New 5 Ghz PCI wireless adapter for dv9438ca?

Similar Questions

• Model wireless adapter for HP Pavilion 15

  Hello

  I need to buy a wireless adapter for my HP Pavilion Notebook of 15 and I would like to know the company, the model and configuration of the same.

  HP has an online store in the United Kingdom where I can purchase this item?

  Details of the laptop:

  Model: HP Pavilion 15

  Processor: AMD 5750 APU A10

  RAM: 8 GB

  Graphics card: AMD Radeon HD 8650 + 8600 M

  HARD DRIVE: 1 TB

  Motherboard: 1983 01.15

  System BIOS: F.33

  OS: Windows 8.1

  Thank you

  Hi @Metal_Head,.

  Shows that you are connected to a network that is not identified with limited capabilities.

  To troubleshoot the wireless, you will need to remove the Ethernet cable.

  If you right click on the Network Center and sharing, disconnect the connection you and connect to your router.

  Thank you.

• Wireless adapter for Thinkpad R61I

  Hello

  I have a laptop Lenovo Thinkpad R 61i bought in India.

  I wanted to know if I can install a wireless to this machine to use adapter.

  If the answer is Yes, then please suggest me that make recommendations and the model of the wireless adapter for buy.

  Any help would be appreciated.

  Hey guys,.

  Well, finally it seemed to have sorted the issue myself. After both to investigate and navigate the lenovo site, I decided to tear down the laptop.

  I mean remove the foot screws and check what the question was... I locate the Wifi adapter that came with the machine and took note of the brand and the model.

  After that the hunt for the pilot Bernard who took hours but finally a 246 MB file was found on the lenovo site and after installing BOOM I my work wireless as never before.

  However I place an order online for an internal wireless adapter that encrypted on INR 1662, a waste that I'm trying to cancel.

  in any case its all fixed now and the need to go wireless... Well done to everyone who helped with this problem.

  Good bye...

  The India Anil

• Which card wireless adapter for Compaq Presario model # SR5510F?

  I have a HP Compaq Presario model #SR5510F and I want to connect wireless to an AT & T 2-Cable Modem.  I need to know what wireless adapter card works for this model.  Thanks in advance.

  Message edited by morrow on 11/19/2009 05:54

  Which wireless standard using the ATT solution? Any spare wireless card should work fine, just for the game to the network.

  See you soon,.

• Wireless adapter for X 22?

  I would add a wireless adapter to a 22 X I just picked up. It would be for general use i.e. wireless broadband home network (8 MB/s max nominally, usually ~5.5MB/s) outside on the hotspots wireless etc. It's going to be a return until a R61i, which is my main PC (2.5 GB RAM, 400 GB HARD drive upgrade) and will be used as a laptop ' netbook coffeeshop and throw in the backpack ").

  The 22 X is 800 mhz CPU, 384 MB RAM, 30 GB HARD drive.

  People recommend a CF card? PCMCIA? I guess that I need spec 801g and not 801b?

  Thanks for any advice.

  Thank you very much for the advice - what is very useful.

  Dave

• USB wireless adapter for computer laptop problem

  Hello:

  The HP laptop with XP get "Low" signal every time I'm in the other room that is not too much longer off the router, about 60 to 70 feet away from him.  Then, yesterday, I got USB Netgear adapter in the hope of trying to get more signal.  Because, says a guy in the store of the computer installation USB adapter is 'boost' to get decent and more signals.

  When I installed the Netgear adapter for the laptop, there is no signal at all and to appear the following message appears in the middle of the screen.

  NETGEAR 111v3 Smart Wizard, WEP Passphrase to create WG and the key manually

  My question is;

  How to install the USB Netgear adapter for laptop?

  Thank you for your help in advance.

  Hello

  The general idea that a USB adapter is a bit a booster dose is false. I'm not sure that you will get the USB Ant thing you don't get the laptop.

  According to the physical environment, 60 to 70 domestic feet with walls is probably beyond the capacity of the wireless router.

  As for your specific question, it seems that USB is correctly installed but must adjust its password security to your current wireless network.

  In general.

  My wireless is not working - http://www.ezlan.net/wireless.html

  Basic wireless configuration - http://www.ezlan.net/Wireless_Config.html

  Wireless Security - http://www.ezlan.net/Wireless_Security.html

  Extending remote - http://www.ezlan.net/Distance.html

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• Question about the USB wireless adapter for Windows XP

  I'm trying to set up a wireless connection for my desktop pc with Windows XP. I don't see any options for a wireless connection. A USB adapter would do the trick? Looks like the easiest option.

  For a desktop computer with Windows XP, there was probably no built-in wireless card. Some systems Windows XP later had these as optional.

  You must meet your Dell model.

  A USB dongle should work, but make sure there is a Windows XP driver on the suppliers Web site before you buy. Windows XP has reached its end of life and is no longer supported by Dell or, more importantly, Microsoft. Be careful with the continued use of Windows XP, especially if the connection to the internet.

  You can install the unofficial service pack 4 before you connect to the internet which will help a little:

  

• wireless adapter for hp printer?

  should what wireless adapter I buy for my deskjet d4360 to connect it to my wireless network?

  Hi rczhpprinter,

  This printer does not have a wireless adapter. See the following link for printers that are wireless. Let me know if you need assistance.

  http://www.shopping.hp.com/webapp/shopping/can.do?storeName=storefronts&landing=printer&category=HP&orderflow=1&a1=Wireless+capability%0D%0A&v1=Yes&catLevel=2#bcAnchor&jumpID=in_R329_prodexp/hhoslp/ipg/lateralnav_wireless_all_printers_home

• Built-in wireless adapter for Compaq 6710 b

  Hello
  
  I want to upgrade the internet wireless card in a Compaq 6710 b to use a Wireless N card.
  
  However, I tried before and it wouldn't start so therefore, I would like to know if it is even capable of such a thing.

  I want to upgrade to Intel WiFi Link 5300 adapter, but I would like to know if it is compatible or not?
  
  If not, can you tell me some compatible models.

  Thank you

  Thanks for the reply,

  441530-001 will work in a United Kingdom 6710 b?

• Wireless adapter for Windows 7 on 15-e180nr

  Recently, I switched from Windows 8 for Windows 7 Home Premium (64-bit) on my Pavilion and finds it difficult to get the driver for the adapter wireless for it. System recovery is not good, and I've already tried three different drivers:

  sp54972, sp57538 and sp56154.

  The problem is when I go into devices to see the network map, information is "unknown", so I have no idea of what the manufacturer-specific device / I'm still in trouble. Can someone help me figure out what driver to use? I got the ethernet, but really need wireless work.

  Model: 15-E180NR
  Product: E8B21UAR #ABA

  OS: Windows 7 Home Premium 64-bit

  Thank you!

  Hello:

  According to the list of parts below...

  http://PartSurfer.HP.com/search.aspx?SearchText=E8B21UAR

  You need this card wireless driver...

  http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3DswItem%253Dob_134477_1&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

• Card of inserted PCI wireless adapter = no start

  Hello

  I bought a new computer - with no OS installed.  AMDA10 - 6600K.  Motherboard is FM2-A55M-E33.  When the computer has been delivered, I disconnected the original HARD disk and attached a new SSD instead.  I then install Windows 7 from scratch.  Everything worked well.
  Then I tried to install a PCI card.  Tenda W311P +.  When I rebooted, nothing happened.  No BIOS, no nothing.  So I took out the card.  Everything starts as usual.  I think it has something to do with the Secure Boot, but I don't know how to fix it.
  In my BIOS screen, I can 'turn on Windows 8 features.  This opens a secure start menu.  If I disable Secure Boot (default option) and nothing else change my computer does not start.  If I choose 'activate' told me that CMS is in place and I need to turn off in Setup, but there is no menu CMS.  (I have a boot option that chooses between the legacy + UEFI, or just UEFI).
  If I reboot have lit features Windows 8 but disabling Secure Boot, the computer will switch to the "shell" (by default in the start menu) or the CD/DVD drive.
  I don't know there is something simple, I need to do to allow me to install this PCI card, just do not know what.
  Tomorrow, I'm cables to allow me to attach my SSD and the original of the motherboard (am a SATA II cable down at the moment) so it will be interesting to see if card motherboard/BIOS default settings allow me to run both drives.
  In the meantime, any ideas on how to get this installed PCI card and a computer started upward would be great!

  Thank you very much for your help and your new year wishes - that I offer you too!

  I managed to solve this problem by:
  -Activation of Windows 8 features in the BIOS (with secure boot disabled), then turn off
  -Insert my PCI card
  -Reboot into BIOS
  -Then turning off Windows 8 features
  - Then restart
  Already insert the PCI card not has not even me can access BIOS.  But it's a motherboard made for UEFI (I think!), so you have to convince firstly I really want to insert the card!
  Thanks again.

• Identification card wireless adapter for computer laptop v6308ca

  Hello... I have laptop HP Pavilion dv6308ca... p/n: GA218UA #ABL. What is the exact type of the card on this laptop wireless? I would try to replace this card but I need to know the exact type. Thank you

  HP Pavilion DV6308 AMD Turion 64 X 2 TL - 50 1.6 GHz 1 GB 120 GB DVD±R 15.4 "WXGA LAN Firewire GeForce Go 6150 XP PRO sp3
  Laptop HP Pavilion dv6308ca... p/n: GA218UA #ABL

  This is the WLAN card that you have on your laptop...

  Mini PCI 802. 11b / g HS embedded LAN (WLAN) card wireless with Bluetooth (Broadcom, most of the world)

  It of my resource, please click here...

• LaserJet 1022: Wireless adapter for 1022?

  Is there an adapter to allow printing wireless with a 1022?

  According to the user's Guide here the 1022n and 1022nw built in wireless. http://support.HP.com/us-en/product/HP-LaserJet-1000-Printer-series/439424/model/439431/manuals

• -SOLVED! -PCI or USB wireless adapter is disabled and will not activate on Windows 7

  The solution: uninstall ZoneAlarm!

  I spent 3 days and 3 different cards, trying to solve this problem. First of all, I bought a Netgear PCI wireless adapter. Installed according to the instructions. Device Manager showed the adapter works properly but turned off and nothing I tried would enable the adapter.

  NETGEAR has taken over to the store and buy a Linksys PCI wireless adapter. Exactly the same problem. Device Manager, said the adapter worked correctly, but turned off and would not turn on.

  So I called Linksys support and paid them only for the remote service and they couldn't get it to work either (of course to return money). They suggest is to contact Microsoft technical support or buy the USB version.

  I went and picked up the USB (WUSB600-N v.2) version today and guess what? Exactly the same problem. Device Manager showed the device works correctly, but turned off and would not turn on. After talking to a few other technicians in addition to myself, we agreed that the only other option was to reinstall windows. But just before I decided to do, I checked one last time to Google and came across a post in the forums of Vista by someone who had the same exact problem, uninstalled ZoneAlarm and then worked their wireless adapter.

  Well, I decided to try that before reinstalling windows. As soon as I uninstalled ZoneAlarm and the computer restarts, the adapter has been activated and automatically found my network! This means that ZoneAlarm control network on the computer and for some reason cards some not allowing a wireless adapter is enabled.

  Then I tried to re-setup of ZoneAlarm. After that I have re-installed, my wireless adapter became instantly disabled and would not turn on again. So I uninstalled ZoneAlarm at all times. My router has SPI and NAT firewall on top of the Windows Firewall, so I need anyway ZA.

  If you have ZoneAlarm, get rid of it. If you still experience the problem of your card activating Wireless does not and have ZoneAlarm, try to uninstall any firewall software 3rd - party that you have already installed (not the Windows Firewall).

  I was really frustrated after spending 3 days with 3 different adapters and many trips to stores using the adapters and buy different cards. I'm glad I found this post on the forums of Vista, so the credit goes to the one who made this post.

  On a side note, after I installed the drivers from the CD and Linksys site, Windows update has shown there is an updated driver on the site of Ralink which I installed it and so far no problem. My WUSB600-N automatically connected to the strip of the 5 GHz on my router dual band and speeds are ultra fast and signal is strong in a completely different room.

  Hope this information helps others finally solve this problem.

  See you soon,.

  Matt

  64-bit, but it should work on either. ZoneAlarm includes network connections and was not what allows the adapter to be activated. Even close ZoneAlarm does not work either. ZoneAlarm must be uninstalled from the card must be activated.

  Vista drivers work fine with this adapter. Then a Windows Update is the updated drivers for Ralink which also work very well.

  If you have properly installed the drivers and display device manager the device works correctly, but disabled, and then uninstall any firewall/antivirus 3 rd-party should do the trick.

  I am a tech, more I consulted other technicians as well as paid for technical support of Linksys and nobody could understand this problem and it's no wonder. Who would have thought that ZoneAlarm or any 3rd part antivirus/firewall software would take complete control over network connections and not to allow a new network adapters must be installed correctly.

  If anyone needs any help other than that, feel free to ask.

• Cannot connect Stor.E Wireless Adapter + 1 TB HDD in my laptop

  I recently bought a Stor.e wireless adapter for use with my partner Stor.e 1 TB HDD laptop but I can't seem to connect to my laptop.

  If I plug the HARD drive directly into my laptop everything appears also ok but if I connect via the wireless adapter that shows nothing. the instructions that come with the adapter are very poor, but after following the instructions stating "plug drive HARD adapter using the USB cable then plug taken adapter (AC power), the LED flashes of HARD drive and the lights on the wireless adapter showing 1, 2 green, solid = power, wireless = 3 green, strong." USB = blue.

  The disc shows hard on my Android phone and the android Tablet but won't connect, when you perform a scan for wireless on my laptop devices, the adapter cannot be found.

  I sent twice, the support from Toshiba on July 5 and July 10, but have not received the courtesy of a response although confirmation of receipt of my e-mail, so for them we will get back to you in the DAY a statement.

  ANY help with this problem would be highly appreciated.
  Thanks in advance.

  Hello

  Stor.E WLan adapter extends a USB HDD with the ability to access data stored via a WLan connection.
  This means that you must activate your WLan on your laptop and configure the Stor.E WLan adapter first.

  The 3 LEDS have the following meaning:
  Above 1 LED is on / off and lights up green if the adapter is running
  The LED 2 is WiFi link and turns green where wi - fi access has been established.
  The 3rd (first from the bottom) lights up blue when the HARD drive is mounted. Flashing LED means read/write mode.

  How to connect?
  Connect adapter to Canvio Stor.E WLan adapt to the B USB 2.0 (near the reset button) microphone connector and connect the USB HDD to the type A USB 2.0 connector.

  You will need to activate the laptop s Wlan and press the reset button (hold it long 4 sec). The Wireless settings, you should see the Canvio Stor.E open wireless card that you connect access point.

  Then, in the Web browser using IP address: "http://198.168.65.1" to access the settings page of the Canvio Stor.E wireless adapter.

  In the preview, you can see the current version of the firmware, storage devices, network access point information.

  The list of devices shows detailed information on connected devices.
  Within the network, you can find the devault sotre.e wireless adapter network settings

  Now, you can use an Android application called Toshiba Wireless Adapter to move files on the HARD drive connected to the WiFi adapter from your smartphone.

  You can also map the card wifi as a network drive in Windows system.
  In type of Explorer: \\198.168.65.1. then right-click and choose map network drive.
  In a new window, select the application letter to the new drive (Z) and click the Finish button.