New icon for the application of new incoming message after...

Similar Questions

• How to change the icon of the Application on Blackberry JDE 6

  Hi, do someone know how to change the icon of the application of the project, we have created in the JDE? I searched the forum, and suggestions should go to the project properties, go to the "resources" tab and add the icon file. I have also included the file icon (PNG 68x68pixel) to the project.
  But this does not seem to work for me.
  I also tried to build clean, remove files jad and others, always not when I tried the app Simulator or on real device. Any help will be appreciated.
  I use Blackberry JDE 6, test the application on the actual device (9800), Simulator (9700). And the app that I'm testing is just a pushscreen simple helloWorld app, not a lot of code here. Thank you.

  Here's how to put the icon in BlackBerry JDE.

  1. Add the image to your project.
  2. Right-click on the image and choose Properties.
  3. Check "use as icon for the Application.
  4. Rebuild the application.

• Trying to install Firefox 4.0, when I move the Firefox icon to the Application icon (in the dmg file) I get message that there is a newer version, but the version he is 3.6. What is going on?

  I have Mac OS 10.5.8 and Firefox 3.6.16. I am trying to install Firefox 4.0. I downloaded the dmg file, opened it, and flies over the Firefox icon to the Application icon. The result was a message saying:
  "A new already called"Firefox"exists at this location. You want to replace it with the older one you are moving? »
  I checked the Firefox already in my Applications folder and it is without a doubt 3.6.16, I hesitate to go ahead with the replacement until I know why I get this (apparently) wrong message. Can you help me?

  Yes, Firefox 4.0 is a more advanced than 3.6.16 version.

  Mozilla made the updates of security for older versions of long after a new version of Firefox is available. 3.5.18 Firefox came out at the same time that 3.6.16, and both are scheduled for another update daily now.

• Lack of Options > Advanced Options > Applications entry for the application of Simulator test

  I'm new to BlackBerry dev and I'm still doing my set up and tested development env.

  EPS consists of XP, Eclipse SDK 3.4.1 BlackBerry JDE plugin for Eclipse 1.0.0.67, BlackBerry component Pack 4.3.0.16 version 4.3.0 and the BlackBerry 8120 Simulator.

  I created a test application simple and loaded on the Simulator for testing through the cmd Eclipse Run > run as > Blackberry Simulator.  As expected, the application icon was displayed on the screen of the Applications (in the Simulator), and, when selected, the application has successfully launched and behaved normally.  So far so good.

  However, when I checked the Options > Advanced Options > Applications on the Simulator, I found that my request was not among others installed apps.  (I tried on two other simulators with the same results.)  I thought about reading the other posts on this forum that I would wait to see this information.   When I install on a simulator I would indeed expect display name information and the app version contained in Options > Advanced Options > Applications list?  If Yes, what should I do to make the information appear?

  Thank you.

  If you install your app in the Simulator simply by copying the COD file in directory of the Simulator (what is JDE when you run Debug), then you should not wait for the application to create. The modules in the files of the cod will be stil it well and that's all that generally the County. You can see the list of modules under Options-> Advanced Options-> Applications-> (Menu)-> Modules. Applications that are included in the Options-> advanced-> Applications are just constructions of metadata on top of modules to simplify various tasks, like setting permissions, adding and removing applications rather than tracking dependencies and individual modules.

  PS, You can programmatically create the entries in the application using the CodeModuleGroupManager and CodeModuleGroup if you really must have your request under Applications. Do not however forget that classic pose methods (Desktop Manager, Web OTA Download, BES OTA Push) all create them the entries in the appropriate application. So, you don't usually have to worry about this problem in the production environment.

• icon of the application 86 x 86

  Hi all

  for info. I read again the instructions for user interface document. It seems the new changed guideline.

  For the application icon, it is not more than 90 x 90, now it's 86 x 86.

  (An icon that is superior to 86 by 86 pixels is not displayed on the screen.)

  @T55555, Yes, you need both.

  One who was formerly 90 x 90, and from Beta 3 SDK must be 86 x 86 (with the main part of the image that is actually in the region around 77 x 77), is intended for the device itself.

  The 480 x 480 is what is displayed as the App World icon.

  I use Inkscape to generate such things and I just export as Bitmap image with two different resolutions and the two look impeccable.  (I actually tweak them slightly so they are not exactly the same, but anyway, it's very simple.)

• Upgraded main icon of the application of the only question

  Hi all

  on July 6 I uploaded to the AppStore, one question and everything worked well, the app is on the AppStore.

  I week later, I need inizialize my computer (I have a clone made with clone copy to hard drive, of course) and now I need to change the main icon of the application, because that's not going to.

  I have all the files items in the same position of the date, I have create the app from Adobe InDesign CS6.

  I don't need to change the icon above the name of the application in the AppStore.

  Unlikely, my DPS tell me that it is impossible to find the original folio or resource files are transferred from the original location, so I can't change the soft inside DPS App Builder and I can't replace the icons (I have all of the necessary icons ready to download).

  
  I don't want to create a new InDesign application, because I don't want to risk something change, just need to change the icon and some metadata. No problem to change metadata in iTunes Connect.

  Please, can someone tell me how to change the main icon of DPS when the computer does not find the original .folio such as the computer was formatted?

  How can I "d - link" a new .folio without creating a new application with a new name, but only to make an upgrade of the existing application?

  I apologize for my bad English, and I thank you in advance for your kind reply.

  Michela

  Hi Michela,

  You will need to submit a new application. There is no way to recover the file .folio if the computer that you used has been formatted.

  Neil

• Change the icon of the application

  Hello. Recently, we changed the name of one of our magazines. Our representative Adobe told us to simply all be updated without changing the connection from Adobe that is used to create the magazine. In this way we can keep all our readers without restarting. Everything has been approved by Apple and the app is now online, but the icon of the application has not changed. It's still the old icon with the old name even if all new art has been used to create the application from the manufacturer of the Viewer. Is it possible to change this? It is obviously a huge problem for us. Any help would be greatly appreciated.

  Thank you

  Luke

  Hello

  I know this post is a few months old now, but we finally received a final resolution and I will post it here in case anyone needs it in the future.

  For us, just submit a new version of the app with a new icon embedded in the binary file of the manufacturer Viewer wasn't enough to get the graph of store to change. I spent some time talking with Apple and we have solved this problem by taking the following measures.

  The large icon is a field locked according to apple. It cannot be changed when the application has been removed from sale. This opens the possibility to change the icon of the application. When you send a traditional patch, previous version stays live for sale until the update is approved and either it will automatically to the top, or you realease yourself. This is a problem if you want to change it the great App (graphic store) icon. So if someone never changes the art of the icon/name of an application curretnly exist here are the steps we had to take.

  -In iTunes connect go to rights and pricing. Click on the SPECIFIC STORES in the line of text at the bottom of the window.

  -Click unselect all, and then save inside (CAREFUL, this removes the App from the view of the public and put it into a State called DEVELOPER OFF OF THE SALE). It will be down for all the time that take you these steps.

  -Now that the application is in the developer removed the State from selling the icon field bigger app is unlocked and you can submit a new version.

  -When you change new metadata of versions, you will see a tool now, that allows you to change an icon great app. This is where you can load into your new 512 x 512 icon.

  -Once everything is ready with your new version of iTunes Connect, download your new binary version you have made to the manufacturer of the Viewer. You can use the existing application in designer Viewer, just replace all of the appropriate art and change the name if necessary. IMPORTANT - If you do not lose your current audience, do not change the identification code Adobe allows you to submit the folios. The Adobe ID, it's what ties all of this together, change would be catastrophic.

  -Then simply wait for your new application to be approved. Once, go back to rights and pricing and turn on the appropriate areas where you app must be sold and you're done.

  We have spent a lot of time trying to get this right, so I hope this helps someone in the future.

  Thank you

  Luke

• This computer is no longer allowed for the applications installed on your iPhone

  I tried to sync my iPhone 6 more with iTunes in my MacBook Pro.  During this process, a window popped up that says, "this computer is no longer allowed for the applications that are installed on the iPhone" iPhone 6 more "." You want to allow this computer to items purchased from the iTunes Store? »

  I clicked on allow and another window popped up that says, "Enter Apple ID and password.  If you have an Apple ID and password. Enter them here. "(If you use the iTunes Store or iCloud, for example, you have an Apple ID.)  "You can authorize up to 5 computers for each Apple ID."

  Apple has recently replaced the logic board on my MacBookPro (early 2011).

  There are 3 iCloud Apple ID.  First of all, I allowed my MacBook Pro.  Then he asks the password of the Apple ID for my iPhone 4.  While I was still with my iPhone 4, there was a problem and Apple technology had me install a new Apple ID.    Then I was asked for passwords for the Apple ID for iPhone iPad Air and 6 more.  Then another pop-up window says, "the authorization of the computer succeeded."  "You have allowed 5 computers on your 5 available."

  This could be 5 'computers' if Apple still has the original map of the logic.  It is always 1 MacBook Pro, which has a new logic board and if I called the Apple Support, I guess the UUID hardware is Apple going to buy and I did that for this new logic board, but not for the old.  I would have thought when the old logic board has been subscribed by technology, he or she would have known in order to erase the original UUID for my MacBook Pro in the main Apple system and replaced it with the new.  BTW, the old logic board works great.  It was the video card that was bad and my computer has a problem to wake from sleep or boot.  Everything worked very well when I took it for repair, so technology might have gotten the UUID of the old logic board.  Since I'm not a computer tech, I'm probably missing something.  I don't understand why I had to do it all.

  So, how can I get this problem fixed then the old logic board is not counted?

  Thanks in advance!

  Note: where it is said to 'Select a category', 'importing & Burning in iTunes', was the closest I could come to picking a category.  If I posted this in the wrong place, please move to the community right and made me know.  Thank you!

  You need not do anything.

  If, in the future, you need a permit for a new computer, then just reauthorize all, then allow all of your active computers.

• Apex 5 on PDB not work. works very well on the root - ERR-7620 could determine no workspace for the application (4500)

  Hi all

  I recently installed Oracle 12 c and Apex 5 on a new server.

  My apex 5 installation went well. I can access it without problem at the root on its default port 8080.

  Later, I created a new pdb file (cloned from pdborcl) and created a new schema.

  as sysdba, I started a new instance of the Apex on port 8888, but when I try to access it through the http://IPAddress:8888 / apex / or apex / http://IPAddress:8888 / apex_admin I get an error (see pictures below)

  Can someone tell me please in the right direction.

  Should I do an install fresh apex 5 on the PDB? I thought that if I installed as sysdba on the CBD, the pluggable DB would inherit apex 5. Help, please

  ERR-7620 could determine no workspace for the application (4500)

  ORA-01403: no data found

  
  

  (DOES NOT NOT ON PDB)

  

  
  

  (WORKING ON ROOT)

  
  

  
  

  
  

  Hi John,.

  What you said is exactly the problem you will encounter if patch 20618595 of the database is not applied before the APEX upgrade to 5.0. In addition to the opatch apply the approach, you also run $ORACLE_HOME/OPatch/datapatch? At run time, you guarantee that all-ins databases have been opened after the start of the database to the top by issuing alter database connectable to all open?

  Finally, you have indicated that you have installed it on a new server. Is your main interest just to have a new 12 c CBD with APEX 5.0 in it? If Yes, you can do the following to avoid the problem you are experiencing currently.

  (1) create a new 12 c CBD

  (2) connect SYS as SYSDBA to CBD$ ROOT and launch a 4.2.5 or newer version of apxremov_con.sql. If the database that you created in step 1 is 12.1.0.2, you can just use $ORACLE_HOME/apex/apxremov_con.sql

  (3) connect SYS as SYSDBA to CBD$ ROOT and run apexins.sql from the source 5.0 specifying positional parameters, as you normally would

  Kind regards

  Jason

• Change password for the application from the apex

  Hi friends,
  
  I created an application of database in the apex, for this application in the login page, that I need to set as
  
  Forget the password link or change the password link, assume that if the end user clicks that link means, there ask for the
  
  New password: and confirm password
  
  shortly after he entered the password if the user connects to the application of the means, he needs to go inside the application. .........
  
  
  Normally to reset the password for the end user for the application, we will do it on the side of the administration of apex
  
  It is that we will give RESET PASSWORD OPTION to change the password for the end user...
  
  My question in this sense, that the end user must change his password by itself in the front end application...
  
  It is possible to like that in the application of the apex...
  
  How friends,
  
  Kind regards
  Mini...

  The problem is that you have specified a different page than the page of connection (due to which your login page used the builtin page). During the passage of the authentication, you must specify that 101 is indeed your login page (disabled by default)

  Here's a screenshot of it.

  So, in your workspace, choose current change, choose the authentication name and when you get to this screen tick the checkbox and submit. You should be prompted for your login page (which corresponds to the theme). This should solve the problem.

• Urgent - Custom authentication and authorization for the application of the ADF

  Hi friends,
  
  Custom implementation for authentication and authorization for the application of the ADF
  
  My project to use the OID , authentication and authorization, we will need to support both OAM and DB tables ( according to the preferences of the client during the installation ).
  
  I am new to this and do not have a clue about the same.
  
  Please guide me how to set up both in JDeveloper 11 g + ADF
  
  Thanks in advance.

  The answers you got up to present every point in the right direction. ADF security see the authentication of WLS, even for business authorization with respect to user roles defined on the WLS server. During the deployment, ADF security defined application roles are mapped to the user enterprise groups

  Application developed using Jdeveloper ADF +.

  This would use WLS for authentication

  Users of authentication - LDAP (OID) - are stored in LDAP

  Use the OID authentication provider in WLS

  Authorization - OAM or database (authorization details are stored in the DB or OAM tables)

  You can't allow users without authentication. If you need create authentication providers additional if they exist for OAM and RDBMS (there is a supplier of existing RDBMA, that you can use to identify users and to assign membership user groups). Then, you set the optional flag so that when authentication fails for additional providers you can always start the application.

  When running Admin users - create users from roles to create and assign permission privileges to the role (for pages and workflows)
  assign (or remove) the roles to/to leave users.

  ADF security uses JAAS to permissions that you can change using Enterprise Manager when running. Permissions are granted to the application roles and application roles are granted to business roles that which then has users become members of the. If you want to change the status of user account, then you don't do this the ADF or EM, but use a direct access to the provider of the user (for example, access OID, RDBMS access etc.) There is no unified administration API available that would allow you to do this via WLS (which uses OPSS).

  If your question is in the context of the ADF, the documentation, with that you should follow is OPSS and WLS authentication providers.

  Frank

• Oops - remove icons for default applications

  I deleted icons for the default applications on my homescreen. Can open applications using Siri, I would like to get back them on my home screen.  Is this possible? Thanks for any help.

  May have accidentally moved the application to another screen icons.

  Drag across your screens...

• my phone does not work after last update itunes on my phone connection with my pc, it shows only i tunes icon and the application of itune on my pc does not work

  my phone does not work after last update itunes on my phone connection with my pc, it shows only i tunes icon and the application of itune on my pc does not work

  For general advice, see troubleshooting problems with iTunes for Windows updates.

  The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach.

  Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.

  More information area has direct links with the current and recent buildings if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit-for old video cards) as a workaround for problems with installation or operation, or compatibility with QuickTime software or a third party.

  Backups of your library and device should be affected by these measures but there are links to backup and recovery advice there.

  Once iTunes to work properly, you should be able to fix your device.

  TT2

• More of an icon of the application of Maxthon in my mix of Volume in Windows 7

  Hey... I would like to report a problem with my volume mixer in Windows 7... She had that Maxthon two icons of the application instead of one as I watched the videos on YouTube... could I you guys please mush these two together and fix my volume mixer... He kept leaving Maxthon to copy... Please fix so I can see it again... Please do the single Maxthon application to my Volume mixer icon play videos on YouTube and let YouTube stay on a mode bit... Please... it'll be nice if YouTube and the videos were the same icon as Deviantart and other Web sites please.

  Thanks for reading.

  Warmly, best regards,.

  Ayla

  Hello

  Thanks for posting your query to the Microsoft forum. I will definitely help you with this.

  This could be due to changes in the Basic with the Maxthon browser settings.

  You can Uninstall and reinstall the Maxthon browser and also update the audio driver, restart the computer and check the issue.

  This should solve the problem, let us know if you need more assistance. We will be happy to help you.

  _______________

  Thank you best regards &,.

  Isha Soni

• How can I change an icon for the device in Windows 7?

  How can I change an icon for the device in Windows 7?

  In 'Control Panel\Devices and printers' I want to change the icon of a device that there are listed.

  Hi Dave Tavres

  I'm afraid to say that you would not be able to change this icon.
  This icon is provided by the hardware manufacturer, and is included in the drivers and architecture has no Windows allows to change this information.
  However, you can use the third party applications to change. Use your favorite search engine to find on the Internet.

  Important note: This response contains a reference to third party World Wide Web site. Microsoft provides this information as a convenience to you. Microsoft does not control these sites and no has not tested any software or information found on these sites; Therefore, Microsoft cannot make any approach to quality, security or the ability of a software or information that are there. There are the dangers inherent in the use of any software found on the Internet, and Microsoft cautions you to make sure that you completely understand the risk before retrieving any software from the Internet.

  It will be useful.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.