New HP Pavilion Slimline, does not recognize mic in the webcam.

Similar Questions

• Cannot add any material and my computer does not recognize one of the ports

  my computer won't recognize any port or plug and play devices. map of my camera not recognized when I insert in the port.my computer does not recognize one of the ports and if I try to download a driver for the printer, it starts and stops before installation. The computer had crashed and went blank. So I had to get a new hp boot disc and install it. Since then, it has happedned

  Hi gramward1,

  We recommend all first download and install the drivers for the chipset on the computer and check the difference.
  To download the driver, visit the website of the manufacturer of the system.

  Step 1: You can also try to search for the hardware changes and check if the device is detected on the computer. To do this, try the following steps:
  a. connect any USB device to the computer.
  b. Click Start, click Run, type devmgmt.msc, and then click ok.
  c. in the list of items, click one of the items, click the Action menu and click scan for hardware changes.
  d. check if the device is detected.

  Step 2: Try to remove and reinstall all USB controllers
  a. Click Start, click Run, type devmgmt.msc in the Open box and then click OK.
  b. in the list of components, expand Bus USB controllers.
  c. right-click on each device under the Bus USB controllers node and then click on uninstall to remove them one at a time.
  d. restart the computer once you have removed all the USB controllers.
  Note: USB controllers automatically install after you restart the computer.
  e. plug the removable USB storage device and perform a test to ensure that the problem is solved.

  If the problem persists, run Microsoft he difficulty of this article: http://support.microsoft.com/kb/925196

  Visit our Microsoft answers feedback Forum and let us know what you think.

• iTunes on pc does not recognize my iphone. the pc does. the iphone asks me to allow access to what I do

  iTunes on pc does not recognize my iphone. the pc does. the iphone asks me to allow access to what I do

  Hello

  Check this help page: If iTunes does not your iPad, iPhone or iPod - Apple Support

• One of the USB devices attached to this computer has malfunctioned and Windows does not recognize it. The location is the root (2 ports) USB hub: 1-unknown device and Port 2-not used

  Original title: USB device not recognized

  Over the last 2 weeks, I get a message on a USB device.  The message said that one of the USB devices attached to this computer has malfunctioned and Windows does not recognize it.  The location is the root (2 ports) USB hub: 1-unknown device and 2-unused Port.  I have no idea what it means.  I hesitated to first click the icon (it does not last very long) thinking it could be a scam.  Can someone help me?  Thank you.

  Hello

  (1) is the specific question of specific USB devices?
  (2) did you of recent changes to the computer before the show?
  (3) have you tried plugging the USB stick on another computer?

  (4) what is the brand and model of the computer?

  I suggest to refer to the following methods and check if it helps to solve the problem.

  Method 1: Hardware devices do not work or are not detected in Windows

  Run Microsoft Fixit mentioned in the article.

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  Method 2: USB Port may stop working after you remove or insert a USB device

  http://support.Microsoft.com/kb/817900

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: 322756 How to back up and restore the registry in Windows

  Reference:--

  Advanced troubleshooting tips for General USB for Windows XP problems: http://support.microsoft.com/kb/310575

• When you try to import video JVC DVC using Movie Maker, Movie Maker does not recognize DVC using the IEEE 1394 cable

  Windows movie machine to import JVC DVC with cable IEEE1934.

  When you try to import video JVC DVC with movie maker. Filmmaker does not recognize DVC using the IEEE 1394 cable. How can I me Movie maker to see the CVN. Using XP SP2.

  Perhaps the following links will help you get started:

  Movie Maker and JVC Camcorders
  http://Papajohn.org/mm2-camcorders-JVC.html

  Movie Maker 2 - importing files MOD
  http://Papajohn.org/mm2-importing-video-mod.html

• Desktop Pavilion a6750f does not recognize Realtek NIC card in Vista 64

  I have a Pavilion a6750f desktop that had a hard drive failure. I bought a new drive and installed Vista 64, but I can't get internet connection! It does not recognize Realtek RTL 8111 (I think, memory - I'm at work) NETWORK adapter in Device Manager driver, and I can't find the right one!  HP is sending me software on a replacement drive, but I can't wait 5 more days to get. Help, please.

  Your Vista drivers are displayed. First Chipset ATI installation and then the LAN driver_though he says Nvidia which I believe is wrong driver:

  http://h10025.www1.HP.com/ewfrf/wc/softwareList?OS=2100&LC=en&DLC=en&cc=us&lang=en&product=3872428

  Try > Realtek LAN Driver:

  FTP://ftp.HP.com/pub/softlib/software10/COL27192/PV-67752-1/sp40945.exe

  If no joy remove the 8111C Ethernet driver Realtek:

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=13&pfid=5&level=5&Conn=4&DownTypeID=3&GETDOWN=false

• New computer: DVD player does not recognize discs

  I have this computer (HP Pavilion) about 3 months ago. It already came with windows 8 when I got it, is not a recent issue of download. When I put a game disc in the DVD drive for installation, it is yet to report an error, simply, it does not recognize the disc. I tried with a DVD film as well, and it's the same thing. I never used the drive before today and was super disappointed that it didn't work. New: what's more relative than all works do not, is that the system does not recognize the potential error.

  Hello

  Thanks for posting your request here in the Microsoft Community.

  This would have occurred because of hardware or software related issues. I would like to know some information about this problem so that we can help you further.

  1 have you checked the device status in Device Manager?

  2 did you changes to computer settings prior to this problem?

  I would suggest trying the following methods and check if it works for you.

  Method 1:

  Run the hardware and devices Troubleshooter and check if that helps. It is an automatic convenience store to help you solve common problems with equipment and other devices.

  Follow the steps to run the Troubleshooter:

  1. Press Windows + Q on your keyboard to display the bar of charms.
  2. Troubleshooting type, and then click Troubleshooting under settings.
  3. Now, type Hardware Troubleshooter in the option Search .
  4. Click on the convenience store equipment and devices and follow the instructions to run the troubleshooter.

  Method 2:

  Try installing the latest drivers, including drivers for the chipset and check if the problem persists. This is to check if the problem is caused due to any driver related issues or not.

  See the following Microsoft Help article to download and install the drivers.

  http://Windows.Microsoft.com/en-us/Windows-8/all-drivers

  Note: the steps for Windows 8.1 also applies to Windows 8.

  Please reply with the status of the issue so that we can better help you.

• Impossible to install photoshop cs3 on my new windows 7 pc, does not recognize the serial number

  help can't install my drive photoshop cs3 on new pc windows 7, but eventually downloads does not recognize serial number

  Hi hope dt,.

  Photoshop CS3 is not tested on Windows 7 and you could face compatibility problems.

  For serial number errors, please see: http://helpx.adobe.com/x-productkb/global/my-serial-number-doesn ' t - work.html

• HP n208tx... headphone microphone combo does not recognize mic

  When I try to connect any headset combo hp having even taken for headset and microphone both... the laptop recognizes no sound speak into the microphone. but I can hear songs in the helmet. Any solution?

  Hi ujjwal258518, welcome to the Forums of HP. I understand that your microphone does not work in your combined port. Unfortunately, it behaves as expected. The combo Harbour will not work with the only micro devices, it must be part of a communications headset/microphone device. The other possibility is to get a USB microphone.

  As described in the user guide: "If you get a microphone/headset device, make sure that the power cable of the unit has a connector 4 pin that supports audio output (headphone) and audio (microphone)."

  Page 6 shows the right side. Section 3 describes the combo Harbour: User Guide

  I hope this helps.

• New portable Windows 8 does not recognize the printer, even if the printer says that it is connected.

  My old laptop fried, so I bought a new laptop which had Windows 8.  My printer is a Photosmart 5510 series B111A #CQ176A and at first my printer was not compatible, so I downloaded the software from the HP that make compatible site.  It worked, but then I was printing my grades I dreamily turned off my laptop.  The printer stopped at halfway, so I turned on my computer laptop back but the printer does not continue.  I cancelled the event and tried to reprint it, but then my printer not responding.  All my reprints AND the original print stuck in the queue and my microsoft word (2013) says the printer is offline, but the printer itself said it was online and connected.  I tried the HP Scan doctor or what it's called and it said nothing was wrong and it printed a test page. However, when I tried to copy my notes he would not answer.

  Finally, I uninstalled the software and reinstalled.  He said that my printer connected successfully, but microsoft word does even not list my printer even if my printer says that it is connected.

  Nobody knows how to help me?  I'm not very technical so please, if you could provide easy to follow instructions, I would be grateful, thank you.

  Take a look at this linkHP.

• Windows 8 does not recognize most of the new software CD how can I download new printer drivers?

  Once more, Microsoft has outdone himself. The previously blindingly simple and obvious has been complicated to make incredibly frustrating and painful for users of the new version of windows. Why in the world 1/2 old software CD automatically recognized by Windows 8 and the other 1/2 no? None of these programs and their CDs are particularly old or dated. Worse still, I have a Canon printer and rickety Windows 8 will not load automatically when I insert the installation CD. And windows does not show the CD when I do a search in D: drive. How and why are you people so incompetent?  I'm sorry to be rude and mean, but seriously. The whole bloody point of tech and people like you is to operate more easy is DO NOT IMPOSSIBLE, TIME CONSUMINGLY DOULOUREUX.

  Hello

  Just kind of guessing here, but you could browse through your control panel... "AutoPlay" settings and see if it can just be a problem with setting...

  Another possibility is that one of your programs blocking access to some of the CD...

  Some programs have the option of 'Ownership' of your drive, for lack of a better description...

  iTunes can possibly do this and some CyberLink programs... There are other institutions...

  Another possibility is that some of them may be blocked by Windows because of compatibility issues...

  Some windows updates do precisely that for some programs.

• Pavilion a6544f does not recognize SATA hard drive

  I'm running Vista on this machine and added a second internal hard drive: a WD Caviar 1 TB GB. I connected the SATA cable to the SATA connector to blue color on the motherboard (Benicia-GL8E) and had to get a 4 pin to SATA power plug on the power cable.

  For some reason the drive does not appear in my computer. I double checked connections and seem not to be tight. I installed WD Data Lifeguard (supplied with the HD) and he can't seem to mfind player either.

  Any suggestions?

  Thanks in advance.

  Roorider

  In fact, I solved the situation by updating the BIOS on the HP support site. I've updated everything I could - firmware and everything - wheile I was there, and then the disc was recognized. Problem solved! Thanks for the suggestions.

  roorider

• My new Sony Vaio PC does not recognize my Sony Handycam DCR-HC19E model. I have no installation CD. How can I connect two devices, please?

  Previously, I had a Fujitsu Amilo PC operating Windows XP Professional. I had no problem with these 2 devices of connection. Now, I bought a Sony Vaio PC

  Windows 7 Home Premium and it can not recognize my webcam. I bought a cable iLink (hama), but without success.

  What can I do, please?

  Hello

  Method 1.

  Connect the device, run the hardware and devices Troubleshooter and check if that helps.

  To open the Troubleshoot utility equipment follow the given link:

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  You can also check the updates available for your computer.

  Method 2.

  Install a USB device: http://Windows.Microsoft.com/en-us/Windows7/install-a-USB-device

  Refer.

  You need to contact Sony support to get the disc because it contains software of camcorder. You should also check the camcorder manual as it contains instructions to enable the USB setting in the camera for it to get detected in Windows 7 computer.

  The KB article for the Sony camcorder is:

  http://www.KB.Sony.com/selfservice/microsites/search.do?cmd=displayKC&docType=kc&externalId=C499324&sliceId=1&docTypeID=DT_KNOWLEDGEARTICLES_1_1&dialogID=553948590&StateID=1%200%20553950910

  Hope this information is useful.

• My computuer does not recognize me as the system administrator - cannot install or remove programs

  For some reason, I'm able to do some updates on my laptop, but I can't install or remove all programs, even though I am the administrator (and the only user in addition to comments). I get messages that this "installation is forbidden by system policy" or "you don't have write permissions. I tried to restore the system to a point before all that is going on has begun, but no luck. Any help here? Thank you!

  Hi g.narvaez.3,

  Thanks for posting on answers.microsoft.com community forum.

  According to the information provided, I look into the creation of a new user with administrator rights and check if the same problem occurs on this user.

  Here is a link to create a new user.

  http://windowshelp.Microsoft.com/Windows/en-us/help/68a1c4fd-B3F6-4cb9-93a1-8a6023836e531033.mspx#E1D

  If it does not work on this user account, your user account may be damaged.

  Here is a link to troubleshooting corrupt profiles.

  http://windowshelp.Microsoft.com/Windows/en-us/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  Please let us know if the new user has the same problem or if additional assistance is needed on this issue.

  Kind regards

  Debbie Microsoft Support Engineer answers visit our Forum of Microsoft answers Feedback and let us know what you think.

• Access point Cisco does not recognize correctly entered the WPA pre-shared key

  My router is a Cisco DPC/EPC2325 DOCSIS residential gateway with wireless access Point. When connecing to Internet via a wireless adapter, this device does not accept the good WPA pre-shared key. I have no similar problem with another PC. Please notify.

  You mean that you corrected it?
  Great! Thanks for sharing this info with us!