New Deskjet 3054 AIO will not print

Hello! I just got my new printer yesterday, and I for the life of me can't seem to print correctly.

Is the printer with that I have a problem my Deskjet 3054 AIO and I am working on a PC running Windows 7.

It printed the page alignment without problem and the fine prints when using Mircosoft Word 2003, but the problem comes when I try to print in other programs.

In Photoshop CS3, when I try to print something, it overwrites the preview image before printing and when I print it out it comes out tiny and confined to a corner of the page.

Also, when I try to print something from Mircosoft Office Picture Manager, the printer immediately gives me the message "error - printing".

Help, please! And thank you for your time!

D

It seems that there is a problem with your printer drivers; You can try their update by downloading this: http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=al-85606-3&cc=us&dlc=en&lc=en&os=4063&product=5109847&sw_lang=

Also, since Adobe uses its own drivers for printing, you can check the updates/patches for Photoshop CS3 as well.

Tags: HP Printers

Similar Questions

  • HP Photosmart Premium Fax all-in-One Printer-C309a-new black ink cartridge will not print

    I just installed a new black cartridge (made by HP) what print quality became poor in the middle of a job.  He completed the job just fine, but when I tried to print later, the parts of the document that are in color/black and white will be printed.  Black is simply absent from the document.  the level of supply shows as thin and all the diagnostics indicate that there is no probem.  I have not received the error messages.  I tried to turn the printer power switch.  I tried to clean the print heads.  I tried to uninstall & reinstall the cartridge.  I do not have the black cartridges extra to try to see if that does not solve the problem, but as stated above, it worked at first.  I have just printed on ordinary regular white printer paper.  I tried all the relevant measures in the troubleshooting document of poor mailed print quality HP elsewhere on this page.  nothing worked!  another post mentioned someone resetting the printer, but did not say how it was done.  any ideas on a solution? Thank you!

    To reset the printer, follow these steps:

    While the unit is turned on, remove the power cord at the back of the printer. Wait at least 30 seconds, then plug the power cord to the back of the printer, then turn on the device. That will complement a power reset.

    Now, lack of black printing can be the result of a number of things. If it's only missing say when printing from Word, then print settings in Word are set to grayscale only (or something similar) which would exclude the black cartridge. If all programs, so it's either the main print in grayscale settings only the value or the cartridge/print head is blocked to the top/Sales. If this isn't the print settings, then create a report of print quality and follow the steps described in this document:

    http://support.HP.com/us-en/document/c01624986

  • New 9.3 installation will not print, save me only file

    I recently updated Windows XP to my parents at Adobe 9.3 machine and now PDF files does not print on their connected USB HP4100.  Other documents continue to print without problem.  When I select "Print" to a pdf file, the print window opens successfully and I can choose all the normal print options.  When I click on "OK" the next thing that happens, is that a new window will open with the message "Print to File" and I am asked for a file name and given the option to select "Save".

    How can I print these PDF files?

    In the Adobe Reader print dialog box disable the entry "print to file".

  • 4615 Deskjet ink advantage will not print in black

    Hello

    I replaced the black cartridge about a week ago and it worked fine until today.  The printer indicates that the cartridge is full. Today used out in the middle of a print, and will not return. I tried all the procedures of cleaning recommended by HP without success. I also checked that the vent is not blocked.

    Operating system: Win 7, 32 bit

    Warranty expired dec 2013

    Suggestions, how can I would be welcome

    Hi arifle,

    Take a look at the troubleshooting document following the link:

    OfficeJet 4610 / 4620:

    http://support.HP.com/us-en/document/c03944809

    I suggest you read solution 3 downwards.  You have already entered through solutions 1 & 2.

    If none of this works, then it would probably be a good idea to contact the HP support in your region.  Here is a link to the contact numbers:

    http://welcome.HP.com/country/us/en/wwcontact_us.html

    I hope this helps.

  • Photosmart 5514: Photosmart 5514 - new black ink cartridge will not print

    I just replaced all 4 ink cartridges (new cartridges of HP).  Each color prints fine except the black.  Not a spot of ink is crossing.  I removed, checked and reinsert the cartridge several times.  I check the contacts, clean them by following the instructions in the troubleshooting guide.  I've run the cleanup tool and quality report several times each.  Still nothing.  The printer is only a couple of years, out of warranty, but I don't have any problems with it so far.  Is there anything else I can try before I have to throw this printer?

    For anyone who is having the same problem: I continued to try to understand this problem because I didn't have to buy a new printer.  I finally found a solution after trying everything that previously mentioned.  HP never really gave me any solution.

    On the touch screen of the printer, go to Setup, then Preferences.  Do scroll to the chip in cartridge information and change it to Off.  Now my black ink prints!

    I don't know if it will work on other printer models, but it worked on mine.

  • HP Officejet 4500 - new black ink cartridge will not print

    I just replaced a depleted with a new cartridge, HP 901 black ink cartridge and the black has completely ceased to print.  I installed a new color cartridge and it seems ok.  I cleaned the printheads several times to nothing does not.  Can someone help me?  My OS is Windows 7.

    Well, I don't know why, but the printer started working normally again.  I had turned if off for about one day and decided to try one last time before junking it and don't be, you know, it worked!  After turning on the printer, I printed a 'State' of the control panel of the printer page and - no problem.  Then I tried to print documents from my laptop and still - no problem.  I guess only time will tell if the problem is actually solved, so I'm keeping my fingers crossed.  Lisa, I hope that the demon decides to leave your printer as well.  Good luck!

  • Printers HP Officejet Pro 8630: new HP Officejet Pro will not print

    Printer is set up to print wireless (network) and that shows all is well (wireless network-wise) but the print job stays in queue for a few seconds and then goes away... but no impression is made.

    Hi @JonathanWhite.

    Welcome to the Forums of HP's Support. I understand that print jobs disappear from the print queue. I would like to help.

    Normally this problem can be solved by running the HP print and Scan doctor.. Give it a run.

    If you have any questions, or if this does not resolve the problem, let me know.
    If it solves your problem, please click acceptable Solution. This will allow other people with the same problem the solution easily. If you want to say thank you, feel free to click on the laurels.

  • New 351 tricolor cartridge will not print Yellow or mix for green

    I am using Windows 7 64 bit

    My printer is an all-in-one Photosmart C4580

    No error message

    I tried to use the HP Digital Imaging Monitor but it is not installed.

    I tried to know where download and install one but cannot uinderstand where to buy.

    The problem is that I don't seem to be able to make green.  Also the yellow seems to be missing.

    The cartridge is new.

    Can you recommend something and give me a URL where I can download and install the imaging monitor?

    Thank you very much

    Best wishes

    Sky

    Hi Sky,

    You can take a look at a video that I'm a link so that you can check your system for the digital imaging monitor and activate it if possible.  Video

    If you need to download the software, you can find here.

    Before you get too involved in the end of the printing software, I suggest that you make sure that you don't have a hardware problem.  If you make a color photocopy of something that has green inside, the Green comes out?  If this isn't the case, you must be a hardware problem.  I would not spend time on the software until the hardware problem is resolved.  Let me know how it goes.

  • HP7520/AIO: Will not print on 3 x 5 cards

    It's a bit different from the other problems with the printing of the photo tray.

    The printer works fine with 5 x 7 or 4 x 6 cards or photo paper and the photo tray, but when I select 3 x 5 cards and the photo tray, I get a message that there is a conflict and it gets switched to the main tray. I looks as if the printer or driver has no adapter 3 x 5 even if it is in the selection list. It does not matter if Ielect "Plain paper" or "Photo paper" in the menu.  It's Win8.1/64 bit and MS/WORD Office 2010.

    OldSooner

    Welcome to the Community Forum of HP.

    You could try the following:

    Remove the paper from the regular bin, paste the files in the lower plate - carefully roll over this tenacious bar from left to right to move upwards next to the map.  The bar moves, way-wau, although it is fragile and difficult to move. Be careful with him.

    Adjust the printing preferences

    tab paper / quality

    Paper source > main tray

    Paper size > card 3 X 5

    Media > matte matte Greeting Card OR a Brochure

    Reference:

    Printing options

    Click on the thumbs-up Kudos to say thank you!

    And... Click on accept as Solution when my answer provides a fix or a workaround!

    I am happy to provide assistance on behalf of HP. I do not work for HP.

  • My printer hp deskjet 2500 series will not print PDF

    I just installed my printer yesterday and finally managed to print on my laptop with my ubs agreement. However, I tried to print a document to PDF file today and my printer does that emit a noise, then the print job disappears off my computer. I don't have an error message and I don't know what the problem is. Does anyone have an idea?

    Hi Eaweber,

    Thank you for your answer!

    I'm sorry, I meant, can you print from Notepad?

    In this way we can know if it's a driver problem or a software related issue.

    I hope to hear from you and have a nice day!

  • DeskJet 940c: new 78xl cartridge will not print on Deskjet 940c

    bought 78xl tricolor cartridge.  Have only used the 78 before regular.  New cartridge will not print.  Replaced by the old cartridge - printed perfectly.  When I opened the printer, the cartridges for the little happy face moving, I have not a clue as to what is happening.  I would simply return this cartridge?  The 78xl is compatible with the 940 c?  15 black continues to print well.

    ARGHHHH.  Help, please...

    Hey @JaniBee ,

    Yes I recommend you return the faulty new cartridge and replace it! If you buy the new cartridge and it fails well then let me know and we can look at the printer and excludes a faulty cartridge error.

    Get back to me and let me know! Have a great day and a wonderful holiday season!

  • Computer Vista will not print to Deskjet 930c on home network

    Our three computers (Vista is A, B, and C are XP) are connected to a wired network of private home.  Computer A has a Canon printer that is shared and all 3 computers can print to that very well.  Recently, we re-gasket a printer HP DeskJet 930C to computer B (via USB) and shared.  Computers, B and C can be printed on the HP very well.

    But, even if A computer can see the printer, it will not print.  He seems to accept the print command and sometimes a dialog box flashes on and so quickly as it cannot be read, but nothing prints.

    I worked through the Microsoft article "File and sharing printers in Windows Vista" at http://technet.microsoft.com/en-us/library/bb727037.aspx#mainSection and you don't see anything that solves the problem.  I ran the doctor of printing & scanning HP and who wrote the 930C is installed but not connected.  According to the website of HP, Vista has the correct driver.  I have uninstalled and installed the printer from computer A, but it still does not work.

    So I called HP Support, and they said that I had done all the right things, and "it must be a registry problem.  This seems unlikely to me, and I don't know where to look in the registry.

    Any ideas or solutions?

    Hello

    Windows XP sharing can be done automatically in XP or operating systems, XP does not host the drivers for the newer Vista operating systems and so you will have problems with some models.

    To manually add the shared printer, follow these steps:

    1. install the printer locally in following second method: connecting the cable in parallel below:

    http://support.HP.com/us-en/document/c01655752

    2. go into your PC host (computer B), right click my computer and select Properties.

    Find the name of computer on this screen.

    3. go in Control Panel > printers and faxes.

    Right-click on the printer and select Properties.

    Open the tab end hand note the share name

    Note: I would say keeping the name of sharing as simple as possible (e.g., 930C)

    4. go to your Vista machine and open Control Panel > printers.

    Click with the right button on the 930c configured in step 1 and select Properties.

    Open the Ports tab.

    Click Add a new port.

    In this list, select Local Port.

    Set the local port in the form of \\Computer B Name\Printer share name (for example \\PC-P\930c).

    Confirm the changes and check any change.

    If you have still any question, I would say that the printer is connected to the Vista machine, then share it with the XP PC and check for any changes that should run more easily from my experience.

    Shlomi

  • New Photosmart 5520 will not print in black

    I have a new HP Photosmart 5520 printer all-in-one.  Black ink ran out so I replaced it with a previously used ink cartridge which is of the same type # 564 but a XL version.  This cartridge has been barely used.  Now, I just can't get anything to print in black.  It will print in color, but not black.  I tried to turn off the printer.  I put the cartridge in my printer and it worked fine.  What should I do?

    edgarlogcabin wrote:

    my printer hp 5520 will not print black

    The in the here document troubleshooting steps may help resolve problems with black not not printing on your Photosmart 5520.  Especially make sure to check the events as on the Six Solution.

  • My new printer will not print on my Quicken reconcile report. It prints my program Word and e-mail very well.

    My new printer will not print on my Quicken reconcile report.  It prints my program Word and e-mail very well

    If I understand correctly your new printer (brand and model, please) is properly installed on your computer (version of Windows and the service pack, please), but does not print Quicken (version, please) reconciliation report.

    Without more information (such as an error message or description of what happens when you try to print), it sounds like all you need to do is to set up Quicken to use the new printer.  The following is for 2011 Quicken, but should be the same or similar for all recent versions of Quicken:

    Click file > printer setup > for reports/charts
    In the window that opens, select your new printer using the drop-down list.  You should keep the default margins and fonts.  Click OK and you should be good to go.

  • Re: HP Deskjet 3520 - will not print black text

    Re: HP Deskjet 3520 - will not print black text

    so frustrating piece [language edited by moderator]

    Hi @Jaaanosik

    Please use the following document to solve the problem. Printer cannot print black ink or color ink, or prints blank Pages.

    If the problem persists, I would call you HP regardless of your warranty status. The number of call HP is 1-800-474-6836 for the Canada and the United States, or you can Contact HP worldwide.

Maybe you are looking for