New hard drive, installed Windows XP PRO version 2002 - resolution screen and internet problems

Similar Questions

• HP Probook 4520 s installed new hard drive with Windows 7 pro x 64 and drivers - very lag

  Hello

  I had my HP Probook 4520 s for 5 years and a few months ago, he started to become very lag, especially when you use the internet, streaming video and games.

  I thought I had identified the problem as a bad sector on the hard drive and so I bought a new hard drive and upgraded the RAM from 4 GB to 8 GB at the same time.

  When I installed the new hard drive, I couldn't burn an image of my old hard drive (it would stop during the process and was unable to do so because of an error). I used my little HP Windows 7 Pro x 64 operating system DVD and your HP Application and Driver Recovery DVD to install the necessary drivers on my replacement new drive.

  The RAM and the new hard drive seem to be good, however, it's more lag. I tried to use latancy monitors to see if the drivers are the issue. It seems that there is a huge amount of latancy and my CPU is at an almost constant usuage of 100%.

  LatancyMon points in the following drivers: usbport.sys, tcip.sys, acpi.sys, iastor.sys, ndis.sys, dxgkrnl.sys and so on.

  I've seen forums where they will guide you step by step how to determine what drivers are causing latancy. This I could do although he always seems to change drivers who are the cause of the problem and there seems to be a lot of pilots of causing this problem it is so difficult to bring out here that one. In addition, there seems to be no solution to these problems. The only one offered is to update the offending drivers. This does not solve the problem with lag and the latancy yet.

  Any ideas?

  P.s. I really don't know not what is the underlying issue is here so I don't know if this is the right forum to post in. Drivers may not at all be the issue, I spent the last four weeks trying to solve this problem.

  Hello skinandbones13

  Thanks for posting on the HP Forums!

  I understand that you have a problem with your laptop. However, since it is a commercial laptop, you should post your question on the map cell of the HP Enterprise Forums for a better answer.

  Have a wonderful day!

  Mario

• How to get a product key, that I had a new hard drive installed in the computer shop and it seems that there is no key for windows 7

  Original title: window 7

  Hi can one tell me how to get a product key, that I had a new hard drive installed in the computer shop and it seems that there is no key for windows 7, I just brought Office 2016 and he did not finish the load down with the windows key 7.

  Because Windows 7 is in limited stock because Microsoft ended sales in October 2013, this created demand due to its rarity. This means the retail boxed copies request a bonus, while the OEM System Builder copies remain affordable.

  Full version (retail):

  -Includes the rights of transfer to another computer.

  -Does not require a qualifying earlier version of Windows.

  -Expensive

  Upgrade version (detail):

  -Includes the rights of transfer to another computer.

  -require a qualifying earlier version of Windows.

  -Expensive, but less expensive full version

  OEM System Builder version:

  The OEM of Windows 7 versions are identical to the versions commercial full license with the following exception:

  -OEM versions don't offer any free direct support from Microsoft technical support Microsoft

  -OEM Licenses are tied to the computer first you install and activate it on

  -OEM versions allow all hardware upgrades except for an upgrade to a different model motherboard

  -OEM versions does not move directly from an older Windows operating system

  There is nothing wrong to use it too, especially that all future versions of Windows will be full versions.

  You can find software OEM System Builder of dozens of online merchants. The current price for OEM Windows 7 Professional Newegg, for example, is $ 140. When I checked a few minutes ago, Amazon offered packages OEM Windows 7 Professional from several vendors at prices ranging from $ 101 to $ 150. When I checked earlier, a package specifically designed for reconditioned PCs cost only $ 50 for a 64-bit copy.

  There is no technical limitation to prevent you from using OEM software on your computer, although this software only works for a clean install, not an upgrade. In the past, Microsoft has been remarkably inconsistent in his advice to clients on the question of whether this practice is allowed. (See "is allowed to use Windows OEM on your own PC? Don't ask Microsoft. »)

• I recently had a new hard drive installed in my 2008 iMac. I'm trying to re - install office and the computer does not recognize my password. I tried all the passwords I can think of and nothing works and it wont let me continue

  I recently had a new hard drive installed in my 2008 iMac desktop computer, because right now I can't afford a new computer.   I am now under OS X El Capitan 10.11.4 and my password no longer works so that I can reinstall office microsoft for Mac.  I'm trying to change my password, but you must enter the old password and it does not recognize the password.  I tried every password I use and nothing works.  How can I change or get a new password?

  Reset the password.

  OS X 10.7 Lion, Mountain Lion, Yosemite 10.9 10.8, Yosemite 10.10 and 10.11 El Capitan

  Shut down the computer.

  Start the computer, and then press on and hold the command key and the R key to boot from the recovery partition.

  When you see the Apple logo, release the keys.

  Wait until the OS X Utilities window appears.

  Move the mouse pointer to the bar menu at the top of the screen, click on "Utilities" and select "Terminal".

  in the menu dropdown.

  Terminal window is displayed.

  TypeRegeditdans resetpassword and press enter on the keyboard.

  Reset Password Utility window will open.

  Leaving the Terminal.

  Select Macintosh HD, if not already.

  Select the user account in the menu popup box under "Select user account.

  Enter a new password.

  Re-enter the new password for the user.

  Enter a hint.

  Click on the Save"" button.

  Click  in the menu bar, and then select restart.

  Open a session.

  When Keychain dialog box appears, select "create new keychain".

• Satellite P750 new HARD drive installed - what do we do now?

  Satellite P750 new hard drive installed as directed assistance of toshiba video suite of crush hard drive.
  What should we do now please help?

  Now you must install the Windows System.
  You have a Toshiba Recovery disk?
  Have you created one in the past?

  If you have this disc, insert the disc recovery and boot disk (press F12 and choose ODD as boot device)

  Then follow the instructions on the screen

• I just had a new hard drive installed (with XP), and no matter where I set the resolution, everything seems to be stretched horizontally

  I just had a new hard drive installed with XP, and no matter what I set the resolution to, everything now looks stretched horizontally.  I don't have this problem with the old hard drive containing XP

  If you did a clean installation of XP, then you must install the hardware drivers for your components. Go to the website of the manufacturer of your PC, then download and install the latest Windows XP drivers for your model.

  SC Tom

• I had to get a new hard drive installed on my computer dI had to get a new hard drive installed on my computer, how do I reinstall Creative Cloud? o I have reinstall creative cloud?

  I had to get a new hard drive installed on my computer how can I reinstall the creative cloud?  Do I first have to use the trial version?

  Hi Robin,

  Please refer to the help documents below to download the application Adobe CC:

  Creative cloud to desktop

  Download, install, update or uninstall applications

  Kind regards

  Sheena

• How to recharge my hard drive with photos that are stored in iCloud.  After installing a new hard drive, there's no pictures found in the Photos, and I get this error "cannot find system Photo library named"Library.photoslibrary Photos".

  How to recharge my hard drive with photos that are stored in iCloud?  After installing a new hard drive, there's no pictures found in the Photos, and I get this error, "could not find the picture of system library named"Library.photoslibrary Photos".

  Soon as your App Photos or iPhoto lost track of your photo library, or there has not been migrated from your old drive. You can create an empty library and probably enable iCloud photo library for photos to upload to the cloud.

  Designate a library in pictures - Apple Support System

  

• I got a new hard drive installed in my laptop. The difficulty to reconnect my printer.

  Recently, my computer crashed and I had to have a new hard drive installed.  When she came back to me I found that my printer to be connected to my laptop.  I tried to use the disc that I used when I purchased the printer.  But now, with this new hard drive, I need to connect to the printer to my laptop once again, and I have a problem that I can't fix it.  Please can someone explain what I need to do?

  Thank you.

  From Internet Explorer

  Original title: I got a new hard drive installed in my laptop. I need to reconnect my printer with my laptop - problems with this. Help, please.   

  Hi Jessie,.

  Unplug the printer first. Insert the Driver CD for the printer. install by clicking on Setup. continue when asked to connect the printer and connect the USB cable to the laptop. There is not any question...

• To replace the hard drive on my MacBook Pro, I disable Photoshop 6, and I believe that I have disabled my Photoshop 5.5 (adobe Creative Suite 5.5 Design Standard). I could through the Adobe Web site to download and install Photoshop 6; but the Adobe Cre

  To replace the hard drive on my MacBook Pro, I disable Photoshop 6, and I believe that I have disabled my Photoshop 5.5 (Adobe Creative Suite 5.5 Design Standard). Supposedly if you turn into a sequel they will disable all. I could, through the Adobe Web site to download and install Photoshop 6; but the Adobe Creative Suite 5.5 Design Standard is not put at my disposal for download. Any suggestions?

  Joseph, here is the link to Download CS5.5 products

  Let us know if you need help with it.

  Atul_Saini

• New hard drive mounted, didn't save lost all devices sony and Microsoft word. Still have the product that was supplied with the laptop key. Can I get this without having to buy new?

  VAIO laptop

  New hard drive mounted, didn't save lost all devices sony and Microsoft word. Still have the product that was supplied with the laptop key. Can I get this without having to buy new?

  To restore the software preinstalled on the computer, or to install disks:

  Contact the OEM computer manufacturer and ask them to send you an installation to your computer disk - they may charge a small fee. Contact information for the manufacturer of your computer can be found here:

  http://support.Microsoft.com/GP/oemphone/

  Sony support:
  http://eSupport.Sony.com/

• Can I install unused Windows 7 on my new hard drive with Windows 8?

  SO to make a long story short I let my friend borrow a laptop computer and in some SORT he wiped the BONE. I have a HP Pavilion g7 and it is running windows 8. I called HP and after 45 minutes they told me they could send me a new hard drive and a 8 windows recovery disk. I already have an unused copy of windows 7. My question is can I install windows 7 on it and forget just about 8. (Yes, I'm one of those people) but it's so much easier for me to use. but theoretically, since I do not have an operating system on the hard drive I should be able to right? Thanks in advance!

  Original title: Windows 8 for windows 7

  Check the HP website first to ensure Windows 7 drivers are available for this laptop model. So here, there should be no problem with installation of Windows 7.

  Like to do a clean install with Windows 7, please see the following instructions:

  Clean Install with an upgrade Version Windows 7 - Windows 7 help Forum

• Can't see the new hard drive on my Satellite Pro 6100

  I bought a new Toshiba 40 GB hard drive for my Satellite Pro 6100.
  I installed it in the Bay, but it is not recognized in the BIOS, or when I try to reinstall using the recovery disk!
  Bios recognize that there are in the car, even if it is not formatted?
  I'm missing something?

  Thanks in advance

  Neil

  It should work!

  The reader should also be recognized that even he is not formatted...

  3 things you can do:
  At the start you can go in bootmenu and check if the drive is recognized on the 1st controller.
  If this is not the case, check the configuration of the drive (master, slave, CSEL).

  If this is not enough to check the toshiba support website and download the latest version of the bios (probably you already have, check as mentioned above)

  If this does not work your new drive (or worse: your controller) could be faulty. If the reader of the Moose still work on your laptop, check the 40 GB drive to another laptop or PC with adapter ATA connection normal.

• installed a new hard drive install vista and full custom

  I bought a new hard drive for my laptop and I tried several times to re - install windows vista, I have not yet defined a partition, but I don't think that should affect the initial installation. I can get windows installed the first reboot and after it goes to a screen installation complete and remains on for about 20 minutes, after that I get a black screen with a cursor. I'm clueless as to what is the question.

  Hello

  You can't push Dell by providing Microsoft DVD

  but you can ask

  all they do is provide you with a way to reinstall vista, they have done

  HP is one that you hear about with replacements parts not OEM

  This is Dells use this DVD

  http://supportapj.Dell.com/support/topics/global.aspx/support/DSN/en/document?journalid=67E9C215C4BABD6CE040AE0AB5E14F05&docid=339949

  ________________________________________________

  or borrow a microsoft vista dvd. not a HP, Acer recovery disk etc

  Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer

  they contain all versions of vista

  This is the product key that determines which version of vista is installed

  http://www.theeldergeek.com/Vista/vista_clean_installation.html

  ________________________________________

  and try the Dell support forums

  There have your same problem

  http://en.community.Dell.com/support-forums/default.aspx

• New hard drive install - problems to boot XP from CD

  Hello

  I tried to install XP Pro on a new hard drive on my desktop Dell Inspiron friends in order to get rid of him from the horror that is Windows Vista, but have problems getting to start from the CD-ROM.

  He wanted to install XP on a new hard drive, so he could easily switch back must take leave of his senses and decides to go back to Vista, but with the new drive master seagate in place I can't boot from the CD.  I pressed F12 at startup and a list of startup options, but none of them seem to contain an option to boot from the XP pro CD, I put in the machine.

  The start screen contains the following:

  Hard drive

  -SATA - 0 ST3320820AS

  -USB - HDD0: SeagateFreeagent

  -Bootable add in cards

  UTILITY PARTITION

  Even though I'm reasonably computer, start all / computers Bios configuration is something that I know practically nothing, where the reason that I have so many problems here.

  If anyone could offer any help, it would be much appreciated.

  Thank you, Kris