New color cartridge does not work

Similar Questions

• OfficeJet 5740: New genuine cartridge does not work

  I just bought a new ink a few hours there are the target. I played the installation video and proceeded to the installation of the new ink cartridge. Once I had finished the following pop-up came, "remove and install the specified cartridge, ensuring that it is completely installed, and then tap ok." I pulled out and put it back several times and still does not. I even reinstalled the old ink cartridge to see if it was something I was doing. It installed fine. Help, please!

  Thank you

  Hi, sorry to hear you're having this problem with your new HP power. If you still receive the message after several attempts of insertion of the new supply try to clean the electric contacts following the instructions of Solution 3 in this document support.

  If this does not resolve the issue try reset the printer (Solution 6 in the same document) and if this does not solve it yet take the offer to return to the store and get it replaced.

  Best.

• new black cartridge does not work. I have no error message, simply, it does not print in black.

  As noted above, the printer prints just black.  It is a new cartridge.  Not my first rodeo, I replaced the cartridge several times, so I don't know how to do it.  I get no error message.  When you check the ink level, he recorded as complete.    What is happening with this?

  Hi, for the Olympic GAMES of 6500 try the procedure described in the link below...

  http://support.HP.com/us-en/document/c01641815

  Otherwise, if the printer is out of warranty, one thing that might be worth a shot is to soak the printhead...

  (1) get a pan and put 1/2 "of very hot (not boiling) water in the bottom.
  (2) remove all ink cartridges, then remove the print head Assembly.
  (3) gently put the printhead nozzles down in water and soak for 5 minutes.
  (4) remove the print head and gently dry the electrical contacts.
  (5) replace the print head in the printer and then reinstall the ink cartridges.

  http://h30434.www3.HP.com/T5/Ink-toner-cartridge-printhead-issues/HP-6500-Office-Jet-E709a-black-printer-cartridge-HP-920-not/m-p/447545#M36315

• HP Officejet Pro 8500: New color cartridges do not work

  I have the model A909a. It was working fine until I replaced the old ink cartridges. Since I put in the new, black works well enough, the magenta works occasionally and work of yellow or cyan at all. They are not expired. I tried all the troubleshooting suggestions. Align the print heads not on either. I ran the function of print head cleaning, print head alignment function and calibration. Nothing works. The color ink levels are declining, but I certainly don't know where he's going.

  I hope you can help.

  Hello

  As you have tried cleaning print head, the question could be the print head.

  You may need to replace the printhead (cyan/magenta or yellow/black)

  Click HERE to check what printhead needs to be replaced.

  Buy print HEAD connect to www.hp.com/go/suresupply

• Branch HP4500 black new ink cartridge does not work

  I have the HP Officejet 4500 series printer. When I repaled branch HP 901 black cartridge is new, the alignment page went without black, undetected illustrated message text. I went through all the step to check the ink level, to clean the print head, troubleshooting... .but was frustrated. The b & w document print at all. Please advice. Thank you very much.

  What is the warranty ends on the day on the cartridge? (AAAA/MM/JJ) If it is under warranty I had advice contact our telephone support HP...

  

• New iPhone IS does not work with MAC Mini 10.6.8. Apple support says upgrade your iTunes. Its the wrong color icon. WHAT? iTunes is the last 11.4 for my mac. All my music is on my Mac. Help!

  New iPhone IS does not work with MAC Mini 10.6.8. Apple support says upgrade your iTunes. Its the wrong color icon. WHAT? iTunes is the last 11.4 for my mac. All my music is on my Mac. Help!

  That is right. The requires iTunes 12.3.3 and in order to get it, you will need to update OS X to El Capitan. That's how Apple has created for better or worse, I'm sorry.

• New ink cartridges do not work

  I inherited a printer HP Deskjet 3070, which has already been used. I bought new ink cartridges, but when trying to install these has received the error message that I need to use the cartridges of the establishment to assess the ink levels and once this is done can change for the new cartridges.

  Unfortunately, the printer cartridges comes with do not seem to be setting up those and now the printer accept the original or the new.

  Does anyone know how I can go forward - it doesn't seem to be any problem with the printer?

  Hi @LorieB,

  Welcome to the HP Forums!

  I see that your new ink cartridges do not work with your HP Deskjet 3070. I'm happy to help with this problem!

  I would like to recommend please call our telephone support to the 800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number. Language-country selector.

  Good luck!

• The new tab key does not work.

  The new tab key does not work when I click it. I reinstalled FF but with no luck - any suggestions would be appreciated.

  What can a problem with the Ask.com toolbar (Tools > Modules > Extensions)

  See:

  • Troubleshoot extensions, themes, and issues of hardware acceleration to resolve common problems of Firefox

• The button create a new paragraph style does not work for me, is this a bug or something stupid I did?

  The button create a new paragraph style does not work for me, is this a bug or something stupid I did?

  Pages on El Capitan 10.11.1 v5.6.1.

  I just created a quote indented using ITC Garamond Book Italic with left and right margins altered. Well selected, I clicked on the + symbol in the paragraph, named the new Styles pop-up style Indented quote and you press return.

  Always selected in the body of the document, I applied the body paragraph Style to restore the normal formatting and then with the text again, the paragraph of citation Style indented - who worked as expected.

  If you want that your new Style of paragraph to survive across documents, you will need to save it in a model. You can also have two different Pages, documents open in Pages v5.6.1, and copy/paste the custom styles between the selected text in these documents by using the Format menu.

• my color resolution does not work can you tell me how to fix it?

  Hi my color resolution does not work its blurry can you tell me how to fix it? Ty

  Hello Andrea,

  First, what operating system are you using?

  Second, how many time that there a problem?

  Was anything changed on your system before to happen began?

  Finally, you have the latest updated drivers for your video card?

  Eddie B.

• Color picker does not work in Windows media player 11

  color picker does not work. The frame color is red and there is no way to change.
  I tried with uninstall and re install, however the problem still exists.

  It seems that your WMP is in skin Mode. You can switch to full mode CTRL + 1 or Ctrl + M in WMP.

• I have an Acer Aspire laptop with Windows 7. I have a problem. My "new folder" button does not work.

  I have an Acer Aspire laptop with Windows 7.  I have a problem.  My "new folder" button does not work when I am on a page blank and do a right click on the page I get only breifcase and no new folder option. How can I fix?

  See this thread and respond to Bruce Hagen.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-files/Hi-Im-having-a-problem-creating-folders/621c5cd4-29ac-4549-a80b-4f78fe3917aa

• HP PSC 1315xi - clean print cartridge does not work, does nothing

  I have a HP PSC 1315xi All in One.  I have just stalled new ink cartridges.  I was able to line up, but I noticed on the impression that black was not feeling right.  I printed a test page by holding the Cancel button and pushing the color copy button to start.  Print out showed that there certainly is a problem with the black cartridge.  So I went in the Toolbox and I clicked to clean cartridges.  I clicked on Clean and nothing happened.  The printer did nothing and he didn't pop up or anything to show, there was a problem.  I waited 5 minutes and still nothing.  I'm on Win 7 Home Premium 64-bit.  Thank you.

  The application of the Toolbox cannot communicate with the printer. Try the following:

  (1) unplug the PC printer by unplugging the USB cable into the PC end.

  (2) turn off the printer and the PC.

  (3) wait 30 seconds and turn on the printer, then on PC.

  (4) when the PC is starting for office, connect the USB cable.

  Now, open the Toolbox printer and check if the option clean cartridge works.

  If this does not work:

  (1) you are able to check the Toolbox ink levels?

  (2) you see the digital imaging monitor icon in the box at the bottom right of the taskbar on your computer screen?

• MS Paint "fill with color" tool does not work. :(

  In the painting, my "fill with color" tool (the pouring paint can) does not work. I click on the box, I click on a different color, the icon changes to the can, but when I click on a space as say an empty circle, it doesn't do anything. Right click, nothing, left click, nothing.

  I noticed that the only thing he is able to do is to change a solid color that I did (as a solid black rectangle) in a different color, but only once. If I rectangle black color green, I can't change it to any other color after. I don't know what is happening.

  I am not edit a photo or anything btw, I start a new painting from scratch file. I'm trying just to circles of color and enclosed spaces. I've done this dozens of times with no problems. I tried restarting the computer and paint without effect.

  Thanks for any help!

  In the painting, my "fill with color" tool (the pouring paint can) does not work. I click on the box, I click on a different color, the icon changes to the can, but when I click on a space as say an empty circle, it doesn't do anything. Right click, nothing, left click, nothing.

  I noticed that the only thing he is able to do is to change a solid color that I did (as a solid black rectangle) in a different color, but only once. If I rectangle black color green, I can't change it to any other color after. I don't know what is happening.

  I am not edit a photo or anything btw, I start a new painting from scratch file. I'm trying just to circles of color and enclosed spaces. I've done this dozens of times with no problems. I tried restarting the computer and paint without effect.

  Thanks for any help!

  Hé salés

  try to run the sfc/scannow command. to repair the corrupted system files

  http://support.Microsoft.com/kb/929833

  Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file. To do this, follow these steps:

  1. Open an elevated command prompt. To do this, click Start, click principally madeprograms, Accessories, right-click guest, and then click run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or clickallow.
  2. Type the following command and press ENTER:
     sfc/scannow

     The sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  Walter, the time zone traveller

• hp7525 new black ink does not work

  This is a new printer. I replaced the ink black sample with a new cartridge and it won't print.

  Hi, have you tried running print head cleaning? If this does not work, I would say to contact the HP support by phone that you need a replacement.

  Phone numbers

  http://welcome.HP.com/country/us/en/wwcontact_us.html

  Can you please let us know how you go?

  Thank you

  Ciara