New hard drive problem
I have a HP G7 - 250CA in which the hard drive crashed during an update of the bios. I put in a new hard drive and now want to do a new installation of Windows XP that I don't have the recovery disks. I get an error there is a problem with the disk hard when I try to install XP and run chkdsk, bur the fine tested HD in the BIOS test. I do something wrong or what I need to do in the first place the recovery discs? If so I will order them and also a copy of windows 7, if that's the way to go.
Thank you
Thank you for your help, d/l should the wrong driver SATA. Ended up choosing Windows 7 and installed like a charm. Everything seems to work fine now.
Tags: Notebooks
Similar Questions
-
I put a new hard drive in my computer (the former was frozen) and allowing to start a disk of vista basic from one of my other computers. Now it tells me to activate my copy. I bought a windows 7 Professional upgrade of and dealer OEM but it does not load.
I have my original system recovery discs and they do not work... Caddy
Hello
'and a disc of vista basic from one of my other computers allowing to start'
You cannot use a disk Dell on a Toshiba, or an Acer on a HP etc etc.
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
There is no Windows Vista downloads available from Microsoft.
You can contact your computer manufacturer and ask them to send you a set of recovery disks.
They should do this for a small fee.
"How to replace Microsoft software or hardware, order service packs and replace product manuals.
http://support.Microsoft.com/kb/326246
Some manufacturers have more available Vista recovery disks.
If this happens, you may need to try this instead:
You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.
Other manufacturers recovery DVDs are should not be used for this purpose.
And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs
Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:
"How to do a clean install and configure with a full Version of Vista '
http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html
And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.
And phone Activation may be necessary when you use the above installation method.
"How to activate Vista normally and by Activation of the phone '
http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
After reinstalling Vista and turn it on, check if your Vista Basic machine is capable of running Windows 7.
Go to your computer / computer laptop manufacturer Web site and see if Windows 7 drivers are available for your make and model computer / laptop.
If this is not available, Windows 7 will not properly work for you.
Run the "Windows 7 Upgrade Advisor.
http://www.Microsoft.com/en-US/Download/details.aspx?ID=20
Check if your specifications are compatible for Windows 7:
"Windows 7 system requirements"
http://Windows.Microsoft.com/en-us/Windows7/products/system-requirements
"Windows 7 Compatibility Center" for software and hardware:
http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx
Windows 7 upgrade paths:
http://TechNet.Microsoft.com/en-us/library/dd772579 (v = ws.10) .aspx
See you soon.
See you soon.
-
Equium A200-1V0 - recovery on the new HARD drive problem
Hello
Hoping someone can help, I just mounted a new Toshiba 1 TB hard drive for my Equium A200-1V0, used the Vista came with the computer recovery disk, everything seems to be installed ok, but when you try to start, I get a message saying that Windows Vista is unable to run on this hardware. Any suggestion is appreciated.
Thank you
There must be a compatibility problem. Usually the hard drives up to 500 GB are not problematic for the old machines.
If possible, try to install the version of the OS. When you can get Win7 32 bit would be great. Win7 32-bit is supported for your machine and in my view, it will work perfectly. -
Activation of Windows Vista on a new hard drive problem
I had to reinstall Vista on my Dell Inspiron 1750, due to a hard drive failure. I was installing a disk hard nine for the first time after having exchanged the defective drive. I have an OEM of Vista Home Premium version and a sticker of activation on the laptop to consider no problem. However when I try to activate Vista using the key on my laptop, I get an error saying that it is already in use. What should I do now?
You can reactivate your Windows Vista installation by doing the following:
1. click on the Start button and in the box, type search: slui.exe 4
2. press the Enter key on your keyboard.
3 select your country.
4 follow the instructions for the activation of the telephone (toll-free).
Carey Frisch
-
Problems copying bookmarks from old Hard Drive to new hard drive
The motherboard on my old Windows Vista 64 - bit is dead. The hard drive is still accessible. I bought a new PC with Windows 7 and installed Firefox. I find the.default file for Firefox on the old drive hard and copied and pasted in my new profile on my new hard drive. The old hard drive is connected to my new PC with an external hard drive enclosure. I tried looking for in my old profile user Firefox hard disk of old. I do this by clicking on my old username, go to Program Files (x 86) and only one program file that I found for DNA. Firefox has been installed on my old PC, so I'm surprised that I can't find what it listed under Program Files (x 86) on this drive. If I search the old drive for 'signet', it evokes my bookmarksbackup and other files of bookmarks '.json '. I tired bookmarksbackup copy for my new Firefox profile on the new hard drive and it seems to work, but the old bookmarks do not appear when I open Firefox. I looked at the links troubleshooting for the same problem that others have posted, but they seem irrelevant, because I can't find the sqlite or the directory where my old Firefox settings are stored on my old hard drive. Thanks in advance for any help you can provide.
Firefox settings are not stored in program files, but they are stored under APPDATA.
If you take the newer JSON file you have, open Firefox, press Control, Shift and B at the same time, then go to "Import and backup" then 'restore', then choose file, you can import it like this?
-
Problem with new HARD drive and Qosmio Player installation
Hi all
I hope someone can help, I had my Qosmio for 2 1/2 years now and recently had a problem with the hard drive. I decided to replace the hard drive, because it was the fastest solution. The problem I have now is that I can't receive TV on media center. I tried to install qosmio player at the disk to see if it made any difference, but when I run the provided recovery disc software tells me that there is not enough disk space! The laptop came with a 60G hard drive and the new HARD drive manufactured by the same manufacturer is a 150 GB, can someone help me out with this would be appreciated.Thank you
ED.Have you tried to install Qosmioplayer initially, then on operating system? If I remember well, on this first portable Qosmio, it was very important to install Qosmioplayer initially.
-
Problems of formatting of the new hard drive in Macbook Pro
Hello
My internal hard drive in my MacBook Pro mid 2012 broke down. So I installed a new hard drive a ST1000LM014 of Seagate 1 TB hybrid discs which according to IFIXIT.com must be compatible.
I then boot the server Apple Macbook and party in disk Utillity to format the hard drive. The hard drive is visible and I'm then in the partition, choose the 1 partition, Mac OS X (journaled) + GUID. But while the partition that I get the error message failed to file system format.
I tried different options in disk Utillity and I am able to format the disk using FAT or ExFat. But it does not help me to use my mac hard drive.
Does anyone have any ideas on what to do? And it does not seem like a problem with the functionality of the hard drive?
Thank you
You must select the disk of material-name (upper, outermost level descriptor), not Volume name.
-
Want to transfer all the information on my current including system partitions and data to a new HARD drive than my current HARD drive shows signs of debris. I suspect there are a few problems in the copy of the system partition as some files are not available for copying while windows is running?
I advise to read the article on the copy of the hard drive in the first place, you can learn more. (:
-
My Dell has had some problems (patially due to age), so a buddy of mine and I put a new hard drive in it and then installed windows XP Pro. Installation went great, but now that it's installed, I can not get the screen resoultion to change and I can't connect to the internet. I feel like with the internet, can I have a driver problem. I know that the internet works, I'm on it with the laptop right now. Any suggestions?
???? I'm not sure I understand your question. You download the drivers to a place, you will find them, as the office. If you want to put them on a USB stick, copy the files downloaded to the key and take it to the computer target. Copy the files on the computer desktop. Double-click on a file and it will unpack the installation routine starts. Follow the installation wizard. Reset when said to repeat as needed until all the drivers, etc are installed. Subsequently, you can delete the downloaded files from Dell (from installation .exe). MS - MVP - Elephant Boy computers - don't panic!
-
HDD problem IBM Thinkpad T42. I can't install NEW Hard Drive and NEW OEM Windows XP?
Hi all
When I turn on the notebook Windows XP starts up and everything is loaded. But after 5 or 10 minutes, the response is very slow. If I click on any window and try to open any folder, or open internet explore it takes about 1 or 2 minutes to respond. I tried several ways to scan disk and Defrag, but still that are of no use. I also tried 'Difficulty automatically File System Errors' and ' will search for and attempt recovery of bad sectors ", but this problem is still there. Even when I stop it takes too long to stop about 15 to 20 minutes.
When I turn on again NEXT DAY Windows XP starts and everything loads quickly. After 5 or 10 minutes, the response is very slow. This problem occurs for a few days.
I then used "IBM Rescue and Restore" to load fresh operating system. Still the problem does not get fixed.
Can you get it someone please let me know if this is problem of hard disk or something else. I'm guessing it's related to the hard drive.
If it is the drive hard problem how to save (clone) of this old hard drive AGAIN DISK (after buying) HARD.
If I buy the NEW HARD DRIVE and CD/DVD of NEW OPERATING SYSTEM OEM VERSION it will work? Do existing mother board ALLOW to load a NEW VERSION of OS OEM?
Thank you
Contact the manufacturer of your computer, IBM and ask them to send a recovery disk/s XP set.
Normally, they do this for a cost of $ small.
Buy a new hard drive > Reinstall.
XP forums:
http://social.answers.Microsoft.com/forums/en-us/category/WindowsXP
Link above is for XP Forums.
There is a list of the different Forums XP to the link above to help you.
You get the help you need there.
Here is the Vista Forums.
See you soon
Mick Murphy - Microsoft partner
-
PROBLEM LOADING WINDOWS 7 ON NEW HARD DRIVE
Hi, I tried to load windows 7 on a new hard drive, I followed a guide online and all goes well until the final phase. The installation is blocked at the point of
Windows is finalizing your settings there is a bar with a green light moving constantly on it what happens when the facilities are underway. It was like that all night, the laptop turns off during the night and when I turned it on this morning the same screen appeared. How can I get the installation to complete a big thank you to anyone who can help Mike
Hi Mike,.
Thanks for posting the request in Microsoft Community Forums.
1. have you recently replaced the hard drive? Do you have any other hard drive already present on the computer?
2. What is the brand and model of the computer?
3. what installation media you are using during the installation? Is it through DVD or USB?
This problem normally occurs when you have a problem with the installation media you are using. You can try to have a different installation media and try to install the operating system. Also, make sure that you have not connected external devices other than the mouse keyboard and multimedia installation.
Hope this information helps. Respond with more information so that we could help you more.
-
Activation problem with new hard drive on another computer.
When I upgraded to Win 8 on my pc, I decided to install my copy of Win7 on my computer laptop girls as well as an upgraded HARD drive. As we had all two Dell Inspiron Laptops and his laptop was in use, I installed the new HARD drive in my laptop and proceeded to the installation and updates at my ease.
I made the mistake to activate the Windows 7 successfully while the new HARD drive in my laptop.My problem is when I mount the HARD drive in my Dell laptop, it took re activation of girls and he does not accept the key.Can anyone help?Thank you, SimonOriginal title: the woes of Activation14 UPDATES. To use upgrade software, you must first be licensed for the software that is eligible for the upgrade. After the upgrade, this agreement takes the place of the agreement for the software that you upgraded. After you upgrade, you can no longer use the software upgrade of.
The OEM of Windows 7 versions are identical to the versions commercial full license with the following exception:
-OEM versions don't offer any free direct support from Microsoft technical support Microsoft
-OEM Licenses are tied to the computer first you install and activate it on
-OEM versions allow all hardware upgrades except for an upgrade to a different model motherboard
-OEM versions does not move directly from an older Windows operating system
What is OEM software? :
http://support.Microsoft.com/GP/oemsupport_1/en-GBLicensing FAQ:
http://www.Microsoft.com/OEM/en/licensing/sblicensing/pages/licensing_faq.aspxYou can purchase a license upgrade and convert the license for use on the new system:
Where can I still get Windows 7?
Full version - Microsoft Windows 7 Home Premium
Microsoft Windows 7 Ultimate - full version
Full version - Microsoft Windows 7 Professional
Version upgrade - Microsoft Windows 7 Professional Upgrade
Version upgrade - Microsoft Windows 7 Ultimate Upgrade
Version upgrade - Microsoft Windows 7 Home Premium Upgrade
Family Pack: Upgrade of Microsoft Windows 7 Home Premium Family Pack (3 users)
When you get the license for the corresponding edition, follow these steps:
Press Windows key + R
Type: slui.exe 3
Press enter
Enter the new product key, and then click next to activate via the Internet.
-
Recently, my hard drive crashed and could be damaged, because I can not install anything on this subject.
I still have the CD of Windows XP Professional that has been used to upgrade to Windows 7.So, if I buy a new hard drive and install XP first and then upgrade to windows 7. I'll be able toto do this without side windows activation problems.Or do I have to buy a new drive for windows?PS: Is it important that it is the version of Windows 7 professional student discount?Thank you.If your computer comes with a qualifying previous license such as Windows Vista or Windows XP and the certificate of authenticity is still attached to the machine in good condition, then the COST is reason enough to represent the compliance to the software license agreement. No previous required software installation, which means you can do a clean install with Windows 7 Upgrade disk.
How to do a clean install with upgrade disc:
Boot from the Windows 7 DVD
Click Install now
Accept the license agreement
When the option is displayed to select a type of installation, click (Custom advanced)
Click on drive Options
Select the disc/s click on Delete
Click new
Click on apply
Click OK
Click Format, and then click next to proceed with the installation
Skip entering your product key Windows 7 and complete the installation.
When you reach the desktop, click Start, right-click on computer
Click on properties
Scroll down to the Windows Activation
Click the link x days before activation.
Click on the link that says: "show me other ways to activate.
Enter the product key
Click next
Select the Activation of the phone
Click Next when you enter your key page
Select your country
Click Next, call the number listed
Be sure to explain your situation to the Appeals Officer.
Provide the installation generated when ID requested by the call agent
They give a confirmation ID in return, enter it
Click next to complete the activation.
However, the requirements for the media upgrade is that you have an operating system already eligible such as Windows XP or Vista installed to use it. Since the Windows 7 end user license agreement.
15 UPDATES. To use upgrade software, you must first be licensed for the software that is eligible for the upgrade. After the upgrade, this agreement takes the place of the agreement for the software that you upgraded. After upgrade, you can no longer use the software that you upgraded.
So, if you are always denied, you will just have to reinstall Windows XP or Vista and let it do the verification of eligibility.
or
How to activate Windows 7 manually (activate by phone)
1) click Start and in the search for box type: slui.exe 4
(2) press the ENTER"" key.
(3) select your "country" in the list.
(4) choose the option "activate phone".
(5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
(6) explain your problem clearly to the support person.
http://support.Microsoft.com/kb/950929/en-us -
We had to install a new hard drive. I installed CS5 - no problem, but cannot download and install CS6. Can you help me?
Hello
You can check the above troubleshooting steps: https://helpx.adobe.com/creative-cloud/kb/download-update-errors.html
Let us know if this helps!
-
New hard drive install - problems to boot XP from CD
Hello
I tried to install XP Pro on a new hard drive on my desktop Dell Inspiron friends in order to get rid of him from the horror that is Windows Vista, but have problems getting to start from the CD-ROM.
He wanted to install XP on a new hard drive, so he could easily switch back must take leave of his senses and decides to go back to Vista, but with the new drive master seagate in place I can't boot from the CD. I pressed F12 at startup and a list of startup options, but none of them seem to contain an option to boot from the XP pro CD, I put in the machine.
The start screen contains the following:
Hard drive
-SATA - 0 ST3320820AS
-USB - HDD0: SeagateFreeagent
-Bootable add in cards
UTILITY PARTITION
Even though I'm reasonably computer, start all / computers Bios configuration is something that I know practically nothing, where the reason that I have so many problems here.
If anyone could offer any help, it would be much appreciated.
Thank you, Kris
Maybe you are looking for
-
option button missing in the Tools menu in ubuntu
button in Firefox missing from the Tools dropdownusing ubuntu 14.04, new intall downloadsAdd - onsset up synchronizationetc...here but no option button to change settingsas new tab jumpor other parameters that are only FLEURIDAS under this option but
-
Find bookmarks, urls and history double
On Mac, Firefox version 14.0.1, which is the best add-on/app to find bookmarks, URLS and double-story? Thank you!
-
Hello I tried to load my Tablet via case GSP - SK1 and do not work. The keyboard works fine with the Tablet, this isn't a problem. I use diet tablet to connect a cable deal (as in the instructions). With the normal cable, Tablet disconnect of the cas
-
Draw a line connecting two points in the WPF chart
I'm trying to understand the best way to draw a line between two existing points on my graph in WPF. At first, I thought I had it works fine; I just added another parcel to my graph then given exactly two points for rendering. But I quickly noticed
-
HP officejet 7500 e910 do not print
I have an error message on my 7500 E910 that says "paper alignment", and therefore it will not print the document. How can I solve this problem? Thank you