New hardware found Message keeps appearing.

Similar Questions

• "Delayed write failed" message keeps appearing to external hard drive (WD passport) and problems with suggest fix kb908673 (register edit).

  I had problems with my WD usb hard drive, where a "delayed write failed" message keeps appearing when the transfer of files to or from it. Among the fixes suggested on the WD support site is a link to kb908673, and this seems to sum up my problem. This fix is included in sp3, I believe, however, the fix indicates that a manual registry editing needs to be done;

  "After you install this hotfix, the following registry subkey is automatically added and configured:

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\USB\EnSoftRetry

  The registry key is configured with a DWORD value of 1. This value allows the Soft-Retry code path that is used in this hotfix.

  "If you install a later version of the patch (a patch that contains later versions of Usbport.sys and Usbehci.sys), including Windows XP SP3, this registry value not be automatically added and configured. The registry value must be manually added and configured as described above to activate the Soft-Retry code path that is provided in this hotfix. »

  I don't have this registry subkey and have no idea how to do to configure a key to have a DWORD value - I can create as a registry entry DWORD value in this key, but it must be given a name. Should I create a DWORD value called "EnSoftRetry" in the USB, or should I create a DWORD value in the EnSoftRetry key and, if so, what should it be called? Or am I completely misunderstanding something here?

  (1) manage devices

  (2) find each host EHCI USB controller

  3) click on USB EHCI host controller Details of the

  Highlight 4) Device Instance path

  (5) copy "Device Instance path«path information in the Notepad for quick and easy access»»

  (6) open Regedit

  7) click "HKEY_LOCAL_MACHINE."

  8) click on 'SYSTEM '.

  9) click on CurrentControlSet «»

  10) click on 'Enum '.

  11) click on "PCI".

  (12) click on ' * the folder that corresponds to the stage 4 information.

  (13) this is where you should be now: "HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\PCI\------\Device Parameters.

  (14) right click on 'device settings '.

  (15) select "new-> Key".

  16) enter the field of naming the new key 'EnHcSoftRetry '.

  (17) right-click on "EnHcSoftRetry"the ket has created "

  (18) select "new-> DWORD (32-bit value).

  19) enter the field of naming 'DWORD '.

  (20) right click 'DWORD '.

  (21) select 'change '.

  (22) entry in the field value '1' Base of Hex

  (23) close regedit complete process :)
  

• 5510 all-in-one - could not load of new hardware found

  Hi, I have a Windows 2000 and loaded the correct driver full functionality system. But when the new hardware found appears, given that I don't have a CD, he asked me to copy the Builder files from... and wants a file with the suffix .inf. I had downloaded an .exe file. When I browse to the file name and file types it requires one. INF.

  I'm stuck here...

  Any help would be appreciated, thanks!

  Hey!

  I got it to work!

  Wow, who knew it was so involved!

  Thank you, thank you, thank you...

• No audio device, but in audio device manager all work as new hardware found.

  My Gateway Laptop lost her one day sound and then I started to get a "new hardware found" it is for the PCI device. Some drivers are on the computer or online. I have Windows XP sp3 running on it. I looked at all the blogs and recommendations, but I have not found the right one. Help, please.

  Hello

  Check in the XP forums.

  Answers - XP Forums
  http://answers.Microsoft.com/en-us/Windows/default.aspx#tab=4

  Answers - XP - music and sound Forum
  http://social.answers.Microsoft.com/forums/en-us/xpmusic/threads?filter=answered

  How this aid.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• New hardware found pop up when I start the computer

  Every time when I start my computer, I have a pop up saying "New hardware found" I don't want to install it... How can I get rid of him... I have a Windows Vista Home Basic.  Please, any help will be grateful...

  Hello

  Follow these steps:

  Utility Spotlight Windows Install CleanUp Utility - this can help you to stop it.
  http://TechNet.Microsoft.com/en-us/magazine/2008.08.UtilitySpotlight.aspx

  Description of the Windows Installer CleanUp utility
  http://support.Microsoft.com/kb/290301

  Windows install 4.5 Redistributable
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en

  --------------------------------------------------------------------
  Revo Uninstaller - free - you may need to reinstall then Revo can remove it.
  http://www.revouninstaller.com/

  --------------------------------------------------------------------
  I would also clean the possible general corruption.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Run the SFC and Chkdsk to ensure that corruption is disabled.

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  Hope they get you smoothly.

  Rob - bicycle - Mark Twain said it is good.

• Unable to synchronize files; Click here to view the online help. This message keeps appearing at the top right of my iMac and no matter what I do it keep appearing.

  Unable to synchronize files; Click here to view the online help. This message keeps appearing at the top right of my iMac and no matter what I do it keep appearing.

  Hello

  Please see the link below.

  Error: "unable to sync files.

  Hope this will help you.

  Kind regards

  Hervé Khare

• found new hardware MTP device keeps poping up

  in the status bar icon keeps popping up saying found new hardware MTP device.

  nothing is connected, and when I go to add new hardware, it says something is currently installing a custom let me go any further.

  When I click the x or right click on it, it goes for a few seconds and then just comes back.

  How do I get this go away permanently?

  Hello

  · Have you already connected any device Media Transfer Protocol (MTP)?

  Media Transfer Protocol devices are devices such as the digital camera or digital audio players.

  a. click on start

  b. click Run, in the Run dialog box type devmgmt.msc

  c. click view under view hidden devices

  d. expand all winks in Device Manager

  e. There will be multiple entries in the device in gray Manager uninstall all entries shaded under all the winks and then restart the computer restart the computer.

• new hardware found box of bluetooth device will not disappear when you try to install. ultimately it cannot find driver software but comes from the habit get off my computer

  I have a box that keeps coming back that it has detected a new hardware - peripheral Bluetooth
  and it won't go away.  If I go through the process of installing software device driver he asks me questions on a disc and if I don't then check the other options and all other options does not work it is in place can not find device driver software.  The problem is that's never on the computer as soon as I turn it on it won't go away don't anyone KNOW WHAT I CAN DO?

  Hello allysoni,

  Thank you for using the Microsoft Windows Vista Forums.

  I just want to check, your Bluetooth device work?  Or it works and you are just be notified?  What brand is your Bluetooth device and what type of computer you are on?

  Have you went into Device Manager to verify that the drivers are all up to date?  Go to start-> Type "Device Manager" in the search field-> select device-> you Manager see no yellow exclamation for one of your drivers?  If so, right click and select "Update".  If the driver is already updated, and then select uninstall.  (You may be prompted to restart)

  If you are not prompted to restart, click again on the device and select 'Install' please let us know status.  Thank you!

  Engineer James Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• application not found errors keep appearing

  Icons appearing on my quicklaunch is more would be to load (except IE and office)... received "application not found errors ' that appears when you click on them... for Word, Powerpoint, Outlook, Itunes Windows MediaPlayer etc... .. .you name it. Passes to the system tray.  No trace of icon of Symantec, remove any physical security or anything else that was already there. . I don't know if my rundll32.exe file is damaged, or if I met a debilitating virus. The only way to load itunes, Word, Excel is to click on one existing a desktop file with MP3, files.doc or * .xls extensions, then the file as well as program expenses. When I try via start > programs > Microsoft office apps never lie. When you try to load programs into the mystart menu a screen appears on my screen and said 'Open with' on the top bar and had a list of "recommended programs". Someone help me please

  Hi Dredogg346,

  There is a strong possibility that there may be some infections of viruses or malware on the computer. I suggest that you scan the computer and remove infections, check if it works.

  How to get rid of malware or viruses
  http://social.answers.Microsoft.com/forums/en-us/vistasecurity/thread/ba80504b-61f1-4D71-960f-b561798b7b42

  If you are still experiencing issues after the scan currently running on the computer, then check if it persists in safe mode.

  Steps to start in safe mode
  1 restart your computer if it is running.
  2. press the F8 key after your initially on powers computer.
  3. Once you see the menu Advanced Startup Options , you can stop tapping.
  4. use the up/down arrow keys to highlight your selection.
  5. Select Safe Mode and press enter.
  6. you should see loading drivers and then Please wait.
  7. you should then be at the Welcome screen.
  8. connect to your computer using an account with administrator privileges.

  Start your computer in safe mode
  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode
  Restart the computer to return to normal mode

  If you are still experiencing a similar problem in safe mode, then it is possible that the user account is damaged.

  Check to see if the problem continues in a new user account and check.
  Create a user account
  http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-user-account

  Go back with the results!

  I hope this helps!

  Halima S - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Can't get rid of a TX - message keeps appearing and being processed by the OSB

  I have a sort of a poison message or TX, I can't empty. Every 10 seconds, I get a message from journal like the second one below and the number of pending messages to several places and OSB proxy service processed messages keeps climbing--all this without producing new messages on my part I tried to delete the Bank to default server on the server managed OSB and storing files of the JMS server. No luck.
  
  When this first started happening, the error messages resemble the first below. Something I did caused the change, I guess. However, it's the same TX ID overall.
  
  So, first of all, how can I get rid of this thing? It makes me nuts and prevents me from closing on a VINE.
  
  Secondly, why is it happening? I have a suspicion - would it because we have configured somehow mutiple domains with the same name for a distributed application? It is not my habit but it happened. These areas do not communicate directly, but there are areas that need to communicate with both. So I think that the ambiguity of the name can be wrong us. Just a guess, if.
  
  In this case, the field of the sgosb proxy service (this domain name is unique) is receiving messages from a queue lies in the pega_domain to Singapore and another proxy service is put a message to another queue in the pega_domain in the United Kingdom. Is not in a single TX; the first proxy service forwards the message to a queue in the sgosb_domain, the second proxy service receives this message and puts it in the other pega_domain. It's a TX XA for each proxy service.
  
  Just to make it more fun, the sgosb_domain has another service of proxy read from a different queue and sent to a queue in the third pega_domain to the United States.
  
  DRM for any help or idea.
  
  Oh yes, the field of the OSB's WLS 10.3.4 while the pega_domains are WLS 10.3.2
  
  Original error message

  ####<Apr 13, 2011 4:32:13 AM GMT> <Error> <EJB> <sg01app510> <sgosb_1> <[ACTIVE] ExecuteThread: '7' for queue: 'weblogic.kernel.Default (self-tuning)'>
  <<anonymous>> <> <92f54a30d60e6302:-4b6d523c:12f4cfeaabc:-8000-0000000000000123> <1302669133597> <BEA-010026> <Exception occurred during commit of 
  transaction Xid=BEA1-039B0B6D3D0E77C1B135(1898471720),Status=Rolled back. [Reason=Unknown],numRepliesOwedMe=0,numRepliesOwedOthers=0,seconds since 
  begin=0,seconds left=600,XAServerResourceInfo[WLStore_pega_domain_ProcessEventJMS_Store_mgd1]=(ServerResourceInfo[WLStore_pega_domain_ProcessEventJMS_Store_mgd1]=
  (state=new,assigned=none),xar=null,re-Registered = false),SCInfo[sgosb_domain+sgosb_1]=(state=rolledback),SCInfo[pega_domain+pega_1]=(state=rolledback),properties=
  ({}),OwnerTransactionManager=ServerTM[ServerCoordinatorDescriptor=(CoordinatorURL=sgosb_1+152.64.128.243:22110+sgosb_domain+t3+, XAResources={eis/tibjms/Topic,
  WLStore_sgosb_domain_FileStore_auto_1, eis/aqjms/Queue, eis/wls/Queue, eis/tibjms/Queue, WLStore_sgosb_domain__WLS_sgosb_1, eis/AQ/aqSample, eis/aqjms/Topic,
  eis/pramati/Queue, eis/sunmq/Queue, WLStore_sgosb_domain_WseeFileStore_auto_1, WLStore_sgosb_domain_MesssageForwardingJMS_Store_mgd1, 
  WSATGatewayRM_sgosb_1_sgosb_domain, eis/jbossmq/Queue, eis/activemq/Queue, eis/fioranomq/Topic, eis/tibjmsDirect/Topic, eis/wls/Topic, 
  eis/tibjmsDirect/Queue, eis/Apps/Apps, eis/webspheremq/Queue},NonXAResources={})],CoordinatorURL=pega_1+nj09mhm5078:22111+pega_domain+t3+):
  javax.transaction.RollbackException: This transaction does not exist on the coordinating server.  It was probably rolled back and forgotten.
          at weblogic.rjvm.ResponseImpl.unmarshalReturn(ResponseImpl.java:234)
          at weblogic.rmi.internal.BasicRemoteRef.invoke(BasicRemoteRef.java:223)
          at weblogic.transaction.internal.CoordinatorImpl_1032_WLStub.commit(Unknown Source)
          at weblogic.transaction.internal.TransactionImpl$1.run(TransactionImpl.java:331)
          at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
          at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:146)
          at weblogic.transaction.internal.SecureAction.runAction(SecureAction.java:72)
          at weblogic.transaction.internal.TransactionImpl.commit(TransactionImpl.java:327)
          at weblogic.transaction.internal.ServerTransactionImpl.internalCommit(ServerTransactionImpl.java:252)
          at weblogic.transaction.internal.ServerTransactionImpl.commit(ServerTransactionImpl.java:239)
          at weblogic.ejb.container.internal.MDListener.execute(MDListener.java:553)
          at weblogic.ejb.container.internal.MDListener.transactionalOnMessage(MDListener.java:424)
          at weblogic.ejb.container.internal.MDListener.onMessage(MDListener.java:326)
          at weblogic.jms.client.JMSSession.onMessage(JMSSession.java:4659)
          at weblogic.jms.client.JMSSession.execute(JMSSession.java:4345)
          at weblogic.jms.client.JMSSession.executeMessage(JMSSession.java:3821)
          at weblogic.jms.client.JMSSession.access$000(JMSSession.java:115)
          at weblogic.jms.client.JMSSession$UseForRunnable.run(JMSSession.java:5170)
          at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:528)
          at weblogic.work.ExecuteThread.execute(ExecuteThread.java:207)
          at weblogic.work.ExecuteThread.run(ExecuteThread.java:176)
  Caused by: javax.transaction.RollbackException: This transaction does not exist on the coordinating server.  It was probably rolled back and forgotten.
          at weblogic.transaction.internal.CoordinatorImpl.commit(CoordinatorImpl.java:94)
          at weblogic.transaction.internal.CoordinatorImpl_WLSkel.invoke(Unknown Source)
          at weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:589)
          at weblogic.rmi.internal.BasicServerRef$1.run(BasicServerRef.java:477)
          at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
          at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:147)
          at weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.java:473)
          at weblogic.rmi.internal.wls.WLSExecuteRequest.run(WLSExecuteRequest.java:118)
          at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
          at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)

  The error message I receive now

  ####<Apr 13, 2011 4:51:38 AM GMT> <Error> <EJB> <sg01app510> <sgosb_1> <[ACTIVE] ExecuteThread: '18' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> 
  <92f54a30d60e6302:-42808c28:12f4d3173cb:-8000-0000000000000032> <1302670298730> <BEA-010026> <Exception occurred during commit of transaction 
  Xid=BEA1-0011D0679BA5074B8E12(1930603846),Status=Rolled back. [Reason=javax.transaction.xa.XAException],numRepliesOwedMe=0,numRepliesOwedOthers=0,seconds since begin=0,seconds 
  left=60,XAServerResourceInfo[WLStore_sgosb_domain_MesssageForwardingJMS_Store_mgd1]=(ServerResourceInfo[WLStore_sgosb_domain_MesssageForwardingJMS_Store_mgd1]=
  (state=rolledback,assigned=sgosb_1),xar=WLStore_sgosb_domain_MesssageForwardingJMS_Store_mgd1239571724,re-Registered = 
  false),XAServerResourceInfo[WLStore_pega_domain_ProcessEventJMS_Store_mgd1]=(ServerResourceInfo[WLStore_pega_domain_ProcessEventJMS_Store_mgd1]=
  (state=rolledback,assigned=pega_1),xar=null,re-Registered = false),SCInfo[sgosb_domain+sgosb_1]=(state=rolledback),SCInfo[pega_domain+pega_1]=(state=rolledback),properties=
  ({}),OwnerTransactionManager=ServerTM[ServerCoordinatorDescriptor=(CoordinatorURL=sgosb_1+152.64.128.243:22110+sgosb_domain+t3+, XAResources={eis/tibjms/Topic, 
  WLStore_sgosb_domain_FileStore_auto_1, eis/aqjms/Queue, eis/wls/Queue, eis/tibjms/Queue, WLStore_sgosb_domain__WLS_sgosb_1, eis/AQ/aqSample, eis/aqjms/Topic, eis/pramati/Queue, eis/sunmq
  /Queue, WLStore_sgosb_domain_WseeFileStore_auto_1, WLStore_sgosb_domain_MesssageForwardingJMS_Store_mgd1, WSATGatewayRM_sgosb_1_sgosb_domain, eis/jbossmq/Queue, eis/activemq
  /Queue, eis/fioranomq/Topic, eis/tibjmsDirect/Topic, eis/wls/Topic, eis/tibjmsDirect/Queue, eis/Apps/Apps, eis/webspheremq/Queue},NonXAResources=
  {})],CoordinatorURL=sgosb_1+152.64.128.243:22110+sgosb_domain+t3+): weblogic.transaction.RollbackException: Unknown reason
          at weblogic.transaction.internal.TransactionImpl.throwRollbackException(TransactionImpl.java:1881)
          at weblogic.transaction.internal.ServerTransactionImpl.internalCommit(ServerTransactionImpl.java:345)
          at weblogic.transaction.internal.ServerTransactionImpl.commit(ServerTransactionImpl.java:239)
          at weblogic.ejb.container.internal.MDListener.execute(MDListener.java:553)
          at weblogic.ejb.container.internal.MDListener.transactionalOnMessage(MDListener.java:424)
          at weblogic.ejb.container.internal.MDListener.onMessage(MDListener.java:326)
          at weblogic.jms.client.JMSSession.onMessage(JMSSession.java:4659)
          at weblogic.jms.client.JMSSession.execute(JMSSession.java:4345)
          at weblogic.jms.client.JMSSession.executeMessage(JMSSession.java:3821)
          at weblogic.jms.client.JMSSession.access$000(JMSSession.java:115)
          at weblogic.jms.client.JMSSession$UseForRunnable.run(JMSSession.java:5170)
          at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:528)
          at weblogic.work.ExecuteThread.execute(ExecuteThread.java:207)
          at weblogic.work.ExecuteThread.run(ExecuteThread.java:176)
  Caused by: javax.transaction.xa.XAException
          at weblogic.store.gxa.internal.GXAResourceImpl.prepare(GXAResourceImpl.java:1227)
          at weblogic.transaction.internal.XAServerResourceInfo.prepare(XAServerResourceInfo.java:1295)
          at weblogic.transaction.internal.XAServerResourceInfo.prepare(XAServerResourceInfo.java:500)
          at weblogic.transaction.internal.ServerSCInfo.startPrepare(ServerSCInfo.java:380)
          at weblogic.transaction.internal.ServerTransactionImpl.localPrepare(ServerTransactionImpl.java:2593)
          at weblogic.transaction.internal.ServerTransactionImpl.localPrepare(ServerTransactionImpl.java:1321)
          at weblogic.transaction.internal.SubCoordinatorImpl.startPrepare(SubCoordinatorImpl.java:183)
          at weblogic.transaction.internal.CoordinatorImpl_WLSkel.invoke(Unknown Source)
          at weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:589)
          at weblogic.rmi.internal.BasicServerRef$1.run(BasicServerRef.java:477)
          at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
          at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:147)
          at weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.java:473)
          at weblogic.rmi.internal.wls.WLSExecuteRequest.run(WLSExecuteRequest.java:118)
          at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
          at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
  .>

  Published by: SteveElkind on April 13, 2011 05:50

  I see these possibilities:

  -Cross over the security of the domain (like atheek1 mentioned).
  -Transaction timeouts are too short (I think that there is a default configurable large area, as well as the ability to define a basis of CMT or BMT. waiting periods)
  -Configuration has a duplicate name.

  It is not required to nominate every single store between areas, is not generally necessary to ensure that each JMS server is named unique (even if it can help in certain use cases).

  WebLogic requires the following when you work with several areas:

  -Each unique domain name.
  -Name of the each server wl unique, even if in different areas.
  -Name of the each server unique, even if jms in different areas (is usually not necessary - and not the problem in this case - but you should do it anyway).
  -Name each unique, even if saf agent in different areas (is usually not necessary - and not the problem in this case - but you should do it anyway).
  -Configure the security of the area.

  For a bit more details, see the "best practices" section of the JMS configuration edoc.

  Tom

  Published by: falls on April 13, 2011 09:33

  Published by: falls on April 13, 2011 09:35

• Turn off NEW HARDWARE FOUND in XP Home Addition

  You can turn off the new hardware detected alert for a motherboard ethernet device mounted?  Recently, I added a PCI Ethernet card and the alert happens every time I log in
  Presario 6140nx AMd Athlon XP2000 + Windows XP home SP3

  Well don't I feel stupid now

  Difficulty to enter the CMOS configuration at startup and disable the onboard easy Lan

  Problem solved

• A new hardware found' and auto installation of older drivers

  Original title: "drivers."
  No matter what I do windows detects hardwear and starts to install the old drivers, even after that iv uninstalled them. can I stop the windows vista 64-bit I auto installing older drivers, and if yes how, iam running ati amd 8.5 drivers now for two years.

  Hello

  What device driver are you trying to install?

  
  You can follow the steps in the link and check out:
  Go to control panel and click on performance and Maintenance.
  a. click on system.
  b. click on the material.
  c. click Device Manager.
  d. at the top, click on view.
  e. click on view devices.
  f. find printer listed here, right click on it and delete.

  See also the suggestions provided in the link for more information:
  The new hardware wizard may detect the printer device after every restart of the computer.
  http://support.Microsoft.com/kb/298370
  Applies to Windows vista as well.
  Registry warning:
  Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows: http://windows.microsoft.com/en-US/windows-vista/Back-up-the-registry

  For more reference
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/how-do-i-stop-Win7-from-installing-display-drivers/046782c4-A401-4ECF-bf4a-940327622fbe

• Email error message keeps appearing at the opening of my mail on Windows Live

  The following is a detailed description of my question that Windows

  has suggested that I try with you to help me so that they could not

  or has not solved for me...  HELP please.

  'http://mail.services.live.com/DeltaSync_v2.0.0/Sync.aspx '.
  Windows Live Mail error ID: 0x8DE20003

  Above fault keeps appearing and don't know how to correct it.
  An early response would be appreciated...
  Thanks & best regards, Brian.

  The KB on this page usually helps: Windows Live Mail error: 0x8DE20003 or server error: 3204. This works for Windows 7, despite the warning, as you can see.

• I am trying to install an hp 26 series printer and can't keep themselves hardware found message Setup then tells me it cannot locate the software

  the hp 2600 is a plug-and - print printer

  Hi Mike,.

  What is the model number of your printer?

  If you use the Plug-and-Play HP Color LaserJet 2600n printer, you can follow this link & check if the problem persists:

  Installation & configuration issues

  
  Reference: Setup, install and configure

  HP Color LaserJet 2600n Plug-and-Play package

  Hope the helps of information.
  Please post back and we do know.

• c:\WINDOWS\iweqevoyoxaj.dll message keeps appearing on desktop when starting up__it said that the specific module could not be found.

  On the desktop at boot

  This file was probably part of a virus or spyware infection that has been partially removed. Run a full scan for virus/spyware.  If the problem persists, use the free Windows Sysinternals Autoruns tool to find and remove the reference to the file.

  For more information about how to use the Autoruns, please see:

  Autoruns for Windows Windows Sysinternals Autoruns Forum

  Boulder computer Maven
  Most Microsoft Valuable Professional