New hard drive installed on Portege M200 but does not start

I upgraded the hard drive in my Portege M200 from 4 GB to 80 GB using Parted Magic to clone the original disc. Cloning complete successfully, but instead of starting with the new drive, the M200 simply display a blinking cursor when turned on. Any help is very appreciated.

TIA, update

Advertisement

Hello

Maybe you can try one of the below to solve your problem:

BUT! ALWAYS keep a backup!

Boot the system with a flexible BACK (with fdisk.exe inside) to restore the MBR by typing

FDISK/MBR

This works even on a SATA drive. Start alternative all Win2k or XP installation CD, go to the console command and issure of recovery

FIXMBR

See you soon

Tom

Tags: Toshiba

Similar Questions

  • New HARD drive installed Vista 32 bit, but need drivers for Satellite Pro A300-1MC

    "Because my recovery disks that I made 3 years ago does not, I just installed Vista 32 bit and then on the Toshiba site, where I have downloaded all the drivers available for my laptop (a Satellite Pro A300-1MC) on a USB key (that I don't have a driver to connect to broadband on my laptop) and when I tried to open on my laptop a message comes up saying" Please insert the last disk of all selfextracting and click OK to continue. "

    So what I do now?
    Thank you

    Sounds like you have enabled autoplay
    Whenever you insert the memory key USB flash it will try and read the contents of the files on it.
    You can disable this by holding SHIFT when you insert the USB key.
    This should disable the AutoPlay option.
    Then you can go to MY computer in order to access the USB key.

    Note: pilots are zipped so you will need to decompress the content first, I installed a 3rd third party tool called WinRAR to unpack the packages unique.

  • New hard drive installed Vista Ultimate, now I can not install my printer - why?

    Computer Dell laptop hard drive replaced (warranty) with Vista Ultimate, I installed Office 2007 Professional disc 1 fine, windows update is fine, but I cannot complete the installation for my Kodak printer disc. Has been given the Internet to install via the internet address - link doesn't work either - drive flashing green bar "installation preparation" then nothing? Link Web shows 'Preparing to install' with a full bar green - then stuck there. A few minutes later, he disappears. Never installed. Do not open the drive or cross the bar - never open the Green window to install. Support Kodak decided that I was missing the .net on pre-installed OS HDD framework files. Enough of 3.45 and 4. Is this correct? Do I need previous versions, or something else is the cause. How can I check to see that all the files are correct and understand WHY I can not INSTALL MY PRINTER?

    Until the hard disk, memory & the keyboard have been replaced by the Dell tech, I had installed and printed on this Kodak printer for 9-12 months. Suggestions welcome.

    Hi LSMama,

    (1) you get an error message?

    (2) what is the model number of your printer?

    There could be several causes for this problem, try the following steps:

    Step 1: Run the troubleshooter printer available in the link below and then check

    Solve printer problems

    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

    Step 2:  Clean boot the computer and then try to install the printer

    Follow step 1 in the link below,
    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

    Important: n ' forget not to put the computer to a normal startup follow step 7 in the link.

    Thank you, and in what concerns:

    Ajay K

    Microsoft Answers Support Engineer
    ***************************************************************************

  • Installation of Vista on the new hard drive was interrupted, and now I can not start the computer

    So I decided that I need a bigger hard drive. I got a 500 GB hard drive, so I have it PLOPPED in my Acer Aspire 5517 with my vista boot drive, turned on and began to go through the process. Once he got to the phase 'installation complete' it seems to take a while, so I let it run all night. Once I got up, it was on a black screen with the mouse, I let stand a few more minutes but still nothing. I turned off and started it expects to find to return at the beginning of the installation, but instead he began to start from what is on the hard drive at this time. It got to the screen with the loading bar and the sign 'Microsoft Corporation'. The loading bar was very frigidity and stopped and started randomly. I let it do this while I went to school, but when I got home, it was always the same loading screen. I rebooted and tried to start in safe mode, but when I do it it stops at crcdisk.sys, and never forwarded charges. I tried to do the reset thing factory start it but that doesn't seem to work. My other puny hard drive still works, but the other does not. I searched the internet but have not seen any other problem like it. I want to just start completely clean of my new 500 GB. Please help!

    Hi James,

    1. What is the number of brand and model of the hard disk of 500 GB?

    2. How did the 500 GB hard drive connected to the computer? It is external or internal?

    To troubleshoot the unable to start the issue to cause corrupted driver, some files that can not be loaded during the startup process must be fixed or restored. So, let's check the disk by using the Windows Recovery Console.

    (a) put the Windows Vista installation disc in the disc drive, and then start the computer.

    (b) press a key when the message "Press any key to boot from CD or DVD ".

    (c) select a language, a time, a currency and a keyboard or another input method, and then click Next.

    (d) click on repair your computer.

    (e) (click on the operating system you want to repair), and then click Next.

    (f) in the System Recovery Options dialog box, click command prompt. Type chkdsk c:/f to try to correct the errors.

    (g) Note: answer them when chkdsk asks you if you want to check the disk next boot Vista

    (h) after the recording of the disc, and then run sfc/scannow to check the corruption of system files.

    Important: when running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost.

    Check out TechNet help links and check if that helps:

    The computer starts stops at crcdisk.sys

    Help! Vista won't start... (crcdisk.sys)

    Let us know the status of the issue. If you need help, please after return. We will be happy to help you.

  • Satellite L840: Win 8.1 installed as 1 BONE but does not start correctly

    I have a problem with my new L840 Satellite

    Next steps on installing Windows 8, 1 and in the process, he said on-screen that download to update and restart just stays on the screen with circles of loading windows...

    How can I go to the BIOS? Tried F2, INS F2, F2 - F8 it does not work...

    > It just on windows with the circles of loading screen stays...
    What happens if you put the device by pressing and holding the button walk / stop?
    The laptop boot?

    To access the BIOS, you must press F2 to turn on/off the unit.
    Note: the laptop must be turned off completely in order to access the BIOS. 8.1 Win usually enters the hybrid shutdown mode that is NOT the real stop

    More about CIHI:
    [Perform a complete shutdown in Windows 8 | http://aps2.toshiba-tro.de/kb0/TSB2B03EY0002R01.htm]

  • Acrobat Pro XI installed on Windows 7 but does not start

    I purchased a standalone version of Acrobat Pro XI and installed on my Windows 7 computer. The first time I try to run, I get a window asking me to check the serial number. The DDL for the product name does not list Acrobat Pro XI and it does not accept my serial number (even if I copy / pasted from the page of order on the adobe.com website). It is said that the serial number is valid, but that the product is not on the machine. And yet, when I browse to program files > Adobe > Acrobat, alto - it is.

    When I double-click on the exe file, I get the message, 'validation serial number', followed of "serial number is valid, but no product calling is not found...". »

    I tried uninstalling and reinstalling several times, to no avail. And Yes, I also tried to restart after the installation as well. I am, of course, on a deadline and really needs this job...

    Help!

    Assuming that you are installing an upgrade version, you have the SN of the eligible current modernization (AA9 or AA X) version?

  • volume level missing meter after accident and install new hard drive. The volume level indicator does not display when I raise or lower the volume. How to show again?

    volume meter

    Hello

    You have reinstalled the drivers for your audio card yet? Good luck, Rick Rogers, aka "Crazy" - Microsoft MVP http://mvp.support.microsoft.com Windows help - www.rickrogers.org

  • I recently had a new hard drive installed in my 2008 iMac. I'm trying to re - install office and the computer does not recognize my password. I tried all the passwords I can think of and nothing works and it wont let me continue

    I recently had a new hard drive installed in my 2008 iMac desktop computer, because right now I can't afford a new computer.   I am now under OS X El Capitan 10.11.4 and my password no longer works so that I can reinstall office microsoft for Mac.  I'm trying to change my password, but you must enter the old password and it does not recognize the password.  I tried every password I use and nothing works.  How can I change or get a new password?

    Reset the password.

    OS X 10.7 Lion, Mountain Lion, Yosemite 10.9 10.8, Yosemite 10.10 and 10.11 El Capitan

    Shut down the computer.

    Start the computer, and then press on and hold the command key and the R key to boot from the recovery partition.

    When you see the Apple logo, release the keys.

    Wait until the OS X Utilities window appears.

    Move the mouse pointer to the bar menu at the top of the screen, click on "Utilities" and select "Terminal".

    in the menu dropdown.

    Terminal window is displayed.

    TypeRegeditdans resetpassword and press enter on the keyboard.

    Reset Password Utility window will open.

    Leaving the Terminal.

    Select Macintosh HD, if not already.

    Select the user account in the menu popup box under "Select user account.

    Enter a new password.

    Re-enter the new password for the user.

    Enter a hint.

    Click on the Save"" button.

    Click  in the menu bar, and then select restart.

    Open a session.

    When Keychain dialog box appears, select "create new keychain".

  • How to get a product key, that I had a new hard drive installed in the computer shop and it seems that there is no key for windows 7

    Original title: window 7

    Hi can one tell me how to get a product key, that I had a new hard drive installed in the computer shop and it seems that there is no key for windows 7, I just brought Office 2016 and he did not finish the load down with the windows key 7.

    Because Windows 7 is in limited stock because Microsoft ended sales in October 2013, this created demand due to its rarity. This means the retail boxed copies request a bonus, while the OEM System Builder copies remain affordable.

    Full version (retail):

    -Includes the rights of transfer to another computer.

    -Does not require a qualifying earlier version of Windows.

    -Expensive

    Upgrade version (detail):

    -Includes the rights of transfer to another computer.

    -require a qualifying earlier version of Windows.

    -Expensive, but less expensive full version

    OEM System Builder version:

    The OEM of Windows 7 versions are identical to the versions commercial full license with the following exception:

    -OEM versions don't offer any free direct support from Microsoft technical support Microsoft

    -OEM Licenses are tied to the computer first you install and activate it on

    -OEM versions allow all hardware upgrades except for an upgrade to a different model motherboard

    -OEM versions does not move directly from an older Windows operating system

    There is nothing wrong to use it too, especially that all future versions of Windows will be full versions.

    You can find software OEM System Builder of dozens of online merchants. The current price for OEM Windows 7 Professional Newegg, for example, is $ 140. When I checked a few minutes ago, Amazon offered packages OEM Windows 7 Professional from several vendors at prices ranging from $ 101 to $ 150. When I checked earlier, a package specifically designed for reconditioned PCs cost only $ 50 for a 64-bit copy.

    There is no technical limitation to prevent you from using OEM software on your computer, although this software only works for a clean install, not an upgrade. In the past, Microsoft has been remarkably inconsistent in his advice to clients on the question of whether this practice is allowed. (See "is allowed to use Windows OEM on your own PC? Don't ask Microsoft. »)

  • I got a new hard drive installed in my laptop. The difficulty to reconnect my printer.

    Recently, my computer crashed and I had to have a new hard drive installed.  When she came back to me I found that my printer to be connected to my laptop.  I tried to use the disc that I used when I purchased the printer.  But now, with this new hard drive, I need to connect to the printer to my laptop once again, and I have a problem that I can't fix it.  Please can someone explain what I need to do?

    Thank you.

    From Internet Explorer

    Original title: I got a new hard drive installed in my laptop. I need to reconnect my printer with my laptop - problems with this. Help, please.   

    Hi Jessie,.

    Unplug the printer first. Insert the Driver CD for the printer. install by clicking on Setup. continue when asked to connect the printer and connect the USB cable to the laptop. There is not any question...

  • Satellite P750 new HARD drive installed - what do we do now?

    Satellite P750 new hard drive installed as directed assistance of toshiba video suite of crush hard drive.
    What should we do now please help?

    Now you must install the Windows System.
    You have a Toshiba Recovery disk?
    Have you created one in the past?

    If you have this disc, insert the disc recovery and boot disk (press F12 and choose ODD as boot device)

    Then follow the instructions on the screen

  • I just had a new hard drive installed (with XP), and no matter where I set the resolution, everything seems to be stretched horizontally

    I just had a new hard drive installed with XP, and no matter what I set the resolution to, everything now looks stretched horizontally.  I don't have this problem with the old hard drive containing XP

    If you did a clean installation of XP, then you must install the hardware drivers for your components. Go to the website of the manufacturer of your PC, then download and install the latest Windows XP drivers for your model.

    SC Tom

  • I had to get a new hard drive installed on my computer dI had to get a new hard drive installed on my computer, how do I reinstall Creative Cloud? o I have reinstall creative cloud?

    I had to get a new hard drive installed on my computer how can I reinstall the creative cloud?  Do I first have to use the trial version?

    Hi Robin,

    Please refer to the help documents below to download the application Adobe CC:

    Creative cloud to desktop

    Download, install, update or uninstall applications

    Kind regards

    Sheena

  • I use CS5.1 and installed a new hard drive. during the migration, PS now will not work. How can I reinstall? installation initial performed from the internet, no discs.

    I use CS5.1 and installed a new hard drive. during the migration, PS now will not work. How can I reinstall? installation initial performed from the internet, no discs.

    Download the CS5 products

  • I went in lightroom today and it can't find my photos. I bought an external hard drive and copied some elements but did not cut their.  I did a back up on my external hard drive but didn't budge them. I did the simple troubleshooting and I

    I went in lightroom and can't find my photos. I lost the link before and did the right click to find and they have been found, but it's different.

    I bought an external hard drive and copied some elements but did not cut their.  I did a back up on my external hard drive, but even once did not move them. I did the simple troubleshooting and it doesn't work.  I'm trying to find the original by right clicking the? on the folder LR and once I find the file it tells me that Lightroom has this file already in the catalog - and I want to merge. I tried one and it disappeared or moved. Help!

    Use the file Explorer to see if the images are still in their original location. I suspect that move instead of copy them. This can happen if you drag you the.

    I found that it is best to use either right click on a file or folder name and select copy then right click on the drive-destination folder and select Paste or use keyboard shortcuts to copy and paste folder and files from one disk to another. The keyboard shortcuts are the CTRL + key C to copy and Ctrl + V to paste in the selected destination folder-drive.

Maybe you are looking for