New GoPro camera need help with rate of 240 fps for idle

Similar Questions

• Need help with the launching track pack for forza code 4

  Bought new Forza 4 and the lancer Track Pack code does not work, how do I get a code that is generated in the form I've already paid for it. Rank of loads of numbers and sent 10 s of emails but cant seem to get help.
  
  This is the help I get when the cat to an Ambassador xbox on xbox.com
  
  Terry wrote:
  Need help with the launching track pack for forza code 4
  The Xbox Ambassador says:
  Location of Ambassador of the community...
  The Xbox Ambassador says:
  Location of Ambassador of the community...
  The Xbox Ambassador says:
  Your question will be answered by an Ambassador of the Xbox. You have been connected to the Ambassador as a user Xbox [3]
  The Xbox Ambassador says:
  Hello
  Terry wrote:
  Hello
  The Xbox Ambassador says:
  Hey
  Terry wrote:
  just to be on the phone to xbox live support and was told to come here
  The Xbox Ambassador says:
  ok\
  The Xbox Ambassador says:
  What is your problem?
  Terry wrote:
  I bought the 4 for forza ansd 360 new sealed Christmas...
  Terry wrote:
  has got 2 codes that accompanies the game but the pack track code does not work
  The Xbox Ambassador says:
  Wow good
  Terry wrote:
  whenever I put in the code it says code redeemed
  The Xbox Ambassador says:
  I think the code is used. You must return to the retailer
  Terry wrote:
  I tried to, but since I already opened the case they will not accept
  The Xbox Ambassador says:
  Oh. No,
  Terry wrote:
  the code had been used or defective as I am the only person who has touched the game once opened, tried to enter the code when it is open
  The Xbox Ambassador says:
  Maybe it was auto bought?
  Terry wrote:
  so, how do I get another code generated track Pack if defective?
  The Xbox Ambassador says:
  I do not know.
  Terry wrote:
  bought the game new, so I get the track pack
  The Xbox Ambassador says:
  Oh. It's bad.
  The Xbox Ambassador says:
  I think that if you Exchange 1 code it will buy it
  Terry wrote:
  car pack code worked, starter pack did not work
  The Xbox Ambassador says:
  Oh.
  The Xbox Ambassador says:
  It's a bad
  The Xbox Ambassador says:
  BTW you have an evolution of the tests?
  Terry wrote:
  Yes, I want to? but more anxious to get a code object generated for this pack
  The Xbox Ambassador says:
  Hey if I help can u give me this game too?
  Terry wrote:
  ?????????????????
  Terry wrote:
  So is it possible to get a code for that time?
  The Xbox Ambassador says:
  Hey
  The Xbox Ambassador says:
  Yes.
  The Xbox Ambassador says:
  you need to contact them
  The Xbox Ambassador says:
  and tell them that the code is used.
  Terry wrote:
  I was told to come here? where can I go to get the code?

  Hi Terryg76,

  ·         What version of the operating system is installed on the computer?

  I suggest you to contact the game manufacturer for more help and information.

• New to VMWare, need help with my setup

  Hi everyone, I'm trying to run a specific installation to a laboratory at the House and I'm stuck. at this point I don't know if this is even possible. I have a virtual running Windows server 2012 and a Win7 machine empty. What I need to do, is be able to pxe boot the empty machine since the 2012 server which is running WDS. The service is running, and check all options out_ it is configured as a domain controller and operating dhcp options 60 and 67 correctly configured. Any network settings I try the vm vacuum does not pick up the file of pxe boot from the server... is this even possible or should I try a different product at this point?

  It will probably prove to something simple because I'm new on this but no amount of Googling has done for me so far. Thanks in advance for any help and suggestions!

  Hello

  Welcome to community work station!

  Practices of related laboratory PXE is supported by VMware Workstation. Here is an example for windows: VMWORSTATION 12 PRO, need driver of storage for MDT

  Some tips for the network configuration of your lab environment:

  1. use an independent VMnet for PXE service, DO NOT use bridged VMnet. And you would NOT use better VMnet NAT (aka VMnet8)

  How to:

  a. click on the menu "Edit"-> "Virtual Network Editor... workstation "to open the virtual network Editor.

  b. click on the "Edit settings" button, accept the UAC warning as appropriate.

  c. click on the button "add a network...". ».

  d. Select a new VMnet (I'll use VMnet2 for example), click on the OK"" button.

  e. click 'Apply' then 'OK' in the virtual network Editor dialog box.

  f. open the settings of your virtual machine VM

  g. Select the tab "Hardware"-> "Network card", this "connect to power on" is checked

  h. Select "Custom" and the VMnet you added

  i. click "OK" in the dialog box settings of VM

  j. Repeat step f through i for all your virtual machines

  2 disable DHCP this VMnet of Virtual Network Editor(Technical speaking, it's not necessary, just in case)

  How to:

  a. click on the menu "Edit"-> "Virtual Network Editor... workstation "to open the virtual network Editor.

  b. click on the "Edit settings" button, accept the UAC warning as appropriate.

  c. Select the VMnet you use for the PXE service

  d. uncheck 'Use local DHCP service to distribute IP addresses to virtual machines' option

  e. click 'Apply' then 'OK' in the virtual network Editor dialog box.

  It will be useful.

  Kind regards

  Shawn

• New on Adobe need help with an if then statement

  Hi, I really like what ADOBE Pro 9 can do with forms and neat and everything is included.

  I'm having a problem trying to understand an if then statement for one of my forms and how to make it executable.

  Here is what I have

  I.          Cigna Medical                                           

              (10)       single                                     $  44.00

              (11)       Employee & Child (ren)              $  82.00          

              (12)       Employee & Spouse                 $  99.00                      

              (13)       Family                                     $125.00                      

              (14)       Decline Coverage                         $0.00          Choice: _        Amount: $_

  An employee will be choice an optiopn 10-14 and but that number of choices. After I am about to fill with this number.

  For instnace, if an employee takes option 11, choice: 11 and amount: $ 44.00

  I put the options in a menu drop-down. The drop down menu is titled CignaMedical and Amount_1 title for amount: $_ and I made a text box.  I put this code: if (this.getField("CignaMedical").value == '10') {}
  Amount_1 = 44.00} tab calculation of properties for the Amount_1 of text box on the custom calculation script tab.

  Any help is greatly appreciate

  Yes, you can use an if-else if construction. Something like that (I got the first part because we reuse it):

  CignaMedical = this.getField("CignaMedical").value;

  If (CignaMedical == '10') {}

  44.00 = Event.Value;

  } Else if (CignaMedical == "11") {}

  Event.Value = 82.00;

  } Else if (CignaMedical == '12') {}

  99.00 = Event.Value;

  }

  etc.

• New to Mac - need help with iphoto

  Just bought a Mac in may, which has the OS X El Capitan. Try to use all the advantages of iPhoto (hope I have that correct name). I want to be able to organize and edit photos for most. Came from PC world and I'm certainly still appearing on my Mac. I've had an iPhone for years, so I understand a little of him, but still confused. Here are my questions:

  1. how to organize my photos in specific folders? I can see where they have been imported, but don't know how to get them into folders to organize based on the categories of events, customers, etc..

  2. If I want to be able to save them in iCloud, how can I check my settings to make sure that I have do this correctly? I would like to be able to access it on all my devices if possible (iPhone, Mac, iPad)

  3. If I remove them in one place, this means that they are deleted in the world? (May be a stupid question, but then again, I'm still learning.)

  Any help is appreciated. Thank you very much

  EGerdes

  As I showed you before, www.icloud said it's nothing for me to remove it. A person who is not honest. In addition, there is the fact that my address book has been consumed.

  El Capitan comes with pictures for Mac application. iPhoto was provided with older Macs.

  1. how to organize my photos in specific folders? I can see where they have been imported, but don't know how to get them into folders to organize based on the categories of events, customers, etc..

  Photos for Mac everything automatically organizes in Moments, the Collections, the years.

  • Times are including pictures taken at the same time in the same place.
  • Collections are grouping related moments
  • And the years view shows all photos taken in the same year.

  You can add the selection of photo albums and creating an album from them.

  And you can group pricing albums by moving them to the folder. Folders can be nested.

  See this help page: Help the Photos

  i.e. https://help.apple.com/photos/mac/1.0/?lang=en#/phtf677b8f5

• New on illustrator need help with gum

  I'm used to using gimp or photoshop, but recently received the new Illustrator. I am doing a logo 30 to 0 in a loop on the bottom of the 3. I can't seem to find a way to do it, I can't understand how the eraser do not work either. Whenever I have let go of the mouse color appears upwards... Any help?

  You mean like this?

  

  The easiest way is to position your characters as you wish, then use Pathfinder divide.

  Then you coulour parts that you want.

  See you in this example, the value 0 is divided into three sections. You can use Pathfinder unite on them if you wish.

  It goes same for the little background of the 3.

  I never use the gum even if I've been using Illie since it was invented. He always finds a useless tool.

• New to Ae, need help with time remapping (tutorial anywhere?)

  I am very very big thing back to Ae (CS4) and I was with Premiere Pro CS4 to edit a video, but I need to speed up, but as many of you may know, when you use time remapping in Pr, the sound isn't sync.  However when you do it in Ae, it does.  Then...

  What I'm trying to do is to let the clip I am going for a bit of editing time, then gradually increase the speed to 250% of the original over six seconds, stay 250% for some time, and then gradually in the course of about six seconds to 100% of the original speed.

  I'm kind of having trouble finding how to use Ae well.  There are a lot of easy to understand tutorials out there for Pr, but I can't really find any good for Ae.

  You use the time remapping effect. In fact, when you enable TR, you will notice that the duration of the layer is not limited to the original boundaries more. You can extend beyond the layer's original point.

  So, what you want to do is to keep the TR keyframe at the point layer zero to a value of zero. Set a keyframe second point 06:00 of the layer, with a value of about 14:00 (if possible, because maybe the original clip has no more of any material). You did it like that because if you show 14 seconds of video in a six-second segment, the playback speed is about 250 percent speed. You can do better than 'roughly', but this would require using the speed graph...

  For the real variable speed to set the first keyframe (that at 0:00) to perform a "easy ease on", so the speed ramps up gradually (what means "mitigation" for any property). Setting speed to 100% can be reached at justwith degree sense, but to familiarize themselves with the speed graph will make much more accurate. I say common sense, because if you have a keyframe of a code value of time from 14:00 to 06:00, then a possible way to get back to 100% is to show four seconds of material in the four seconds left (in condition, once again, that your source material has something to 18:00). As you can see, TR needs abundant "handles" (IE, additional documents in the source layer) to work at its 'best.

• New to AS3 needing help with the key

  OK Im a newb full when it comes to AS3.  Here's what I'm trying to accomplish, I try to make my link button to another page of mine and it loads into the central computer of the original source page.  I found some code to bind the button to a Web site or else my page, but it just opened another window and as previously indicated, I want it to load into the central computer, the button is in the left frame.  Any help would be great, here is the code I use to bind.

  aboutbtn.addEventListener (MouseEvent.MOUSE_DOWN, mouseDownHandler);
  function mouseDownHandler(event:MouseEvent):void {}
  navigateToURL (new URLRequest (". (("/ aboutus.htm '));
  }

  Thanks in advance for the help

  You beat me to it: Yes, it was the parenthesis.

• New to pix, need help with "debug access list of all the" command

  I have a pix 515 v6.3. I am tring to use then "debug access list of all the" command to see what traffic is stopped by my access list. However, I don't get any output. I turn execution of the command, but nothing happens. Other debug commands give the console. Perhaps, I do not understand what "debug to access list of all the" is used for. Any help that can be provided would be greatly appreciated.

  Tim

  Also try following the commands of logging

  LOGG on

  LOGG buff 7

  term Lun

  M.

• Need help with installing the driver Vista for Satellite A200-23U

  INSTALL THE

  WINDOWS VISTA
  N ° Version of the component name
  1 Windows Vista RTM
  2 native Intel ICH7M Chipset utility
  3 945GM Intel display driver
  or
  3 nVIDIA Display Driver G72MV-A3/NB7P-GS
  Realtek Audio driver ALC861D 4
  5 Realtek 8101E 10/100 / Driver LAN Gigabit 8111
  6 Synaptics Touch Pad Driver (with LuxPad)
  7 ALPS Touch Pad Driver
  8 card reader TI Multiple digital media
  9 TOSHIBA software modem
  10 Golan Intel Wireless LAN Driver
  11 Kedron Intel Wireless LAN Driver
  12 Atheros Wireless LAN Driver
  Camera Chicony 13 software
  14 Bluetooth Stack for Windows by Toshiba
  15 Bluetooth monitor
  16 TOSHIBA Value Added Package
  17 TOSHIBA Flash Cards Support utility
  TOSHIBA 18 hardware configuration utility
  19 TOSHIBA supervisor password
  20 TOSHIBA SD Memory utilities
  21 TOSHIBA ConfigFree
  22 TOSHIBA Assist
  TOSHIBA Speech System 23
  24 TOSHIBA Extended tiles for Mobility Center Windows V1.01
  TOSHIBA Fingerprint Utility V5.6.0.3221 25

  But the [code] http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp?service=EU&mode=allMachi nes & action = search & teddProduct = 738 & selShortMod = 532 [/ code] I don't know what connection is No2 chipset driver (I use vista 32 bit), similar what link is No3 display driver.

  Can you help me to download 25 entry because I'm bad at computing :(
  Sorry because of my English... THX

  Hey Buddy

  You have a machine with the ATI graphics card. Am I wrong?
  If Yes, then the Chipset driver is ALREADY included in the ATI graphics driver that is available on the European driver Toshiba page!

  The order of installation displays the instructions step by step for all THE portable Satellite A200 PSAE6E but the fact is that devices were equipped with different material parts and that's why some single drivers do not appear or are not available.

  Once again; Utility/driver chipset is available/included in the ATI graphics driver

  Good bye

• Need help with script java folder level for silent registration with unique file name

  That's what I'm trying to do

  1. when a person completes the request on one of our computers in the office, there will be a button send at the bottom of the application.

  2 submit the application on is automatically stored on the local server with the file name determined by the fields name and surname on the application.

  example - John Doe Application.pdf

  Saved in the folder C:\Users\Station1\Desktop\FinishedApplications

  3. This is the example of code I found, but I don't know how to enter which fields determine save name and where to save it to.

  http://thelivecycle.blogspot.de/2015/06/save-with-new-name-in-specified.html

  http://thelivecycle.blogspot.de/2015/06/save-with-new-name-in-specified.html http://thelivecycle.blogspot.com/2009/11/save-form-to-specific-directories-and.html

  Thank you!

  Lol this is the part that you need as a script to the folder level:

  var lcbSaveAs = app.trustedFunction (function (vDoc, vPath) {}

  app.beginPriv ();

  vDoc.saveAs ({cPath: vPath});

  app.endPriv ();

  });

  This is the code you use in your file:

  lcbSaveAs (, "/ C/users/specialisee1/Desktop/result /" + this.getField("FirstName").valueAsString + "" + this.getField("LastName").valueAsString + "Application.pdf");

  lcbSaveAs is the name of the function of trust.

  vDoc.saveAs is the Document object, call the saveAs method.

  I don't know what oDoc.SaveAs is, or where you got it.

• Need help with the site of Editions for a friend - Thnx

  Hello

  I recently got in creating websites so I am pretty new to this, Ive created a site for a friend with dreamweaver CS5 and it looks pretty awesome I also published the site using dreamweaver. Then a few weeks later, my friend started telling me to put new images etc. because it is not familiar with dreamweaver and guys its becomes a bit boring. I want him to be able to post pictures and texts on his own, but I do not know how, someone told me that other cms joomla. And the noob I am I couldn't understand oy what are these programs... Anyone has any advice, tutorials or something useful please share it with me.

  Thnx in andvance and sorry if spelling is a bit messy enlish is my 3rd language.

  Viktoriya El Madhoun wrote:

  I have a major in mathematics and science

  Huumm... he need more money both of those in the design of Web site.

  Viktoriya El Madhoun wrote:

  I plan to learn flash too, Whats ure opinion on flash, Ive been reading online and many people say it's a dying art? Should I learn, or just ignore it?

  As John says, I would not bother. Flash does not work on the iphone or the ipad is a reading in which direction he's going.

  The big money is to know a language like php/mysql server, so if you can get your head around those and combine it with your in-depth knowledge of html/css, it will give you a great competitive advantage.

  Many more customers now wonder for Web sites with a sort of interactivilty. To offer those you must know an inner language server outwards or you will be limited to base sites, which can produce zillions of others.

• Need help with upgrade from WXP MCE for Vista Ultimate on Qosmio G30 - 175

  Hi all, I tried to search for the problem following without success so I would be very grateful if someone could help and point me in the right direction:

  "Tried to upgrade XP to ultimate and he arrived at the stadium and BSOD unpacking" Session3_initialization_failed (xxx STOP: 0x0000006F (0xC000009D, 0x00000000, 0x00000000, 0x00000000) appeared several times.) I tried again and the same thing happened.

  I have already updated the BIOS and stripped the conflict out of the suite of Toshiba of programs and update Advisor gave the OK on several occasions before attempting this exercise.

  Help... Dave

  I forgot to mention also that I'm running with 2 x 2 GB of Ram and no software or additional material has been added before attempting the upgrade. The medium I use to upgrade is that a full version recently bought 32-bit Vista Ultimate (which also includes a 64-bit in the box version, too).

  I was in contact with Microsoft Support these days and they told me that my hard drive seems to be defective as the reason for the failure of the upgrade. Infact last week with Microsoft on the phone did us try a clean install, but that just lead to me having to give up the clean installs and rescue my laptop back to original XP MCE... flipping hell!

• Need help with the debugging of flash for survey email form script!

  Hi all

  I have a survey form .fla file I adapted a fedback form work. They use .asp to compile and send an email, but I can't work on why the survey form does not work. Anyone would be able to run on this script and tell me if there is anything wrong with it. I've been going on it again and again, but can not see something wrong!

  Question1. Text = question2.text = question3.text = question4.text = question5.text = question6.text = question7a.text = question7b.text = question7c.text = question7d.text = question7e.text = question7f.text = contact_message.text = age.text = business.text = contact_email.text = message_status.text = "";

  send_button.addEventListener (MouseEvent.Click, Submit);

  reset_button.addEventListener (MouseEvent.CLICK, reset);

  System.security.allowDomain ("localhost");

  var: timer;

  var var_load:URLLoader = new URLLoader;

  var URL_request:URLRequest = new URLRequest("mail.asp");

  URL_request. Method = URLRequestMethod.POST;

  function submit(e:MouseEvent):void

  {

  If (question1.text == "" |) Question2.text == ' | Question3. Text == ' | question4. Text == ' | question5. Text == ' | question6. Text == ' |          question7a. Text == ' | question7b. Text == ' | question7c. Text == ' | question7d. Text == ' | question7e. Text == ' | question7f. Text == ' | contact_message. Text == ' | Age.Text == ' | "Business.Text == ' | contact_email. Text == "")

  {

  MESSAGE_ERROR. Text = "* fill all fields!";

  }

  else if (! validate_email (contact_email.text))

  {

  MESSAGE_ERROR. Text = "* Invalid Email!";

  }

  on the other

  {

  MESSAGE_ERROR. Text = "";

  message_status. Text = "Send"... » ;

  var email_data:String = '& question1 =' + question1.text

  + '& question2 =' + question2.text

  + '& question3 =' + question3.text

  + '& question4 =' + question4.text

  + '& question5 =' + question5.text

  + '& question6 =' + question6.text

  + '& question7a =' + question7a.text

  + '& question7b =' + question7b.text

  + '& question7c =' + question7c.text

  + '& question7d =' + question7d.text

  + '& question7e =' + question7e.text

  + '& question7f =' + question7f.text

  + '& message =' + contact_message.text

  + "& age =" + age.text

  + ' & company = "+ business.text

  + '& email =' + contact_email.text;

  var URL_vars:URLVariables = new URLVariables (email_data);

  URL_vars. DataFormat = URLLoaderDataFormat.TEXT;

  URL_request. Data = URL_vars;

  var_load. Load (URL_request);

  var_load.addEventListener (Event.COMPLETE, receive_response);

  }

  }

  function reset(e:MouseEvent):void

  {

  Question1. Text = question2.text = question3.text = question4.text = question5.text = question6.text = question7a.text = question7b.text = question7c.text = question7d.text = question7e.text = question7f.text = contact_message.text = age.text = business.text = contact_email.text = message_status.text = "";

  }

  function validate_email(s:String):Boolean

  {

  var p:RegExp = /(\w|[_.\-])+@((\w|-)+\.) + \w{2,4} +;

  var r: Object = p.exec (s);

  If (r is nothing)

  {

  Returns false;

  }

  Returns true;

  }

  function receive_response(e:Event):void

  {

  var loader: URLLoader = URLLoader (e.target);

  var email_status = new URLVariables (loader.data) .resposta;

  If (email_status is "Yes")

  {

  message_status. Text = "thank you for your comments. We will be in touch shortly. « ;

  Timer = new Timer (500);

  timer.addEventListener (TimerEvent.TIMER, on_timer);

  Timer.Start ();

  }

  on the other

  {

  MESSAGE_ERROR. Text = "Message send didn t!"

  }

  }

  function on_timer(te:TimerEvent):void

  {

  If (timer.currentCount > = 5)

  {

  Question1. Text = question2.text = question3.text = question4.text = question5.text = question6.text = question7a.text = question7b.text = question7c.text = question7d.text = question7e.text = question7f.text = contact_message.text = age.text = business.text = contact_email.text = message_status.text = "";

  timer.removeEventListener (TimerEvent.TIMER, on_timer);

  }

  }

  Thanks in advance.

  J

  your string is incorrect.  use:

  var email_data:String = '? '. Question1 ="+ question1.text

  + '& question2 =' + question2.text

  + '& question3 =' + question3.text

  + '& question4 =' + question4.text

  + '& question5 =' + question5.text

  + '& question6 =' + question6.text

  + '& question7a =' + question7a.text

  + '& question7b =' + question7b.text

  + '& question7c =' + question7c.text

  + '& question7d =' + question7d.text

  + '& question7e =' + question7e.text

  + '& question7f =' + question7f.text

  + '& message =' + contact_message.text

  + "& age =" + age.text

  + "& business =" + business.text

  + '& email =' + contact_email.text;

• Need help with application of a gradient for a displacement map.

  

  How a gradient of mitigation can be applied to this Hexagon,

  to make it darker to the outer edge

  and inner edge, everything also.

  I'm hoping to use it as a displacement map,

  While it will be a 3d which exceed the hegagon

  which is smoothed to the surface using the gradient.

  I appreciate all help.

  Make a hexagonal shape. In the layers panel at the top, set "Fill" at 0%.

  Add a layer to shot Style; the value of the gradient fill Type and style to the Position of the Burst.Set shape to the inside, so the corners remain strong, not rounded. You will also need a black-white-black gradient.

  

  Gives: