New computer, Windows 7, my shortcut icon has stop working?

Similar Questions

• I opened PS3 and see a window "license for this product has stopped working". Help!

  I have the PS3.  A few months ago, I had an iMac 27 "10.11.2 opportunity and transferred my PS3 (plus any creative suite 3) top.  There was a window that says please register in 5 days or it will be inactive (or something like that). I did what I was supposed to do and have appreciated the help of PS3 on this new iMac.  Everything worked very well. Last night I shut down my computer before a separate software has been updated done and makes the iMac not able to start.  The only option I found was to erase the hard drive and install using Time Machine. (I use the bad terminalogy)   I did and everything was successful until I opened PS3 and see a window "license for this product has stopped working".  Help!  It is said one solution is to uninstall. When I went to the Adobe Uninstaller I saw NO PS3, but see icon with "Add or remove Adobe Creative Suite 3 Production Premium" with a small arrow, that I have the means to think his alias and I don't know where he lives. Can someone help me get back my PS3?  Thank you!

  Please stay on point and help me with my problem of PS3 and not encourage me to upgrade to what is current.  I have SP6 here, but want to keep the PS3 will.

  Thank you.

  Debbie

  Whenever you retrieve from a backup Time Machine, you will break licenses and need to run a repair. I know. I did it twice. As the instructions given in the doc to Adobe using own isn't enough for someone new to the procedure, I set up a screenshot guide.  Layout error 150:30 opening Photoshop cs4 on Macbook Pro

  If you go through this guide to screenshot and do exactly as indicated, you won't make those mistakes. Perhaps it would be good to read first. I carefully put in place this guide, my instructions are good in their current form, do not do anything else.

  In the first post #11, I forget to add a space after "sudo python" before you drag the licenserecovery.py to the command line, and I never load any type of break line or before you drag the script.

  Second: In #15 if you simply slide the script into the window, it will be on the same line.  What you see is the packing of command to work around the size of the window, but it is always on the same line and will run when you enter your password.

  You will also see that there is a space between "python" and the script in the screenshot.

  Again, if you are new to this, read first.

  Gene

• Windows Vista. Setup.exe has stopped working and I can't get the program to load.

  I have a Gateway laptop with Windows Vista.  I put Norton anti-virus on it last year.  Now I am trying to run the new disk of Norton and the computer tells me that setup.exe has stopped working and I can't run the program. Norton 2008 has been removed.

  http://Service1.Symantec.com/support/tsgeninfo.nsf/docid/2005033108162039

  Download/run their abovelink Norton Uninstall tool to ensure that all "Norton" is deleted.

  Then, right-click on the setup.exe Norton > run as admin.

  If the above does not help:

  http://www.Symantec.com/en/AU/Norton/support/index.jsp

  Contact the Norton Support for problems with their software.

  See you soon. Mick Murphy - Microsoft partner

• Several months ago the button, if that's what it's called, the task bar that displays hidden icons has stopped working.

  Original title: the task bar icons

  Several months ago the button, if that's what it's called, the task bar that displays hidden icons has stopped working. Can I get a virtual device driver format in the registry is incorrect when you use a disk with the drivers on this subject. I found information on how to correct this problem and now the botton of task bar work again although it works until the computer is used for a while. How is the hidden icon button suppose to work or it should be visible all the time? Also the virtual device driver registry entry has something to do with it? I think that the problem of the DMV has installed a Norton program antivirus software that was on a disc that came with the computer.

  Hello

  1 have had any changes made to your computer before this problem?

  I suggest you try the methods mentioned below and check if it helps:

   

  Method 1:

  You can also scan your computer the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malicious software.

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Hope this information is useful.

   

• Every 10 minutes, I get a popup window of Microsoft Windows error: Dell Support Center has stopped working

  Every 10 minutes, I get a popup window of Microsoft Windows error: Dell Support Center has stopped working. A problem caused the blocking of the program works correctly. Windows will close the program and notify you if a solution is available.

  I uninstalled Dell Support Center via the Control Panel, run the virus and malware scans installed a restore of a month before this problem point and continues.

  Hello

  Dell has their own Forums of Support for you to enquire about Dell software issues.

  http://en.community.Dell.com/support-forums/default.aspx

  See you soon.

• Weird black/window box after commissioning; "Explorer has stopped working". Error messages; Do not click on some things in the start menu; several McAfee icons in the lower sidebar...

  Where oh where can I start?  When I start the computer, my office is always in the background, but there is a pop up looking for black box thing.  There are no long enough for me to read what it says.  Something about system/Windows32 (not full title), then past to something else, even once too fast to read, disappears.  Then a window that says;

  • Online: 223
  • Char: 2
  • Error: 1% is not not valid Win32 SENSITIVITY
  • Code: 0
  • URL: file:///C:/Program%20files/PeoplePC/ISP3700/HTA/station.brt

  There is an option to run a 'this page with a script' or something to that effect.  If I choose Yes or no is not serious.

  Under this window is another

  "Runtime error!"

  Program:C:\ProgramFilesCyberLink\PowerDVDDXL\PDVPDXSrv.exe

  Application has requested the execution in an unusual way.

  On my sidebar on the right low in McAfee Ms red with white background icons, many of them until I sweep (no click) with the cursor.  They will disappear after the scanning, but then return.

  When I click on Explorer or the window will Flash quickly on and outside, or should I get the message "Windows Explorer has stopped working".

  I can get on explore if I disable all add-ons.  But it won't let me check yahoo IND. e-mail messages.

  When I try to go to things in the start menu that look like we can help him, I'll either get the error messages or off quick flashes of a window.  When I went into Control Panel, nothing happens when I click on the icons.

  When I went into the System Configuration. then click on services there are things that say that they are arrested.

  In its responses, please explain things as you explain to a 60 year old grandmother.

  Hello Halima S,.

  Thank you for your response.  I was checking things until I found your answer.  Do not be alerted via hotmail.  Somewhere in my files McAfee "View Log" I found that I was 'ping '.  What is crazy?  In the files for seven times in a row from 09:30-09:34 "SystemGuards have allowed a moment change on your computer."  Should I try to mess with this before that I have use the above tips or try your advice first?

  Ping, means that your mcafee dat files are up-to-date and also it cannot be updated no more. so try to update your antivrius manually by downlading latest mcafee dat files and also try runing mcafee!

  Take a look at this:

  http://community.McAfee.com/message/91863

• I get a window to the beginning u saying that my IASTOR ICON has stopped working

  I have a HP ENVY 14 t s/n p/n XB110AV [removed for privacy]

  I get a small window to the beginning upward who say IASTOR ICON CEASES to OPERATE.  What is it? and how to fix it?

  If you meet him IAStorIcon has stopped working error, it is related to the Intel Rapid Storage Technology driver.

  You will need to reinstall: http://support.hp.com/us-en/document/c03315222

• Satellite A500 - NVDIDA Windows driver in kernel mode has stopped working

  I bought a brand new Satellite A500-1GL with a Geforce GT 330 M graphics card. Unfortunately, whenever I watch videos in full screen I get the following error.
  "Display Driver NVIDIA Windows Kernel Mode Driver Version 188.29 has stopped working and has recovered"

  The screen turns white and the sound terribly false. I have already uninstalled and reinstalled the Nvidia drivers. It seems that all A500-1GL models with faulty chipset on the motherboard. Toshiba must investigate this matter!

  Help, please

  Hello

  The videos you watch exactly? This happens with all the videos, for example Youtube, DVD, or only with specific files?

  I also GT330M graphics card in my phone but I can t notice any problem with him. I m using the version preinstalled Windows from Toshiba and the last driver display Toshiba official page.
  And you should try updating the BIOS

  Finally and most importantly, another user reported that he could solve the problem if Windows Aero is disabled:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=51367

  Check this box!

• Windows Audio device Graph Isolation has stopped working and was closed.

  I am running Windows Vista Ultimate 32 bit. My volume on the system tray icon has an 'X' on it, and when I mouse over it it says "audio service does not work." When I right click on it, the open Volume mixer is grayed out and unclickable. When I get my audio settings / sounds an error pops up saying "Windows audio service is impossible. You want to allow it? "I click on Yes and then he said: 'Windows Audio Graph insulation has stopped working and was closed. »

  the error report is:

  Signature of the problem «»
  Problem event name: APPCRASH
  Application name: AUDIODG. EXE
  Application version: 6.0.6001.18000
  Application timestamp: 47919284
  Fault Module name: AUDIODG. EXE
  Fault Module Version: 6.0.6001.18000
  Timestamp of Module error: 47919284
  Exception code: c0000005
  Exception Offset: c 000070 0
  OS version: 6.0.6001.2.1.0.256.6
  Locale ID: 1033
  Information additional 1:3502
  More information 2: a465924573e02e7dbf28b31e7ea12c28
  Additional information 3: a4b
  Additional information 4: 91409072175cd5a219bdca7388005249

  Additional information about the problem
  Bucket ID: 932674242 "

  This is on a DELL XPS M1710
  I uninstalled the driver and reinstalled, uninstalled the device itself and not reinstalled, no change.

  No software installation seemed promt it.

  What are my options?

  deafinhum,
  If you run the utility from the Vista DVD System File Checker, it will extract the files it needs to turn off the DVD to replace those damaged.  If this does not work, you will need to do a repair of your Vista installation.

  Here is an article to help you with the repair process.  Please let us know if you need more assistance.

  http://support.Microsoft.com/kb/936212

  Thank you
  Gloria
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Flash doesn't work is not on the computer, the error: "Flash 11.5 has stopped working".

  Original title: Flash Player 11.5

  I use Firefox as my operating system. I have updated Flash Player to 11.5 but it kept crashing so I uninstalled and went back to version 10.5. Since then every time I get a Web site that uses flash Player my posts computer 11.5 has stopped working and it is close and looking for a solution to the problem. These message windows continue to flow upward and I can't close them and it prevent my computer answering commands.
  I don't understand that I do not even have the software on my computer no more.
  Can someone please?

  Download and use the program to uninstall Flash Player from Adobe, it should get rid of the last vestage of 11.5

  http://helpx.Adobe.com/Flash-Player/KB/uninstall-Flash-Player-Windows.html

  J W Stuart: http://www.pagestart.com

• I'm putting a game on my computer and repeat me setup.exe has stopped working

  I'm loading Jewel quest games on my computer.  Whenever I start a window appears which says setup.exe has stopped working - please help if anyone has any ideas to try

  Hi shellyart,

  ·         What is the exact error message?

  ·         Have you made changes on the computer before this problem?

  ·         What version of Jewel Quest you trying to install?

  Follow these methods.

  Method 1: Run the game as administrator.

  http://Windows.Microsoft.com/en-us/Windows-Vista/how-do-I-allow-an-application-to-run-once-with-a-full-administrator-access-token-in-UAC

  Method 2: You can also try the game in compatibility mode and check if it works very well.

  http://Windows.Microsoft.com/en-us/Windows-Vista/make-older-programs-run-in-this-version-of-Windows

  Method 3: Perform a clean boot to see if there is a conflict of software like the clean boot helps eliminate software conflicts.

  Note: After the boot minimum troubleshooting steps, follow step 7 in the link to return the computer to a Normal startupmode.

  For reference:

  Quest http://www.Microsoft.com/Windows/Compatibility/Windows-Vista/Search.aspx?type=Software&s=Jewel

  http://Windows.Microsoft.com/en-us/Windows-Vista/how-do-I-mark-an-application-to-always-require-a-full-administrator-access-token-user-account-control

  http://Windows.Microsoft.com/en-us/Windows-Vista/Troubleshoot-installing-or-uninstalling-programs

• Windows Mail no longer works and I get a pop up window telling me that it has stopped working.

  My Windows mail no longer works... it opens and then tells me that it has stopped working... it is highlighted on the Inbox. I have Panda Security but the scan of mail turned off. All started having this problem. Running Vista Home
  Thank you Jacquie

  original title: Windows Mail has stopped working

  There are extreme measures you can take.  One is either movement store the content of the message to another directory and WinMail starts it will be a clean message store (or you can simply rename the directory from the old Windows Mail message store and then create a new directory named Windows Mail which will begin to empty).  The other is to back up the registry key to Winmail (see www.oehelp.com/backup.aspx#wm) and then remove it and then start WinMail and who must rebuild the registry key.  The first allows to compensate for a corrupt message store (you can use the file |) Import | Messages into the plu message store you renamed) and the second allows to compensate for a corrupted under the WinMail key registry hive.  I suspect the first manoeuvre will fix the problem, but I don't know.

  But those who are basically last stations.  I would like to save things before you do anything that anyone else.

  Steve

• By connecting to the Dell Vista computer, get error "ST Service Scheduling has stopped working"

  When I log on my Del computer, a window opens informing me that 'ST Service Scheduling has stopped working".  What is cosuing this problem?

  * original title - message * "ST Service Scheduling has stopped working".

  Hello

  1 have you planned any task at startup?

  2 - is a task scheduler Windows or any third party planner?

  3. have you made any hardware changes or software on the computer before this problem?

  I suggest you to follow the steps below and check if it helps:

  Make sure that the Task Scheduler service is running correctly.

  1. click on Start, type services.msc, press ENTER, and then click Services.

  2. double-click on the service.

  3. click on the general tab, verify that the service has not been disabled in the Startup Type box. If Yes, click Automatic to start when you start the computer.

   

  Hope this information is useful.

• "When I try to load the game Empire Total War I have a Microsoft window error ' Empire: Total War has stopped working"

  Original title: when I try to load the game Empire Total War I have a Microsoft window error

  Empire: Total War has stopped working

  A problem caused the blocking of the program works correctly. Windows will close the program and notify you if a solution is available.
  But when I do updates on the game and it still shows the error on the Microsoft Windows error. Also, when he is on the main site of most of the people have problems on this game I noticed just last night so can you help me and I have try all the sites to see if it works try reinstalling it and what I think.

  Hello

  1 did you recent hardware or software changes to your computer before this problem?
  2 have you tried the troubleshooting steps to solve the problem?

  I suggest you try the steps and check them off below.

  Step 1: Update the video card driver.
  Reference:
  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly
  http://Windows.Microsoft.com/en-us/Windows-Vista/update-drivers-recommended-links

  Step 2: Download and install the latest version of DirectX.

  Reference:
  How to download and install DirectX
  http://support.Microsoft.com/kb/179113

  Step 3: Check if the problem persists in the clean boot state.

  Put your boot system helps determine if third-party applications or startup items are causing the problem.

  Try the procedure described in step 1 in the section below to put your computer in clean boot mode.

  http://support.Microsoft.com/kb/929135

  Step 4: Also, look for error messages in the event viewer. If you find error messages after return the exact error message so that we can help you better.

  Measures to check the application event log:

  a. Click Start.
  (b) in the search box type eventvwr.msc, and then on enter.
  c. now, click Application in the event viewer (local).
  d. now, looking for event log on the right side of the event viewer window.

  http://Windows.Microsoft.com/en-us/Windows-Vista/open-Event-Viewer
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-information-appears-in-event-logs-Event-Viewer

  You can also try contacting the seller game to help on this issue.
  http://forums.Sega.com/

  I hope this helps.

• "windows host process RUNDLL 32 has stopped working" I ran the cleaning disc etc. without success. Help, please!

  Internet explore and Incredimail has stopped working after power failure with the following error message "windows WHAT RUNDLL 32 host process has stopped working. I ran the cleaning disc etc. without success. Help, please!

  Hello

  try a restore of the system before this happened

  http://www.windowsvistauserguide.com/system_restore.htm

  If necessary do in safe mode

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.