New chassis ucs to the existing environment

Similar Questions

• Error adding new CAP3702I-B of the existing controller

  Need of advice and direction. I am relatively new to the world of Cisco WLC, but I know the basics.

  We have a 5508 running 7.6.130.0.

  I have 11 of CAP2702I and LAP1142N 18. It is great to all workers.

  We just bought a bunch of AIR-CAP3702I-B I think I can just plug these and they'll autoconfig, right? I look at the CLI through the console and see mistakes like the capwap process tries to work. "The big East"download of this version is not allowed when the access point is configured at the domain - B."

  Best I can tell, I need to update the WLC software, but I'm afraid I might lose support for older WAP with the latest version of the software. True?

  Thank you!

  -John O

  As you have discovered an upgrade is needed to support the new B - regulatory field, which means that you need at least 8.0.132.0.

  In general, you have reason to be concerned by the older APs are no longer supported, so always check the compatibility matrix before the upgrade:

  http://www.Cisco.com/c/en/us/TD/docs/wireless/compatibility/matrix/Compa...

  In your case, even the last 8.3 supports still APs 2700 and 1140, so you should be good there.

  Make sure your 5508 has appropriate licenses to support additional access points.  If you plug in your switch it has configured the same (e.g., trunk) as the existing access points and your discovery method WLC is compatible (option DHCP 43 or other), it should associate.

• Download Acrobat new subscription will eliminate the existing Acrobat files?

  Hello world

  I am a member of the University faculty who had Acrobat installed on my work computer from home. A student this term plagiarized a document and visiting the paper mill, that paper was plagiarized from, my computer has been infected by a virus. Ultimately this made it necessary to install most software Dell systems drive in my computer. However clearly Dell reinstalled a somewhat different membership Adobe Acrobat during the repair process. I used to be able to edit my PDF files directly from the document without having to export to Word (for example). I need it for my work, so I clicked on the option 'subscribe to this feature' on one of my existing PDF files. I learned shortly that I am committed to pay $19.99 / month for the privilege to edit my PDF files in any mode. However, when I try to do anything - I'm unable to change the text.

  Most likely it is for the reason that I have not clicked a button somewhere that says 'download software' now (for my 'new' subscription). But I'm worried: I have a lot of existing Acrobat files that are essential to my life on my computer (even though I can't change an any of them now!). If I download my "new subscription"), what will happen to my existing files? If I have the existing version of Acrobat, and try to download a new, will be for this purpose (for example replace) my existing files? Sorry to sound paranoid and perhaps naïve but given my experience above, maybe you will understand. Can anyone help?

  Topics9

  Thanks for your reply. I discovered that the new subscription download do not erase my files. Thank you

  C.

• Questions about adding a NAS to the existing environment

  Hello

  We have an existing deployment of VI with an EMC SAN and three ESX host.  We would like to add additional storage to NAS and storage ISO tests.  To do this, we were going to set up a RHEL 5 server, as others on the forum have done and use NFS to provide a data store for ESX.  However, I have some questions that I found only partial answers on the forum.

  (1) is there a performance by adding NAS on the network of IP storage for the existing deployment of VI?  Our EMC SAN uses iSCSI to provide a storage boxes currently.  Mix iSCSI and NFS on the IP storage networking a bad idea to turn performance and stability?  Anyone done this?  Looks like a logical thing to do that many small deployments may not afford to buy company for test/development equipment and storage ISO.

  (2) what are the security implications of placing an NFS server on Red Hat-based IP storage network?  How to do this safely?  All posts of forum and documentation of security seem to focus on the need to separate the traffic of IP storage (which is clear text) to run virtual machines or physical servers.  In order to add the NAS on the network of storage, we allow access to the Red Hat server for IP storage network.

  (3) is there a way to limit the traffic on the network interface facing the storage over IP to NFS network only?  We would be two interfaces on the server Red Hat to fight against it, as our network of IP storage is not returned to the other networks in some way.  It is an isolated network by design, for security reasons.  Thus, we would need an interface connected to the stroage and one IP network that is connected to one of our management systems.

  Thank you.  I appreciate your help.

  James

  Hello

  I can understand a problem of pure load.  What I meant is there at - it a greater load on the servers simply having to use two different storage (NFS and iSCSI) protocols?  Or is it better to use iSCSI on the storage of test/development device so that we only configuring and using a storage Protocol?

  There is some overhead in the vmkernel, but it is also to be expected.

  I think that it is at the heart of the case.  I don't use a full OS is the way to go for me.  I'm really a Windows administrator and my knowledge of Red Hat is somewhat lacking.  On this basis, it may be preferable to use a storage OS like Openfiler or NexentaStor.  Do you have an opinion on which one is more stable or efficient?

  Openfiler is Linux or FreeBSD. I still have to examine in detail, but in both cases, they are both complete BONES. Openfiler is much easier to use, however, and will be iSCSI or NFS. If it were me, and I didn't know anything about Linux, I'd use Openfiler.

  VMs allows access to the storage indirectly however ESX.

  Great, so he can participate in your existing IP storage network.  Configure web access (management) to Openfiler being on the same network as for existing SAN management application. Then have your data on the IP storage network.

  Best regards

  Edward L. Haletky

  VMware communities user moderator

  ====

  Author of the book "VMWare ESX Server in the enterprise: planning and securing virtualization servers, Copyright 2008 Pearson Education.»

  Blue gears and SearchVMware Pro Articles: http://www.astroarch.com/wiki/index.php/Blog_Roll

  Security Virtualization top of page links: http://www.astroarch.com/wiki/index.php/Top_Virtualization_Security_Links

• New iPhone synchronize with the existing iTunes account?

  I just bought a new iPhone 6 and they (Verizon) took all the Info off my current iPhone 5 and added to the new phone, contacts, calendar, e-mail...

  I synced my iPhone per day for iTunes using Outlook for calendar and Contacts.

  I made from my old phone to iTunes Cloud backup before you perform the switch but normally sync locally to my PC.

  Now, I want to synchronize my iPhone 6s with existing iTunes account.

  All I have to do differently or just sync as usual.

  Your PC will detect that this iPhone is 'new' and your phone will ask if trust you him.

  After that, restore from a previous backup should work without problem. It will replace all current data on your phone... i.e.: new photos, etc.

  You can use the backup to iCloud as well, but it's requires firstly, erase your phone and use the internet to get your data back. Usually much slower.

• How to open push a new screen and pop the existing one?

  Hello

  Let's say I'm on A screen and I press a button to load the screen B. What is the best way to load screen B and remove the screen has?

  In other words, there are many cases in which I have to open, or push, a new screen and I want to close or pop, the pre-existing one. I tried to do this in two ways, but I keep getting errors.

  Thank you!

  Hello

  have you tried with

  UiApplication.getUiApplication () .popScreen (activeScreen);

  UiApplication.getUiApplication () .pushScreen (nextscreen);

  Please use the option "search" in this forum. you will get a lot a lot of samples on this topic.
  

• Add the new disk group to the existing group

  Hello world

  I have a Dell T310 server with a PERC 6 controller. My current setup is:

  Disk 0-1 TB

  1-1 TB drive

  Players above are mirrored and partitioned the drive C and D.

  The first problem I have is the drive C: is 40GB (from the factory) and is running out of disk space.

  I bought 2 2 TB drives and was hoping to install readers, their mirror and more 1 TB disks and use the disks of 2 TB as the new D: - I would image current data on D for new readers.

  I have installed 2 new readers (2.0 TB), but when I go into the settings of the raid controller I am only able to assign spare readers?

  Can someone please let me know what I am doing wrong?

  I already have a full backup of the server.

  Thank you.

  CSFD

  Start CTRL-R, VD MGMT, highlight the controller in the left upper corner, F2, Create/New. (Don't forget to select advanced options and Initialize boxes.)

• Manage the existing environment of vCAC

  If I already have a few VMs in vCenter that those who are not deployed by vCAC then manage them using vCAC?

  Yes, you can do it all.

  You will need to go to the organizer of the Infrastructure and discover existing virtual machine after which you will be able to manage using vCAC.

  Here is a link to the documentation for your reference.

  vCloud Automation Center Documentation Center

• New layers appear under the existing default layers

  I have no idea how the behavior has changed, but the new layers and new paths, new pasted objects, everything THAT appeared at the bottom of the order object in any layer. The default is for the new item to be on top and that's how I prefer it. I don't know how he's changed, but I can't seem to find any help online to find a way to put it back. This doesn't seem to be the kind of option, most people speak.

  http://forums.Adobe.com/thread/911103?TSTART=0

• Do new bkd color behind the existing shadow

  Hello

  I have several photos as the joint where I want to change the background to a gray clear so that there is a contrast between the envelope and the background. I would also maintain the shade and do not have to recreate it. Is there a good way to do it? So far if I have selected some of the shadow (in addition to the envelope) on a photo like that and then changed the background, it seems not homogeneous. Any suggestions? Thank you!

  

  If you have not flattened the psd file just change the color of the background. What if all you have is a flat JPEG. You have to recreate the PSD. Use the pen tool or a polygon to select the envelope only do not include the shadow. Followed by copying to a paste. This will create a layer 1 envelope. Add a layer style to this layer which reproduces the shade below and he rushes.  Select the background layer and fill it with the color gray desired. Save a JPEG and psd. I added a grey layer between the bottom layer and layer 1 to preserve your original image. You will need to play with the layer style settings.

  

  

• NFS share for one (1) added when adding to a new host in the existing data center

  I'm sure it's a simple answer, but I've been beating my head on the wall, trying to find a solution. The scenario is as follows:

  1 Vcenter has several hosts in different groups. All built at the same time with a NFS share that is shared among all.

  2. I add a new host to the data center (I tried independently and also added to a cluster as well).

  3. the new host sees its local disk as a data store, as expected, but I have to add the shared NFS datastore.

  4. at the level of the host, I go to configuration-storage-add storage and the NFS share.

  It shows and normal with NFS (1) as the name. I can't rename it as it says THAT NFS already exist. I understand that there are in the vcenter DB, but how to add this new host or host an existing environment and maintain the name of the NFS share? vCenter 5.5, 5.5 esxi

  Thanks for your help

  Neil

  finally found the problem,

  the mounting data store I used FQDN.domain.com /Datashare

  I needed to use the FULL domain. DOMAIN.COM /Datashare

  Plugs in the name of area COMPLETE the variance in the symbolic name that caused the problem.

• How to change the existing settings of the source for the container system

  Hello
  
  Cannot change settings in the system container (Oracle 11.5.10) source source.
  
  Please guide me how to change the settings.
  
  Thank you and best regards,
  Partha.

  Partha, you should not change the current container. Create a new container by copying the existing container and make any changes required in the present.

• UCS connection to the existing network fabric

  Hello

  I'm trying to get some new equipment:

  2 - chassis with 4 blades of each

  2 6248UP

  1 - C240G - x 2 agile

  2 - 3750 x 10gig expansion.

  Currently, I have 3750's in a battery and intend to add these new 3750's existing battery. Can I connect the 10 g on the 3750 x directly to the fabric of interconnection to bring my new equipment into my existing network?  I thought that this would be considered UCS Uplink Ethernet Ports.

  The reason why I ask, I didn't know that I could not connect servers other than Cisco (IBM with 10 g cards) directly on the fabric and caused my second guess.

  Thank you.

  Hi mjensen

  Fabric interconnection ports are 10 GB interfaces, then Yes, you can connect to the Cisco 3750 Switch via 10Gig ports.   The only thing you want to make sure is that when plug you these devices in transceivers for use based on both ends. If you want to know the list of radios supported on the UCS 6248 take a look at the link below.

  Supported transceivers

  http://www.Cisco.com/c/en/us/TD/docs/unified_computing/UCS/HW/6200-insta...

  You're right about UCSM you want to configure these ports Uplink Ethernet ports!

  Now, the reason why you can not just plug another server ucs to the fabric of interconnection as you IBM server, because the interconnection of fabric does not work like a regular switch.   Only one UCS server can be managed via the GUI UCSM.

  Please let me know if it helps.

• Presentation of the existing database to a new machine

  I posted the question in the forum of DB and received no usable response, so I'll try this forum.
  I'm on Windows 2008 R2 x 64 platform.
  I installed a cluster of 11 GR 2 two starts for the OCR and voting disks and one for data.
  The data disks are replicated on external drives in the cluster.
  On a different node, is not part of the cluster I have installed the software from the grid.
  I seconded the diskgroup data nodes and attached the replicated to the new node.
  I installed the DB software (software option only).
  Now, I want to recognize and exploit the existing DB DB software.
  I can't find a way to do it.
  Any help is appreciated.
  Kind regards
  Fred

  Hello

  I seconded the diskgroup data nodes and attached the replicated to the new node.
  I installed the DB software (software option only).

  Configure the TNSNAMES file. ORA and SQLNET. ORA of two nodes.

  Now, I want to recognize and exploit the existing DB DB software.

  1. create directory audit_trail on each_node for example

  audit_file_dest          = %ORACLE_BASE%\admin\%ORACLE_UNIQUE_NAME%\adump)
  

  2 copy or re-create a file initfile and password on each node inside (% ORACLE_HOME%\database\) for example

  cat  initorcl2.ora
  SPFILE='+DATA/orcl/spfileorcl.ora'
  ...
  To create password file use utility %ORACLE_HOME%\bin\orapwd.exe
  filename must be  orapwd<$ORACLE_SID>
  

  3. add entries on TNSNAMES. ORA and SQLNET. Database ORA

  4 create Windows service for the Instance database with the ORADIM utility on each node:

  C:\> %ORACLE_HOME%/bin/ORADIM.exe -NEW -SID ORCL1 -INTPWD  -STARTMODE AUTO -PFILE %ORACLE_HOME%\DATABASE\INIT.ORA
  

  5. create the database configuration in the clusterware, through orders srvctl

  for example

  srvctl add database -d ORCL -o  c:\app\oracle\product\11.2\dbhome_1 -p +DATA/orcl/spfileorcl.ora -a  +DG_DATA -s open
  srvctl add instance -d ORCL -i ORCL1 -n hostname1
  srvctl add instance -d ORCL -i ORCL2 -n hostname2
  

  Kind regards
  Levi Pereira

  Published by: Levi Pereira on March 23, 2011 10:46 # changed with the appropriate procedure for the windows environment.

• I have message handler Firefox is already running but is not responding. To open a new window, you must first close the existing Firefox process, or restart your system. It is NOT open I onlly have a computer

  I installed FF on my new computer, Windows 7 Toshiba, I get the message Firefox is already running but is not responding. To open a new window, you must first close the existing Firefox process, or restart your system. It is NOT open I have only one computer.
  I had a computer scientist to try everything, and we cannot on it to open it.

  Search the firefox process firefox.exe and kill him with for example the Task Manager. It is also worth watching for the plugincontainer.exe.

  The problem and the solutions are explained in the articles:

  • Error message "Firefox is already running but is not responding" - how to fix
  • Firefox crashes or does not - how to fix