750-G switch that is connected to a 2901 router which is connected to an ASA 5512 - X which is connected to my ISP gateway. I configured SSL VPN using AnyConnect and can establish a VPN to the ASA from the outside but once connected, I can't access internal network resources or access the internet. My information network and ASA configuration is listed below. Thank you for any assistance you can offer.

  ISP network gateway: 10.1.10.0/24

  ASA to the router network: 10.1.40.0/30

  Pool DHCP VPN: 10.1.30.0/24

  Network of the range: 10.1.20.0/24

  Development network: 10.1.10.0/24

  : Saved
  :
  : Serial number: FCH18477CPT
  : Material: ASA5512, 4096 MB RAM, CPU Clarkdale 2793 MHz, 1 CPU (2 cores)
  :
  ASA 6,0000 Version 1
  !
  hostname ctcndasa01
  activate bcn1WtX5vuf3YzS3 encrypted password
  names of
  cnd-vpn-dhcp-pool 10.1.30.1 mask - 255.255.255.0 IP local pool 10.1.30.200
  !
  interface GigabitEthernet0/0
  nameif inside
  security-level 100
  IP 10.1.40.1 255.255.255.252
  !
  interface GigabitEthernet0/1
  nameif outside
  security-level 0
  address IP X.X.X.237 255.255.255.248
  !
  interface GigabitEthernet0/2
  Shutdown
  No nameif
  no level of security
  no ip address
  !
  interface GigabitEthernet0/3
  Shutdown
  No nameif
  no level of security
  no ip address
  !
  interface GigabitEthernet0/4
  Shutdown
  No nameif
  no level of security
  no ip address
  !
  interface GigabitEthernet0/5
  Shutdown
  No nameif
  no level of security
  no ip address
  !
  interface Management0/0
  management only
  nameif management
  security-level 100
  IP 192.168.1.1 255.255.255.0
  !
  boot system Disk0: / asa916-1-smp - k8.bin
  boot system Disk0: / asa912-smp - k8.bin
  passive FTP mode
  permit same-security-traffic intra-interface
  network of the NETWORK_OBJ_10.1.30.0_24 object
  10.1.30.0 subnet 255.255.255.0
  network obj_any object
  network obj_10.1.40.0 object
  10.1.40.0 subnet 255.255.255.0
  network obj_10.1.30.0 object
  10.1.30.0 subnet 255.255.255.0
  outside_access_in list extended access permitted ip object NETWORK_OBJ_10.1.30.0_24 all
  FREE access-list extended ip 10.1.40.0 NAT allow 255.255.255.0 10.1.30.0 255.255.255.0
  access-list 101 extended allow any4 any4-answer icmp echo
  access-list standard split allow 10.1.40.0 255.255.255.0
  pager lines 24
  Enable logging
  asdm of logging of information
  Within 1500 MTU
  Outside 1500 MTU
  management of MTU 1500
  ICMP unreachable rate-limit 1 burst-size 1
  ICMP allow any inside
  ICMP allow all outside
  ASDM image disk0: / asdm - 743.bin
  don't allow no asdm history
  ARP timeout 14400
  no permit-nonconnected arp
  NAT (inside, outside) source obj_10.1.40.0 destination obj_10.1.40.0 static static obj_10.1.30.0 obj_10.1.30.0 non-proxy-arp-search to itinerary
  NAT (inside, outside) static source any any static destination NETWORK_OBJ_10.1.30.0_24 NETWORK_OBJ_10.1.30.0_24 non-proxy-arp-search to itinerary
  Access-group outside_access_in in interface outside
  !
  Router eigrp 1
  Network 10.1.10.0 255.255.255.0
  Network 10.1.20.0 255.255.255.0
  Network 10.1.30.0 255.255.255.0
  Network 10.1.40.0 255.255.255.252
  !
  Route outside 0.0.0.0 0.0.0.0 10.1.10.1 1
  Timeout xlate 03:00
  Pat-xlate timeout 0:00:30
  Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
  Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
  Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
  Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
  timeout tcp-proxy-reassembly 0:01:00
  Floating conn timeout 0:00:00
  dynamic-access-policy-registration DfltAccessPolicy
  without activating the user identity
  identity of the user by default-domain LOCAL
  Enable http server
  http 192.168.1.0 255.255.255.0 management
  http 192.168.1.0 255.255.255.0 inside
  http X.X.X.238 255.255.255.255 outside
  No snmp server location
  No snmp Server contact
  Crypto ipsec pmtu aging infinite - the security association
  Crypto ca trustpoint ASDM_Launcher_Access_TrustPoint_0
  registration auto
  full domain name no
  name of the object CN = 10.1.30.254, CN = ctcndasa01
  ASDM_LAUNCHER key pair
  Configure CRL
  trustpool crypto ca policy
  string encryption ca ASDM_Launcher_Access_TrustPoint_0 certificates
  certificate c902a155
  308201cd 30820136 a0030201 020204c 0d06092a 864886f7 0d 010105 9 02a 15530
  0500302b 31133011 06035504 03130 has 63 61736130 31311430 12060355 74636e64
  0403130 31302e31 2e33302e 32353430 1e170d31 35303731 32303530 3133315a b
  170d 3235 30373039 30353031 33315 has 30 2 b 311330 0403130a 11060355 6374636e
  64617361 30313114 30120603 55040313 0b31302e 312e3330 2e323534 30819f30
  0d06092a 864886f7 010101 05000381 8 d 0d 003081 89028181 00a47cfc 6b5f8b9e
  9b106ad6 857ec34c 01028f71 d35fb7b5 6a61ea33 569fefca 3791657f eeee91f2
  705ab2ea 09207c4f dfbbc18a 749b19ae d3ca8aa7 3370510b a5a96fd4 f9e06332
  4355 db1a4b88 475f96a1 318f7031 40668a4d afa44384 819d fa164c05 2e586ccc
  3ea59b78 5976f685 2abbdcf6 f3b448e5 30aa96a8 1ed4e178 0001300 020301 4 d d
  06092a 86 01010505 00038181 0093656f 639e138e 90b69e66 b50190fc 4886f70d
  42d9b4a8 11828da4 e0765d9c 52d84f8b 8e70747e e760de88 c43dc5eb 1808bd0f
  fd2230c1 53f68ea1 00f3e956 97eb313e 26cc49d7 25b927b5 43d8d3fa f212fcaf
  59eb8104 98e3a1d9 e05d3bcb 428cd7c6 61b530f5 fe193d15 ef8c7f08 37ad16f5
  d8966b50 917a88bb f4f30d82 6f8b58ba 61
  quit smoking
  Telnet timeout 5
  SSH stricthostkeycheck
  SSH timeout 5
  SSH group dh-Group1-sha1 key exchange
  Console timeout 0
  VPN-addr-assign local reuse / 360 time
  management of 192.168.1.2 - dhcpd address 192.168.1.254
  enable dhcpd management
  !
  a basic threat threat detection
  Statistics-list of access threat detection
  no statistical threat detection tcp-interception
  Trust ASDM_Launcher_Access_TrustPoint_0 vpnlb-ip SSL-point
  SSL-trust outside ASDM_Launcher_Access_TrustPoint_0 point
  WebVPN
  allow outside
  AnyConnect image disk0:/anyconnect-linux-3.1.09013-k9.pkg 4
  AnyConnect image disk0:/anyconnect-macosx-i386-3.1.09013-k9.pkg 5
  AnyConnect image disk0:/anyconnect-win-3.1.09013-k9.pkg 6
  AnyConnect enable
  tunnel-group-list activate
  internal GroupPolicy_cnd-vpn group policy
  GroupPolicy_cnd-vpn group policy attributes
  WINS server no
  value of server DNS 8.8.8.8
  client ssl-VPN-tunnel-Protocol
  by default no
  xxxx GCOh1bma8K1tKZHa username encrypted password
  type tunnel-group cnd - vpn remote access
  tunnel-group global cnd-vpn-attributes
  address-cnd-vpn-dhcp-pool
  strategy-group-by default GroupPolicy_cnd-vpn
  tunnel-group cnd - vpn webvpn-attributes
  activation of the alias group cnd - vpn
  !
  ICMP-class class-map
  match default-inspection-traffic
  class-map inspection_default
  match default-inspection-traffic
  !
  !
  type of policy-card inspect dns preset_dns_map
  parameters
  maximum message length automatic of customer
  message-length maximum 512
  Policy-map icmp_policy
  icmp category
  inspect the icmp
  Policy-map global_policy
  class inspection_default
  inspect the preset_dns_map dns
  inspect the ftp
  inspect h323 h225
  inspect the h323 ras
  inspect the rsh
  inspect the rtsp
  inspect esmtp
  inspect sqlnet
  inspect the skinny
  inspect sunrpc
  inspect xdmcp
  inspect the sip
  inspect the netbios
  inspect the tftp
  Review the ip options
  inspect the icmp
  !
  global service-policy global_policy
  service-policy icmp_policy outside interface
  context of prompt hostname
  no remote anonymous reporting call
  Cryptochecksum:261228832f3b57983bcc2b4ed5a8a9d0
  : end
  ASDM image disk0: / asdm - 743.bin
  don't allow no asdm history

  Can you confirm that this is correct, your diagram shows your IP address public on ASA as 30 while you have assinged on 'outside' interface like 29?

• ASA 5510 - cannot access or ping internal networks

  Hello

  I can't ping of an internal network (10.1.1.0/24) to another internal network (10.1.2.0/24 and 10.1.3.0/24 and so on).

  The static route is in place and his works fine. I can ping these ASA network but not workstations.

  The error I get on ASA is: refuse packet dropped due to the implicit access list.

  Here is the configuration file:

  :

  ASA Version 8.0 (2)

  !

  host name asa

  test.com domain name

  activate the encrypted password of YLmDtv0bLkbX2VFy

  names of

  DNS-guard

  !

  interface Ethernet0/0

  nameif outside

  security-level 0

  IP address 20x.20x.16.xxx 255.255.255.224

  !

  interface Ethernet0/1

  Shutdown

  No nameif

  no level of security

  no ip address

  !

  interface Ethernet0/2

  nameif dmz

  security-level 50

  IP 172.16.0.254 255.255.255.0

  !

  interface Ethernet0/3

  nameif inside

  security-level 100

  IP 10.1.1.2 255.255.255.0

  !

  interface Management0/0

  nameif management

  security-level 100

  IP 172.16.200.1 255.255.255.248

  management only

  !

  access-list acl_outside note allows outdoor ping (need to enable internal rule of ICMP n ° 3)

  acl_outside list extended access permit icmp any one

  acl_outside list extended access permit tcp any any eq idle ftp

  acl_outside list extended access permit tcp any any object-group inactive DM_INLINE_TCP_1

  Comment from inside_access_in-access list internal nodes access to the outside world (all ports)

  inside_access_in list extended access allowed object-group TCPUDP any object-group everything

  access-list inside_access_in note allows ping within the network to the external network (internet).

  inside_access_in access list extended icmp permitted any any inactive echo

  access-list inside_access_in note allow ping respond both ways - from the inside to the outside and

  Note to inside_access_in list to access the outside inside (nat sound knots)

  inside_access_in list extended access allow DM_INLINE_SERVICE_1 of object-group a

  access-list extended sheep allowed ip 10.1.1.0 255.255.255.0 172.16.100.0 255.255.255.192

  access-list sheep extended permits all ip 172.16.100.0 255.255.255.192

  standard access list group1_splitTunnelAcl allow a

  pager lines 24

  Within 1500 MTU

  management of MTU 1500

  mask IP local VPN-pool 172.16.100.0 - 172.16.100.62 255.255.255.192

  ICMP unreachable rate-limit 1 burst-size 1

  ICMP allow all outside

  ICMP allow any inside

  ASDM image disk0: / asdm - 602.bin

  don't allow no asdm history

  ARP timeout 14400

  Global 1 20x.20x.16.xxx (outside)

  NAT (inside) 0 access-list sheep

  NAT (inside) 1 0.0.0.0 0.0.0.0

  Access-group acl_outside in interface outside

  inside_access_in access to the interface inside group

  Route outside 0.0.0.0 0.0.0.0 20x.20x.16.xxx 1

  Route inside 10.1.2.0 255.255.255.0 10.1.1.248 1

  Route inside 10.1.3.0 255.255.255.0 10.1.1.248 1

  Route inside 10.1.4.0 255.255.255.0 10.1.1.248 1

  Route inside 10.1.7.0 255.255.255.0 10.1.1.248 1

  Route inside 10.1.9.0 255.255.255.0 10.1.1.248 1

  Route inside 10.1.14.0 255.255.255.0 10.1.1.248 1

  Route inside 10.1.15.0 255.255.255.0 10.1.1.247 1

  Route inside 192.168.1.0 255.255.255.0 10.1.1.248 1

  Route inside 192.168.20.0 255.255.255.240 10.1.1.248 1

  Route inside 192.168.30.0 255.255.255.240 10.1.1.248 1

  Route inside 192.168.40.0 255.255.255.240 10.1.1.248 1

  Route inside 192.168.50.0 255.255.255.240 10.1.1.248 1

  Route inside 192.168.70.0 255.255.255.240 10.1.1.248 1

  Route inside 192.168.80.0 255.255.255.240 10.1.1.248 1

  -------------------------------------

  Any help or advice will be appreciated.

  Thank you

  You need two or three statements

  permit same-security-traffic intra-interface

  access-list sheep extended ip 10.1.2.0 allow 255.255.255.0 10.1.1.0 255.255.255.0

  10.1.3.0 IP Access-list extended sheep 255.255.255.0 allow 10.1.1.0 255.255.255.0

  10.1.4.0 IP Access-list extended sheep 255.255.255.0 allow 10.1.1.0 255.255.255.0

  10.1.7.0 IP Access-list extended sheep 255.255.255.0 allow 10.1.1.0 255.255.255.0

  10.1.9.0 IP Access-list extended sheep 255.255.255.0 allow 10.1.1.0 255.255.255.0

  10.1.14.0 IP Access-list extended sheep 255.255.255.0 allow 10.1.1.0 255.255.255.0

  and so on...

  apply sheep except for inside the interface which you already have (inside) nat 0 access-list sheep

  Concerning

• Remote vpn client can't access outside networks

  I configured a remote vpn ASA 5510 the wizard remote vpn. Users are able to get the vpn connection and access the internal network; but IMPOSSIBLE to

  access the outside network. (For the internal network, I want to talk about network behind the vpn to ASA, outside networks refers to society outside the ASA).

  In short, the external network of the company has default route to the ROUTER1 points. The ROUTER1 has road for access network and a default route to the internet. The ASA has a default route to the ROUTER1 points. the ROUTER1 also has a route to the address of the user remote vpn refers to the ASA.

  Hope it wise.

  But I don't know if my nat statement is correct. below is my statement of nat, is there something obvious lack? There is no translation network here, routable internet addresses.

  NAT (inside) 0-list of access inside_nat0_outbound

  public static 111.1.0.0 (Interior, exterior) 111.1.0.0 netmask 255.255.255.0

  public static 111.1.1.0 (Interior, exterior) 111.1.1.0 netmask 255.255.255.0

  public static 111.1.2.0 (Interior, exterior) 111.1.2.0 netmask 255.255.255.0

  networks outside the company (111.1.3.0/24; 111.1.4.0/24)

  |

  |

  the user remote vpn <-------------->internet <--------------------->ROUTER1 - ASA - Cat6509 - inside the network

  Any suggestion is appreciated.

  Thank you

  have you enabled "same-security-traffic intra-interface.

• Cisco ASA 8.4 (3) remote access VPN - client connects but cannot access inside the network

  I have problems to access the resources within the network when connecting with the Cisco VPN client for a version of 8.4 (3) operation of the IOS Cisco ASA 5510. I tried all new NAT 8.4 orders but cannot access the network interior. I can see traffic in newspapers when ping. I can only assume I have NAT evil or it's because the inside interface of the ASA is on the 24th of the same subnet as the network interior? Please see config below, any suggestion would be appreciated. I configured a VPN site to another in this same 5510 and it works well

  Thank you

  interface Ethernet0/0

  Speed 100

  full duplex

  nameif outside

  security-level 0

  IP x.x.x.x 255.255.255.240

  !

  interface Ethernet0/1

  Speed 100

  full duplex

  nameif inside

  security-level 100

  IP 10.88.10.254 255.255.255.0

  !

  interface Management0/0

  Shutdown

  nameif management

  security-level 0

  no ip address

  !

  permit same-security-traffic inter-interface

  permit same-security-traffic intra-interface

  network of the PAT_to_Outside_ClassA object

  10.88.0.0 subnet 255.255.0.0

  network of the PAT_to_Outside_ClassB object

  subnet 172.16.0.0 255.240.0.0

  network of the PAT_to_Outside_ClassC object

  Subnet 192.168.0.0 255.255.240.0

  network of the LocalNetwork object

  10.88.0.0 subnet 255.255.0.0

  network of the RemoteNetwork1 object

  Subnet 192.168.0.0 255.255.0.0

  network of the RemoteNetwork2 object

  172.16.10.0 subnet 255.255.255.0

  network of the RemoteNetwork3 object

  10.86.0.0 subnet 255.255.0.0

  network of the RemoteNetwork4 object

  10.250.1.0 subnet 255.255.255.0

  network of the NatExempt object

  10.88.10.0 subnet 255.255.255.0

  the Site_to_SiteVPN1 object-group network

  object-network 192.168.4.0 255.255.254.0

  object-network 172.16.10.0 255.255.255.0

  object-network 10.0.0.0 255.0.0.0

  outside_access_in deny ip extended access list a whole

  inside_access_in of access allowed any ip an extended list

  11 extended access-list allow ip 10.250.1.0 255.255.255.0 any

  outside_1_cryptomap to access extended list ip 10.88.0.0 255.255.0.0 allow object-group Site_to_SiteVPN1

  mask 10.250.1.1 - 10.250.1.254 255.255.255.0 IP local pool Admin_Pool

  NAT static NatExempt NatExempt of the source (indoor, outdoor)

  NAT (inside, outside) static source any any static destination RemoteNetwork4 RemoteNetwork4-route search

  NAT static LocalNetwork LocalNetwork destination (indoor, outdoor) static source RemoteNetwork1 RemoteNetwork1

  NAT static LocalNetwork LocalNetwork destination (indoor, outdoor) static source RemoteNetwork2 RemoteNetwork2

  NAT static LocalNetwork LocalNetwork destination (indoor, outdoor) static source RemoteNetwork3 RemoteNetwork3

  NAT (inside, outside) static source LocalNetwork LocalNetwork static destination RemoteNetwork4 RemoteNetwork4-route search

  !

  network of the PAT_to_Outside_ClassA object

  NAT dynamic interface (indoor, outdoor)

  network of the PAT_to_Outside_ClassB object

  NAT dynamic interface (indoor, outdoor)

  network of the PAT_to_Outside_ClassC object

  NAT dynamic interface (indoor, outdoor)

  Access-group outside_access_in in interface outside

  inside_access_in access to the interface inside group

  Route outside 0.0.0.0 0.0.0.0 x.x.x.x 1

  dynamic-access-policy-registration DfltAccessPolicy

  Sysopt connection timewait

  Service resetoutside

  Crypto ipsec transform-set ikev1 ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac

  Crypto ipsec transform-set ikev1 ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac

  Crypto ipsec transform-set ikev1 ESP-AES-192-SHA esp-aes-192 esp-sha-hmac

  Crypto ipsec transform-set ikev1 ESP-AES-128-MD5-esp - aes esp-md5-hmac

  Crypto ipsec transform-set esp-ikev1 esp-md5-hmac bh-series

  Crypto ipsec transform-set ikev1 esp ESP-DES-MD5-esp-md5-hmac

  Crypto ipsec transform-set ikev1 ESP-3DES-MD5-esp-3des esp-md5-hmac

  Crypto ipsec transform-set ikev1 ESP-DES-SHA esp - esp-sha-hmac

  Crypto ipsec transform-set ikev1 ESP-AES-128-SHA aes - esp esp-sha-hmac

  Crypto ipsec transform-set ikev1 ESP-AES-256-SHA esp-aes-256 esp-sha-hmac

  Crypto ipsec transform-set ikev1 SHA-ESP-3DES esp-3des esp-sha-hmac

  Crypto-map dynamic dynmap 10 set pfs

  Crypto-map dynamic dynmap 10 set transform-set bh - set ikev1

  life together - the association of security crypto dynamic-map dynmap 10 28800 seconds

  Crypto-map dynamic dynmap 10 kilobytes of life together - the association of safety 4608000

  Crypto-map dynamic dynmap 10 the value reverse-road

  card crypto mymap 1 match address outside_1_cryptomap

  card crypto mymap 1 set counterpart x.x.x.x

  card crypto mymap 1 set transform-set ESP-AES-256-SHA ikev1

  card crypto mymap 86400 seconds, 1 lifetime of security association set

  map mymap 1 set security-association life crypto kilobytes 4608000

  map mymap 100-isakmp ipsec crypto dynamic dynmap

  mymap outside crypto map interface

  crypto isakmp identity address

  Crypto isakmp nat-traversal 30

  Crypto ikev1 allow outside

  IKEv1 crypto ipsec-over-tcp port 10000

  IKEv1 crypto policy 5

  preshared authentication

  3des encryption

  sha hash

  Group 2

  life 86400

  IKEv1 crypto policy 10

  preshared authentication

  3des encryption

  sha hash

  Group 1

  life 86400

  IKEv1 crypto policy 50

  preshared authentication

  the Encryption

  md5 hash

  Group 2

  life 86400

  IKEv1 crypto policy 60

  preshared authentication

  aes-256 encryption

  sha hash

  Group 2

  life 86400

  IKEv1 crypto policy 70

  preshared authentication

  aes-256 encryption

  sha hash

  Group 1

  life 86400

  IKEv1 crypto policy 90

  preshared authentication

  aes encryption

  sha hash

  Group 2

  life 86400

  Telnet timeout 5

  Console timeout 0

  management-access inside

  a basic threat threat detection

  Statistics-list of access threat detection

  no statistical threat detection tcp-interception

  WebVPN

  internal BACKDOORVPN group policy

  BACKDOORVPN group policy attributes

  value of VPN-filter 11

  Ikev1 VPN-tunnel-Protocol

  Split-tunnel-policy tunnelall

  BH.UK value by default-field

  type tunnel-group BACKDOORVPN remote access

  attributes global-tunnel-group BACKDOORVPN

  address pool Admin_Pool

  Group Policy - by default-BACKDOORVPN

  IPSec-attributes tunnel-group BACKDOORVPN

  IKEv1 pre-shared-key *.

  tunnel-group x.x.x.x type ipsec-l2l

  tunnel-group ipsec-attributes x.x.x.x

  IKEv1 pre-shared-key *.

  !

  class-map inspection_default

  match default-inspection-traffic

  !

  !

  type of policy-card inspect dns preset_dns_map

  parameters

  maximum message length automatic of customer

  message-length maximum 512

  Policy-map global_policy

  class inspection_default

  inspect the preset_dns_map dns

  inspect the ftp

  inspect h323 h225

  inspect the h323 ras

  inspect the rsh

  inspect the rtsp

  inspect esmtp

  inspect sqlnet

  inspect the skinny

  inspect sunrpc

  inspect xdmcp

  inspect the sip

  inspect the netbios

  inspect the tftp

  Review the ip options

  !

  global service-policy global_policy

  Excellent.

  Evaluate the useful ticket.

  Thank you

  Rizwan James

• Network design help

  Hello

  I have 2 ISPS. I have a VLAN internal on PIX1 unit and use isps1 to get the traffic and our main network is on 10.10.10.x. I plan to build some VPNs to all my customer to ISP2 through another unit PIX2 networks. VPNS are for remote support purposes and to connect the servers to the customer of my position. They will be on different networks other than 10.10.10.x. But I would like to access these servers VPN through my network 10.10.10.x so.

  So I would like to know if it is possible to route traffic PIX1 PIX2 way 10.10.10.x unit can access customer LANs. Please notify

  Thank you

  Well, a really simple solution would involve a router on the 10.10.10.x - router address the subnet IP routing to point to PIX2.

  I assue you have no router, so PIX1 must perform this function.

  Allows to assume that the PIX1 IP address 10.10.10.1 and 10.10.10.2 PIX2.  For the segement LAN the default gateway is PIX1 - so all traffic will be spent in PIX1.  You have static routes for remote VPN subnets pointing PIX2 PIX1.  According to the PIXos version you are running, you must have same-security-traffic permit intra-interface enabled.

  You will perform NAT at one point, 10/8 is fairly common and widespread.

  HTH >

• Cannot ping internal VPN network.

  I'm trying to understand why my VPN client can't ping my internal network of 192.168.0.X. For example, I can access my server via a \\192.168.0.14\Drive network drive mapping but I can't ping. I am trying to troubleshoot some phones Avaya VPN and want to ensure that I can ping the machines needed.

  Thank you

  Manny

  Here is my config

  ASA5505-xxxx # sh run
  : Saved
  :
  ASA Version 8.0 (4)
  !
  hostname xxxxxx
  domain xxxx.com
  activate the xxxxxxxx password
  passwd xxxxxx
  names of
  name Roosevelt 192.168.2.0
  !
  interface Vlan1
  nameif inside
  security-level 100
  the IP 192.168.0.1 255.255.255.0
  !
  interface Vlan2
  nameif outside
  security-level 0
  IP 173.x.x.x 255.255.255.240.
  !
  interface Ethernet0/0
  Description link to xx.x.x. Router
  switchport access vlan 2
  !
  interface Ethernet0/1
  Description LINK to Linksys SR2024
  !
  interface Ethernet0/2
  !
  interface Ethernet0/3
  !
  interface Ethernet0/4
  !
  interface Ethernet0/5
  !
  interface Ethernet0/6
  !
  interface Ethernet0/7
  !
  boot system Disk0: / asa804 - k8.bin
  passive FTP mode
  clock timezone CST - 6
  clock to summer time recurring CDT
  DNS server-group DefaultDNS
  xxxxx.com domain name
  permit same-security-traffic intra-interface
  access-list 110 extended permit tcp any host 173.le eq xxxx 3389
  access-list 110 extended permit tcp any host 173.le eq www xxxx
  access-list 110 extended permit tcp any host 173.le eq smtp xxxx
  access-list 110 extended permit tcp any host 173.le eq xxxx area
  access-list 110 extended permit tcp any host 173.le eq https xxxx
  access-list 110 extended permit tcp any host 173.le eq ftp xxxx
  access-list 110 extended allow icmp a whole
  access-list 110 extended permit tcp any host 173.le eq xxxx 3389
  access-list 110 extended permit tcp any host 173.165.93.164 eq www
  access-list 110 extended permit tcp any host 173.165.93.164 eq smtp
  access-list 110 extended allow tcp no matter what field of host 173.165.93.164 eq
  access-list 110 extended permit tcp any host 173.165.93.164 eq https
  access-list 110 extended permit tcp any host 173.165.93.164 eq ftp
  access-list 110 extended permit tcp any host 173.165.93.163 eq 3389
  access-list 110 extended permit tcp any host 173.165.93.163 eq www
  permit access ip 192.168.0.0 scope list Inside_nat0_outbound 255.255.255.0 255.255.255.0 Roosevelt
  Inside_nat0_outbound list of allowed ip extended access any 10.10.1.0 255.255.255.0
  permit access ip 192.168.0.0 scope list outside_1_cryptomap 255.255.255.0 255.255.255.0 Roosevelt
  Standard access list CSC_splitTunnelAcl allow a
  pager lines 24
  Enable logging
  exploitation forest-size of the buffer of 1000000
  debug logging in buffered memory
  asdm of logging of information
  Within 1500 MTU
  Outside 1500 MTU
  mask 10.10.1.1 - 10.10.1.10 255.255.255.0 IP local pool VPNPool
  ICMP unreachable rate-limit 1 burst-size 1
  ASDM image disk0: / asdm - 613.bin
  don't allow no asdm history
  ARP timeout 14400
  Global interface 5 (external)
  NAT (inside) 0-list of access Inside_nat0_outbound
  NAT (inside) 5 0.0.0.0 0.0.0.0
  public static 173.le (Interior, exterior) xxxx 192.168.0.14 netmask 255.255.255.255
  public static 173.le (Interior, exterior) xxxx 192.168.0.17 netmask 255.255.255.255
  public static 173.le (Interior, exterior) xxxx 192.168.0.12 netmask 255.255.255.255
  public static 173.le (Interior, exterior) xxxx 192.168.0.11 netmask 255.255.255.255
  public static 173.le (Interior, exterior) xxxx 192.168.0.13 netmask 255.255.255.255
  Access-group 110 in external interface
  Route outside 0.0.0.0 0.0.0.0 173.le xxxx 1
  Timeout xlate 03:00
  Timeout conn 0 half-closed 10:00:10: 00 udp 0:02:00 icmp 0:00:02
  Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
  Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
  Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
  dynamic-access-policy-registration DfltAccessPolicy
  the ssh LOCAL console AAA authentication
  Enable http server
  http 192.168.0.0 255.255.255.0 inside
  No snmp Server contact
  Server enable SNMP traps snmp authentication linkup, linkdown cold start
  Crypto ipsec transform-set ESP-DES-SHA esp - esp-sha-hmac
  Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
  Crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
  Crypto ipsec transform-set ESP-DES-MD5 esp - esp-md5-hmac
  Crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
  Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac
  Crypto ipsec transform-set ESP-AES-256-SHA 256 - aes - esp esp-sha-hmac
  Crypto ipsec transform-set ESP-AES-128-SHA aes - esp esp-sha-hmac
  Crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
  Crypto ipsec transform-set ESP-AES-128-MD5-esp - aes esp-md5-hmac
  life crypto ipsec security association seconds 28800
  Crypto ipsec kilobytes of life - safety 4608000 association
  Dynamic crypto map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set pfs
  SYSTEM_DEFAULT_CRYPTO_MAP game 65535 dynamic-map crypto transform-set ESP-AES-128-SHA ESP ESP-AES-128-MD5 ESP-AES-192-SHA-AES-192-MD5
  ESP-AES-256-SHA SHA-ESP-3DES ESP-AES-256-MD5 ESP-3DES-MD5 ESP-DES-SHA ESP-DES-MD5
  Dynamic crypto map SYSTEM_DEFAULT_CRYPTO_MAP 65535 define security association lifetime 28800 seconds
  cryptographic kilobytes 4608000 life of the set - the association of security of the 65535 SYSTEM_DEFAULT_CRYPTO_MAP of the dynamic-map
  card crypto outside_map 1 match address outside_1_cryptomap
  card crypto outside_map 1 set counterpart 99 xxxxx
  card crypto outside_map 1 set of transformation-ESP-DES-SHA
  outside_map map 1 lifetime of security association set seconds 28800 crypto
  card crypto outside_map 1 set security-association life kilobytes 4608000
  outside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP
  outside_map interface card crypto outside
  crypto ISAKMP allow outside
  crypto ISAKMP policy 5
  preshared authentication
  3des encryption
  sha hash
  Group 2
  life 86400
  crypto ISAKMP policy 10
  preshared authentication
  the Encryption
  sha hash
  Group 2
  life 86400
  ISAKMP nat-traversal crypto
  Telnet timeout 5
  SSH 0.0.0.0 0.0.0.0 outdoors
  SSH timeout 10
  Console timeout 0
  dhcpd 192.168.0.14 dns 68.87.77.130
  dhcpd wins 192.168.0.14
  dhcpd domain xxxx.com
  !
  dhcpd address 192.168.0.50 - 192.168.0.150 inside
  dhcpd allow inside
  !

  a basic threat threat detection
  host of statistical threat detection
  statistical threat detection port
  Statistical threat detection Protocol
  Statistics-list of access threat detection
  no statistical threat detection tcp-interception
  internal group CSC policy
  attributes of group CSC policy
  value of 192.168.0.14 WINS server
  VPN-idle-timeout no
  Protocol-tunnel-VPN IPSec svc
  Split-tunnel-policy tunnelspecified
  value of Split-tunnel-network-list CSC_splitTunnelAcl
  username lrodriguez password xxxxxx
  username lrodriguez attributes
  VPN - 10 concurrent connections
  username password xxxxx jthomas
  username mramirez password xxxxx
  tunnel-group 99 xxxx type ipsec-l2l
  tunnel-group 99 xxxx ipsec-attributes
  pre-shared-key *.
  tunnel-group CSC type remote access
  attributes global-tunnel-group CSC
  address pool VPNPool
  Group Policy - by default-CSC
  tunnel-group CSC ipsec-attributes
  pre-shared-key *.
  !
  class-map inspection_default
  match default-inspection-traffic
  !
  !
  type of policy-card inspect dns preset_dns_map
  parameters
  message-length maximum 512
  Policy-map global_policy
  class inspection_default
  inspect the preset_dns_map dns
  inspect the ftp
  inspect h323 h225
  inspect the h323 ras
  inspect the netbios
  inspect the rsh
  inspect the rtsp
  inspect the skinny
  inspect esmtp
  inspect sqlnet
  inspect sunrpc
  inspect the tftp
  inspect the sip
  inspect xdmcp
  !
  global service-policy global_policy
  Server SMTP 192.168.0.xx
  context of prompt hostname

  On the VPN Client PC, see if there is any firewall is activated. Tried to disable the firewall, if it's on.

  I suppose also that the Avaya server default gateway is 192.168.0.1?

• ASA 5512 Anyconnect VPN cannot connect inside the network 9.1 x

  Hello

  I'm new to ASA, can I please help with this. I managed to connect to the vpn through the mobility cisco anyconnect client, but I am unable to connect to the Internet. the allocated ip address was 172.16.1.60 and it seems OK, I thought my acl and nat is configured to allow and translate the given vpn ip pool but I'm not able to ping anything on the inside.

  If anyone can share some light... There's got to be something escapes me...

  Here's my sh run

  Thank you

  Raul

  -------------------------------------------------------------------------------

  DLSYD - ASA # sh run

  : Saved
  :
  ASA 9.1 Version 2
  !
  hostname DLSYD - ASA
  domain delo.local
  activate the encrypted password of UszxwHyGcg.e6o4z
  names of
  mask 172.16.1.60 - 172.16.1.70 255.255.255.0 IP local pool DLVPN_Pool
  !
  interface GigabitEthernet0/0
  Shutdown
  No nameif
  no level of security
  no ip address
  !
  interface GigabitEthernet0/1
  Shutdown
  No nameif
  no level of security
  no ip address
  !
  interface GigabitEthernet0/2
  Post description
  10 speed
  full duplex
  nameif Ext
  security-level 0
  IP 125.255.160.54 255.255.255.252
  !
  interface GigabitEthernet0/3
  Description Int
  10 speed
  full duplex
  nameif Int
  security-level 100
  IP 192.168.255.2 255.255.255.252
  !
  interface GigabitEthernet0/4
  Shutdown
  No nameif
  no level of security
  no ip address
  !
  interface GigabitEthernet0/5
  Shutdown
  No nameif
  no level of security
  no ip address
  !
  interface Management0/0
  management only
  nameif management
  security-level 100
  IP 192.168.1.1 255.255.255.0
  !
  boot system Disk0: / asa912-smp - k8.bin
  passive FTP mode
  clock timezone IS 10
  clock daylight saving time EDT recurring last Sun Oct 02:00 last Sun Mar 03:00
  DNS lookup field inside
  DNS domain-lookup Int
  DNS server-group DefaultDNS
  192.168.1.90 server name
  192.168.1.202 server name
  domain delo.local
  permit same-security-traffic intra-interface
  network dlau40 object
  Home 192.168.1.209
  network dlausyd02 object
  host 192.168.1.202
  network of the object 192.168.1.42
  host 192.168.1.42
  dlau-utm network object
  host 192.168.1.50
  network dlauxa6 object
  Home 192.168.1.62
  network of the 192.168.1.93 object
  host 192.168.1.93
  network dlau-ftp01 object
  Home 192.168.1.112
  dlau-dlau-ftp01 network object
  network dlvpn_network object
  subnet 172.16.1.0 255.255.255.0
  the object-group Good-ICMP ICMP-type
  echo ICMP-object
  response to echo ICMP-object
  ICMP-object has exceeded the time
  Object-ICMP traceroute
  ICMP-unreachable object
  DLVPN_STAcl list standard access allowed 192.168.0.0 255.255.0.0
  Standard access list DLVPN_STAcl allow 196.1.1.0 255.255.255.0
  DLVPN_STAcl list standard access allowed 126.0.0.0 255.255.0.0
  Ext_access_in access list extended icmp permitted any object-group Good-ICMP
  Ext_access_in list extended access permitted tcp dlau-ftp01 eq ftp objects
  Ext_access_in list extended access permit tcp any object dlausyd02 eq https
  Ext_access_in list extended access permit tcp any object dlau-utm eq smtp
  Ext_access_in list extended access permit tcp any object dlauxa6 eq 444
  Ext_access_in access-list extended permitted ip object annete-home everything
  pager lines 24
  Enable logging
  asdm of logging of information
  MTU 1500 Ext
  MTU 1500 Int
  management of MTU 1500
  ICMP unreachable rate-limit 1 burst-size 1
  ASDM image disk0: / asdm - 713.bin
  don't allow no asdm history
  ARP timeout 14400
  no permit-nonconnected arp
  NAT (Int, Ext) static source any any destination static dlvpn_network dlvpn_network non-proxy-arp
  !
  network dlausyd02 object
  NAT (Int, Ext) interface static tcp https https service
  dlau-utm network object
  NAT (Int, Ext) interface static tcp smtp smtp service
  network dlauxa6 object
  NAT (Int, Ext) interface static tcp 444 444 service
  network dlau-ftp01 object
  NAT (Int, Ext) interface static tcp ftp ftp service
  Access-group Ext_access_in in Ext interface
  Route Ext 0.0.0.0 0.0.0.0 125.255.160.53 1
  Route Int 192.168.0.0 255.255.0.0 192.168.255.1 1
  Timeout xlate 03:00
  Pat-xlate timeout 0:00:30
  Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
  Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
  Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
  Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
  timeout tcp-proxy-reassembly 0:01:00
  Floating conn timeout 0:00:00
  dynamic-access-policy-registration DfltAccessPolicy
  identity of the user by default-domain LOCAL
  AAA authentication enable LOCAL console
  AAA authentication LOCAL telnet console
  AAA authentication http LOCAL console
  LOCAL AAA authentication serial console
  the ssh LOCAL console AAA authentication
  http server enable 44310
  http server idle-timeout 30
  http 192.168.0.0 255.255.0.0 Int
  No snmp server location
  No snmp Server contact
  Server enable SNMP traps snmp authentication linkup, linkdown warmstart of cold start
  Crypto ipsec pmtu aging infinite - the security association
  trustpool crypto ca policy
  Telnet 192.168.1.0 255.255.255.0 management
  Telnet timeout 30
  SSH 192.168.0.0 255.255.0.0 Int
  SSH timeout 30
  SSH group dh-Group1-sha1 key exchange
  Console timeout 0
  No ipv6-vpn-addr-assign aaa
  no local ipv6-vpn-addr-assign
  management of 192.168.1.2 - dhcpd address 192.168.1.254
  enable dhcpd management
  !
  a basic threat threat detection
  Statistics-list of access threat detection
  no statistical threat detection tcp-interception
  NTP server 61.8.0.89 prefer external source
  SSL encryption rc4-aes128-sha1 aes256-3des-sha1 sha1 sha1
  WebVPN
  port 44320
  allow outside
  Select Ext
  AnyConnect essentials
  AnyConnect image disk0:/anyconnect-win-3.1.05170-k9.pkg 1
  AnyConnect enable
  tunnel-group-list activate
  internal GroupPolicy_DLVPN group strategy
  attributes of Group Policy GroupPolicy_DLVPN
  WINS server no
  value of server DNS 192.168.1.90 192.168.1.202
  client ssl-VPN-tunnel-Protocol
  Split-tunnel-policy tunnelspecified
  value of Split-tunnel-network-list DLVPN_STAcl
  delonghi.local value by default-field
  WebVPN
  AnyConnect Dungeon-Installer installed
  time to generate a new key 30 AnyConnect ssl
  AnyConnect ssl generate a new method ssl key
  AnyConnect ask flawless anyconnect
  encrypted vendor_ipfx pb6/6ZHhaPgDKSHn password username
  vendor_pacnet mIHuYi1jcf9OqVN9 encrypted password username
  username admin password encrypted tFU2y7Uo15ahFyt4
  type tunnel-group DLVPN remote access
  attributes global-tunnel-group DLVPN
  address pool DLVPN_Pool
  Group Policy - by default-GroupPolicy_DLVPN
  tunnel-group DLVPN webvpn-attributes
  enable DLVPN group-alias
  !
  class-map inspection_default
  match default-inspection-traffic
  !
  !
  type of policy-card inspect dns preset_dns_map
  parameters
  maximum message length automatic of customer
  message-length maximum 512
  Policy-map global_policy
  class inspection_default
  inspect the preset_dns_map dns
  inspect h323 h225
  inspect the h323 ras
  inspect the rsh
  inspect the rtsp
  inspect esmtp
  inspect sqlnet
  inspect the skinny
  inspect sunrpc
  inspect xdmcp
  inspect the netbios
  Review the ip options
  inspect the ftp
  inspect the tftp
  !
  global service-policy global_policy
  SMTPS
  Server 192.168.1.50
  Group Policy - by default-DfltGrpPolicy
  context of prompt hostname
  no remote anonymous reporting call
  Cryptochecksum:67aa840d5cfff989bc045172b2d06212
  : end
  DLSYD - ASA #.

  Hello

  Add just to be sure, the following configurations related to ICMP traffic

  Policy-map global_policy
  class inspection_default
  inspect the icmp
  inspect the icmp error

  Your NAT0 configurations for traffic between LAN and VPN users seem to. Your Split Tunnel ACL seems fine too because it has included 192.168.0.0/16. I don't know what are the other.

  I wonder if this is a test installation since you don't seem to have a dynamic PAT configured for your local network at all. Just a few static PAT and the NAT0 for VPN configurations. If it is a test configuration yet then confirmed that the device behind the ASA in the internal network has a default route pointing to the ASAs interface and if so is it properly configured?

  Can you same ICMP the directly behind the ASA which is the gateway to LANs?

  If you want to try ICMP interface internal to the VPN ASA then you can add this command and then try ICMP to the internal interface of the ASA

  Int Management-access

  As the post is a little confusing in the sense that the subject talk on the traffic doesn't work not internal to the network, while the message mentions the traffic to the Internet? I guess you meant only traffic to the local network because you use Split Tunnel VPN, which means that Internet traffic should use the VPN local Internet users while traffic to the networks specified in the ACL Tunnel Split list should be sent to the VPN.

  -Jouni

• remote VPN and vpn site to site vpn remote users unable to access the local network

  As per below config remote vpn and vpn site to site vpn remote users unable to access the local network please suggest me a required config

  The local 192.168.215.4 not able ping server IP this server connectivity remote vpn works fine but not able to ping to the local network vpn users.

  ASA Version 8.2 (2)
  !
  host name
  domain kunchevrolet
  activate r8xwsBuKsSP7kABz encrypted password
  r8xwsBuKsSP7kABz encrypted passwd
  names of
  !
  interface Ethernet0/0
  nameif outside
  security-level 0
  PPPoE client vpdn group dataone
  IP address pppoe
  !
  interface Ethernet0/1
  nameif inside
  security-level 50
  IP 192.168.215.2 255.255.255.0
  !
  interface Ethernet0/2
  nameif Internet
  security-level 0
  IP address dhcp setroute
  !
  interface Ethernet0/3
  Shutdown
  No nameif
  no level of security
  no ip address
  !
  interface Management0/0
  Shutdown
  No nameif
  no level of security
  no ip address
  management only
  !
  passive FTP mode
  clock timezone IST 5 30
  DNS server-group DefaultDNS
  domain kunchevrolet
  permit same-security-traffic intra-interface
  object-group network GM-DC-VPN-Gateway
  object-group, net-LAN
  access extensive list ip 192.168.215.0 sptnl allow 255.255.255.0 192.168.2.0 255.255.255.0
  192.168.215.0 IP Access-list extended sheep 255.255.255.0 allow 192.168.2.0 255.255.255.0
  tunnel of splitting allowed access list standard 192.168.215.0 255.255.255.0
  pager lines 24
  Enable logging
  asdm of logging of information
  Outside 1500 MTU
  Within 1500 MTU
  MTU 1500 Internet
  IP local pool VPN_Users 192.168.2.1 - 192.168.2.250 mask 255.255.255.0
  ICMP unreachable rate-limit 1 burst-size 1
  enable ASDM history
  ARP timeout 14400
  NAT-control
  Global 1 interface (outside)
  NAT (inside) 1 0.0.0.0 0.0.0.0
  Route outside 0.0.0.0 0.0.0.0 59.90.214.1 1
  Timeout xlate 03:00
  Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
  Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
  Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
  Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
  timeout tcp-proxy-reassembly 0:01:00
  dynamic-access-policy-registration DfltAccessPolicy
  the ssh LOCAL console AAA authentication
  AAA authentication LOCAL telnet console
  AAA authentication http LOCAL console
  AAA authentication enable LOCAL console
  LOCAL AAA authentication serial console
  Enable http server
  x.x.x.x 255.255.255.252 out http
  http 192.168.215.0 255.255.255.252 inside
  http 192.168.215.0 255.255.255.0 inside
  No snmp server location
  No snmp Server contact
  Server enable SNMP traps snmp authentication linkup, linkdown cold start
  Crypto ipsec transform-set esp-3des esp-sha-hmac RIGHT
  life crypto ipsec security association seconds 28800
  Crypto ipsec kilobytes of life - safety 4608000 association
  Crypto-map dynamic dynmap 65500 transform-set RIGHT
  card crypto 10 VPN ipsec-isakmp dynamic dynmap
  card crypto VPN outside interface
  card crypto 10 ASA-01 set peer 221.135.138.130
  card crypto 10 ASA - 01 the transform-set RIGHT value
  crypto ISAKMP allow outside
  crypto ISAKMP policy 10
  preshared authentication
  3des encryption
  sha hash
  Group 2
  life 86400
  crypto ISAKMP policy 65535
  preshared authentication
  the Encryption
  sha hash
  Group 2
  lifetime 28800
  Telnet 192.168.215.0 255.255.255.0 inside
  Telnet timeout 5
  SSH 0.0.0.0 0.0.0.0 outdoors
  SSH timeout 5
  Console timeout 0
  management-access inside
  VPDN group dataone request dialout pppoe
  VPDN group dataone localname bb4027654187_scdrid
  VPDN group dataone ppp authentication chap
  VPDN username bb4027654187_scdrid password * local store
  interface for identifying DHCP-client Internet customer
  dhcpd dns 218.248.255.141 218.248.245.1
  !
  dhcpd address 192.168.215.11 - 192.168.215.254 inside
  dhcpd allow inside
  !
  a basic threat threat detection
  Statistics-list of access threat detection
  no statistical threat detection tcp-interception
  Des-sha1 encryption SSL
  WebVPN
  allow outside
  tunnel-group-list activate
  internal kun group policy
  kun group policy attributes
  VPN - connections 8
  Protocol-tunnel-VPN IPSec
  Split-tunnel-policy tunnelspecified
  Split-tunnel-network-list value split tunnel
  kunchevrolet value by default-field
  test P4ttSyrm33SV8TYp encrypted password username
  username kunauto password bSHrKTGl8PUbvus / encrypted privilege 15
  username kunauto attributes
  Strategy Group-VPN-kun
  Protocol-tunnel-VPN IPSec
  tunnel-group vpngroup type remote access
  tunnel-group vpngroup General attributes
  address pool VPN_Users
  Group Policy - by default-kun
  tunnel-group vpngroup webvpn-attributes
  the vpngroup group alias activation
  vpngroup group tunnel ipsec-attributes
  pre-shared key *.
  type tunnel-group test remote access
  tunnel-group x.x.x.x type ipsec-l2l
  tunnel-group ipsec-attributes x.x.x.x
  pre-shared key *.
  !
  class-map inspection_default
  match default-inspection-traffic
  !
  !
  type of policy-card inspect dns preset_dns_map
  parameters
  maximum message length automatic of customer
  message-length maximum 512
  Policy-map global_policy
  class inspection_default
  inspect the preset_dns_map dns
  inspect the ftp
  inspect h323 h225
  inspect the h323 ras
  Review the ip options
  inspect the netbios
  inspect the rsh
  inspect the rtsp
  inspect the skinny
  inspect esmtp
  inspect sqlnet
  inspect sunrpc
  inspect the tftp
  inspect the sip
  inspect xdmcp
  inspect the icmp
  !
  global service-policy global_policy
  context of prompt hostname
  call-home
  Profile of CiscoTAC-1
  no active account
  http https://tools.cisco.com/its/service/oddce/services/DDCEService destination address
  email address of destination [email protected] / * /
  destination-mode http transport
  Subscribe to alert-group diagnosis
  Subscribe to alert-group environment
  Subscribe to alert-group monthly periodic inventory
  monthly periodicals to subscribe to alert-group configuration
  daily periodic subscribe to alert-group telemetry
  Cryptochecksum:0d2497e1280e41ab3875e77c6b184cf8
  : end
  kunauto #.

  Hello

  Looking at the configuration, there is an access list this nat exemption: -.

  192.168.215.0 IP Access-list extended sheep 255.255.255.0 allow 192.168.2.0 255.255.255.0

  But it is not applied in the States of nat.

  Send the following command to the nat exemption to apply: -.

  NAT (inside) 0 access-list sheep

  Kind regards

  Dinesh Moudgil

  P.S. Please mark this message as 'Responded' If you find this information useful so that it brings goodness to other users of the community

• Access to the external network when connected to the VPN

  I have a 5505 I successfully install an IPSEC connection to. It uses NT to Active Directory authentication to authenticate. After I log in, I can access everything on the remote network (internal). I can't access anything on the internet.

  Nothing behind the ASA can access internet, vpn clients that cannot come back on.

  Syslog messages show buiding vpn clients to the top and down the ICMP connections if they try to do a ping to the outside, but they are not answered.

  I know it's most likely a statement ACL or NAT that I am out of ideas?

  config attacched

  You have 2 options.

  Split tunneling, unencrypted access to internet.

  Public Internet on a stick, integrated internet traffic to ASA and back on.

  permit same-security-traffic intra-interface

  Global 1 interface (outside)

  NAT (outside) 1

• Why my VPN clients cannot access network drives and resources?

  I have a cisco asa 5505 configured to be a VPN gateway. I can dial using the anyconnect VPN client. The remote user is assigned an IP address to my specifications. However... The remote user cannot access network such as disks in network resources or the fax server. I've done everything I can to set the right settings NAT and ACLs, but in vain. I write my config... If someone can track down the problem. It would be appreciated!

  : Saved

  :

  ASA Version 8.2 (5)

  !

  ciscoasa hostname

  Cisco domain name

  activate the password xxxxxxxxxxxxx

  passwd xxxxxxxxxxxxxxxxx

  names of

  name 68.191.xxx.xxx outdoors

  !

  interface Ethernet0/0

  switchport access vlan 2

  !

  interface Ethernet0/1

  !

  interface Ethernet0/2

  !

  interface Ethernet0/3

  !

  interface Ethernet0/4

  !

  interface Ethernet0/5

  !

  interface Ethernet0/6

  !

  interface Ethernet0/7

  !

  interface Vlan1

  nameif inside

  security-level 100

  IP 192.168.201.200 255.255.255.0

  !

  interface Vlan2

  nameif outside

  security-level 0

  IP address outside 255.255.255.0

  !

  passive FTP mode

  DNS domain-lookup outside

  DNS lookup field inside

  DNS server-group DefaultDNS

  192.168.201.1 server name

  Cisco domain name

  permit same-security-traffic inter-interface

  permit same-security-traffic intra-interface

  object-group Protocol TCPUDP

  object-protocol udp

  object-tcp protocol

  object-group network obj - 192.168.201.0

  FREE access-list extended ip 192.168.201.0 NAT allow 255.255.255.0 192.168.201.0 255.255.255.0

  NAT-FREE 192.168.202.0 permits all ip extended access list 255.255.255.0

  FREE access-list extended ip 192.168.202.0 NAT allow 255.255.255.0 any

  Extended access list-NAT-FREE enabled a whole icmp

  allow any scope to an entire ip access list

  allow any scope to the object-group TCPUDP an entire access list

  allow any scope to an entire icmp access list

  inside_access_in of access allowed any ip an extended list

  inside_access_in list extended access allow TCPUDP of object-group a

  inside_access_in list extended access permit icmp any one

  outside_access_in of access allowed any ip an extended list

  outside_access_in list extended access allow TCPUDP of object-group a

  outside_access_in list extended access permit icmp any one

  Standard access list DefaultRAGroup_splitTunnelAcl allow 192.168.201.0 255.255.255.0

  access extensive list ip 192.168.202.0 inside_nat0_outbound allow 255.255.255.0 192.168.201.0 255.255.255.0

  inside_nat0_outbound list extended access permit icmp any one

  inside_nat0_outbound_1 of access allowed any ip an extended list

  pager lines 24

  Enable logging

  asdm of logging of information

  Outside 1500 MTU

  Within 1500 MTU

  mask 192.168.202.1 - 192.168.202.50 255.255.255.0 IP local pool KunduVPN

  ICMP unreachable rate-limit 1 burst-size 1

  don't allow no asdm history

  ARP timeout 14400

  NAT-control

  Global 1 interface (outside)

  NAT (inside) 0 inside_nat0_outbound_1 list of outdoor access

  NAT (inside) 1 192.168.201.0 255.255.255.0

  Access-group outside_access_in in interface outside

  inside_access_in access to the interface inside group

  Route inside 0.0.0.0 0.0.0.0 192.168.201.1 1

  Route inside 0.0.0.0 255.255.255.255 outdoor 1

  Timeout xlate 03:00

  Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02

  Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00

  Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00

  Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute

  timeout tcp-proxy-reassembly 0:01:00

  Floating conn timeout 0:00:00

  dynamic-access-policy-registration DfltAccessPolicy

  Enable http server

  http 192.168.201.0 255.255.255.0 inside

  http 0.0.0.0 0.0.0.0 outdoors

  No snmp server location

  No snmp Server contact

  Server enable SNMP traps snmp authentication linkup, linkdown cold start

  Crypto ipsec transform-set esp-3des esp-sha-hmac TRANS_ESP_3DES_SHA

  Crypto ipsec transform-set transit mode TRANS_ESP_3DES_SHA

  Crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac

  Crypto ipsec transform-set ESP-DES-SHA esp - esp-sha-hmac

  Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac

  Crypto ipsec transform-set ESP-DES-MD5 esp - esp-md5-hmac

  Crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac

  Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac

  Crypto ipsec transform-set ESP-AES-256-SHA 256 - aes - esp esp-sha-hmac

  Crypto ipsec transform-set ESP-AES-128-SHA aes - esp esp-sha-hmac

  Crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac

  Crypto ipsec transform-set ESP-AES-128-MD5-esp - aes esp-md5-hmac

  life crypto ipsec security association seconds 28800

  Crypto ipsec kilobytes of life - safety 4608000 association

  crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 pfs Group1 set

  Crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 value transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5

  outside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP

  outside_map interface card crypto outside

  Crypto ca trustpoint ASDM_TrustPoint0

  registration auto

  name of the object CN = ciscoasa

  Keypairs xxx

  Proxy-loc-transmitter

  Configure CRL

  XXXXXXXXXXXXXXXXXXXXXXXX

  quit smoking

  crypto ISAKMP allow outside

  crypto ISAKMP allow inside

  crypto ISAKMP policy 10

  authentication crack

  aes-256 encryption

  sha hash

  Group 2

  life 86400

  crypto ISAKMP policy 20

  authentication rsa - sig

  aes-256 encryption

  sha hash

  Group 2

  life 86400

  crypto ISAKMP policy 30

  preshared authentication

  aes-256 encryption

  sha hash

  Group 2

  life 86400

  crypto ISAKMP policy 40

  authentication crack

  aes-192 encryption

  sha hash

  Group 2

  life 86400

  crypto ISAKMP policy 50

  authentication rsa - sig

  aes-192 encryption

  sha hash

  Group 2

  life 86400

  crypto ISAKMP policy 60

  preshared authentication

  aes-192 encryption

  sha hash

  Group 2

  life 86400

  crypto ISAKMP policy 70

  authentication crack

  aes encryption

  sha hash

  Group 2

  life 86400

  crypto ISAKMP policy 80

  authentication rsa - sig

  aes encryption

  sha hash

  Group 2

  life 86400

  crypto ISAKMP policy 90

  preshared authentication

  aes encryption

  sha hash

  Group 2

  life 86400

  crypto ISAKMP policy 100

  authentication crack

  3des encryption

  sha hash

  Group 2

  life 86400

  crypto ISAKMP policy 110

  authentication rsa - sig

  3des encryption

  sha hash

  Group 2

  life 86400

  crypto ISAKMP policy 120

  preshared authentication

  3des encryption

  sha hash

  Group 2

  life 86400

  crypto ISAKMP policy 130

  authentication crack

  the Encryption

  sha hash

  Group 2

  life 86400

  crypto ISAKMP policy 140

  authentication rsa - sig

  the Encryption

  sha hash

  Group 2

  life 86400

  crypto ISAKMP policy 150

  preshared authentication

  the Encryption

  sha hash

  Group 2

  life 86400

  Telnet timeout 5

  SSH timeout 5

  Console timeout 0

  dhcpd outside auto_config

  !

  a basic threat threat detection

  Statistics-list of access threat detection

  no statistical threat detection tcp-interception

  SSL-trust outside ASDM_TrustPoint0 point

  WebVPN

  allow outside

  allow inside

  SVC disk0:/anyconnect-win-2.5.2014-k9.pkg 1 image

  enable SVC

  tunnel-group-list activate

  internal DefaultRAGroup group strategy

  attributes of Group Policy DefaultRAGroup

  value of 192.168.201.1 DNS server

  VPN-tunnel-Protocol svc webvpn

  Split-tunnel-policy tunnelspecified

  value of Split-tunnel-network-list DefaultRAGroup_splitTunnelAcl

  Cisco by default field value

  attributes of Group Policy DfltGrpPolicy

  Protocol-tunnel-VPN IPSec l2tp ipsec svc webvpn

  WebVPN

  SVC request enable

  internal KunduVPN group strategy

  attributes of Group Policy KunduVPN

  WINS server no

  value of 192.168.201.1 DNS server

  VPN-tunnel-Protocol svc webvpn

  Cisco by default field value

  username xxxx

  username xxxxx

  VPN-group-policy DfltGrpPolicy

  attributes global-tunnel-group DefaultRAGroup

  address VPNIP pool

  Group Policy - by default-DefaultRAGroup

  IPSec-attributes tunnel-group DefaultRAGroup

  pre-shared key *.

  tunnel-group DefaultRAGroup ppp-attributes

  ms-chap-v2 authentication

  type tunnel-group KunduVPN remote access

  attributes global-tunnel-group KunduVPN

  address (inside) VPNIP pool

  address pool KunduVPN

  authentication-server-group (inside) LOCAL

  Group Policy - by default-KunduVPN

  tunnel-group KunduVPN webvpn-attributes

  enable KunduVPN group-alias

  allow group-url https://68.191.xxx.xxx/KunduVPN

  !

  class-map inspection_default

  match default-inspection-traffic

  !

  !

  type of policy-card inspect dns preset_dns_map

  parameters

  maximum message length automatic of customer

  message-length maximum 512

  Policy-map global_policy

  class inspection_default

  inspect the preset_dns_map dns

  inspect the ftp

  inspect h323 h225

  inspect the h323 ras

  inspect the rsh

  inspect the rtsp

  inspect esmtp

  inspect sqlnet

  inspect the skinny

  inspect sunrpc

  inspect xdmcp

  inspect the sip

  inspect the netbios

  inspect the tftp

  Review the ip options

  !

  global service-policy global_policy

  context of prompt hostname

  no remote anonymous reporting call

  Cryptochecksum:c0e4540d4a07f2c544f0eddb653627cc

  : end

  don't allow no asdm history

  Hello

  What is the IP address of the hosts/servers LAN Gateway?

  If this is not the ASA 'inside' interface IP address then I assume that the problem with VPN is simply routing.

  For example, if your hosts/servers LAN wireless LAN gateway router then the following would happen to your Clients VPN connections.

  • Forms of customers login VPN users through configuring wireless routers static PAT (Port Forward) to interface "inside" ASA
  • Client VPN sends traffic through the VPN to ASA and again the host of the server or LAN.
  • Host/server LAN sees the connection from a network other than the LAN (192.168.202.0/24) and therefore to forward traffic to the default gateway that would likely be the wireless router.
  • Wireless router has no route to the network 192.168.202.0/24 (VPN Pool) and therefore uses its default route to the external network to forward traffic.
  • Client VPN host never received the traffic back as transmitted sound on the external network and abandoned by the ISP

  So if the above assumption is correct, then you would at least need a configuration of the road on the wireless router that tells the device to transfer traffic to the network 192.168.202.0/24 to the 192.168.201.200 gateway IP address (which is the SAA)

  I would like to know if the installation is as described above.

  -Jouni